Massage - Science topic

Women are not aroused with a lover. No one can name even one female erotic turn-on. If they are not aroused, they are not having orgasms. But also the lack the motivation to seek genital stimulation. It has nothing to do with culture. It is the same worldwide. Women's lack of interest in sex is due to biology. The clitoris is much less responsive than the penis but also women's minds respond to many fewer erotic triggers. Female arousal is largely subconscious so most women never discover orgasm by masturbating.

You can check in drop down box where it shows all atom and group. As to what I can see from image is that there is a floating molecule just above the ring and is not joined to it by any bond.

You can check what type of molecule is that and work around that for example, is it a part of structure or not

For your study design with 5 subjects and 3 consecutive massage sessions, the appropriate statistical test to use would be the Wilcoxon Signed-Rank Test. This non-parametric test is well-suited for analyzing paired data, such as the pre- and post-massage blood pressure measurements you will be collecting.

The Wilcoxon Signed-Rank Test is used to determine if there is a statistically significant difference between the paired observations (pre- and post-massage blood pressure readings) for each session. By analyzing each session separately, you can assess the impact of the massage therapy on blood pressure within each session.

To summarize the steps:

1. Conduct the Wilcoxon Signed-Rank Test for the pre- and post-massage blood pressure measurements for Session 1.

2. Conduct the Wilcoxon Signed-Rank Test for the pre- and post-massage blood pressure measurements for Session 2.

3. Conduct the Wilcoxon Signed-Rank Test for the pre- and post-massage blood pressure measurements for Session 3.

This will allow you to determine if the massage therapy had a significant effect on blood pressure within each individual session, which is in line with your study objective.

It's important to note that with a small sample size of 5 subjects, the statistical power of the Wilcoxon Signed-Rank Test may be limited. You may want to consider the effect size and the potential for Type II errors (failing to detect a significant effect when one exists) when interpreting your results.

Additionally, you may want to consider performing a repeated-measures analysis, such as a Friedman test, to evaluate the overall effect of the massage therapy across all three sessions. This would provide a more comprehensive understanding of the impact of the intervention on blood pressure.

In my personal opinion, if you are invited for a conference, which is, moreover, focuses on quite a diverse range of topics (medicine and education), it looks very fishy...

if there are only traces of other aromatic compounds UV-Spectrometry should be very sensitive,

what is the basis of the gel.

The best method always depends on the other compounds present.

Vigorously miracle

Here are some studies that have examined this:

1. Among football players- https://www.termedia.pl/Journal/-129/pdf-36678-10?filename=HM_20(4)_46_51.pdf

2. Among tennis players- https://www.atlantis-press.com/article/125943681.pdf

3. Among wrestlers- https://www.researchgate.net/profile/Seyed-Mohammad-Zadkhosh-2/publication/275344015_The_effect_of_massage_therapy_on_depression_anxiety_and_stress_in_adolescent_wrestlers/links/553927ce0cf226723ab9e332/The-effect-of-massage-therapy-on-depression-anxiety-and-stress-in-adolescent-wrestlers.pdf

4. Athletes from athlete clubs-

If its been that long you should assume they are not serious enough to deserve any more of your time. I'd suggest to switch to a different journal.

Hi Romyssa,

All three models must be in the same place. Then do the following steps.

1- Run Modflow.

2- Run MT3D

3- Run SEAWAT

Best,

Sami

To Hana Qudsieh:

Dear Mahinul Islam Afif

You can use the following tips regarding how to get things to converge:

Dear Jagajjit Sahu

The linkages you provied offered valuable information on type of predict function.

Thanks~

Best wishes!

Donghao Huang

Since it has become a norm and habit, I feel we should be confident in using the term doctor after acquiring PhD degree.

The "list of index (0) out of bound" error used to appear in the older version of MEGA. Try using the latest version "MEGA11"

Nils Wagner Thank you for your support. Problem is solved. First I done the static structural analysis and then done the model and harmonic analysis to the solution of static analysis. I have a problem, Is ansys didn't support directly for model and harmonic analysis of hyperelastic materials??

Why don't we conduct an experiment on neonatal rabbits for instance to prove/disprove that claim?

You are welcome.

It might be solved by avoiding copy pasting from excel sheet. Use access database import option.

How did you prepare your protein, ligand and DPF files? If you could attach your dpf file and the commands you are using (or a picture of them), it would be helpful.

It is often an unconscious tendency. I tend to guard against where possible. Researchers do have some fixed notions that become accepted wisdom then guide expectations, perpetuating bias.

Daniel Meierrieks

Do I need to check cross-sectional dependence when N is greater than t ( N=96 and t=18)?

Dear A. K Azad,

During meshing the COMSOL model you have to remember one think is that the minimum mesh size should be smaller than your smallest domains in your model.

Example, suppose in your model consists of 9 domains. Lets assume domain 1 is having small size among the domains i.e. 2cmx1cm, them your meshing size should be ( maximum mesh element is 0.5 and in minimum mesh element is 0.2).

Or

You can mesh all the domains separately according to their size.

thank you Mr.Moreland for your replay

Thank you!

Try the method metioned in this website. It does work for this problem.

https://www.researchgate.net/post/How_do_i_increase_the_idle_network_time_out_in_Abaqus2

What you need for dying people is the courage to talk about existential issues. What kind of other therapy you does not influence the patient's death anxiety or thoughts about eternity.

If the new paper with three groups has a “new message” then it’s acceptable. If the new paper has no significant new message then it’s a waste of time and effort. It’s a waste of readers precious time reading papers with no new message based on previously published literature With no significant new data.

You assigned some surface with a kinematic constraint and a contact constraint. So they may conflict each others.

A similar message appear when I have 2 surfaces having a common line. And I assigned each of them with a boundary condition, so the common line have two different assignment from both surfaces and the program provides warnings.

The warning may not effect the model results and is acceptable but you could use General contact option instead of specifying a particular surface with contact constrain to get rid of this message.

Thank you very much!

I'm still interested in additional opinions/theories. So, if there is anyone who is willing to contribute to this topic please don't hesitate to drop a comment. Thank you!

If you just submitted the paper, it likely means the editor is deciding whether the article is appropriate for this journal and the research is of high enough quality to send it out for review or to desk reject the paper.

blastp -query all.fas -db allseqs -out all-vs-all_dbsize_defult.tsv -outfmt “6"

use only this and remove other flags, your sequences in the blast database seems to miss the id in header.

I agree with Mohd Nazarudin Bin Rosli

Dear Ramin

sinous carotid massage is the first line in PSVT

Adenosin and verapamil is the second line

good luck

Hi, in addition to what the first contributor said, try Bicarbonate-Formalin Diluting Fluid for Sperm Count, Ricca Chemical.

Indurative mastitis is associated with fibrosis of udder parenchyma. Edema is most likely emanating from obstruction of blood flow by fibrous tissue, in which antibiotics are no longer the solution . I would suggest surgical intervention. Even with that, this cow is unlikely to have adequate alveolar parenchymal regeneration for the next lactation.

I agree that it sounds like your female is egg-bound. Basically, the ovaries are producing eggs but the female has stopped releasing them, perhaps because the ovarian ducts are blocked and the oocytes are not reabsorbed efficiently, hence the increase in the size of her abdomen. It can be painful for the fish and in extreme cases can cause the skin to start splitting.

When something is off with our fish, the first thing I do is check all of the water quality parameters. Next, look at other parameters like food and light. You could be seeing this response if you have changed the type of food you are using, if the food is very expired, or the female is obese or has not been bred very much (especially if you house according to gender). Also, check the timer on your lights to make sure that it is working properly.

Most sources recommend gently stroking the abdomen from head to tail, massaging or squeezing the abdomen. This is very similar for procedures used for egg stripping for in vitro fertilization (https://youtu.be/ziNAXS1E0vE). You can do this with or without anesthesia (I usually choose without since it is fairly quick). If you choose to go without, make sure you use a soft net and keep her in it during the massage. You will know if this works in a relatively short amount of time after she has been returned to her tank and/or recovered from anesthesia.

Hello This is a mistake of translating. Deep breathing is a great way to breathe and exhale through the nose and counting.

Dear Hafiz,

Please check out the answers from this question:

Regards,

Hello Mohammed

the reasons for this may be many

but one of the reasons may be the direction of the axis of symmetry is to be in FLUENT only the x-axis

Dear Nicholas,

Do you have any literature in this issue?

Regards,

Mehdi

This interesting article from Nature might help you. 

Regards 

Dear Pro Mohamed

It is my honor to say on my own that not only the econometricians, the econmists also have to know the theory and also have to know the ways to check theories. But, in every economic theories and also econometrics theory they have assumptions that are the point.

And, day by day the researches in both areas try to study more by rejecting the assumption and check it.

Bests

Canh

Rosi,

I don't mind sharing at all.  The primary rationale for our dosage and frequency were to make the treatments clinically feasible within our primary field of athletic training were providers sometimes have limited time with individual patients.  However, we also wanted to build in multiple treatment sessions so that we could potentially train/improve the sensory system on top of treating the symptoms.  Much of the literature suggests that while a single session, of shorter duration, could be effective, multiple treatments result in a more meaningful response in select outcomes.  This was our first effort to determine if the larger responses were train to altering motor control programs within the patient by improving the degrees of freedom available to them.  Based on these results, we believe that is possible and are now working on the next steps to confirm these results.  I hope this helps

Erik

Thank you very much Dear Sh Haber. I thing it clarified our question.

Another source, written in the Cochrane style of meta-analyses, is:

IRR for 45 mins will be too long as it can cause burns. Usually it is given for 10 mins, to the max 15 mins and it is very good combination after massage espicially in palliative care

This error happens when number of FIS rules is greater than 250. You should use a smaller FIS (smaller Number of MFs) and use genfis2 instead of genfis1

GENFIS1 uses the grid partitioning and it generates rules by enumerating all possible combinations of membership functions of all inputs; this leads to an exponential explosion even when the number of inputs is moderately large.