Questions related to Software Analysis
An permanent magnet machine needs a thermal guarantee from its software analysis, since overheating may destroy its magnetic field. There are videos showing the temperature animations but nowhere could I find a detailed process to compute it from the Maxwell 2-D file.
Recently an external collaborator performed for me a GC/MS on my samples, using Glucose and Glutammine with all C labelled.
The related data consist in peak area of each metabolite/isotopomer. I tried to analyze these data by INCA (a toolbox of MATLAB), but I need to find a metabolite network model that describes the pathway that I want to investigate (e.g. TCA Cycl and Glycolysis)
Do anyone know were I can find network models?
I would like to recive any suggestions about better MFA software analysis as well as INCA.
Thanks in advance
I did experimental analysis of scale model ship to get RAO.(S.K chakrabarti text on hydrodynamics says,scaling up can be done.)
The question is if create model in software & prototype in software and run analysis,will the result be similar for both software simulation, will we get same RAO?
I'm looking for a software which automatically analyses emotions in speech in natural settings. So far I've been looking into Praat and EmoVoice and would be interested if anyone has experience with them or can suggest other tools? many thanks
PQmethod is a software to analysis the data that derived from Q-method. I am looking for any useful videos or books or documents that shows the details of data analysis.
Thank you for your anticipated cooperation.
during modeling steel hot-rolled cross sections residual stresses need to be entered in the analysis. we are using ANSYS software in the analysis. How the residual stresses can be defined in ANSYS?
I was collected my ten scale level data from from infected and control(non inoculated) by plant pathogen. Therefore, which statistical tools is appropriate for my data analysis?
i have an issue regarding haunch beam frame structure while designing it on Etabs software it is showing "error in dimensioning concrete design arrays".
please let me know whether Etabs can design the haunch beam section or not.
Urgent>> I am a master student doing a study about privacy behavior on Facebook.. my research model consists of two independent variables (cost and benefit), each independent variables consists of six items.. in addition to two dependent variables each of three items.. all measurement models are reflective.. the number of samples is 120.. all answers are within the range (1 to 5) or (strongly disagree to strongly agree).. I use the pls algorithm in smartpls software to analyse my model.. the problem is most of the outer loadings are below (o.7).. one variable has Cronbach's alpha below (0.7) while three varibles have AVE below (0.5). I try to delete the items with the least loadings but there is no recognized effect on the Cronbach's alpha and the AVE.. kindly I need to know how to fix this problem ??
I'm using the NIST DTSA-II software for analysing my XRF spectra and I have a problem with the spectrum calibration.
In particular, when I import the csv file, the software correctly displays a spectrum but it puts keV on the x-axis although my data are channels.
And for this reason I need to calibrate it and I would do it by using some specific liines that I know for sure that are presents, but when I try to use this option in the "calibration" path, after clicking the finish button, nothing happens.
So, I would ask if someone of you can give me hints to overcome the problem or can suggest me other XRF (free) software for data analysis.
Thanks in advance!
I'm currently writing a software to analyse microscopy images. To give the user a better experience, i want to automatically extract as much information about the image as possible such as the x/y-resolution and so on.
I don't have a problem to extract the meta data from the images, but came across a (in my mind) weird choice about the storage of additional image data. At least for the images i used, the software tag (tag 305) is used to store the magnification and the names of the channels in BGR order. The copyright tag (33432) seems to store additional information, in my case about the used cell line and what was detected (maybe used general user input).
My question is: Is this odd usage of tags common practice so that one can use the information given in such tags?
Iam working on flow injection system which is home made, therefore I need for a free software for analyse the chart?
I have sequenced few MTB genome I have the fastq files and BAM files I can visualize the data using IGB but not able to get the get the generated consensus sequence. I know there different command based linux based programs. But i dont have Linux OS and I also dont know programming. Hence if anyone can suggest any GUI based free software for the analysis.
However, apart from MTB I have some virus sequencing data too.
Let say if I would like to study the (regression) relationship between Corporate Governance and Cost of Debt.
WHAT quantitative software should I employ to test it and WHY should I use the suggested software as I heard about SPSS, Smart-PLS and EView?
Thanks for advice in advance.
Dear R. K. Jaiswal
Hope you are doing well I am Dr Babikir, Agrometoeorlogist
Based on your published paper entitled "Statistical Analysis for Change Detection and Trend Assessment in Climatological Parameters", I am working on rainfall trend and variability analysis using excel sheet but I fount some problems with homogeneity analysis because I don't have software for analysis.
would you plz check my analysis in attached excel sheet and if there is any problem.
I hope to hear postive and quick responses
b, Frequency band width ( based on Niquest Frequency)e specs which are deemed to be necessary for rodent EEG recording with associated bio analyzers (temperature, pressure, Heart rate etc).
What are the pros and cons of the telemetry units.
Which one will be ideal for rodent sleep study ( tethered system or telemetry based) ?
The Specs will include
a, S/N ratio
b, Frequency band width ( based on Niquest Frequency)
c, Number of channels
d, automated software for analysis
e, vedio EEG recording, camera specs
f, no of rodent units per recording system
I request the elite scientist in this field to post your input.
I am searching about a software for analyzing of electronic and communication boards viewpoint of radiation tolerance. for example the output of this software is 40 krad. it means this boards can tolerate 40 krad in radiation environments.
I am attaching one TEM image...... can anyone suggest me that the rod like structure is particle (cluster of particles: because no. of white spheres are present in single rod) or small white spherical structures are particles in this image. I am using Image J software for analysis, please suggest me which one should I consider as particle rod or small white sphere.
Kindly suggest a good statistical software to analyse data collected from an augmented field designed experiment ?
I am studying Ethiopian amphibians now and I need the software to analyse the phylogenetic relation ship of amphibians.
I have done my experimental work on pervious concrete. Please suggest me if there is any analytical software for analyse pervious concrete.
what are the suitable software to analyze of raw DNA sequences for microbial diversity analysis ?
I need to analyse one TEM image but The FTT option is not getting activated. Can anyone tell me why that function is not working and how to activate it.
Thanks in advance.
I have Daily Rainfall Data for 30 years for few stations near to Belagavi, I wanted to know is there any Open Source Software for Statistical Data Analysis. I wanted to use this software for Analysis of Rainfall Data of as I feel difficult using MS Excel. Please suggest me if any
I have to analyse the rock slope stability of rock hill.
The rock mass surface having lot of discontinuities.
I need the suggestion for select the software for analysis
PRAAT is a software program that enables the researcher to measure utterance fluency as well as phonetic transcripts.
All the videoes I have watched in the YouTube explaing phonetic analysis while my concern is long stretches of speech (dialogues).
I am researching fluency measures (mainly speech rate, articulation rate, time ratio, filled and unfilled pauses, pace and space).
I am looking for an institution or a reseacher whose experienced enough to teach me how to understand these measures.
I am looking for some software to analyse fish behaviour and activity (for instance swimming velocity and fast startle response) from video recorded files.
Hello, everyone. Could l ask any of you have used free and easily handled software to anylaze the data from thermogravimetric(Producing DSC and TA curves)? l used Peakfit-30days trial but it has expired now and it's a bit expensive if buy a official version.
I performed docking for my antibody-antigen complex using Z-dock. Is there any software that I can use to analyse the result of my docking by telling me the exact interacting residue and calculate the binding enery?
Any suggestion would be appreciated!
I have the data of total dissolved soilds of apple as references (y-variable).
I also have near-infared spectra data as predictors (x-variables).
I have the StatSoft Statistica software for the analysis.
While simulating the rolling operation in Ansys, rolls are not biting the work-piece even though friction between the surface of the rolls and work-piece is applied (Coefficient of friction as 0.4) and only 5% reduction is applied which is well below the max reduction allowed as per theory.
Can anyone suggest for the possible reasons of non-biting apart from what i have mentioned above, with respect to the software's analysis setting etc.?
i currently do immunophenotyping experiment using novocyte express machine. Im looking for free software for analysing the data including setting the gate, compensation etc etc. The software gave 30 days free trial software for editing and its already expired.
Im looking for other options for editing the ".ncf extensions". please suggest any available software that i can use.
I have run in previous versions of the software but the analysis tabs appear to be quite different in the latest version.
I'm looking for a software to analysis NGS data.
I would like to get some recommendations on a software, other than mac vector (don't have macbook). Prefer an open source free one but it doesn't have to be, it just needs to be intuitive and easy to work with....
Which is the best method to analyze qualitative data and are there any free software to analyse qualitative data focused on public health?
whenever mat is subjected to seismic loading, I observed very little or no pressure increment on opposite side w.r.t. direction of seismic force (observations as per SAFE & Staad Foundation softwares analysis). But as per my thinking/logic the pressure must be high.
So please help me to clear my views in this point.
I'm trying to obtain a radial charge density or potential profile for an embedded H in a metal lattice. I have calculated my charge densities and obtained a CHGCAR using VASP and have plotted it using VESTA which is giving me some good qualitative information. However for further calculations I need an actual number. Could anyone recommend some software to analyse CHGCAR quantitatively? I'm hesitant to write a script myself due to the size of the data files involved. Any suggestions are welcome
I want to know about good statistical packages for analysis of plant breeding trials like multivariate analysis, generation mean analysis and stability analysis. I am using R, SPSS and PBTools but I am not getting the desired results due to certain limitations. Please let me know is there any free version available for GENSTAT or any other biometrics packages for smooth analysis.
I want to analyse the AFM image i got from AFM microscopy. I want to know the size and thickness of the flake of chemically exfoliated layered MOS2
Hello everyone, I am very new in this regard and learning everyday. I am working on disease resistance in Wheat and want to do QTL mapping. I already have found the chromosome which may have the major resistance(picture is in the attachment), now what could be my next step? I am interested to know about the basic steps but in details. I am using 2 DH population and I have 93 individuals in total and using RQTL software for analysis.
Thank you very much for your kind help.
In differential scanning calorimetry (DSC) analysis for degree of gelatinization determination, the sample is usually hydrated to ratio 2 to 1. That is 2 of water to 1 of solid. However, when you input the data into the software for analysis, most scientists include the total mass (solid and water). The peak integration of the thermogram is done to show specific enthalpy in J/g. Should the heat flow during gelatinization shown with a peak be considered as a function of the solid mass alone or it should include the mass of the solid and water?
I have used BAPS software to analyse my cpSSR data and found that the estimated admixture coefficient values for each individual was 1 and each individual (250 in my case) were assigned to each single cluster. What is wrong with my analysis. Is it the input file? I have used haplotypic data as the input file.
I am working on signalized intersections and using video data from CCTV footage and i need to extract data on volumes, flow, headway among others. I need a software that can analyze the video and extract that information.
what is the model to analyse the field trial using Augmented design with 210 cultivars and which test can I use for mean comparisons ? I want to use R software for the analysis.
I'm trying to import a .txt file that I exported from our LightCycler 480 software and import it in CopyCaller software to analyse the different amounts of Cq values and thereby differentiate between homozygous and hemizygous samples after a Taqman assay.
Unfortunately I cannot import the .txt file into CopyCaller and shows the error "<file> is not is not a compatible file and cannot be added to the analysis. Verify that the file format is compatible with the software.".
Does someone have any experience with this and knows how to solve it? Thanks in advance!
I need some help about visualization of gene set enrichment analysis. I saw this figure in a study and would like to make a similar one with my data. The difference between this work and mine is that in the paper there is more than one level of molecular analysis and I have only gene expression profile. However, I have the enrichment results of signaling pathways and the expression values of the differentially expressed genes. Can anyone tell me what software or analysis pipeline should I use to generate something like this?
I need a FEA software for nonlinear dynamic analysis of Masonry Structure. Some of software I know, but they are expensive. Please suggest some FEA software for analysis.
Can anyone help me? I have a question with five-point Likert item:
0 = Very little; 1= Little; 2= Moderately; 3= Many; 4= Too many.
Does anybody have any idea how transform this answers on a dichotomous scale (e.g: 0 = no; 1 = yes) ? I use SPSS software for analysis.
Regards! Luciano Vitorino
We have actually done a x-ray tomography upon a HMA sample and need to analyze those. After tomography we have got huge amount of data and I am unable to know which software will be the best for any analysis and graphing etc...Programming is a weak link though...
Hello everyone. I am using the Killer PLS SEM software for analysis. I realized when I use the standardized data for analysis, the software does not perform the IPMA and when I use the original data set it does nor perform the Bootstrapping analysis.Can some one help me?
Alternatively, subjective impressions/opinions? The objective is to determine Nash equilibria and various optima for each player. One relevant criterion is speed of execution (minutes, hours, days). A second criterion is ease of programming. Game theoretic problems are so multifarious, despite many common features, that no standardized software seem to have emerged. If that’s correct, each problem has to be programmed individually. Each of multiple players has multiple available strategies and seeks optimal (equilibrium) strategies to maximize his expected utility given that each other player performs the same activity for his strategies. In equilibrium no player has an incentive to deviate unilaterally from his optimal strategies. Such problems usually involve nested DO-loops and IF-tests. One DO-loop is needed for each strategy for each player. One starts with some chosen combination of strategies for each player and determines each player’s expected utility. Next one alters the value for one strategy for one player from some lower limit to some upper limit and determines which value gives the highest expected utility for that player. Thereafter one proceeds to the second strategy for the same player or to the first strategy for player number 2 and chooses the value that gives the highest expected utility for that player. The procedure runs until no further increase in expected utility for each player is possible, or, in some cases, an equilibrium cannot be found and the procedure runs forever. One possible conceptualization of the problem is that each player solves an optimization problem considering the other players as constraints. Thereafter one proceeds to player number 2 and solves that player’s optimization problem considering the other players as constraints. The procedure continues until all players have optimized, and is then repeated since each player’s optimization may lead the other players to prefer to optimize differently. Of course challenges exist, such as multiple equilibria. A common solution method in game theory is backward induction. If the game theoretic problem involves the time dimension, an additional DO-loop is needed. Sometimes bounded rationality can be assumed so that one seeks the optimum for the current or next or next few time periods. Another relevant criterion is illustration e.g. in graphics of the research output. I have used Mathematica since 1995, currently Mathematica 11, and am satisfied with the illustrative capabilities. Possibly, research output from GAMS may sometimes have to be transferred to other software packages such as e.g. Excel e.g. if certain requirements are needed for illustrating the output e.g. graphically, but I am uncertain about that. If GAMS (gams.com) compares favorably with Mathematica and/or Matlab e.g. for speed of execution and ease of programming, the illustrative quality may be assigned lower weight.
As there are so many performance measures, there are many ranking results. That is, if we try to rank a group of software defect prediction models from best to worst using ROC measure, we will definitely have different rankings if we evaluate these models performance using another performance measures, such as, recall, precision, accuracy, etc. This problem exists for within-project and cross-projects scenarios alike.
The question is how we can develop a performance evaluation method that would always yield the same ranking results for a given software defect prediction models?
Thank you, Hussam.
Can anyone please suggest the best imagery for vegetation types classification, and best remote sensing or GIS software for such analysis? Or, how can this classification be done in ArcGIS, if possible?
1.I have 200 sequences， How to analyze OTU?(97% similariy)
2 . who can send me DOTUR and MOTHUR?
3. which software woud be easizer to grasp? DNAMAN or Clustal x2 ? For DOTUR and MOTHUR are all based on DOS.
All the field experiments are carrying out by using some statistical designs viz., Randomized Block Design, Split plot design etc. After collecting the data, the results are use to obtain from running old softwares like agres and agdata at my University. If any body having the software which will analysis the data along with interpretation, please share with me, it will be useful for my research.
I would greatly appreciate any information about software that can be used to assess facial physical attractivenss in photos. Thank you!
Nvivo 11 is the software I am using for my literature review paper and for my literature review chapter in my thesis. Need to understand better this software
I am a software tester and now researching with Equivalence class. Here, some rules of invalid EC for generating test cases. Can anyone help me to review these rules?
*Rules for Invalid Equivalence Class for generating test case for input program of combinatorial testing*
1. If range is given then
Invalid EC=2(greater than upper value of range +less than lower value of range).
2. If range is given and last range value is infinity then,
3. If range is given and first range value is infinity then,
4. If range is given and first +last range value is infinity then,
5. For fixed range (value) like string, integer or any combination value
Invalid EC=Total number of valid class
I look for maturity models for Modularization of Software (or Software intense Systems) and maturity models for Interface management. Do you know if there exist any good ones?