Medical Engineering - Science topic

Hysteroscopy is an endoscopic diagnostic and therapeutic method traditionally performed under general anesthesia but increasingly under local anesthesia. Today, it is considered the gold standard in gynecology. This minimally invasive procedure allows for a detailed assessment of the uterine cavity’s interior and the removal of abnormal changes wit...

Introduction Stereotactic brain biopsies are essential for obtaining tissue samples from brain lesions, crucial for comprehensive histological analysis and subsequent adjuvant therapies. While most biopsies target supratentorial lesions, those involving the posterior fossa are less frequent but pose significant technical and surgical challenges, ne...

Purpose: This study investigates the effects of mentorship on the academic performance of students in the Department of Medical Engineering at Kenya Medical Training Centre, Nairobi Campus. Methodology: The study applied a descriptive cross-sectional survey that used quantitative methods of data collection. The primary data collection method was th...

Pain accompanying medical procedures can be considered in the “mind-body” problem of accounting for and describing the relationship between mental and physical processes (psyche and soma). Background/Objectives: The purpose of this study is to evaluate the severity of pain among patients undergoing a minihysteroscopy procedure under local anesthesi...

In den 1960er-Jahren übernahm zum ersten Mal eine Maschine dauerhaft die Funktion eines lebenswichtigen Körperorgans. Die künstliche Niere erhielt Menschen am Leben, welche die Medizin bis dahin nur beim Sterben hatte begleiten können. Wie gelang diese Ausweitung des medizinisch Möglichen in der Schweiz? Das Buch folgt der Entstehung einer neuen Wi...

This protocol outlines the main steps, materials, equipment, and safety methods for the preparation of Polydimethylsiloxane (PDMS) on silicon wafers (or similar). It is intended for all users, visitors, and service providers of the laboratories of the Institute of Biological and Medical Engineering (IIBM).

Introduction & Purpose Bones adapt its shape and strength in response to mechanical loading. Tissue-level mechanical stresses, i.e., hydrostatic compressive stress and octahedral shear stress, regulate biological events on the cellular and molecular level, and thereby impact tissue histomorphology and changes in bony geometry (Carter & Beaupré, 200...

Background Wound healing complications are a major challenge following the extended lateral approach in calcaneal fractures. Soft-tissue microcirculation plays an important role via the delivery of oxygen, nutrients, and the regulation of a local milieu. The aim of this clinical study was to examine the effect of intraoperative pneumatic tourniquet...

first_pagesettingsOrder Article Reprints Open AccessCommunication An Electrochemical Ti3C2Tx Aptasensor for Sensitive and Label-Free Detection of Marine Biological Toxins by Najeeb Ullah 1,†ORCID,Wei Chen 2,†,Beenish Noureen 2,Yulan Tian 2,Liping Du 2,Chunsheng Wu 2,*ORCID andJie Ma 1,3,* 1 Department of Biochemistry and Molecular Biology, School o...

In der Praxis werden wegen des hohen Aufwands meist nur solche Prozesse mittels BPMN automatisiert, die oft wiederverwendet werden können wie etwa ein Warenbestellprozess. Im Pflegebereich benötigt man jedoch für jeden Patienten einen individualisierten Prozess, der oft nur genau einmal für diesen Patienten durchlaufen wird und für den nächsten Dur...

Arteriovenous malformations (AVMs) are abnormal connections between arteries and veins that bypass the capillary system. Among AVMs, uterine ones are very rare, and it is not possible to have clear data on their incidence, as a good part of the patients remain clinically asymptomatic. Uterine AVMs consist of abnormal communications between branches...

Im Fokus dieser Branchenanalyse stehen die Einflüsse gegenwärtiger globaler Krisen und Transformationstrends auf die Medizintechnikbranche in Deutschland. Anfällige Lieferketten, Unsicherheiten durch Regularien, Globalisierungstendenzen und die Digitalisierung von Produkten und Prozessen stellen die durch ihren großen Mittelstand geprägte Branche u...

Statistics is one of the most important discipline used in Basic and Applied research including Agricultural Sciences, Biological, Medical, Engineering and Social Sciences etc. Most of the researchers are using the statistical techniques in a wrong way because of the lack of knowledge about these techniques. In this paper an effort has been made to...

Background/Objectives: To evaluate the clinical and patient-reported outcomes (PROMs) obtained with an optimized version of a previously investigated trifocal IOL. Methods: Prospective non-comparative single-center study enrolling 29 patients (55–71 years) undergoing bilateral cataract surgery with implantation of the trifocal diffractive IOL Liber...

Background Multiple-breath washout (MBW) is a sensitive method for assessing lung volumes and ventilation inhomogeneity in infants, but remains prone to artefacts (e.g., sighs). There is a lack of tools for systematic retrospective analysis of existing datasets, and unlike N2-MBW in older children, there are few specific quality control (QC) criter...

Background: Nowadays, Smartphone addiction is recognized as a significant public health concern. This universal issue has lead to a psychiatric condition termed "nomophobia" arising from excessive smartphone usage and dependency on it. Objective: The present study sought to evaluate the frequency of nomophobia among Pakistani university students o...

Telefon: 08 568 420 50, registrator@tlv.se, www.tlv.se Org. nr 202100-5364 THE DENTAL AND PHARMACEUTICAL BENEFITS AGENCY (TLV) Horisontspaning-upplys TLV om en ny medicinteknisk produkt TLV bedriver tillsammans med regionernas samverkansmodell för medicinteknik horisontspaning och önskar identifiera nya innovativa medicintekniska produkter. Syftet...

Background: Bio Medical Engineering (BME) professionals need to continuously review and improve their management strategies to keep up with enhancement in equipment technology, as well as with increasing expectations of health care organizations. In the last two decades, management strategies have evolved from the initial observation of electrical...

The dynamics between physicians and patients are being transformed by Artificial Intelligence (AI) in modern medicine. The foundation of AI applications in healthcare lies in its ability to process large data sets with exceptional speed and accuracy, surpassing human capabilities. For example, AI systems in radiology can analyze imaging exams in an...

Introduction Drug induced sleep endoscopy (DISE) can provide valuable information about the level (VOTE), pattern and degree of upper airway obstruction in patients with obstructive sleep apnea (OSA). Integrating DISE with cryotherapy can provide a novel and successful treatment for OSA patients. The objective of this study was to examine safety an...

De ahora en adelante, la unidad fenomenológica del hombre estará fragmentada en la representación científica contemporánea y en las realizaciones de la biomedicina. Para la tecnociencia, la especie humana parece teñirse de una corporeidad acorde a la humildad de su condición. El cuerpo no es un lugar de dominio para la clase médica o la ingeniería,...

Összefoglalás A lágylézer kezeléseket a páciens bőr-pigmentációjának megfelelő hullámformájú (folytonos- vagy impulzusüzemű) és teljesítményű (0,1-7W) lézerfénnyel végezzük. A bőr-pigmentáció alapján a pácienseket 1-6. csoportba osztjuk. Az 1. csoport a fehér bőrt, a 6. csoport az erősen pigmentált, sötét színű bőrt jelöli. A kezelés mélysége arány...

The fabrication and testing of a low-cost air-filled ion chamber for X-ray dosimetry is studied. The chamber is made of a metal cylinder, a central wire, a BC517 Darlington transistor, a 9V DC battery, and a voltmeter in order to have a cost-effective means to measure the dose. The output current of the dosimeter is amplified by the transistor and...

BACKGROUND Stress in life can deteriorate the physical and mental health of a person. Stress is higher among medical college students. The present study was undertaken to estimate the prevalence and causes of stress in different professions, in different countries, and different sexes to compare with the control and suggest possible solutions for t...

Simple Summary This retrospective case series provides real-life data of patients with a non-recurrent laryngeal nerve who underwent surgery at a high-volume thyroid surgery center using continuous intraoperative nerve monitoring to prevent vocal cord palsy. The results emphasize the feasibility and usefulness of continuous intraoperative nerve mon...

Background Globally, diabetes mellitus (DM) and peripheral artery disease (PAD) have an increasing incidence and a high prevalence and are both associated with high morbidity and complication rates, e.g., as chronic non-healing peripheral ulcers. Impaired macro- and microcirculation and peripheral neuropathy lead to an increased risk of foot ulcers...

Background: Effective implant placement depends critically on the implant's level of osseointegration with the alveolar bone. To increase osseointegration during implant placement, research has concentrated on the surface modification of implants, and morphological analyses have looked at the thread pattern in close interaction with the bone's surf...

The SIGNAL deliver by the laser is much important to society for various applications that is in medical and engineering fields. In this paper we survey the various application of laser, and then we conclude that laser is very important for analyse the digital system. The laser signal is very harmful for vision of human eye .so we cannot detect las...

Background Position of the nipple-areolar complex (NAC) is an important factor in the aesthetic impression of the breast, and NAC malposition is often an issue in breast reconstruction after nipple-sparing mastectomy (NSM). The purpose of this study was to evaluate the degree of NAC malposition depending on several factors using data quantified wit...

Stereotaxierahmen sind Instrumente für neurochirurgische Eingriffe und sollen zukünftig aus Kunststoffen aufgebaut werden. Um derartige Systeme, die jährlich in kleinen Stückzahlen benötigt werden, wirtschaftlich herstellen zu können, wurde untersucht, wie sich Bauteile mittels Multimaterial-Hochleistungsthermoplasten aus gefüllten und ungefüllten...

While studies on intelligent medical engineering have been the focus of broad research interest, there remains a gap in the literature pertaining to trends in the field as a whole. To gain insight into the research trends and focus area in this field, a bibliometric analysis was herein conducted analyzing intelligent medical engineering-related stu...

Pain is the primary cause of failure in hysteroscopy. It can be attributed to multiple causes, such as manipulation of the cervical canal, uterine distension due to the liquid distension media used during the procedure, operative procedures on the endometrium, up to the release of prostaglandins following manipulation of the cervix and uterine dist...

A mathematical analysis for a steady, incompressible, laminar Carreau nanofluid flow over a porous cone and wedge is considered. The novelty of this research work is to scrutinize an exponential space-dependent Cattaneo–Christov heat flux and quadratic Rosseland approximation effects. Two-phase nanofluid model, i.e., Brownian motion, and thermophor...

Das Implantieren künstlicher Hüftgelenke zur Behandlung schmerzhafter Arthrosen gilt als Erfolgs­geschichte der Medizin des 20. Jahrhunderts. Zwischen 1960 und 1990 haben Orthopäden und Chirurgen den Gelenkersatz von einem experimentellen Eingriff zu einer Routineoperation gemacht. Zu den Protagonisten dieses Geschehens gehört der Schweizer Arzt Ma...

Welche Optionen bietet der Einsatz von Kunststoffen auf dem Weg zu einer nachhaltigen Medizintechnik, Mikroelektronik und Sensorik? Ausgehend von den derzeitigen Entwicklungen zeigt sich, wie durch Auswahl erneuerbarer Rohstoffe, durch zirkuläres Design und fortgeschrittene Recyclingoptionen Kunststoffe zum Schutz von Ressourcen und Klima beitragen...

PURPOSE To validate an improved wet lab model for systematic and objective efficiency testing of instruments for phacoemulsification. SETTING Institute of Medical Engineering, Lucerne University of Applied Sciences and Arts, Lucerne, Switzerland. DESIGN Experimental study. METHODS Porcine lenses were incubated for different time spans in formali...

Unattached surface probes are commonly used with the O2C analysis system (LEA Medizintechnik, Germany) to monitor microvascular free flap perfusion. This study compared attached and unattached surface probes for extraoral free flaps. The study included 34 patients who underwent extraoral microvascular head and neck reconstruction between 2020 and 2...

Aim: The aim of this study is to examine the advantages and disadvantages of the design of the circular stapler device by sharing our hemorrhoidectomy results with circular stapler, and to examine whether changes in the design of the circular stapler device have an effect on these complications. Materials and methods: This study which was planned a...

Purpose: This research aims to evaluate the mediating role of SDG Goal Four target seven Quality Education for Sustainable Development (QESD) and Quality Education for Global Citizenship (QEGC) in the Performance of Christian Higher Education Institution Management. Theoretical Framework: The research study developed a conceptual framework and ques...

Purpose NHS Blood and Transplant Tissue and Eye Services provide a serum eye drop (SED) service to patients suffering from severe dry eye syndrome. Currently SED are dispensed using an automatic closed filling system (TF) manufactured by Meise Medizintechnik (Germany). An improved version (ATS) has recently been introduced by Meise, based on patien...

Con el fin de instruir a una nueva generación de profesionales, este artículo destacará dos colaboraciones innovadoras entre enfermería y tecnología sanitaria, que dan lugar a investigaciones y avances punteros. Para hacer frente a problemas sanitarios complejos se requiere una respuesta altamente competente, que incluya equipos de expertos de vari...

Objectives Postoperative flap monitoring is essential in oral microvascular reconstruction for timely detection of vascular compromise. This study investigated the use of attached surface probes for the oxygen-2-see (O2C) analysis system (LEA Medizintechnik, Germany) for intraoral flap perfusion monitoring. Materials and methods The study included...

Objectives Continuous non-invasive monitoring of blood pressure is one of the main factors in ensuring the safety of the patient’s condition in anesthesiology, intensive care, surgery, and other areas of medicine. The purpose of this work was to analyze the current patent situation and identify directions and trends in the application of non-invasi...

Background: Intraoperative neuromonitoring is widely used in thyroid and parathyroid surgery to prevent unilateral and especially bilateral recurrent nerve paresis. Reference values for amplitude and latency for the recurrent laryngeal nerve and vagus nerve have been published. However, data quality measures that exclude errors of the underlying i...

Methodik Eine Expertengruppe aus den Fachbereichen Medizintechnik, Medizinphysik sowie Radioonkologie des Universitätsklinikums Münster wurde gegründet, um die unterschiedlichen KI-Verfahren mit den medizinischen Versorgungs-, Diagnostik-und Therapiemaßnahmen einer radioonkologischen Abteilung zu kombinieren und anschließend mit dem Klassifikations...

Background Raynaud’s phenomenon (RP) and digital ulcers (DU) are frequent manifestations of Systemic Sclerosis (SSc). There are very few available approved drugs with varying efficacy. Rheopheresis (RheoP) is an extracorporeal apheresis technique used to treat microcirculatory disorders by improving blood viscosity. The effect of RheoP in SSc is cu...

Funding Acknowledgements Type of funding sources: Public grant(s) – National budget only. Main funding source(s): This project is supported by the Wellcome Trust and EPSRC Centre for Medical Engineering. Background QRS duration derived from 12-lead ECGs provides an estimate of the ventricular depolarization time and is an important metric to asses...

Funding Acknowledgements Type of funding sources: Public Institution(s). Main funding source(s): This work was supported by the National Institute for Health Research Biomedical Research Centre at Guy’s and St. Thomas’ Trust and King’s College, the Centre of Excellence in Medical Engineering funded by the Wellcome Trust and Engineering and Physical...

Funding Acknowledgements Type of funding sources: Public Institution(s). Main funding source(s): This work was supported by the National Institute for Health Research Biomedical Research Centre at Guy’s and St. Thomas’ Trust and King’s College, the Centre of Excellence in Medical Engineering funded by the Wellcome Trust and Engineering and Physical...

Funding Acknowledgements Type of funding sources: Public Institution(s). Main funding source(s): Department of Cardiology, University Hospital Basel, University of Basel, Switzerland Institute for Medical Engineering and Medical Informatics, School of Life Sciences, University of Applied Sciences and Arts Northwestern Switzerland, Muttenz, Switzerl...

Funding Acknowledgements Type of funding sources: Public Institution(s). Main funding source(s): This work was supported by the National Institute for Health Research Biomedical Research Centre at Guy’s and St. Thomas’ Trust and King’s College, the Centre of Excellence in Medical Engineering funded by the Wellcome Trust and Engineering and Physical...

Funding Acknowledgements Type of funding sources: Private grant(s) and/or Sponsorship. Main funding source(s): Wellcome/EPSRC Centre for Medical Engineering Background Although primarily considered a respiratory virus, cardiovascular manifestations have been reported in patients with Covid-19 infection. Atrial fibrillation has been observed as the...

One of the most prevalent genetic diseases in the world is beta thalassemia. Hemoglobin synthesis is decreased by the blood condition beta thalassemia. Patients with thalassemia exhibit a range of bone problems, including as spinal deformities, osteopenia and osteoporosis, as well as growth failure. This study’s main goal was to evaluate gait and b...

CASO CLÍNICO Resumen Ante la disponibilidad de plataformas de lentes intraoculares (LIO) trifocales, que funcionan muy bien, algunos de los pacien-tes a quienes se les ha implantado un LIO monofocal (lo que aún ocurre en un alto porcentaje de los casos en nuestro medio) desean explorar la posibilidad de un procedimiento quirúrgico para mejorar la v...

Welche Optionen bietet der Einsatz von Kunststoffen auf dem Weg zu einer nachhaltigen Medizintechnik, Mikroelektronik und Sensorik? Ausgehend von den Nachhaltigkeitszielen für Materialien und Prozesse erläutert dieses Referat, wie durch Auswahl erneuerbarer Rohstoffe, durch zirkuläres Design und fortgeschrittene Recyclingoptionen Kunststoffe zum Sc...

Biohybrid tissue‐engineered implants offer promising possibilities to treat cardiovascular diseases. The ability of tissue‐engineered implants to grow and remodel can be utilized to produce implants that can adapt to changes in the physiological conditions within the patient body. To improve the mechanical properties of the implant, a fibre‐reinfor...

Stroke is the third leading cause of death in Bangladesh with a 1-2% prevalence nationwide. The management and treatment options of acute ischemic stroke patients greatly depend on the arrival time of the patient in the hospital or emergency care. In acute ischemic stroke, intravenous thrombolytic therapy with recombinant tissue plasminogen activat...

The additive manufacturing technology has been applied in various sectors: the manufacturing of industrial components, toys, medicine, medical-surgical instruments, and tissue engineering sectors. In the tissue engineering field, it has been intensively applied to make biomaterials, organs, and drugs. The fundamental procedures of the additive manu...

The additive manufacturing technology has been applied in various sectors: the manufacturing of industrial components, toys, medicine, medical-surgical instruments, and tissue engineering sectors. In the tissue engineering field, it has been intensively applied to make biomaterials, organs, and drugs. The fundamental procedures of the additive manu...

Diese Arbeit untersucht die theoretische Auswirkung von implantierbaren Antennen auf menschliches Gewebe. Einsatzgebiete solcher Antennen sind im medizinischen Kontext vielfach vorhanden und umfassen aktuelle Forschungen, sowie bereits eingesetzte Anwendungen in den Bereichen der „Patientenüberwachungssysteme, insbesondere älterer Menschen, Vita...

Zusammenfassung In diesem Beitrag werden zum Thema „Zukunftsperspektiven in der Chirurgie aus deutscher Sicht“ zwei Aspekte diskutiert: zum einen gesundheitspolitische Themen wie die anstehenden Veränderungen des Gesundheitssystems, wie geforderte Mindestmengen mit konsekutiver Zentralisierung sowie die zunehmende Vielfalt unserer Bevölkerung mit C...

This paper examines trends of using e-books as a learning tool among EFL students of Al-Balqa Applied University (BAU) by applying the Technology Acceptance Model (TAM) and the number of English language courses as an external independent variable. Data is collected by administering a questionnaire to 283 respondents from Humanities and Social Scie...

Groningen heeft er met hoogleraar en KNO-arts Myrthe Hol een specialist bij op het gebied van in het botverankerde hoortoestellen, zowel voor volwassenen als voor kinderen die geboren zijn zonder oren (microtie). In haar oratie zal Myrthe Hol ons meenemen in de nieuwste ontwikkelingen op dit gebied. Ook zal ze ingaan op de stappen die nodig zijn om...

There is a paradigm change in 21st century in all the arenas such as Economy, Finance, Medical, Engineering, Law, Agriculture, Education, etc. due to the Information Communication Technology (ICT) era. Application of Internet banking was introduced in 1996 in India by ICICI bank. It was emphases the online banking services in branches where custome...

This paper is an original review of the book "Medicine-Based Informatics and Engineering" published in Springer's Lecture Notes in Bioengineering collection, in 2022, whose editors are Franco Simini and Pedro Bertemes-Filho. The review aims to synthesize the content of the papers presented in the chapters focusing on the solutions developed. The ed...

Introduction: NHS Blood and Transplant Tissue and Eye Services (TES) offer a serum eyedrop (SE) service to patients suffering from severe ocular surface disease. SE are prepared from serum collected at blood donation sessions; the serum is diluted 1:1 with physiological saline. Formerly, 3ml aliquots of diluted serum were aliquoted into glass bott...

Background: The stress has touched all the professions and dental students are also among them. All the professionals like IT, Medical, Engineer have their own stress levels due to work pressure and other factors, there is always a need to possess their prevalence of anxiety, depression and alcohol abuse and also to understand their association wit...

Background The existing dementia risk models are limited to known risk factors and traditional statistical methods. We aimed to employ machine learning (ML) to develop a novel dementia prediction model by leveraging a rich-phenotypic variable space of 366 features covering multiple domains of health-related data. Methods In this longitudinal popul...

Increasing the thickness of the cornea offers new treatment options to the patients who may be otherwise unsuitable due to thin corneas. Changing the biomechanical state of corneal stroma could stabilize the cornea and decrease the natural progression of the disease process, postponing or avoiding the need for corneal transplantation.The XENIA lent...

Research scholars are generally affected by stress, especially in professional courses like Journalism and Mass Communication, Medical; Engineering. They affected by higher stress, which leads to psychological problems like Schizophrenia, Paranoia, cardiac problems, depression, nervousness, etc. Mental health among the research scholars indicates g...

Introduction Hemodynamic assessment is crucial after heart transplantation (HTX) or left ventricular assist device (LVAD) implantation. Gold-standard is invasive assessment via thermodilution (TD). Noninvasive pulse contour analysis (NPCA) is a new technology that is supposed to determine hemodynamics completely noninvasive. We aimed to validate th...

The SJUST, Scientific Journal of University of Science and Technology has three major issues: Medical, Engineering and Administrative Sciences. The current one is the Medical Sciences Issue No. 1 of Vol 1 of the Six Issue from the University Scientific Journal Issue No, 6

Research scholars are generally affected by stress, especially in professional courses like Journalism and Mass Communication, Medical; Engineering. They affected by higher stress, which leads to psychological problems like Schizophrenia, Paranoia, cardiac problems, depression, nervousness, etc. Mental health among the research scholars indicates g...

Ziel des Forschungsvorhabens war es, maschinelles Lernen (ML) für Intelligente Technische Systeme (ITS) entlang der gesamten Wertsch¨opfungskette nachhaltig verfügbar zu machen und ML als Service insbesondere für kleine und mittlere nternehmen (KMU) zu etablieren. Dieses erforderte Entwicklung und Transfer neuester ML-Innovationen auf die in ITS ze...

Die zweite Auflage des Wettbewerbs Mobility/Medical goes Additive – The VDI Students Competition hat vom 1. bis 3. Juli 2022 stattgefunden, dieses Mal erweitert um den Bereich Medizintechnik. Das Gewinnerteam A3dicted der TU Berlin präsentierte ein innovatives Leichtbau-Exoskelett, das die Probleme aktueller Modelle, wie zu hohes Gewicht, schlechte...

The Indian education system had not seen any major reform for a long time. The students had only a few career options like medical Engineering or law. Their thought had limited to the restricted area and was chained to the limited boundaries. it became important to free them from tailor-made ideas and thought and inculcate creative and innovative t...

The Indian education system had not seen any major reform since a long time. The students had only few career options like medical Engineering or law. Their though had limited to restricted area and was chained to the limited boundaries. It became important to free them from the tailor made ideas and thought and inculcates creative and innovative t...

This paper analyzes the Romanian biomedical engineering educational path and certification process in European and international contexts and emphasizes the existence of a deficient operationalization of this qualification and profession, arguing that the domestic shortcomings are both a consequence of an unquestioned process of adopting European a...

Digitale Innovationen bieten mittelständischen Betrieben des verarbeitenden Gewerbes die Chance, ihre Produktions-, Logistik-, Vertriebs- und Verwaltungsprozesse vollständig neu zu gestalten. Dadurch können sie besser mit neuen Umweltanforderungen umgehen und so die eigene Zukunftsfähigkeit sichern. Insbesondere wenn mehrere digitale Innovationen...

Objective To explore the practical effect and value of the career reform and development of clinical medical engineers in hospitals. Methods A hospital in Xi 'an reformed the career development of clinical medical engineers, allowing clinical medical engineers to deeply participate in the whole process management of medical equipment, and forming a...

Definitely we know that now the economic growth is in peril position & our GDP is going negative. Social development is an push up of the capacity of any economy to produce goods & services. Main exploratory Factor analysis is applied for data analysis by IBM SPSS 20 to ascertain the determinants of economic development & textile industry. The stud...

Definitely we know that now the economic growth is in peril position & our GDP is going negative. Social development is an push up of the capacity of any economy to produce goods & services. Main exploratory Factor analysis is applied for data analysis by IBM SPSS 20 to ascertain the determinants of economic development & textile industry. The stud...