Questions related to Designing
The pattern and design of Military dresses across nations are different, what are the factors that contributes to decide the camouflage design on their dresses?
hii am designing a blast resistant underground structure. is it necessary to provide damping to the structure. my analysis method is equivalent statics method
I am designing a teaching proposal to introduce wetting phenomena and I cannot find published questionnaires to be used as a pre test to access students' pre existing knowledge, ideas etc. I 've tried Scholar, ERIC, physport and Scopus to no avail so far (search terms: wetting, education, questionnaire, pre test, students'ideas, nanotecnology, biomimetics, contact angle, hydrophobicity/philicity, Lotus effect and combinatin of the above). Is it possible there aren't any?
I would like to have some more information for primer design for tRNA's, miRNAs and other sncRNAs.
I have used sRNAPrimerDB and mirPrimer ( for miRNA) before - are these reliable sources?
Any more reliable websites for designing primers?
Do you still follow the same rules as longer primer design ie checking melting temperatures and GC content ect?
Do you have to change your primer design depending on what assay you are dealing with - Taqman ( Stem loop) / probe/Sybr methods (mature miRNA)?
Any information you have on this will be helpful :)
I actually designed that structure but after designing I got some undesired 2D radiation pattern like null in theta= 0 degree. But when I feed it from one end then that gives proper radiation pattern like highest peak at theta @ zero degree. why it is happening?
While designing a questionnaire if we use 3 point it looks easy to answer and is friendly for participant but less detailed is asked 5 looks moderate and 7 is extensive for the participant but very elaborative in study aspect
Designing business information systems refers to the process of creating, developing and implementing information technology solutions to support the operations and management of an organization. This involves identifying business requirements, selecting and integrating appropriate hardware and software components, and creating systems to support key business processes such as financial management, human resources management, customer relationship management, and supply chain management. The importance of designing business information systems lies in their ability to support and improve key business operations and decision-making processes. A well-designed information system can provide an organization with real-time information about its operations, enabling it to respond quickly and effectively to changing business conditions. Information systems can also automate manual processes, reducing the risk of errors and increasing efficiency. By integrating data from various departments, an information system can provide a centralized and up-to-date view of the organization, helping management make informed decisions. In today's fast-paced and competitive business environment, having an effective and efficient information system is critical for organizations to remain competitive and achieve their goals. A well-designed information system can give organizations a strategic advantage by providing real-time information, automating processes, and enabling faster and more informed decision-making.
Topic: Examining the Role of Higher Education Institutions in Designing a STEM Curriculum Aligned with the Demands of Somalia's Economy: A Case Study Approach
Hello Arabidopsis researchers,
I was trying to use the iSect tool for designing primers of T-DNA insertion lines. However, when I am entering the stock number (all of them starts with CS), it seems they are not found by the tool, whereas SALK identifiers can provide right primers. Can anyone help provide an answer ?
My lines are
None of them provide any primers when using iSect tool - http://signal.salk.edu/tdnaprimers.2.html
I wanna investigate the flow properties within the organic parts of the human body. I'd greatly appreciate your guidance on how to effectively model this in a 3D CAD tool. Are there any specific software recommendations for this purpose? I'm particularly interested in designing the lungs and heart from scratch.
Additionally, I'm curious if it's feasible to extract information from alternative sources like MRI or other data. Can anyone shed light on this aspect? If anyone could assist me in locating a solid model for my project, I would be immensely grateful.
Thank you all in advance.
What are the different methods to calculate each parameters in AC conductivity and DC conductivity. Which method is the best method to find resistance and conductivity of thin film. Can we calculate capacitance, impedance, dielectric constants of thin film by the same method of designing circuits.
Hello, we are designing a plasmid for a vaccine, we want to add an intron in the eukaryotic region to improve transgenic expression. But we do not have a sequence of the intron, I have searched in different articles, but without success. How can I search the sequence? Do you know of any that you could share? Thank you
As part of our final year project, we are working on designing an electrical engine mount system. We have chosen to use the Kelvin-Voigt model to characterize the rubber material and have calculated the stiffness (K) and damping (C) parameters. However, we are having difficulty designing the rubber component using ANSYS software to meet the required parameters.
How can we design the rubber part to ensure it meets the specified stiffness and damping requirements?
Thanks in advance
Dear ResearchGate Team,
I always face this problem of deciding how much information should be enough for an IEC that is specifically designed for rural communities. If I add less information and more graphics then it seems incomplete whereas adding more information and using fewer graphics make it boring and unattractive. Is there any solution to it? How can we share the complete information, and make it attractive and easy to understand? What are your opinions?
Thanks in advance!
Hi wanted a help in creating a simple throughput analysis model of packing shopfloor . I'm planning to use SIMIO for this and wanted someone to help me in designing the model
I am planning to conduct experimental studies with various HMI designs. I want to have a thorough understanding of the conventional HMI design process. For example, guidelines for text size, color, and placement of various process parameters and controls.
We are designing the test where we will select a specific bacteria from different samples and we will seek to find this bacteria with the characteristics that we are looking for (genes), it will be evaluated by biosafety tests, sequencing, etc. (If it is safe and has the gene, it is classified as apt, otherwise it is discarded ).
We have several variation factors such as the type of samples (food, environmental, feces), culture conditions (aerobic & anerobic) and media (2 different). The number of isolates will be equally distributed according to the combination of each factor.
I have searched the literature and have not found a statistical test for qualitative variables that can help me to determine the sample size.
The closest method that I have found is where I should search for similar studies to determine the probability of finding the desired characteristic and from there estimate the sample size. Although I'm not sure if it's the best method.
20mmx12mmx25mmcore is ferrite core, Inductance of Input CMC is 7mH, Input DMC is 300uH and Output CMC is 50uH
I am designing a moderated mediation model (Hayes' Model 7). I want to use a 5-point Likert scale as a moderator variable in my model. Will this cause a problem? Or do I need to make an adjustment to use a continuous variable as a moderator? Because in some sources it is stated that the continuous variable should be made categorical. Thank you very much in advance for your answers.
İ am studying on visual perception of visually impaired users and designers. For sharing the act of designing experiencel, i am seeking for low-vision designers if there are any.
I am Ayah Soufan, a 3rd-year Ph.D. researcher at Strathclyde University interested in designing systems to help scholars conduct literature reviews. If you are a Master's student in Computer Science or any related field, working on your literature review of your MSc project, and if you are searching for, reading, and making sense of papers on your topic, I would love to speak to you! This study will take place on Zoom for up to 1.5 hour with a £20 compensation (online voucher). Please fill out this survey: https://lnkd.in/e_vq5Kci Once your eligibility for the study is determined, I will contact you as soon as possible to set a date\time that suits you for the study session.
This week’s blog post is about different methods we have tried in creating tailored messages for intervention studies. Soon healthcare professionals will probably be able to send you automatic reminders generated by ChatGPT, but whether such messages are actually helpful is a question for research. The use of a relevant behavior-change theory is likely to improve their effectiveness. https://sites.google.com/view/two-minds/blog
What are the most important factors to consider when designing a garden or landscape in horticulture?
We are using the CST Studio Suite 2022 version. We are working on the Antennas - Time Domain section. The results we expect to obtain do not actually correspond to the simulation results.
CASE STUDY: We created the design of an antenna fed through two ports (PORT 1 and PORT 2). A DEFAULT signal is given as input for each port, the signal enters port 1 with phase 0° and the signal enters port 2 with phase 90°. By studying the Farfield at a given frequency we expect to obtain a Circular Polarization. The result we get is a linear polarization. That's very weird. We ask for technical support on this issue.
How do we go about designing the water treatment plant and what are the basic things we need to consider in to design WTP
Recently domain-specific hardware accelerators are getting more popular. While designing them what should be the approach? If anyone can guide me here. As I am a bit confused about the implementation part.
What challenges and use cases are associated with designing an optimization xApp for O-RAN?
In O-RAN (Open RAN), xApp communicates with RIC (Radio Intelligence Controller) to impose policies on the radio access network (RAN). The RIC is responsible for managing and coordinating the DUs (Distributed Units) and RUs (Radio Units) in the RAN. The workflow for this process is as follows:
- xApp generates and sends a policy to the RIC.
- The RIC receives the policy and translates it into a series of commands.
- The RIC sends the commands to the relevant DUs and RUs.
- The DUs and RUs execute the commands and update their configurations accordingly.
- The RIC monitors the status of the DUs and RUs and reports back to the xApp.
- The xApp has access to the status of the DUs and RUs and can make updates to the policies based on the received status.
In this way, xApp has access to both DU and RU activities through the RIC. The RIC acts as an intermediary between xApp and the DUs and RUs, ensuring that policies are applied consistently and effectively across the RAN.
The Question is How can we read and check the xApp activities? its inside the RIC or logged in CU DU?
I am designing a microfluidic channel for cell separation. I have trouble to implement continuous phase in EULER - EULER LAMINAR FLOW. I am not getting any flow in continuous phase. Any HELP?
In some cases I prefer to change the way I visualized the project's information (in terms of graphics or layout). To be exact, they differ when inserted in a paper compared to when I bring them in my design portfolio. Is it ethically and scientifically acceptable?
Building habitable structures on water is an interesting concept that has been explored in various ways, from floating homes to entire cities built on water. While there are many engineering and environmental challenges to consider when building on water, there are also many potential benefits, such as the ability to utilize the vast space of the oceans and reduce the pressure on land-based resources. In my opinion, a potential way to power these structures is by the use of hydroelectric turbines located under the structures(buildings) themselves, though the engineering challenges of designing such systems would need to be carefully considered.
Currently yet to develop a graphical representation of how these structures would look like.
PVsyst is utilized to design PV systems, while HOMER is used to optimize microgrids. Which tools are employed for designing bioenergy systems such as biomass, biogas, and biofuels?
Can we propose newer seismic provisions for designing a building along a faultline of tectonic plates? Is it possible to safeguard the occupants of such earthquake occured recently in Turkey of magnitude 7.8 richter?
So, I'm looking to evaluate the mRNA expression of an enzyme produced by bacteria in human feces. In this case, the idea was to isolate the bacterial RNA and perform an RT-qPCR of the enzyme. However, we are not supported designing a primer that aligns with the genome correctly and we also did not find any paper that did this
Abrir no Google Tradutor•
It is always interesting when I write research or participate in professionals or students juries regarding designing religious buildings, that I feel huge gap in acknowledging the role of architecture in educating people about faith in a profound manner. Your thoughts and experiences are appreciated
I'm designing a diagnostic qPCR triplex assay for three parasitic species and have this weird weird thing that keeps happening where I test my assays in singleplex and they're specific but then in triplex one of them isn't. I have done every possible BLAST and bioinformatic analysis to verify that the assay isn't cross amplifying, so I'm certain it's not a specificity issue. There's no genomic explanation and I've also contacted both ThermoFisher (the maker of the machine) and IDT (where we get our primers) and they said there was nothing that should be causing this problem.
The three probes I'm using are FAM, VIC, and TAMRA - recommended by a ThermoFisher rep and our machines are calibrated for all of these (I've seen this weird thing happen on multiple machines). The VIC assay is picking up the FAM target at almost the exact same Cq values as the FAM assay is picking up the FAM target. To me, that means the two species would have to be present in equal parts in the sample and it's not just a contamination problem since I'm putting in just one species' DNA in each well. The VIC assay still picks up the VIC target, but LATER than it picks up the FAM target. So apparently the VIC assay is picking up a completely unrelated species far better than it's own target species?? I think not.
I've done so much to verify that it's not a specificity issue, including running the VIC assay in singleplex with the FAM target DNA and only two wells of a positive control to make sure the qPCR worked - it showed absolutely no amplification in any of the FAM target wells. My NTC wells are always negative and my positive controls always work. I've reached out to anyone I can think of for help because I don't know what on earth is going on and no one has been able to give me even any possibilities. I have this weird feeling it's something with the settings on the StepOne Plus, but I'm not sure what.
Has anyone else had anything like this happen? Or does anyone have suggestions of other things to try?
have to make a brief analysis and capacity of the plant is given and operating pressure is given only?
(design of Kettle reboiler in gas purification plant of capacity of 100 MMSCFD, operating pressure of plant is 800 PSIG)
I am designing an inverter circuit to produce 20khz, high current and high voltage power for an ultrasonic transducer.
I want to know what are the parameters in choosing a mosfet for my application?
The metaverse is an evolving experience for users (avatars) to have a 3d view of the physical world and collaborate inclusively even in various areas like manufacturing, designing, construction and entertainment.
What do you think will be the biggest security challenge users might face?
With an expectation that machine-readable tables of structured experimental data add research value.
The ASCII smaller text set null character is an escape zero “\0” or 0x00 digital hash.
The full Unicode character set is consistent as linked to binary and contains a null character where null is U+0000 with symbol U+2400 (and is used as a string terminator in the C programming language).
Given digital information can be of different types (such as string or numeric among others), and that the value of zero is not null, still previous and active sentinel null character representations include the “-9999” and “NA”. Yet a control character requires a unique binary hash designation to be consistently stable. I have recently seen regular non-standard data error values returned including, “NAN”, “ERR”, and “INF”, among others (Excel has a #NAME? construct, and there is the SQL regular NULL). Software de facto handles data type and memory allocation because each data element type is comprehended into different memory configurations and sizes at run time.
In Python, the generic data object type is None or a NoneType, where the included 1985 standard numerical IEEE 754 floating-point representation is NaN.
In NumPy, the typical np.nan provides for the None, including the positive and negative infinity, and the not a number designations.
NumPy is the basis for the Pandas DataFrame None representation, which automatically converts across the object and number (until a native Pandas Null emerges).
Hi, could anyone have an idea about meaning of modular primers and how can we design them, and the name of tool or website which can use for designing.
I am used to pre-incubate the test compounds with enzyme for durations ranging from 15 min to 45 min before adding the substrate and initiating the reactions. However, in process of designing a high-throughput method, that seems to be a lagging factor.
Hence the question.
I am designing the experiment on application of Boron (H3BO3) on seedlings and checking if there's any result in blind plants.
Most teams use units kg/ha, only few mg/L.
I would like to convert the data from kg/ha to mg/L, is it possible? Can you please help me?
How would a presenter present 20 minutes discussion on in-silico design of Alzheimer's drug? Please, I need an expert contribution
I'm designing a construct with iCre. The sequence from the publication describing this modified Cre sequence for the first time (Shimshek et. al 2002, genesis, vol. 25;32;, no. 4;1;, pp. 19-26) differs quite a bit from ones used in recent publications even if this paper is cited for the sequence used. From what I noted some modifications at the start and in the end are common. I would be glad for some input on this topic.
In the dynamic test of beam-column substructure, what is the basis for selecting the mass and impact velocity of drop hammer?
I am looking for a scientific tool wich be able to draw MOFs representative images. Do you recommend me any? Preferible free.
Thanks you so much in advance
I am using Solidworks for my design. is there any software where designing forging die becomes easier?
I am working on designing a GPS L1 C/A signal simulator in MATLAB but there are a few things that are confusing me
1. After calculating the doppler frequency how to add it to the signal?
2. How to apply the code phases to the signal
3. When it comes to direct spread spectrum sequence is there any quicker and efficient way to spread all 5 subframes data with the spreading code?
While designing a model on SAP2000, post analysis when we perform the design check, there's a colour bar to the right hand side of the window with some values. I'm assuming that these may be the demand to capacity ratios because when these values are >1, the members become red (as indicated in the colour bar) and indicate a certain failure. Assuming I have dealt with all types of failure (as indicated in "Identify all failures"), which region should the members lie in? The answer can include suggestions where economical design is considered and ignored as well. I only wish to be clear with the underlying concept. I have attached an image of a frame I've designed for clarity.
When designing the questionnaire for EFA, what do I need to keep in mind when it comes to the order of the questions?
More specifically, does the order of the questions need to be completely randomized or is it generally allowed to still ask questions in topic blocks according to potential factors/constructs I have in mind?