Riyadh Azzubaidi

University of Baghdad · Department of Water Resources Engineering

The hydraulic conditions of a flow previously proved to be changed when placing large-scale geometric roughness elements on the bed of an open channel. These elements impose more resistance to the flow. The geometry of the roughness elements, the numbers used, and the configuration are parameters that can affect the hydraulic flow characteristics....

This research aims to simulate and use Computational Fluid Dynamics, CFD, to control the propagation of salt wedges. The flume has a cross-section of 25 cm in height and 7.5 cm in width with a length of 6 m and a zero slope. The simulated model is used to investigate the use of inclined roughness elements to control the propagation of salt wedges....

Erosion and deposition are natural phenomena in rivers that can be identified by using velocity profiles and shear stress as indicators. The Shatt Al-Arab River located south of Iraq suffers from these phenomena. Based upon the basic principles of hydraulics, it is reasonably easy to identify shear stress distributions within the river reach of the...

Accurate computation of the roughness coefficient is important in the studies of open channel flow. To measure and identify the hydraulic characteristics of the flow system, the model simulation is necessary to study and get the results of the hydraulic properties to specify Manning coefficient of the Euphrates River. In this study, the reach is ex...

Roughness elements is one of the solutions use to protect open channels from erosion and sedimentation. It can be large stone or concrete blocks placed at bed of the channel to impose more resistance in the bed. The geometry of these roughness elements, and their configuration are parameters that play an important role in changing the hydraulic cha...

This study aims to numerically simulate the flow of the salt wedge by using computational fluid dynamics, CFD. The accuracy of the numerical simulation model was assessed against published laboratory data. Twelve CFD model runs were conducted under the same laboratory conditions. The results showed that the propagation of the salt wedge is inversel...

Many studies indicated that some of raw water properties can be improved as it passes through magnetic field. This improvement was proved to have useful applications in many fields. Such improvement can be useful in increasing the efficiency of leaching salty soils. In this paper, an experimental test rig was designed and constructed to investigate...

Diyala Governorate was recently exposed to high flood waves discharged from Hemrin Dam. Since the dam was at its full capacity during the flood period, these waves were discharged to the Diyala River. Because of the reduction in Diyala River capacity to 750m3/s, the cities and villages on both sides of the river banks were inundated. Thus, the stud...

Diyala Governorate was exposed recently to high flood waves discharged from Hemrin Dam to Diyala River when the dam reached its full capacity. The recently recorded discharge capacity of Diyala River was reduced to just 750m3/s. This exposes cities and villages along the Diyala River to flood risk when discharging the flood waves, which may reach 3...

Many studies and researchers have reported significant evidence that some physical properties of water can be changed as it passes through a magnetic field that can improve water use. This can have a promising potential for applications, especially in the fields of irrigation and drainage. In this research, magnetized water was used to leach salt-a...

This study aims to investigate the variation of profiles and propagation of salt wedge. It also aims to investigate the use of air and water curtains in controlling its propagation. A laboratory flume system was prepared to simulate the propagation of the salt wedge. Relations between the profiles and propagation of salt wedge and the discharge of...

Dissipation Energy of Flow by Stepped Type Gabion Weir

Large-scale geometric roughness elements is one of the solutions that is used to protect openchannels from erosion. It is use to change the hydraulic characteristics of the flow. It may be concrete blocksor large stone placed at the bed of the channel to impose more resistance in the bed. The height of theseroughness elements is an important parame...

This paper presents a numerical simulation of the flow around elliptic groynes by using CFD ‎software. The flow was simulated in a flume with 4m long, 0.4m wide, ‎and 0.175m ‎high ‎‎with a constant bed slope. Moreover, the first Groyne placed at 1m from the flow ‎‎inlet with a ‎constant the Groyne height of 10cm and a 1cm thickness, and the ‎width...

The hydraulic behavior of the flow can be changed by using large-scale geometric roughness elements in open channels. This change can help in controlling erosions and sedimentations along the mainstream of the channel. Roughness elements can be large stone or concrete blocks placed at the channel's bed to impose more resistance in the bed. The geom...

There are many wadies, and streams crossing the Iraqi-Turkish and Iraqi-Iranian borders and some of these are permanent and others are seasonal. Most of the catchment areas of these rivers, wadies and streams lie outside Iraq. In this paper, an extensive review of literature related to these rivers, wadies, and streams crossing the Iraqi border was...

The current study focus on the effect of using stepped gabion weir in a laboratory channel on the hydraulic jump distance which form at its toe. A series of 175 operation tests and 25 laboratory experiments were conducted by using a laboratory flume with dimensions of (10 m * 0.3 m * 0.5 m) long, width, and height.

The present study investigates the effect of using stepped gabion weir in a laboratory channel on the distance of the hydraulic jump. A set of 25 laboratory experiments and 175 operation tests were conducted using a laboratory flume with dimensions 10 m long by 0.3 m wide, and 0.5 m high. The tested gabion weir had different five possible lengths 0...

The present study investigates the effect of using stepped gabion weir in a laboratory channel on the distance of the hydraulic jump. A set of 25 laboratory experiments and 175 operation tests were conducted using a laboratory flume with dimensions 10 m long by 0.3 m wide, and 0.5 m high. The tested gabion weir had different five possible lengths 0...

The present study aimed to investigate the effect of using the conventional (rectangular) shape of gabion weir in dissipating the energy of flow. For that a series of laboratory tests (25 experiments and 194 test runs) were conducted on the gabion weir by using of a laboratory flume of 12 m long by a cross section of 0.3 m width, and 0.5 m height t...

This study was conducted to examine the discharge capacity of the reach of the Tigris River between Kut and Amarah Barrages of 250km in length. The examination includes simulation the current capacity of the reach by using HEC-RAS model. 247cross sections surveyed in 2012 were used in the simulation. The model was calibrated using observed discharg...

Mandali Dam is one of the small dams in Iraq; it is located on Haran Wadi, Gangir, just 3km north-east Mandali City. Mandali dam consists of four main parts, the dam body, the intake structure, the spillway, and the bottom outlet. The dam body is zoned earth filled with a central core. The main purposes of the dam are to maintain flow of Wadi Haran...

The basic idea of the Main Outfall Drain, MOD, was to construct a main channel to collect saline drained water of the irrigation projects within central and southern parts of Iraq and discharge it down to the Arabian Gulf. The MOD has a navigation lock structures near Addalmage Lake at station 299.4km. This structure is designed to ensure navigatio...