Free Will - Science topic

You can try, but I don't think it's possible. Always pay for high quality publication because you'll never regret it :)

Milad Keshvari Ilkhechi, yes, it is possible to define a fastener in Abaqus to work in the direction parallel to its force orientation. One way to do this is to use the Translator connector type. The Translator connector type allows you to define a linear movement along a specified direction. Once you have defined the Translator connector, you can apply a force to it in any direction. The connector will then resist the force in the direction of the connector.

Another way to define a fastener to work in the direction parallel to its force orientation is to use a user subroutine. For more, let's connect on WhatsApp to discuss; https://wa.me/+923440907874

Mendeley is freely available and The Best for bibliometric analysis.

Thanks

Thank you for your response

There are several of them, such as.

1. Business Model Canvas Template: This allows you to sketch your ideas.

2. Gleek: text-to-diagram tool to make it easier to perform data modelling.

3. Business Model Toolbox: this is a collection of tools, methods, and approaches for designing business model.

4. FourWeekMBA Business Model Generator Tool: To create and capture value in marketplace

This is a good question, I was thinking that it was better to provide LD cycles in general because of the light as a stimuli, now I am not sure. Hope someone with more knowledge can answer to you, and now to me.

Have a nice day

Renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy are generally far more sustainable than fossil fuel sources. However, some renewable energy projects, such as the clearing of forests to produce biofuels, can cause severe environmental damage.Fossil fuels coal, oil, and natural gas do substantially more harm than renewable energy sources by most measures, including air and water pollution, damage to public health, wildlife and habitat loss, water use, land use, and global warming emissions.Pollution free is often derived from renewable energy technologies such as solar, wind, geothermal, biomass, and hydroelectric power as a source of energy.Renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy are generally far more sustainable than fossil fuel sources. Nuclear is a zero-emission clean energy source. It generates power through fission, which is the process of splitting uranium atoms to produce energy. The heat released by fission is used to create steam that spins a turbine to generate electricity without the harmful byproducts emitted by fossil fuels. No source of energy can be called pollution-free, because, the use of any source of energy disturbs the environment in one way or the other. A source of energy like a solar cell is pollution free in actual operation but the assembly of the device might have caused some damage to the environment. Wind is a renewable energy source. Overall, using wind to produce energy has fewer effects on the environment than many other energy sources. Wind turbines do not release emissions that can pollute the air or water (with rare exceptions), and they do not require water for cooling. Petrol, diesel, and kerosene are petroleum products and they produce pollutants like carbon-dioxide and smoke. CNG or compressed natural gas is a smoke-free gas and does not spread pollution, and thus used in our vehicles. Therefore, CNG is considered as an eco-friendly fuel.

Hello Agata, May i ask have you solved the problem？

Thanks, I'll try it!

Revered Dr.Andrea Celeste Arismendi Sosa,

Hope you are from developed countries of Europe.

I came across these top ranked Scopus Indexed Journals are mostly waive off for third world countries stakeholders than others.

I have some list of free Scopus Indexed Journals that I will attach to your email ID.

Since you are from Microbiology that I will find some free Journals in your field of study.

Be in touch with my email ID drsenapathy@gmail.com

I will send in the returning mail reply.

Regards

Senapathy

Ethiopia

I think you will find my answer to the following discussion useful.

Please email me how to send you my CV.

THANKS

No, I don't know

thanks a lot

The limit of free fatty acids in emulsion samples (O/W) can vary depending on the specific application and industry standards. In general, the presence of free fatty acids in emulsions can lead to stability issues, such as phase separation or rancidity. Therefore, it is desirable to have low levels of free fatty acids in emulsion samples.

Different industries may have different limits for free fatty acids in emulsions. For example, in the food industry, the Codex Alimentarius Commission sets maximum limits for free fatty acids in certain food products. In the cosmetic industry, there may be specific regulations or guidelines regarding acceptable levels of free fatty acids.

To determine the specific limit of free fatty acids in emulsion samples (O/W), it is recommended to consult relevant industry standards or guidelines. Additionally, conducting analytical tests such as acid value determination or gas chromatography can help quantify the amount of free fatty acids present in emulsion samples and ensure compliance with applicable limits.

Hi,

As far as I'm aware, BioVinci doesn't offer the functionality to create gaps in the data on bar charts.

Hope this helps. 

Yes sir. I'm aware of anode free or zero access batteries. I'm just hypothetically imagine is it possible to get single layer cell. Nowadays composite cathode-electrolytes is possible but I want to about electrolyte free that is one part can be serves the two properties.

Hi Arly, did you find an answer to this question as I will be preparing LiCl for RNA precipitation step in extraction protocol. Thanks

You are asking someone to help you to steal a copy of commercial software. This is not a good idea.

What's available in XLStats that is not available in excellent, free stats packages like jamovi or JASP?

Mohon Paul g_mmpbsa provides more insight of P-L complex binding energies. It provides all the contribution energies i.e., Polar, Non-polar, Vanderwaals, for ligand as well as protein. Even energy decomposition analysis provides information about residues contribution into negative binding free energy.

You can try Embodied Carbon - The Inventory of Carbon and Energy (ICE) database by Hammond and Jones. Available at: https://greenbuildingencyclopaedia.uk/wp-content/uploads/2014/07/Full-BSRIA-ICE-guide.pdf

In addition to Phil Geis question, in what subspecialty. There are hundreds or perhaps even thousands of microbiology journals but many are specialized, for example in pathogenesis or clinical microbiology, environmental, industrial, molecular genetics, etc

Journal should be selected based on your research area on which you are working. Each journal possess its own style and quality. If your work matches their standard you can choose it.

Yes, you can elute DNA or RNA from purification columns using ultrapure water. This is preferable for a lot of downstream applications that are incompatible with EDTA. I almost never use TE buffer.

Use Reseachgate to order free DOIs for non-published data.

https://www.researchgate.net/post/Generate_DOI https://www.researchgate.net/post/How_to_get_DOI_for_papers

Alternatively, upload your article/research paper to the Core Repository of HCommons and get your free DOI there:

CORE Repository

Hope to have helped.

The install files are still availiable on RevMan's website. For the links, please see - https://www.researchgate.net/post/RevMan_has_been_discontinued-does_anyone_have_the_install_file

the first vas was developed over 100 years ago. it is just a straight line with numbers. it is free. no citations. it's just free.

Noureddine Ouerfelli what were the used values for Kd in the calculations?

Some types of sugar-free jams are sweetened with natural sweeteners such as honey or fruit juice. In addition to natural sweeteners, you can also use sweetener powders made from sweet plants. For example, stevia plant, mango fruit extract or xylitol and other natural sweeteners. These sugars are of plant and natural origin.

Try discus the topic with Lixoft they have amazing software and free of charge academic version probably is a possible option. Link below:

I adhere to this question. The solution we found so far was to enter into the instrument computer remotely and we got an extra licence for a 'traveling laptop' to take home.

free5GC (https://github.com/free5gc/free5gc) is such a simulator under development. I do not think using it together with a 5G RAN network simulator is easy though.

Renee, UCLA is negotiating with them and I was told we get another free year.

Micaela, we are using it as interface between users in the lab and the ordering team. From there it goes manually into the UCLA ordering system.

You can use dirac delta function in multiplication with the excitation strength function. Dirac delta can be used to specify the region and time for which you want to introduce your excitation.

I have introduced the source strength for volcano in one of my paper titled "Modeling of Tsunami generated in stratified oceans by sub-aquatic volcanic eruptions" you can follow similar approach.

You can download the ecoinvent database for openLCA for free from the openLCA website. With permission of the ecoinvent centre, the LCIA methods of the ecoinvent database. LCIA methods packs for the ecoinvent databases 2.2, 3.01, 3.1, 3.2, 3.3, 3.4, 3.5 and 3.6 are available for download in openLCA Nexus

You may be mistaken as to the sources of those graphs. They are not produce in .ppt documents, but imported into them as graphics from the output of another program like Excel. Here is a resource to help you with its use:

You can save any "formatting" of a page as a template in the source program for use with other data. Some basic templates may also be provided as examples with the program.

Best regards,

Steven

You can download a free trial version of Design-Expert software for 14 days at no obligation from Hearne Software

I have seen Rtrack (https://www.biorxiv.org/content/10.1101/2020.02.27.967372v1.full) but have not tried it.

Free plagiarism tools are limited. For comprehensive checks, use professional software like Plagiarism Checker X (~$39.95). Prices vary.

Hi.. were you able to reach the authors ? I am also in the same boat, need to get permission from the authors before using it in my thesis. Pls let me know how you contacted them?

Dear Nagham, I suggest you publishing in IJITIS journal with DOI, DOAJ and fast publishing time, free of charge.

Thanks too much Joseph for your response.

Hi Sajidur Rahman Akash

You can use Chembiodraw, it works well for preparing pathways.

Here is a YouTube link that will help you in downloading and installing it for free.

Thanks,

Jing Zhou,

I think there is, and it depends not only on the thickness of MgO, but also on the reference layer itself(just suppose our free layer is a CoFeB single layer). There are several papers for coupling between ref and free layers, e.g. 10.1109/TMAG.2013.2245308. If one carefully modifies the stray field of the reference layer, the coupling can be canceled, in my point of view.

Hi Charlotte. Have you considered WeTransfer for this? If you get a premium account they should be able to send large videos to you or folders or videos and they can also add a comment at the same time. It should also be private only to you.

Best wishes, Kris

Issues in Applied Linguistics. https://escholarship.org/uc/appling_ial

Thanks so much

Dear Egor Ryabhenko Egor,

Thanks for your kind response,

we use the mechanical mixer with a designed shaft to have a good suspension. recently with the change in the speed of the mixed we could make a better flow.

thank you,

You may get some recommendation from these discussions:

I don't know why you would need simultaneous transcription. You could get an electronic recording of an interview transcribed afterwards in a few hours at most.

I just made an correction to the calculation of rest mass of deuteron using electric force. The calculated rest mass is -0.24 MeV/c^2 less than the CODATA value of 1875.61 MeV/c^2. See

Please delete this question. You are asking for someone to give you access to a stolen copy of a commercial product. People who write and develop software sell it to pay their rent, send their kids to school and put food on the table. Stealing from them is stealing. If you need simulation software, consider using free software. I don't know the area, but if you can't do everything you need in R or Python, I'd be surprised.

Joshua Depiver many many thanks sir for your suggestions and help. this article and the method you shared will help a lot.

Regards..

Im intrested in it

While it is not advisable or ethical to obtain CarMaker software for free through unauthorized means, there are legal alternatives to access and use similar software for automotive simulation and testing purposes. Many software providers offer free trial versions or limited-functionality versions of their simulation software that you can use to explore and learn. Additionally, some academic institutions provide access to CarMaker or similar software for educational purposes. It is recommended to reach out to universities or research institutions that have partnerships or licenses with automotive simulation software providers to inquire about potential access options. Remember, respecting software licensing agreements and supporting developers ensures the sustainability and future advancements of such tools.

I agree with Ian F Burgess you really can't equate pay to publish open access with bad journals - many excellent journals are open access only and have been so for some time. However, the majority of well-recognised journals in most fields still retain the traditional model of subscription access in which there is no fee to publish (although as mentioned, most of these now operate a hybrid model where open access is available for a fee). In terms of your specific topic - research methods in healthcare - there are lots but it depends on the type of methods article you have in mind. I'd suggest you look at the impact factor list for relevant disciplines (health sciences/services, nursing, etc,) and draw up a shortlist then do a bit of homework on the sort of articles each publishes. I can imagine that there is a tendency for methods-focused journals to be more likely to be open-access (only) but I am sure you will find one. This will help you avoid any predatory journals (but if you don't want to pay an APC you'll be avoiding them anyway)

Dear Rameshwar Gupta ,

Which compliance KPIs to measure, how to know your program is working, and how to track improvement over time

Regards,

Shafagat

Are you working on specific issue?

Hi Mr Ramesh,

I come accross this question because I am in need with data as well. I am interested with the answers which I could not read here. If possible, could you share the answer with me? Thank you very much

Thank you.

Sure, here are some APC-free Scopus-indexed journals in the field of management:

1. Journal of Business Research 2. Journal of Management 3. International Journal of Project Management 4. Journal of World Business 5. European Management Journal 6. Journal of Business and Psychology 7. Journal of Business Ethics 8. Journal of Business Venturing 9. International Journal of Information Management 10. International Journal of Production Economics Please note that this list is not exhaustive and there may be other APC-free Scopus-indexed journals in management

Plagiarism Checker by Grammarly

For MOF, Schrodinger has a built-in application. I am not aware of COF

You can try International Journal of Managerial and Financial Accounting published by Inderscience.

The majority of reputable journals do not have any APC. Business Administration is too broad, you have to choose the journal in your topic.

Jamie Edmondson I sent your question to chatGPT, could any of this help?

There are many free tools available for content analysis. Here are a few suggestions:

All these tools are free, and they can be useful for analyzing news articles and other types of texts.

Respected Sir,

I had recently uploaded review article manuscript in your journal.

Kindly check it and gave me reply as soon as possible.

Thank you so much for sharing various platforms which could be helpful in guiding a researcher

There are many software options available for statistical analysis, and several of them offer free versions or online access. Here are a few options:

These are just a few of the many software options available for statistical analysis. Each software has its strengths and weaknesses, so it is important to choose the one that best fits your needs and preferences.

John Schloendorn Thank you for your offer to send a free protein ladder. As an emerging lab, we appreciate your kind gesture. However, we would like to clarify that we are facing budget constraints due to setting up our lab for protein purification for the first time, and our current funds are being utilized in purchasing essential equipment and reagents required for protein purification setup.

Furthermore, we are located in a developing country where every reagent and equipment are significantly more expensive than in other parts of the world. This situation further exacerbates our budget constraints and makes it challenging for us to acquire all the necessary materials to carry out our research. We are continuously looking for alternative solutions to maximize our resources and reduce costs.

I will greatly appreciate your help.

Thanks.

Best Regards,

Aimon Khan

The activity of the cross linked material is likely being lost because of excessive modification of the enzyme molecules, resulting in distortion of the structure. I would withdraw samples over a time course and check both activity and degree of cross linking by SDS PAGE. You need to find the point at which the reaction should be stopped. Using a lower concentration of glutaraldehyde will give you more control and more time to do any in process tests. It is worth noting however that glutaraldehyde cross linking will never give a defined end product. Why do you wish to cross link the enzyme? There are potentially better ways of doing it.

ممكن تبعتي الرابط؟