Science topic

Inventory - Science topic

Explore the latest questions and answers in Inventory, and find Inventory experts.
Questions related to Inventory
  • asked a question related to Inventory
Question
1 answer
Dear Researchers, I am currently a graduate student in the Department of Psychology at Sogang University, South Korea.
For my thesis, I am conducting a validation study of the Emotion Regulation Inventory (ERI), originally developed by Roth et al.(2009). I am particularly interested in identifying any international validation studies of the ERI scale, which was developed based on Self-Determination Theory (SDT). I've searched extensively, but I haven't been able to find any. If you are aware of any such validation studies conducted outside of Korea, could you please share them with me?
Thank you very much.
Relevant answer
Answer
Roth et al. (2009): Introduced the ERI and its initial reliability and validity.
Brenning et al. (2015): evidence for the ERI’s predictive validity
Benita et al. (2020): structural validity and associations with well-being in a cross-cultural study.
• Brenning et al. (2022): Supported the ERI’s clinical relevance as a transdiagnostic risk factor in adolescents.
• Waterschoot et al. (2023): Further validated the ERI’s applicability using a person-centered approach during the COVID-19 pandemic.
  • asked a question related to Inventory
Question
2 answers
I hope this email finds you well. My name is Areeba Shafique and I am a bachelor's student at Fatima Jinnah Women University. I am conducting a research study on Impact of neuroticism and social media exposure on climate change anxiety among young adults ;role of environmental concern. . As part of my research, I am interested in using the Environmental attitude inventory (EAI-24) scale developed by John Duckitt
Could you please provide me with the contact information of the author of the EAI-24 Scale, specifically John Duckitt, so I can request permission to use their scale in my research? Alternatively, if you could forward my request to the author, I would greatly appreciate it or give me Email .
Thank you for your time and assistance.
Best regards,
Areeba Shafique
Relevant answer
Answer
  • asked a question related to Inventory
Question
1 answer
Can flood paths be identified in mountainous areas? What is the solution? And what solutions can be offered to prevent flooding in human settlements in cities and villages?
like incessant rain, increased hydrostatic pressure, and rapid ice melt, a large amount of lake water can be suddenly released. This leads to dam instability and eventual breach, triggering a GLOF (number . Similarly, LLOFs also involve breaching dams. However, LLOFs dams are formed by earthquakes or rainfall-induced landslides blocking streams and rivers. The landslide carries soil, debris, and other materials blocking streams and rivers to form landslide dams .which in turn create dammed lakes. Rising lake levels and erosion of the dam’s sidewall can destabilize its structural integrity. If the dam fails, it can suddenly release large volumes of water downstream, triggering an LLOF (number .Overall, climate conditions interact with cryospheric and geological environments, collectively driving the occurrence and development of GLOFs and LLOFs. Y. Bai et al. Science Bulletin Our analysis shows that humans and infrastructure in HMA have been exposed to increased risk from various floods in the past seven decades. PFs have the broadest impact, causing at least 23,900 deaths and displacing 105 million people from 1950 to 2023. The PFs triggered by monsoon rains are particularly concerning due to their widespread impact, prolonged duration, and tendency to cause severe casualties and displacements (Fig. S11 online). Additionally, our statistical analysis reveals a significant positive correlation between the number of fatalities and rainfall intensity . Unlike PFs, SFs often mobilize large ice blocks and meltwater, potentially transforming or cascading into debris flows and landslides. On average, each SF in HMA has caused 18 fatalities, affected approximately 128,000 people, damaged 3,378 ha of crops and killed 553 livestock . GLOFs on the other hand have far-reaching impacts, also causing devastating damage to settlements and infrastructure downstream. For instance, over 6,000 fatalities were reported in June 2013 due to the Chorabari glacial lake outburst in the western Himalayas . Like GLOFs, when LLOFs occur, they release a huge volume of water, generating extremely high peak flows and catastrophic floods. Meanwhile, we observe a marked population growth and expansion of infrastructure (e.g., hydropower, buildings, and transportation) in HMA (Fig. S13 online), with an average annual growth rate of 1.53% and 7.11%, respectively. This growth trend is expected to continue under various socio-economic development scenarios .and the exposure to flood risks may further intensify in the future. Besides their direct impact on population and infrastructure, floods can trigger a series of environmental issues and landscape instabilities . Very extreme floods can transport large amounts of sediment and pollutants which could accumulate in downstream river channels and floodplains. These pose serious threats to human health and environmental safety and even delay postflood recovery efforts. For instance, in 1975, spring SFs in Xinjiang, China, washed a large amount of sediment into channels, resulting in 70,000 m3 of sediment accumulation and delaying channel discharge for several months (Fid16 in Table S2 online). Extreme floods can also alter river morphology, resulting in riverbed elevation changes, channel widening, or even river avulsion . For instance, such processes were observed when the Kosi River was flooding in 2008. . Additionally, floods may transport long buried soil organic carbon .and mercury, affecting the regional carbon cycle and drinking water quality. Our state-of-the-art flood inventory is comprehensively compiled from public databases, flood yearbooks, media reports, and literature, and highlights the changes of flood complexity over the past seven decades. We highlight the flood complexity and increasing flood exposure risks due to the growth of infrastructure and population in HMA. The complex trends in flooding frequency arise from the interplay between climate warming, shifted precipitation patterns, rapid melting of glaciers, snow cover, and permafrost, as well as more research and public attention (Supplementary Text S6 online). In a warming future accompanied by accelerating glacier melting, snowfall-rainfall shift, more frequent rainfall extremes, and growing human activities, flooding risk in HMA is expected to further increase without effective adaptive measures. We emphasize that identifying risk-sensitive areas and adjusting the spatial distribution of population and socio-economic activities are essential in the future. Additionally, international data sharing and encouraging indigenous people, especially the youth, to participate in local flood mitigation efforts are vital for creating further awareness and addressing climate challenges in HMA.
Relevant answer
Answer
Las áreas propensas a inundaciones en regiones montañosas se pueden reconocer utilizando mapas de riesgo y técnicas de mapeo. Para evitar inundaciones en comunidades, se utilizan métodos tanto estructurales como no estructurales.
Las soluciones estructurales comprenden estructuras como muros de contención, presas, embalses y la desviación de cursos de ríos. Las opciones no estructurales incluyen sistemas de alerta anticipada, planificación del uso de la tierra y reforestación.
La integración de estas tácticas, adaptadas a cada región particular, es fundamental para una prevención eficaz de inundaciones en zonas montañosas pobladas.
  • asked a question related to Inventory
Question
1 answer
I was using OpenLCA version 1.11.0. After running the calculation for my product system, the impact results for Global Warming Impact (GWP100) were shown as per my inventory, i.e., For each flow the global warming impact was calculated in the form of a graph (Impact Graph). However, when I tried to repeat the same whole process in a different and updated version (2.4.0), my results were changed and the inventory impact assessment was not shown. Keep in mind the database, inventory, and the amount of inventory were not changed. For example, in the previous version, the graph was shown for ethanol and Sulfuric acid global warming impact. However, in the latest version, those two parameters changed into "ethylene Production" and "heat and power co-generation". This made it difficult for me to understand the global warming impact of each parameter/ flow used in the process. It will be appreciated if anyone can provide the link for the primitive version of the OpenLCA (v1.11.0).
Relevant answer
Answer
I think you need to revert to previous version - they may differ in algorithm calculation to actual.
  • asked a question related to Inventory
Question
3 answers
I have used MHI-18 in assessing mental health status of a student population. But I have not found a clear way of categorizing the scores, i.e how to determine that one has poor, better or good mental health status.
Thank you in advance.
Relevant answer
Answer
To determine cut-off points for categorizing Mental Health Inventory (MHI-18) scores, you can use the following steps:
  1. Data Collection: Collect a representative sample of MHI-18 scores from the population you're studying.
  2. Determine the Distribution: Analyze the distribution of scores (mean, median, standard deviation) to understand the general trends in the data.
  3. Define Categories: Typically, you would define categories such as: Normal: Scores within a healthy range. Mild: Scores indicating mild mental health concerns. Moderate: Scores indicating moderate mental health concerns. Severe: Scores indicating significant mental health issues.
  4. Use Statistical Methods: Percentile-based approach: Define cut-off points based on percentiles (e.g., the 25th, 50th, and 75th percentiles) to divide the population into groups. Receiver Operating Characteristic (ROC) Curve: Use ROC analysis to identify the score that best discriminates between different levels of mental health (e.g., healthy vs. distressed). Expert Consensus: If available, consult expert opinion or clinical guidelines to determine cut-off points based on research or clinical standards.
  5. Validate the Cut-off Points: Once cut-off points are established, validate them by comparing with clinical diagnoses or using them in a different sample to ensure they accurately reflect mental health status.
By using these methods, you can establish valid and reliable cut-off points to categorize mental health status based on MHI-18 scores.
  • asked a question related to Inventory
Question
5 answers
This requires considering different valuation methods, such as first-in, first-out (FIFO), last-in, first-out (LIFO) or the weighted average method
Relevant answer
Answer
In practical terms, there are two parts to this question. The first may be simply numerical, and it depends on what you know about the current price, market trend, and technology developments. The second is how to best move the inventory to reduce the risk. That may depend in turn on other factors in the business, such as when is the best time to declare a depreciation or loss.
The reference offered by Augustine Anane is interesting but only deals with AUDITING existing inventory plans in companies. It does not offer any guidance for developing the evaluation process itself.
In terms of both future audits and process integrity whatever mechanisms and measurements used to arrive at the assessment must be clear and consistent with adequate records and supporting data.
The methods you mentioned are just standard accounting procedures for general inventory control based on initial values. They do not address issues of obsolescence or depreciation in most cases. Depreciation may be included but is often calculated separately and only combined or reconciled when the inventory is actually removed.
  • asked a question related to Inventory
Question
4 answers
Dear all,
I found this 30-item self-report inventory of McClelland Motives, but no reference for it. My web search was unsuccessful. Does anyone happen to know a reference to this McClelland Motives Questionnaire?
Pdf file with items and scoring attached.
Thank you!
Relevant answer
Answer
The link doesn't work. How did you managed to find an source?
  • asked a question related to Inventory
Question
6 answers
Hi everyone. I'm currently working on my master's thesis. Due to my research, I need the Inventory of Interpersonal Problems - IIP 32 document. Can anyone help me?
Relevant answer
Answer
Thanks so much Aylin, I'll follow up by email, best wishes, Aisling
  • asked a question related to Inventory
Question
3 answers
Case study based
Relevant answer
Answer
In mathematical inventory models, historical demand data must be analyzed to understand the pattern of variation in demand by finding the demand rate and standard deviation, then finding the coefficient of variation for demand. Using the coefficient of variation, the type of demand can be determined, whether it is deterministic or probabilistic.
If the coefficient of variation is less than 20%, this means that the demand is deterministic . If the coefficient of variation is greater than 20%, this means that the demand is probabilistic and must be addressed using probability theory, as the probability distribution of the demand data is found.
*The type of lead time must be known in the place of application, whether it is deterministic or probabilistic, because it affects the inventory model. Using historical data, the type of lead time is known to estimate its probability distribution.
*Determining the level of service required by the decision maker in the place of application, usually estimated between (95 - 99%), which represents the probability of meeting customer demand without running out of stock during the replenishment cycle.
*The type of review of inventory levels is determined (continuous review or periodic review)
Continuous review: In this system, inventory levels are monitored continuously, and a supply request is submitted when the inventory reaches the reorder point.
Periodic review: Inventory is reviewed at fixed intervals, and the order volume is adjusted to restore inventory to a target level.
*Calculating inventory costs in your model:
1-Holding cost :It is the cost of keeping one unit for each Inventory cycle and includes the cost of place, insurance cost, examination and inspection cost
2-Setup cost :It is the cost of preparing the order or preparing the machines for each order, as it is calculated for each order and begins with the issuance of the purchase or production order and ends with the arrival of the materials to the stored. It includes costs issuing documents, transporting, unloading materials and arranging them in stores, communications, employee salaries and other administrative costs
3-Shortage cost: It is the represents the cost of loss that the company or institution will incur will incur due to not having inventory when it is needed, as well as the bad impact on the company's reputation.
The main goal of inventory models is to minimize total cost while achieving the required level of service
to meet customer demands.
*Intelligent techniques such as artificial neural network or deep learning can be used to predict demand based on historical demand data and then build a mathematical model for inventory based on the prediction results.
*Artificial intelligence algorithms such as genetic algorithm or swarm algorithms and others can be used to solve the probabilistic inventory model and improve the classical solution of the inventory model.
  • asked a question related to Inventory
Question
3 answers
Please let me know what the minimum change will be considered as meaningful important change?
Relevant answer
Answer
The minimal clinically important difference (MCID) for the Beck Anxiety Inventory (BAI) is generally considered to be around 10 points. This threshold indicates a meaningful change in anxiety levels that is perceived as beneficial by patients. However, specific values may vary depending on the population and context, so it's important to consider the particular study or clinical setting.
  • asked a question related to Inventory
Question
6 answers
I have landslide inventory of about 300+ polygons for my study area. I want to create non-landslide polygons for the same study area. Is there any strict rules or guidelines to follow for creating non-landslide areas? Or is there any automated GIS tools for this? Any detailed answers to these questions are highly appreciated
Relevant answer
Answer
Yashodhar Pathak Thanks a lot for your insightful and informative answer.
  • asked a question related to Inventory
Question
2 answers
Landslide Research: State of the Art and Innovations
Deadline for manuscript submissions: 15 February 2025
The Special Issue is guest-edited by Davide Tiranti.
The purpose of this Special Issue is to collect and group together quality scientific papers on these research fields and derived practical/operational applications. The topics related to the Special Issue therefore concern the innovative methodologies to achieve landslides identification, classification, characterization and hazard/risk evaluation through geomorphological field surveys and studies, remote sensing applications, GIS data mapping, processing and representation, the analysis of predisposing and triggering factors, landslide early warning systems implementation and the impact of current and future climate change scenarios on the evolution of these phenomena.
Keywords
  • landslide geomorphology
  • landslide detection
  • landslide inventory
  • landslide susceptibility
  • landslide hazard estimation
  • landslide early warning system
  • landslides in a changing climate
  • landslide risk assessment
  • landslides in GIS environment
Relevant answer
Answer
Thank yuo. I’ll wait for receive your submission.
Kind regards
  • asked a question related to Inventory
Question
2 answers
give suggestions
Relevant answer
Answer
Inherent uncertainties in demand and supply make it problematic for supply chains to accomplish optimum inventory replenishment, resulting in loss of sales or keeping excessive inventories. To cope with erratic demands, organizations have to maintain excessive inventory levels. The hybrid control is about various combinations of the different flavors of control in the inventory layers of organization, and hybrid would be a material batching and delivery system in which determines the recipe should be made next based on changing demand and availability of material and idle equipment. and accordingly apply differential equations in a hybrid production inventory model.
  • asked a question related to Inventory
Question
5 answers
How to use energy flexibility in inventory modeling?
Relevant answer
Answer
So many benefits are their. But can anybody tell me how can we use it in terms of mathematical function
  • asked a question related to Inventory
Question
4 answers
You have been appointed as the supply chain manager for a medium-sized hospital facing challenges in its supply chain operations. The hospital aims to improve material management, optimize inventory, and enhance sourcing processes to ensure the availability of critical medical supplies while controlling costs. Analyze the current supply chain processes and propose targeted improvements in material management, inventory optimization, and sourcing procedures.
Relevant answer
Answer
Bünyami̇n Daldiran Your answer looks like ChatGPT or Gemini generated or a copy from a textbook on supply chain management.
I put your answer in 2 different AI detectors: www.zerogpt.com and www.QuillBot.com.
The 1st one outcome was: this text is 78% AI/GPT generated; the 2nd was: 100% of the text is likely AI generated.
Yet, you posted this text under your name without mentioning an AI help or the textbook reference. It is called plagiarism. Shame on you.
  • asked a question related to Inventory
Question
3 answers
I need the Tunisian version of the Children’s Depression Inventory (CDI) for my master dissertation can anyone help please?
Relevant answer
Answer
Trierer Inventar zum Chronischen Stress (TICS) [Trier Inventory for Chronic Stress (TICS)]
Article
  • January 2004
  • 1,808 Reads
  • 134 Citations
  • Peter Schulz📷
  • Wolff Schlotz📷
  • Peter Becker📷
Request full-text
Save
Follow
Recommend
Share
This appeared in my recommended, based on your interest box once I looked up das Trierer Inventar. I expect you might access the text in the same manner.
  • asked a question related to Inventory
Question
1 answer
I have 11,000 plots and I only want to select 36 plots for inventory using GIS.
Relevant answer
Answer
Dear Hassina,
Depending on your goal with the selected plots, you can do it randomly or keeping any representativity. Do you have any information about the characteristics of the plots? Is any spatial environmental information is available for supporting the decision on the selection?
Anyhow, a more detailed specification of your problem could provide better answers.
Best regards.
  • asked a question related to Inventory
Question
2 answers
Hi, I have an inventory designed for USA . I want to use it for immigrants in UK. Should I have to validate it for each of subgroups like for Indians, Chinese , Thai and etc of my selected population?
Relevant answer
Answer
Hello Sameera Ranasinghe, Christian Geiser's answer is very important. However, there is another issue, being time and cost. In developing countries etc, they may be happy with a more haphazard result, not as accurate but just to get the job done quickly & show interest & have some interim results. Otherwise, if you do as your question suggests, it will be a cumbersome process, more time & cost which some countries may not be able to contribute to in terms of funding it. You can read my article on motorcycles and helmet safety. It was pretty rough, but I just wanted to write something to assist. A much more elaborate validated survey on opinions while preferable, is time & effort. There are advantages for being comprehensive and advantages in not being so much so but getting it done more quickly with minimal cost/ effort. The point above though is very valid.
  • asked a question related to Inventory
Question
2 answers
Hello everyone, how do you keep inventory for the chemicals you use in the laboratory? There are some paid software and websites for this, such as 'quartzy'. But is there a website or software that is free and can be used online by more than one user to control stock? Thanks for your recommendations.
Relevant answer
Answer
Dear Ruth Bushnel tank you for answer.
  • asked a question related to Inventory
Question
3 answers
Dear Research Gate team,
I am writing to request permission to use the Maslach Burnout Inventory (MBI) in my final year dissertation which is "Relationship between Mental health burnout and job satisfaction among psychiatric ward staff in Sabaragamuwa District Hospitals in Sri Lanka". The MBI will be utilized to measure mental health burnout.
I understand that the MBI is a copyrighted instrument, and I am committed to adhering to all terms and conditions associated with its use. If there are any fees or licensing agreements required for the use of the MBI, please provide details.
Thank you for considering my request. I appreciate your attention to this matter and look forward to your response.
Sincerely,
Sachin Jayashan.
Relevant answer
Answer
Hello, I agree with the previous suggestions. If you plan to use the MBI, it's advisable to acquire it through the official platform. Also, ask about the requirements for publishing your results: https://www.mindgarden.com/maslach-burnout-inventory-mbi/765-mbi-license-to-administer.html#/delivery_delivery-pdf/license_type-external_license/translation-french_hss
Alternatively, if you seek another reliable and accessible tool to evaluate burnout, consider exploring the Burnout Assessment Tool (Schaufeli et al., 2020) or the Copenhagen Burnout Inventory (Kristensen et al., 2005).
Kind regards,
Caterina
  • asked a question related to Inventory
Question
2 answers
Hello! Anyone here who knows where I could get a copy of the Psychological Inventory of Criminal Thinking Styles (PICTS)?
Relevant answer
Hello, thank you so much, I'll be waiting
  • asked a question related to Inventory
Question
5 answers
Hi, I am preparing my research study on clinical learning environment among nursing students which I needs the clinical learning environment inventory from Mikko Saarikoski. However, her email address can't go through. Can anyone help me out? Thanks.
Relevant answer
Answer
Although this is late reply, it may help many aspirants.
To obtain permission to use the Clinical Learning Environment Inventory (CLEI), you will typically need to follow these steps:
1. Identify the CLEI: Determine which version of the CLEI you are interested in using. The CLEI is a validated tool that has been developed and published by researchers. There may be different versions or adaptations of the CLEI, so make sure you are aware of the specific version you want to use.
2. Contact the Authors or Copyright Holder: Reach out to the authors or copyright holder of the CLEI to request permission for its use. The contact information for the authors or copyright holder can usually be found in the original publication where the CLEI was introduced. If you are unsure about who to contact, you can try reaching out to the corresponding author listed on the publication.
3. Request Permission: Write a formal request to the authors or copyright holder, explaining the purpose of your study or project and how you plan to use the CLEI. Be specific about the details of your research, such as the population, setting, and intended outcomes. Clearly state that you are seeking permission to use the CLEI and include information about the duration of data collection, number of participants, and any planned modifications to the instrument (if applicable).
4. Provide Supporting Documents: Attach any supporting documents or materials that may be requested by the authors or copyright holder. This could include your research proposal, study protocol, or ethics approval documents, depending on the requirements set by the authors or copyright holder.
5. Wait for Response: After submitting your request, patiently wait for a response from the authors or copyright holder. The response time may vary, so it's important to plan ahead and allow sufficient time for the permission process.
6. Obtain Permission Agreement: If your request is approved, you will typically receive a permission agreement or license from the authors or copyright holder. This agreement will outline the terms and conditions for the use of the CLEI, including any restrictions, citation requirements, and potential fees (if applicable). Review the agreement carefully and comply with the specified terms.
It's crucial to note that the process and requirements for obtaining permission may vary depending on the specific version of the CLEI and the preferences of the authors or copyright holder.
  • asked a question related to Inventory
Question
1 answer
I am working on ArcGIS to explore North-East India region for landslide predictions. I need an inventory for reliable data for this.
Relevant answer
Answer
The 'data' isn't specific to ESRI ArcGIS ( although there are a few special formats for DBs etc.). Geological hazards such as landslides are usually under the purview of whatever the geological survey agency is, at the national, state/provincial, metro, county, and city level, etc. ). 'North-East India is a vast area with varied terrain, so being more specific would be helpful. Do a Google Scholar search using the the obvious keywords like 'Landslide', 'GIS', and '(whatever location)'.
"NDMA guidelines are being followed for Landslide Hazard Zonation (LHZ) maps at 1: 50,000 scale and progressively larger scales for specific areas. National Remote Sensing Center (NRSC),Department of Science and Technology (DST), Council of Scientific and Industrial Research (CSIR), Indian Institute of India (IITs), Universities have done tremendous work in this regard. The NRSC Atlas on selected corridors of Uttarakhand and Himachal Pradesh has been a very useful Atlas (Please see NRSC work on Landslides). DST has funded more than 30 projects spread over India by various academic institutions the reports of which can be requested from DST (NRDMA)." from https://ndma.gov.in/Natural-Hazards/Landslide
  • asked a question related to Inventory
Question
3 answers
The best agricultural economics researchers who have done articles on the inventory of agricultural products.
Relevant answer
Answer
Finding the best agricultural inventory researchers involves a systematic approach to identify professionals or teams with the right expertise and skills. Here are some steps to help you find and select the most suitable researchers for your agricultural inventory project:
  1. Identify Your Research Needs:Clearly define the scope and objectives of your agricultural inventory research project. Determine what specific skills, knowledge, and expertise are required. Are you looking for experts in crop inventory, livestock inventory, land use, or a combination of these?
  2. Search Online Databases:Start your search by using online databases and academic search engines. Platforms like Google Scholar, ResearchGate, and academic journals provide profiles and publications of researchers in various agricultural fields. You can search by keywords relevant to your project.
  3. Collaborate with Academic Institutions:Contact agricultural departments or research institutions at universities or colleges. These institutions often have faculty members, researchers, and graduate students specializing in agricultural inventory and related fields. They may be interested in collaborative research.
  • asked a question related to Inventory
Question
1 answer
"AI and ML technologies are streamlining and optimizing warehouse operations. Let's discuss their current and potential applications, from inventory optimization to automation. Share your experiences, studies, or questions on this topic."
Relevant answer
Answer
AI, ML, and the Evolution of Warehouse Management
The landscape of warehouse management is rapidly shifting with the integration of AI and ML, transforming the once manually-driven environment into a haven of efficiency and predictive capabilities. Beyond the obvious realm of automation and robotics, the real magic unfolds in areas like:
  1. Predictive Analytics: Using historical data to forecast demand, thereby optimizing inventory levels and reducing carrying costs.
  2. Intelligent Route Planning: With AI, warehouse robots can autonomously find the most efficient paths, reducing pick times and improving workforce productivity.
  3. Demand Sensing: Leveraging machine learning to interpret signals from diverse data sources, enabling warehouses to adapt inventory strategies in real-time.
  4. Enhanced Quality Control: Through computer vision, anomalies in products can be detected, ensuring only the best quality items make it through.
  5. Energy Optimization: Implementing AI algorithms to ensure equipment runs at optimal times, thereby reducing energy costs.
  6. Maintenance Predictions: Proactively identifying equipment that might fail soon, thus preventing costly downtimes and ensuring continuity.
  7. Customization and Personalization: AI can assist in customizing orders and packaging, providing a tailored experience for the end consumer.
The above are mere glimpses into the potential of AI and ML in warehouse management. How have you seen these technologies being implemented? Are there upcoming innovations we should keep an eye on? Do you foresee any challenges in integrating such advanced systems into traditional warehouse structures?
Please share your insights, case studies, potential pitfalls, or even intriguing questions. The confluence of minds here can pave the way for future innovations in the field.
  • asked a question related to Inventory
Question
1 answer
If the collection efficiency of MSW is less than 50 % for a rural municipality where most of the waste is dumped in field areas directly rather than landfilled.
Can anyone please suggest me suitable methodology for computing the emission from MSW in such areas ?
IPCC. Guidelines for National Greenhouse Gas Inventories, Prepared by the National Greenhouse Gas Inventories Programme; Eggleston, H.S., Buendia, L., Miwa, K., Ngara, T., Tanabe, K., Eds.; IGES: Kanagawa, Japan, 2006.
Relevant answer
Answer
Yes, the Guidelines for National Greenhouse Gas Inventories by IPCC, 2006 can be used to calculate the emission from Municipal Solid Waste. The IPCC guidelines provide a standardized approach to estimate greenhouse gas emissions from various sources, including Municipal Solid Waste. The guidelines provide a step-by-step methodology for calculating emissions from waste disposal sites, landfills, and incineration facilities. The methodology includes factors such as waste composition, waste generation rates, and waste management practices to estimate emissions of methane and other greenhouse gases. Therefore, the IPCC guidelines can be used as a valuable tool for calculating emissions from Municipal Solid Waste.
  • asked a question related to Inventory
Question
5 answers
Early production of products is also considered as "Excess finished goods inventory" in lean wastes. If early production is considered in both types of wastes such as 'overproduction' and 'Inventory', there will be the chance of recurrence of same waste in different categories. How to avoid this duplication?
Relevant answer
Answer
In lean thinking, "early production" of goods or products is considered as "overproduction" rather than "excess inventory" because it involves producing items before they are actually needed. Overproduction creates unnecessary inventory that ties up resources and incurs additional costs, such as storage, handling, and potential obsolescence. Lean principles emphasize producing just what is needed, in the right quantity, at the right time, to avoid wasteful practices and maintain a smooth flow of production. By minimizing overproduction, companies can reduce inventory levels, save costs, and enhance overall efficiency in their processes.
  • asked a question related to Inventory
Question
3 answers
We're trying to expand research in the area of substance use disorders in healthcare for Latinos. I'm looking for a good measure of cultural competence of clinicians who work with Latinos.
I've been told (by AI) that the Cross Cultural Clinical Practice inventory exists. I've been guided to the Cross Cultural Health Care Program (CCHCP) to get access to it. (website https://www.xculture.org/ ). They (Danielle Widjaya of the program) deny having developed it or knowing anything about it.
I'm wanting to find a good measure of cultural competence of clinicians who work with Latinos (in a substance use disorder setting).
Relevant answer
Answer
Racial and ethnic minorities in Western countries experience greater adverse health outcomes, such as higher rates of cardiovascular disease, cancer and diabetes and tend to receive a lower quality of care. It is recognised that patient-centred care (PCC) can help improve health outcomes and is a key dimension of high-quality care. PCC is a model of care involving patients and families in the planning, development and assessment of their care.
Regards,
Shafagat
  • asked a question related to Inventory
Question
1 answer
Hello,
I am trying to build an (r,Q) inventory control model , to be implemented in a local manufacturing firm. In my model, r is identified by studying the demand trends and fitting normal distributions, while Q is identified by genetic algorithm minimising an inventory cost function.
Firstly the list of parts for re-order are first ideintified, after which a genetic algorithm co-optimises the batch sizes across all parts on re-order, considering factory capacity and demand constraints.
In my simulations, I find that the Q values suggested by my algorithm are realistic and in-line with what is required, however, it turns out that the model identifies all the parts which are less likely to be ordered by the production team.
Would anyone be able to shed any light on how to control this ?
Relevant answer
Answer
Dear Akhilnandh,
an (r,Q) model is a reorder point model, where r is the reorder point. When the inventory position of an item reaches r, the Q units are ordered. Thus, I don't understand what you mean when you say "Firstly the list of parts for re-order are first ideintified". In a (r,Q) policy the part to be re-ordered is the one that reaches the reorder point.
  • asked a question related to Inventory
Question
1 answer
Hi, I’m currently doing a research on work arrangements and emotional exhaustion. I will be doing ANOVA to see which work arrangement (i.e. hybrid, onsite, telecommuting) has the least and most emotional exhaustion levels. But I also want to do a moderation analysis involving both variables, potentially moderated by emotion regulation.
I want to establish or know that the work arrangement is related to emotional exhaustion. But how? My three category nominal variable of work arrangements would not be appropriate for a point biserial correlation. Meanwhile, the emotional exhaustion data would be interval/continuous because I’m using the Maslach Burnout Inventory’s subscale for it.
Is there any way perhaps so I can still answer this research question? Thank you!
Relevant answer
Answer
Work organisation can be expressed as a moderating variable in terms of work style or as a moderating variable in terms of emotion regulation (e.g. positive emotions, negative emotions)
  • asked a question related to Inventory
Question
4 answers
Hello
Please recommend me a lab inventory software
Thanks
Relevant answer
Answer
Hello Arvind Behal There are several lab inventory software options available, and the choice depends on your specific requirements and preferences. Here are a few popular lab inventory software solutions:
Quartzy: Quartzy is a widely used lab management software that offers inventory management, order requests, and lab communication tools. It provides a user-friendly interface and integrates with other lab tools and databases.
LabCollector: LabCollector is a comprehensive lab management and electronic lab notebook (ELN) software. It offers features such as sample tracking, inventory management, equipment management, and data organization.
Biovia CISPro: Biovia CISPro is a flexible lab inventory software that focuses on chemical inventory management and compliance with safety regulations. It offers features like barcode scanning, inventory tracking, safety data sheets, and chemical risk assessment.
SciNote: SciNote is an ELN and lab inventory management software designed for scientific research laboratories. It offers features like sample tracking, inventory management, protocol management, and collaboration tools.
BioRAFT: BioRAFT is a lab safety and compliance software that includes inventory management features. It helps labs manage chemical inventory, track hazardous materials, and ensure regulatory compliance.
Freezerworks: Freezerworks is primarily designed for managing biological sample inventories and offers features like sample tracking, storage management, and data integration with other lab systems.
eLABInventory: eLABInventory is a web-based lab inventory management software that allows you to track samples, equipment, chemicals, and reagents. It provides customization options and integrates with other lab management tools.
Thank you.
  • asked a question related to Inventory
Question
10 answers
Do I need to request permission to use Beck Depression Inventory and Beck Anxiety Inventory or I can simply use them since they are available in the public domain. How I can decide that any given survey is in the public domain or not ?!
Relevant answer
Answer
If it has already been psychometrically tested in your country, you can use it, otherwise, you must send a message to the medical author and designer and get permission to psychometrically test it.
  • asked a question related to Inventory
Question
2 answers
There are many methods available to solve inventory models with fuzzy parameters. I want to know that is it possible to apply aggregation operators to solve inventory models. Please provide any literature if available.
  • asked a question related to Inventory
Question
2 answers
I am in search of using a non-parametric test (as my data qualifies for this), that encompasses what my hypothesis is.
Hypothesis: There is a significant relationship between LASSI sub-scale scores and the specific domains of the CPI
The LASSI, a learning/study style inventory assessment has 3 main domains (skill, will, self-regulation) and is categorical data. Under each of these domains, there are subscales (ex: Will- motivation, anxiety, attitude)
The CPI, an evaluation method for clinical performance has 3 main domains (professional practice, patient management, practice management), and is ordinal level data. Under each of these domains, they also have subscales as well.
I originally thought to do a Kruskal-Wallis ANOVA with IV as LASSI with 3 levels for the domains, and DV as CPI with 3 levels for its 3 domains. However, I am not too sure if this works for my type of data set.
Please let me know what you suggest as to what SPSS analysis method I should be using for my data. Thank you!!
Relevant answer
Answer
It sounds like you have two categorical independent variables (LASSI domains and CPI domains) and you want to test for a significant relationship between them. One option for analyzing this type of data would be to use chi-square test for independence, which tests for a relationship between two categorical variables. This test will give you a p-value and will indicate whether or not the relationship between the two variables is statistically significant. Another option could be using a chi-square test of homogeneity. This test will check if the distribution of the LASSI sub-scale scores is similar across the different levels of the CPI domains.
Before you start testing, you should also check the assumptions of chi-square test, such as the size of the sample, the data should be categorical and independent. It's also important to note that nonparametric tests like chi-square and Kruskal-Wallis ANOVA are used when you don't know the distribution of the data or when the data doesn't meet the assumptions of parametric tests.
  • asked a question related to Inventory
Question
6 answers
This article was published on Psychological Quarterly, n 7, 1997, 277-310 but it is not available in any database I've tried so far. I also have tried to contact the author but I was not able to reach him.
Thank you in advance for any support on this question.
Kind regards,
Olga
Relevant answer
Answer
Thank you so much Dr. Hassan but one of our co-authors found the questionnaire and we were able to used in our research.
kind regard,
Olga Coelho
  • asked a question related to Inventory
Question
5 answers
In Psychological Assessment and Testing, how the scale, test, battery, and inventory are similar and different from each other?
Relevant answer
Answer
Test is a test - Yes or No or a definite answer.
Scale captures the preferences which can be taken as definite answers if required.
Battery is a series of tests.
Inventory is a collection of items which can be in the form of "test" or "scale" .
Both Test and Scales are designed to capture the response of the subjects to certain psychological construct.
  • asked a question related to Inventory
Question
3 answers
Does anyone know a good way to assess conformity in a group discussion setting like when determining policies and such.
Up until now I understand that one has to put a participant in a group of confederates to assess if he will conform. However, does a validated inventory of questions to ask exist in order to simulate such a setting?
Relevant answer
Answer
There is no single validated inventory of questions that can be used to assess conformity in a group discussion setting. However, there are some methods and approaches that can be used to assess social conformity. For example, you could use an observational approach to measure how much an individual conforms to group norms and expectations. You could also use a self-report survey to ask participants to rate their own conformity to group norms. Additionally, you could measure the impact of social influence by assessing the frequency and intensity of behavior changes when the individual is in a group. Finally, you could use a combination of these approaches to assess social conformity in a group setting.
  • asked a question related to Inventory
Question
4 answers
What does "a" mean in the unit kg/(ha*a) published in WFLDB for emission inventory of agricultural activities? The whole context of the formula is attached in this post.
Here is the link to the document
Thank you for your reply.
Relevant answer
Answer
As indicated by Osman Zakaria Wohor “a” stands for annual. I see that the literature uses the following ways to describe the units, all mean the same:
kg/(ha*a)
kg/(ha*year)
kg ha−1 a−1
kg ha−1 yr−1
To confirm what is already stated, see page 28 here (see also enclosed file):
Where they mentioned in the formula:
Pgw = quantity of P leached to ground water [kg P/(ha.yr)]
So, “a” means yr.
Best regards.
PS. Google Pgw = Pgwl * Fgw and you find numerous studies using this formula.
  • asked a question related to Inventory
Question
2 answers
Which is the most recommended software for the management of chemical inventory in a lab?
Relevant answer
Answer
There are few software options available for the management of chemical inventory in a lab. Some popular options include:
  1. ChemSteward: This is a chemical inventory management software that is specifically designed for labs and research facilities. It allows users to track and manage chemical inventory, create safety data sheets, and generate reports.
  2. LabGuru: This is a cloud-based lab management software that includes features for chemical inventory management, such as the ability to track chemical inventory levels, expiration dates, and locations. It also allows users to create and share safety data sheets and to generate reports.
  3. LabCollector: This is a laboratory information management system (LIMS) that includes features for chemical inventory management, such as the ability to track chemical inventory levels, expiration dates, and locations. It also allows users to create and share safety data sheets and to generate reports.
  4. ChemWatch: This is a chemical safety management software that includes features for chemical inventory management, such as the ability to track chemical inventory levels, expiration dates, and locations. It also allows users to create and share safety data sheets and to generate reports.
Ultimately, the best software for chemical inventory management will depend on the specific needs and requirements of your lab. It may be helpful to research and compare different software options to determine which one is the most suitable for your needs.
  • asked a question related to Inventory
Question
1 answer
Hello,
I do not have a tree view of the processes in simapro's inventory section. This limits me to adding new processes under materials category only. Any idea how I can fix this?
Regards,
Relevant answer
Answer
Figured it out :)
  • asked a question related to Inventory
Question
2 answers
We receive samples from different vendors from mouse studies. For the sample taken in life, some vendors can't tell us what volume is in the tube since it would take too much time to note every single volume. We know how much blood they take, but after clotting and centrifugation, they can not predict how much serum is going to be produced. For Sample Management and inventory purposes, I would like to put that information so that each time someone uses the sample we can subtract the volume taken and evaluate how much is left when we plan an experiment. I thought about following the scientist who thaw the sample for the first time and note the volume while it's thawed, but I was wondering if someone had thought of a better and more time efficient solution? Thanks for the help!
Relevant answer
Answer
I don't think there is much else you can do. If you could find out the manufacturer and model of the tube they use, you could try to get them, weight them and estimate volume by weight difference, but depending on the volume and variability in weight of the tubes this could be quite imprecise.
  • asked a question related to Inventory
Question
3 answers
I have been reading about the SSI scale (Gadzella, 1991) and saw a revised version available (Gadzella, 2012). However, I am unable to find the scale containing 53 items. Does anyone know how to obtain the inventory?
Gadzella, B. M., Baloglu, M., Masten, W. G., & Wang, Q. (2012). Evaluation of the student life-stress inventory-revised. Journal of Instructional Psychology, 39(2).
Relevant answer
I think the following paper will help you out:
Stress and depression in undergraduate students during the COVID-19 pandemic: Nursing students compared to undergraduate students in non-nursing majors
LMB Thomas - Journal of Professional Nursing, 2022 - Elsevier
  • asked a question related to Inventory
Question
1 answer
Is there an open-source software or apps supporting Life Cycle Inventory of emissions from agricultural activities?
Relevant answer
Answer
  • asked a question related to Inventory
Question
2 answers
Triage Decision Making inventory (TDMI) questionnaire 27 questions have three dimensions of cognitive abilities, experience and intuition, and in the study we want to use the 7-question questionnaire "acknowledges using intuition in nursing scale (AUINS)".
1- Is it possible to use the above two questionnaires simultaneously in the study and perform correlation measurement, considering that one of the dimensions of the TDMI questionnaire is intuition?
2- If it is not possible to use simultaneously and the possibility of communication, is it possible to remove the intuition dimension of the TDMI questionnaire? And how can this be done with reason and logic?
Relevant answer
Answer
yes
  • asked a question related to Inventory
Question
3 answers
When the Total process formation calculations/product system calculations are done, some inventory results are found . But I do not understandRCTGFsfromenvironmentalan the meaning of these RCTGF for the environment perspective. And also the color differences, color code, and criteria?
Relevant answer
Answer
Dear Nafisa,
I think this may refer to better-known impact assessment methods in the phase of LCIA (Recipe, CML, Traci...) or normalization/weighting methods. By the way, I use Gabi, but that's how I feel. To my knowledge, OpenLCA uses 43 different LCIA methods. Best wishes, Viktoria
  • asked a question related to Inventory
Question
4 answers
I am looking for firm-level financial data to write some research papers. Do you have Firms data or have information about this kind of database, please? The data should include financial information, such as leverage, tangibility, firm size, no. of employees, inventory, etc.
We can work together if you have it and you are interested. Let me know if you have any suggestions or recommendations in this regard, please. Thank you very much for your kind understanding.
Relevant answer
Answer
Dear Steftcho P. Dokov, Thank you very much for the suggestions
  • asked a question related to Inventory
Question
2 answers
How many participants is enough to get credible results of subjective distress of women after breast density notification using IES-R and STAI (state and trait anxiety inventory)?
Relevant answer
Answer
Dear David, I really appreciate your contribution. Your advice is really helpful. Thank you.
  • asked a question related to Inventory
Question
1 answer
**Especially, those inventories whose Turkish reliability and validity studies have been done.
Relevant answer
you can use the Methodology for the Evaluation and Prevention of Psychosocial Risks CoPsoQ-istas21.
  • asked a question related to Inventory
Question
5 answers
Hello,
Does anyone has the Arabic version of the Traumatic Grief Inventory Self Report Plus (TGI-SR+)?
I need to find it urgently in Arabic language.
Your help is greatly appreciated.
Thanks in advance
Best regards,
Ceyda
Relevant answer
Answer
Hi again dear Nur Afifah binti Abas,
Sure, I'd love to tell you more and get to know more about your interest and work.
Shall we contact personally ? And it will be my pleasure to talk to you.
Kind regards,
Ceyda
  • asked a question related to Inventory
Question
7 answers
Some recent articles suggest that we need to rethink about JIT because COVID-19 has disrupted supply chains. In my opinion, ability of top management team may play a vital role in the management of JIT post COVID-19. What do you think? Hi! I am an early career researcher. In 2019, I graduated with a PhD in Accounting from Monash University (that too on my birthday!). In my PhD thesis, I argue that human capital (i.e., ability of the top management team) plays an important role in the efficient management of Just-In-Time Inventory. "Findings suggest that managerial ability contributes to efficiency in JIT inventory management with the extent of such efficiency being conditional on the level of discretion granted to managers and the effective monitoring of such discretion", (Ranjeeni, 2019). Please access the link below for more details: https://lnkd.in/gvZxfN3u My apologies for any errors or omissions as this is my first post aimed to generate a conversation on something that I did for my PhD and still think is applicable post COVID-19. Your kind comments, views and experiences will be helpful in contributing towards my learning and future research as an early career researcher. Thank you!!! 🙂🙂🙂 Reference: RANJEENI, KUMARI (2019): Do More Able Top Management Teams Unconditionally Lead to Better Internal Operations? A Case of ‘Just-in-Time’ Inventory Management. Monash University. Thesis. https://lnkd.in/gX-8D5vx #JIT #ManagerialAbility #PhDThesis
Relevant answer
Answer
JIT has demonstrated to be effective when it is well implemented. Before the pandemic, it was simple to stablish a weak JIT workflow with suppliers with barely no cooperation and minimum understanding of mutual workflows and value chains (especially with suppliers located in Asia). Creating long-term, mutually beneficial partnerships based on trust with all suppliers is at the heart of JIT and Toyota's basic principles; the pandemic has proven not everybody understood it. JIT is more than just a drastic cost reduction with carefully planned lead times for shipping raw materials.
JIT was, is and will still be relevant. In my opinion, JIT will adopt a new name in the upcoming years because business leadership will not trust an “old-fashioned methodology”. Most likely, it will be infused with a risk-based approach to implementation and supplier selection.
  • asked a question related to Inventory
Question
2 answers
if anyone knows I would be grateful. There are plenty of tests and inventories but unfortunately they relate to adults.
Relevant answer
Answer
Dear Beatrice Marianne,
thank you for sharing this information)
  • asked a question related to Inventory
Question
6 answers
Hello! I am putting together a dataset of benthic macroinvertebrate monitoring / count data from estuaries and coastlines along the North American Coast (Canada and US). I know of larger datasets like the NCCOS National Benthic Inventory and EMAP, but I was wondering if anyone knew of other regional datasets. It would be preferable if the data were collected using Young-modified Van Veen grab samplers along with information on water quality and sediment quality, but any dataset recommendations will be greatly appreciated!
Relevant answer
Answer
Marcus W. Beck Yes, I am still on the hunt for more data! Thank you for sharing the links to the Tampa Bay monitoring data, I did not know about them. I will take a look at them!
  • asked a question related to Inventory
Question
4 answers
Dear All,
I would appreciate if you could give an advice what is the best approach how to model phosphorus emissions to water in an Life Cycle Inventory, if only the amount of applied fertilizer is known?
Thank you!
Relevant answer
Answer
for calculate phosphorus emissions, you can use SALCA model.
  • asked a question related to Inventory
Question
5 answers
I am working on the methodology section for my dissertation and would like to use the Early Trauma Inventory to collect data on retrospective child trauma and the developmental timing of first trauma occurrence. Ideally, I would like to collect all of my dissertation data virtually (online) but am aware of the potential challenges that can arise when collecting trauma data. I am looking for advice/tips/protocols for collecting retrospective trauma data virtually in the safest and most ethical manner.
Relevant answer
Answer
If you are thinking of CSA, , may be useful for the reliability of memories. Kamala London
  • asked a question related to Inventory
Question
1 answer
I am doing a research project on prolonged social media use and the mental well-being of college students. I want to compare time spent as well as gender to the results of the Beck Anxiety Inventory and the Beck Depression Inventory. How would I go about comparing these and what statistical test would I perform?
Relevant answer
Answer
It sounds like you want to do a pair of regression analyses with social media use and gender as your predictors in each. You might also want to include interaction effects to see if the effects of social media use differ by gender.
  • asked a question related to Inventory
Question
3 answers
Hello,
does anyone have experience with interpreting values of a 10-item short version of the Big Five Inventory as proposed by Rammstedt et al. (https://zis.gesis.org/skala/Rammstedt-Kemper-Klein-Beierlein-Kovaleva-Big-Five-Inventory-(BFI-10))? My question would be what constitutes e.g. a high vs. low neuroticism value.
Many thanks in advance!
Relevant answer
Answer
Anna-Maria Meck, you're welcome, good luck & keep safe.
  • asked a question related to Inventory
Question
1 answer
I'm looking for different versions of the French translation of the Bem Sex-Role Inventory. Thanks in advance!
Relevant answer
Answer
The Bem Sex-Role Inventory: Validation of a Short Version for French Teenagers (https://hal.archives-ouvertes.fr/file/index/docid/387229/filename/Fontayne_etal_ERAP2000.pdf)
  • asked a question related to Inventory
Question
3 answers
Kindly refer me to any valid concept inventory test on the atomic theory or atomic structure.
Relevant answer
Answer
Yes, I humble to think, that we have one that is very useful in the old atomic theory, Prof. Bongani Prince Ndlovu
"The basic idea of the old quantum theory is that the motion in an atomic system is quantized"
cc Wiki:
Best Regards.
  • asked a question related to Inventory
Question
2 answers
I am interested in measuring stress in speech and language pathologists.
Can you give me information on how to access the stress inventory of a speech therapist and language pathologist?
Thanks in advance,
Emina
Relevant answer
Answer
Good Evening ...Useful document is attached
  • asked a question related to Inventory
Question
1 answer
Please can someone advise me on the scoring for The Academic Success Inventory for College Students? How are the subscale scores converted into a scale score from 1-100?
I have contacted the author for the complete directions, as it states to do in a publication about the measure, but I have not had any response.
The directions also include a scoring template, a score sheet, and cutoffs for the 25th percentile score. These would be helpful too if possible?
Relevant answer
Answer
@fiona did you ever find the scoring
  • asked a question related to Inventory
Question
4 answers
Because of my research area comes under this topic, so I want to study more information about this content.
Relevant answer
Answer
@Indumathi Padmanaban, check this book out “Queues, Inventories and Maintenance: The Analysis of Operational Systems with Variable Demand and Supply (Dover Phoenix Editions)”by Philip M. Morse. Best Regards
  • asked a question related to Inventory
Question
2 answers
I am submitting my senoir thesis and i would like further information on this scale. I am looking for the margin of error for the PSQI, the BRS and the oldenburg burnout inventory
Relevant answer
Here you have PSQI scoring
  • asked a question related to Inventory
Question
2 answers
Hello,
My research investigates certain aesthetic preferences with regard to personality. In my first survey, I used the BFI-2-XS but I believe some questions received almost similar scores from the entire sample. I am now preparing to launch another survey but I am afraid if BFI-2-S would be any better. I have also considered HEXACO but I am not sure about the psychometric properties regarding any of the above in the Egyptian context. On another hand, would you advise another inventory for that (aesthetic preferences) purpose other than the five or six factor inventories? (i.e., PMAI, or Myers-Briggs)?
Relevant answer
Answer
Dear Mr Kahlil, maybe this can give some thoughts when it comes around to these tests. see at pdf, or DOI:
  • 10.47485/2693-2490.1047
  • asked a question related to Inventory
Question
3 answers
I would like to know how to calculate the sample size for the inventory of trees in the agricultural landscape (Agroforestry diversity and allometric inventory).
The first study area has 32626 ha, and the second has 101064 ha.
I intended to use the cross-plots along the transect.
Relevant answer
You sample c. 5% of the area using a minimum of 30 quadrats or trees to fulfil the central limit theorem :)
  • asked a question related to Inventory
Question
3 answers
I am currently doing my undergraduate research regarding burnout among medical students. Most of the studies I have read made use of this tool. I am having a hard time getting a copy of this tool. Is this available for free?
Relevant answer
Answer
Hi Shekinah, you can find the items of the Maslach Burnout Inventory - Student Survey in the appendix to this paper: Schaufeli, W. B., Martinez, I. M., Marques Pinto, A., Salanova, M., & Bakker, A. B. (2002). Burnout and engagement in university students: A cross-national study. Journal of Cross-Cultural Psychology, 33(5), 464-481. https://doi.org/10.1177/0022022102033005003
  • asked a question related to Inventory
Question
3 answers
I conducted ESEM and CFA on two different questionnaires, Big Five Inventory (BFI) and Symptom Check-List (SCL). The BFI gives 5 factors, E, A, C, N and O. The SCL gives 9 factors and a general G factor (Bifactor). I would like to test the path G on E A C N O. Whatever method I use (ESEM, CFA, ESEM within CFA) it does not work because of non-convergence.
Is it legitimate to replace the path analysis by a classical multiple regression performed on the factor scores yielded by the software? Thank you in advance for your answer.
Relevant answer
Answer
Yes, this is entirely possible. One issue might be the "attenuation" of your effects due to unreliability in factor scores.
  • asked a question related to Inventory
Question
7 answers
The Beck Anxiety Inventory is one of the best tools to assess anxiety level. It can also be used for research purpose. But, can anyone tell me how to interpret the score and how to assess anxiety levels (mild, moderate and severe) from the score?
Relevant answer
Answer
The following RG link is also very useful:
  • asked a question related to Inventory
Question
2 answers
I am doing my research on the area of motivation and twice-exceptional students. It will be based at a middle school with a 2e program. I was thinking about the Academic Amotivation Inventory (AAI), but I can't find it. Please give links.
Relevant answer
Answer
In addition to Martin mentioned above, the following should be useful:
Best of luck with the work!
  • asked a question related to Inventory
Question
1 answer
Hello,
i am looking for the Arabic version of Posttraumatic Growth Inventory for Children-Revised.
I would be grateful if someone could help!
Relevant answer
Answer
Not yet
  • asked a question related to Inventory
Question
3 answers
I believe that naming comes at the end. However, I am struggling with naming right now.
I have developed a mobile application for keeping the inventory of the science lab at high school.
Do you think this name suits it?
Development of mobile application based inventory for science lab of high school?
Relevant answer
Answer
"Mobile Inventory App for Science Lab of High School"
  • asked a question related to Inventory
Question
4 answers
Like a questionnaire/s that an undergraduate can access, it could be similar to (CAIMI) Children’s Academic Intrinsic Motivation Inventory. Thank you.
The main subject was English (as much as possible).
Relevant answer
Answer
I suggest the intrinsic motivation inventory (IMI)
  • asked a question related to Inventory
Question
7 answers
I am doing my dissertation using a Bem Sex role inventory that classifies people into feminine, masculine, androgynous and undifferentiated based on the median split using both scales (feminine and masculine).
In my case if the person scores equal and above 103 on fem and below 90 on musc scale they're classified feminine.
if scoring below 103 and equal and above 90 then classified as masculine.
If scoring equal and above 103 and 90 and both scales considered androgynous.
If scoring below 103 and 90 considered classified.
Any idea how I can compute those variables in SPSS, please? I am completely lost.
Thank you.
Relevant answer
Answer
Hello Mikaella,
So, at present you have two scores for each case: (a) fem; (b) masc. And you want to take these scores and generate a single classification variable that will have four possible categories, is that correct?
If so, try this spss syntax, which will create a new variable, class:
******
compute class = 0 .
if ((fem > 102) and (masc < 90)) class = 1 .
if ((fem > 102) and (masc > 89)) class = 2 .
if ((fem > 102) and (masc > 89)) class = 3 .
if ((fem < 103) and (masc < 90)) class = 4 .
execute .
value labels class 1 'Feminine' 2 'Masculine' 3 'Androgynous' 4 'Undifferentiated' .
missing values class (0) .
******
Good luck with your work.
  • asked a question related to Inventory
Question
3 answers
The idea would be to pass this questionnaire within a group therapy intervention.
I'm searching this questionnaire in French.
Relevant answer
Answer
Dear colleague,
Try finding the DASS 42 or DASS 21 questionnaire, I think it is translated to French
  • asked a question related to Inventory
Question
6 answers
In the wake of disruption in supply chains fueled by circumstances outside and beyond our control, the discourse then is not necessarily centered on how to build lean supply chains. Extant literature suggests that organizations that practice lean philosophy are more vulnerable to risks and disruptions and thus may take a long time to recover, and bounce back to a state of normalcy. In light of the above assertion, practitioners, academics and experts in recent times are changing the direction of supply chain discourse laying emphasis on building a more resilient organization. Thus, creating organizations that can withstand shocks both from within and outside their control is the expected 'norm'. Building resilient organization necessitates management to undertake activities such as having redundant supplies, facilities, inventories, having slack resources, among others. These practices are in contravention with lean philosophy. Although lean is a great tool that aids in eliminating waste, under the prevailing situations in today's supply chain, is it logical and or, empirically relevant to suggest that lean's potency rather seems insignificant?
Relevant answer
Answer
I think Lean has its place. Within the Factory Walls Lean is still a necessity, maybe even more so at the moment. Volumes have been affected by parts shortages due to the pandemic. However, turnover / profit can be increased by reducing waste, utilising the Kaizen process, driving the reduction of waste in the process and improving quality and improving FTT.
But I agree in some instance it can be a hindrance. Especially if the organisation is running hand to mouth with parts i.e. Just In Time Methodology.
  • asked a question related to Inventory
Question
4 answers
I am looking for alternatives to the PSI questionnaire to access parental stress in the parent–child system... anyone with some suggestions?
  • asked a question related to Inventory
Question
2 answers
An unmanned aerial vehicle (UAV), also called a drone, is the name for any aircraft that can be operated remotely. Presently, there are various small to large models of drones, and these are being utilized for various applications, including pesticide application, disaster damage surveying, logistics, and media. In Japan, the Ministry of Agriculture, Forestry and Fisheries has prepared the “UAV Stand Inventory Manual” for use in forest surveys, which summarizes specific procedures and key points for stand inventory methods using UAV, and provides a formula to estimate the diameter at breast height (DBH) of trees. However, do you think that it has highest accuracy level. We have used the same for South Bengal Nursery and Sal plantation.
  • asked a question related to Inventory
Question
4 answers
A sub-scale in Spiritual Orientation Inventory, the awareness of the tragic have a low internal consistency (.50) but found to be a predictor of PERMA.
Relevant answer
Answer
Thank you Ms. Madelaine Lawrence for your insights.
  • asked a question related to Inventory
Question
4 answers
My lab is looking for a reliable, valid measure of pain for our nonprofit-funded phase 1 clinical trial. We were originally considering the Brief Pain Inventory (BPI) but the paywall (~400) is a bit higher than anticipated. Has anyone had luck with other pain measures similar to the BPI but is either free or more budget-friendly? I did see the McGill Pain Questionnaire, but this appears to require a fee as well (still waiting to hear what that fee will be).
We are looking for a scale that reports both acute and more chronic pain, ideally including history of pain medication/treatment effectiveness. Hence, some of the scales that initially come to mind (e.g., visual analogue scale, numerical rating scale) don't seem like the best fit.
Any help would be appreciated, many thanks!
David
Relevant answer
Answer
Hello David,
Here are a couple of sources that might prove helpful for your search:
Good luck with your work.
  • asked a question related to Inventory
Question
4 answers
RMS is a software application where we document, monitor, track and administer all information in a research lab including personnel, projects, funding, reagents and equipment. So, this makes management, inventory and report generation very easy.
Relevant answer
Answer
The below are great for helping to manage research labs and their communications and lab instruments:
Benchling-Great for sample/inventory management
Clustermarket- Very useful for lab equipment booking and scheduling
eLabNext/RSpace-Two good options for ELNs.
  • asked a question related to Inventory
Question
5 answers
i am working on calculating the carbon footprint of a product, and want to know is there a Life cycle assessment exemple where i can acess detailed information of the Input and Outputs of the inventory ?
Relevant answer
Answer
You can try the free case studies of openLCA Nexus, it is free and reasonable.
Please go through this link:
Best wishes,
  • asked a question related to Inventory
Question
1 answer
Or are there any freely accessible inventories that correlate with the MVPI's constructs?
Relevant answer
Answer
We can use also Minnesota Multiphasic Personality Inventory.
  • asked a question related to Inventory
Question
4 answers
We reassessed the vegetation of Mormon Island, the largest contiguous tract of wet meadow and lowland tallgrass prairie remaining the Central Platte River Valley of Nebraska 40 years after its initial inventory and examined species invasion, climate change, and restoration as drivers of community change. It is on the long side at just over 8,000 words of text, not including the citations. I have been considering a number of journals, but feel like most journals oriented toward a priori research questions don’t publish inventories, and we would love to include the plant list at least as an in-print appendix. However, it goes beyond the traditional scope of a straightforward inventory because of the long-term nature of the data and the theoretically grounded questions we ask. Any suggestions would be greatly appreciated!
Relevant answer
Answer
I second Tom's suggestion: Vegetation Classification and Survey. It's a new journal, and one of the official ones of the International Association of Vegetation Science. Here is its website: https://vcs.pensoft.net/
You could give it a try!
  • asked a question related to Inventory
Question
4 answers
To measure general personality the FFM-based inventories are frequently in use by researchers. Most of which are long and contain 50/60-120 items. As our research design contains other constructs than personality, we are looking for a suitable inventory. Thank you
Relevant answer
Answer
Big five inventory
  • asked a question related to Inventory
Question
2 answers
Hello everyone,
Where can i get the Bell's Adjustment inventory permission for use it in my research.
Relevant answer
Answer
Dear Sir,
Thank you for your response. Actually, i wanted to know who owns the copy rights of this inventory so that i may take written permission from them for using the scale however, i am unable to find any information regarding this since the author has passed away long ago.
  • asked a question related to Inventory
Question
4 answers
I think so that it may depend on the nature of the uncertainty.
Relevant answer
Answer
In general, it is not possible to say which membership function is best for solving your problem. In my opinion, you choose one of these functions as the optimal membership function by trial and error. However, Gaussian functions and their families are considered as soft calculations and are a better option for expressing uncertainty. But that does not mean it is a better choice to solve all the problems.
  • asked a question related to Inventory
Question
3 answers
I would be very grateful for your help
Relevant answer
Answer
  • asked a question related to Inventory
Question
5 answers
Hi,
I am looking for a scale to measure psychological health, sort of like the Brief Symptom Inventory or the General Health Questionnaire, both of which are excellent but pretty costly for a student like me. Ideally I would want a tool that is in English, can be used on a young adult population, psychometrically sound AND has multiple domains or subscales (like these both do). I don't want to use different scales to make a composite dependent variable.
Any leads or ideas would be greatly appreciated.
Relevant answer
Answer
At least, in Spain and several other European countries, they are accessed free of charge by Google and / or by the attached WEB pages. Thanks
  • asked a question related to Inventory
Question
5 answers
HI research community,
I have always been curious about publicly available datasets that can help research community.
I would like to know if there is one place (inventory of datasets) somewhere on web?
If not, I would love to get feedback on what datasets have been the most useful in your scientific research.
I was hoping to get what data sources/databases/repositories researchers use to aid their genomics scientific research, for e.g GEO for expression data, GTEX, HapMap etc. I hope to make a repository for all the collection, if there exists none.
Thanks so much!
Mamta
Relevant answer
Answer
You can search on https://zenodo.org/, which is especially rich for bio-medical datasets
  • asked a question related to Inventory
Question
3 answers
Background of the problem for people non familiar with transfusion:
Every day, hospital transfusion services must guarantee they have enough blood to meet patient transfusion demand. This is very like managing a food stock in a refrigerator but even easier (just one product, one expiration date).
Assumptions:
- RBC (red blood cell) units are kept on a refrigerator with enough capacity
- Maximum expiration date for RBC is 42 days.
- We make a routine order to the blood bank provider (our grocery store) every day from Monday to Friday. We can make additional orders if we run out of stock.
- We practice first in first out.
The model should satisfy the following targets:
- Minimize the expiration rate (the number of RBC units expiring every certain time)
- The less time on the refrigerator the better (eat fresh)
- Avoid extraordinary orders as much as possible (some extraordinary order might be considered to cope with transfusion peaks of demand)
- Note: I have purposely simplified the problem (no considerations of ABO group distribution, crossmatched reserved units, or reduced expiration date of the irradiated blood…).
Non controlled external factors:
- Transfusion rate
- Average remaining time to expiration of the received blood.
What we are looking for is the optimal number of RBC units we must order on a routine basis (M-F) which is the only factor we can adjust to optimize the equation. Resulting figure must be recalculated when transfusion rate or average expiration date of the received units change.
Intuitively, I see how the number of extraordinary orders and RBC freshness are at opposite sides of a balance, because if a higher number of extraordinary orders is tolerated, then it should result in a smaller but fresher RBC inventory. On the other hand, in order to avoid extraordinary orders, you need a greater inventory thus increasing the average age of your products and the risk of expiration.
Any idea or suggestion? Any available script on Excel/SPSS/Stata/R/SQL? Any related bibliography?
I can provide raw data for simulations on demand if someone want to make a collaboration.
Relevant answer
Answer
good work
Interested
best of luck
  • asked a question related to Inventory
Question
2 answers
Hello,
I have an Ecoinvent data base. I am unable to find some chemicals or inventory. i.e. Corn Stover, Monopotassium Phosphate, Monosodium Phosphate, Octanol, Tri-n-Octylamine etc.
How can I find such inventory flow in database?
Thanks in advance!
Relevant answer
Answer
Alireza Moghtadaei I am using Ecoinvent Database.
I am not getting few inventories i.e Corn Stover, 1-octanol etc.
  • asked a question related to Inventory
Question
1 answer
I need to know how to cite the Revised Oxford happiness Scale. And its reliability and validity
Relevant answer
Answer
  • asked a question related to Inventory
Question
3 answers
Please suggest some sources from where I can download free standardized research tools or scales or inventory regarding the subject educational psychology.
Relevant answer
Answer
Dear researcher,
I think that Quality Engineering Techniques are beneficial in each field of industry or science.
Good luck.
  • asked a question related to Inventory
Question
2 answers
Hello,
My name is Coline Mailleux. I am a lecturer at Sophia University in Japan.
For my research, I would like to find a Japanese version of "Intrinsic Motivation Inventory" or "IMI".
I would be very grateful if you could tell me if you know where I could find it.
Thank you very much in advance.
Relevant answer
Answer
Professor Rausch,
Thank you very much! I am so happy to receive an answer to my question.
I have to say that your suspect is very good. I have found this very short paper. Unfortunately, I can not reach the author. But I have translated my own version on the last weekend. I hope I did well. I will try to use it for my next paper. Thank you very much again!!
  • asked a question related to Inventory
Question
4 answers
Differential games is a class in game theory. In inventory management our motive is to stock management. I'd like to know if we can use differential game analysis to deal with Inventory problems.
Relevant answer
Answer
Dear Kumar,
In my humble opinion, they are different. Inventory management plays a critical role in balancing supply availability with customer requirements.
The inventory policies are selected based on problem behaviors and policymakers. There are many types of inventory policy of "continuous review" or "periodic review", such as (Q, R), (R, S),(s, S), and (S, T).
You can refer the attached papers where the inventory was solved using the heuristic approaches in stead of exact method (i.e., simulation, response surface methodology, DOE).
(PDF) A Computational Model for Determining Levels of Factors in Inventory Management Using Response Surface Methodology (researchgate.net)
(PDF) Solving Order Planning Problem Using a Heuristic Approach: The Case in a Building Material Distributor (researchgate.net)
  • asked a question related to Inventory
Question
4 answers
  1. How to find wood specific gravity too?
  2. I am going to calculate carbon stock in particular forest through inventory result.
Relevant answer
Answer
Bishal Kumar Lama -
I saw a manual on ResearchGate of the type described by Abdelwahab Bessaad. There were graphics and regressions for each of some various types of trees regarding allometry. Unfortunately, it appeared that they had misunderstood heteroscedasticity and had printed some incorrect regression lines on the graphs. I tried to explain it to them, but I don't know that they ever made any changes.
Anyway, as Abdelwahab Bessaad said, these allometric equations are by category, and they do vary by tree, thus regression is used, but since you would be looking at a lot of trees, relatively speaking, variance would be a smaller problem than for an individual tree.
Cheers - Jim
  • asked a question related to Inventory
Question
4 answers
Sandra Bem's famous Bem Sex Role Inventory has been used since the 1970s to profile masculine and feminine gender roles. Bem argued that those scoring above the median of a sample for BOTH masculinity and femininity are classified as Androgynous and that these are the paragons of mental health because they can adapt to the needs of diverse demands. By contrast, those scoring below the median for both masculinity and femininity are considered undifferentiated and at the highest risk of mental health problems. This is because they score below the social status quo for positive personality traits that predominate the behaviors and expressions of both sexes. So my question is: "who are undifferentiated people"? What characterize them? What contributes to this profile? What can we do to help them? Any thoughts and/or articles would be most appreciated!
Relevant answer
Answer
Sandra Bem introduced in 1974 the idea that gender roles do not necessarily have to be one or the other, and that the person can be highly feminine, highly masculine or neither, thus introducing the concept of androgynous or undifferentiated personalities; So, according to the Bem Sex Roles Inventory (BSRI) individuals can be classified as male, female, androgynous (both male and female) and undifferentiated (neither predominantly male nor predominantly female).
This inventory consists of 60 adjectives of which 20 are stereotypically masculine, 20 are feminine and another 20 do not have gender typification.
  • asked a question related to Inventory
Question
4 answers
A mathematical model to analyze the combined effects of interest and inflationary rates on inventory systems (World Bank World Economic Indicators database 2019)
Relevant answer
Answer
Thanks for your valuable suggestions
  • asked a question related to Inventory
Question
9 answers
I am planning to measure teacher stress in my research. One valid and reliable instrument I believe I have found is Teacher Stress Inventory by Michael J. Fimian (1984).
I was wondering if this measure/instrument is in the public domain and can be used just by citing the author and publication or should it be purchased?
Moreover, where can I have access to this questionnaire?
Best,
Relevant answer
Answer
It can be downloaded here: https://bit.ly/2TOJCs0
  • asked a question related to Inventory
Question
3 answers
As low scores on the problem-solving inventory ( PSI ) indicate high levels of PSC, AAS, PC ( the three factors of the inventory).
My questions are:
1-Do low scores mean low arithmetic means?
2-Does the lowest value of the mean for a certain item within the factor means that the student possesses this trait to a large degree? Is the opposite true? ...
For example; after statistical analysis of the students' responses on item 15, which states “When considering solutions to a problem, I do not take the time to assess the potential success of each alternative” has got the highest mean (mean = 4.25, SD = 1.32), does the statistical mean for this item indicates that students have the lowest level of perception related to this item? the least mean was item 18, which states “When making a decision, I compare alternatives and weigh the consequences of one against the other” (mean = 2.84, SD = 1.82), does the statistical mean for this item indicates that students have the highest level of perception related to this item?
3-Which of the items in the inventory are negative and should be reversed in the statistical analysis?
I also applied the inventory after the study and noticed that the means were decreased in the post applying.
When performing a t-test, it was found that there is a statistically significant difference in total degree of PSI where t = 12.21 in favor of pre-questionnaire, also all t values for the factors were statistically significant in favor of pre-questionnaire.
Is the interpretation of this result correct, and that the perception of their problem-solving level increased after applying the module?
Thank you very much for deducting your valuable time in informing me.
Relevant answer
Really, I should think a little clarification is further needed to answer your numerous questions here.