Science topics: Chemistry
Chemistry - Science topic
Chemistry is the science of matter, especially its chemical reactions, but also its composition, structure and properties. Chemistry is concerned with atoms and their interactions with other atoms, and particularly with the properties of chemical bonds.
Questions related to Chemistry
Hello! What are the oldest literary sources you know that would mention pharmaceutical salts? I am aware of the first cocrystal [benzoquinone + hydroquinone] (1:1) investigated in 1844, but I could not find any mention of the first (or even the first described) pharmaceutical salt (Wohler, F. Untersuchungen über das Chinon / F. Wohler // Ann. Chem. Pharm. – 1844. – V. 51. – P. 145-163). If you know of such sources, please share them. Thanks in advance
In the following article's ESI, it seems that in situ decomposition of 2,5-Dihydroxy-1,4-benzoquinone (DHBQ) lead to the formation of oxalate under hydrothermal conditions.
Can someone explain the mechanism/pathway behind it?
Ref.: Science 374, 1464 (2021)
Please correct me if I am wrong by any chance.
Thanks in advance.
I would like to generate a *.sdf file like those posted NIST Chemistry Webbook from a *.log or *.chk Gaussian 16 file and cannot immediately find how to do this. Many thanks for helping me.
Mehlich-3, 20 L final volume:
0.2 M acetic acid (230 mL concentrated glacial acetic acid, ACS)
0.25 M NH4NO3 (400 g ammonium nitrate, ACS)
0.015 M NH4F (11.1 g ammonium fluoride, ACS)
0.013 N HNO3 (16.5 mL concentrated nitric acid, ACS)
0.001 M EDTA (5.85 g EDTA free acid, ACS)
Purpose: Soil nutrient extraction for boron, copper, zinc, phosphorus, iron, manganese, magnesium, potassium, calcium, and sulfur to be measured by ICP-OES.
Once all compounds are combined and dissolved, my Mehlich-3 extractant has a pH of approximately 3.2 instead of the pH 2.5 the SOP I'm following indicates the extractant should be. Should the unadjusted pH of the extractant be 2.5 and, if not, what acid would be appropriate to adjust the pH without impacting extractant performance?
Some preparation instructions suggest making a 3.75 M NH4F + 0.25 M EDTA free acid stock solution and adding a volume of that rather than adding NH4F and EDTA directly to the extractant as I'm doing above but I've never managed to get the EDTA to dissolve after dissolving the NH4F using that approach.
If anyone can assist me, please. How do you measure ammonium and nitrogen from urine? what is the best simple method for someone who is new in chemistry if you can recommend the site where I can find the experiment of measuring ammonium and nitrogen would really appreciate it.
How long does it take to a journal indexed in the "Emerging Sources Citation Index" get an Impact Factor? What is the future of journals indexed in Emerging Sources Citation Index?
We can test an antagonist e.g. at 10uM with varying concentrations of agonist. We can then use Schild/gaddum equation to find a KD (also known as KB) for the antagonist.
If i was to change antagonist concentration to some other concentration like 100nM, but test with same agonist, will the KD calculated for the antagonist change or not
Data augmentation techniques drastically improved AI models while dealing with images and text, however, it is not so obvious how to translate these approaches to chemistry and materials science. What methods do you know and how legal do you think they are?
I have some flyash and want to leach out Al2O3 and SiO2 using NaOH. IS there any additive which can help me to improve rate of leaching or dissolution .
We talk about the round oval shape objects. Grid is 15 um. We supossed some kind of drug crystals, but patient has no special medication.
Hi, I need to make an optical window 0.5 - 1mm thick and 6 mm in diameter from PMMA. I would really want to master the skill of production instead of buying some slug or film sheet because later would need to modify the shape ( make a wedge instead of a plane window ) and so on.
I am planning to make a mold using a 3d printed circular part ( see the drawing attached ) wedged between two microscope slides.
We gave it a try and made a sample, but at that time we didnt have the vacuum chamber and poured the pmma into the could mold. ( see the picture attached )
The problem is that the fist sample was quite large and separated from the glass rather easily, which is not the case for smaller sample. The second problem is bubbles.
Could you please suggest the exact step by step scheme to follow ( the concentration, temperature mode, time frames and so on ) to improve our results and obtain bubble free sample which can be safely parted from the mold after the hardening.
What I have:
1. Methyl methacrylate (CAS Number: 80-62-6) from sigmaaldrich
2. Azobisisobutyronitrile (CAS Number:78-67-1) from sigmaaldrich
3. magnetic stirrer hot plate, beakers, vacuum chamber, heating chamber
Thanks a lot in advance.
I have synthesized cerium oxide nanoparticles (CeO2 NPs) using the combustion method. My attempts to functionalize the NPs using the APTES have failed so far. After APTES functionalization, the particles are not stable; they settle rapidly. I would greatly appreciate it if someone could propose a solution and reason to the problem.
I am an undergraduate at the University of Cross River State, Nigeria currently pursuing a microbiology program. For familiarity and enhanced understanding of the course, I wish to seek recommendations on the virtual/simulation laboratory software that would be very helpful to me and my colleagues. With my interest in research too, I will be pleased if a research simulator is recommended to help widen my understanding of Microbiological research.
Your recommendations would go a long way to significantly contribute to my academic career as well as my colleagues.
I'm finding some cationic molecules like below.
I tried finding on www.sigmaaldrich.com , but couldn't find anything.
Where can I buy some molecules like this?
ref)Ikeda, Taichi, and Yoshitaka Matsushita. "Tetrahedral Tetra-cationic ionic liquids." Chemistry Letters 49.1 (2020): 14-16.
I will be working on a slow-release fertilizer for my undergraduate thesis, but I am confused about how other authors measure cumulative nitrogen release for a time interval (including the instruments and calculations)?
More exactly how they measure the exact nitrogen released each time.
Please provide a step-by-step process for a rapid water test.
-Thank you for helping a chemistry student.
Some Oxford Nanopore kits have Primers with 5 ' modification that provide ligation to adapters without the need for ligases (ligase-free method), as in 16S barcoding kits. Does anyone know what modification this is or the chemistry involved in the process? I'm very grateful if anyone can help me with this information. Thanks.
I wonder if the removal of pi bond and the addition of heteroatoms such as halogens would increase or decrease the energy gap between the ground state and excited state of the electrons.
We are living in a world where recently Artificial intelligence is being used in many applications for prediction of many events and things. We all know that the amount and balance of certain Chemicals in the brain have a role in causing us think creative , feel emotional or happy etc. I would like to learn the valuable opinions of Scientists on what specific roles Chemistry would have in creating human conciousness ?
Salt has an ionic bond. It's chemically bonded. So, when it dissolves in water, the ionic bond is somewhat lost. But, people argue that it is a physical change because-:
a) The mixture of salt and water can be separated by evaporation.
b) No new substance is formed.( how though? isn't salty water completely different from just water or salt alone?)
c) There is no energy produced. (but then again when we tear paper, the ripping creates some energy...so how is there no energy in a physical change?)
Thank you in advance,
I am evaluating the options, especially in the true open-source world, for making reliable calculations with high-accuracy using quantum correlation methods.
I synthesized a molecule. I want to know what are the self-assembled structures possible for it through hydrogen bonding.
If possible, please suggest me some free software available (installation-based or online)
Any relevant suggestions are highly appreciated. Thanks.
Chemistry question: I've received compounds to dissolve at 10uM. They sent MW, FW, and mg amts for each. Some cpds MW=FW, but others have "salts" added, and those have FW>MW. Should I use MW or FW to convert the mg amt to moles for calculations to achieve uM solutions?
Hello everyone, I have a question about COD (Chemical Oxygen Demand) electrolysis of organic compounds. When doing the COD analysis of the initial sample before treatment, why did it produce a high COD level? what factors in the COD level caused the initial COD level to be very high?
Meanwhile, after being electrolyzed (after treatment), the COD level decreased, what caused the COD level to decrease and were there any structural changes that occurred related to the reagents in the electrolysis process (organic compounds, electrolyte, additional H2O2, COD reagents) .
So, for example, the sample is acetaminophen
Before treatment (acetaminophen + aquades), why was the COD level of the acetaminophen sample so high? what causes the high value? and why after treatment, the COD level of acetaminophen decreased? what causes the COD level of acetaminophen decrease? Are there any structural changes that occur in acetaminophen related to the reagents associated with the electrolysis process after treatment? if there is a change, what kind of change and how?
Thanks in advance.
How can a correlation be obtained from subatomic to superatomic? Why does the subatomic behave differently than the superatomic? Why does something that makes something behave differently from what it creates? Let's give an example to this first: Let's think of H2o water, hydrogen and oxygen: Here, hydrogen and oxygen atoms will behave differently from the water they form. So why is this? Is this due to the change in chemical structure? This means that the change in the chemistry of atoms under matter ensures that matter itself exists on matter. So what provides this? So what is it that changes the chemistry? How is it changing? So why does the thing that brings together this changing chemistry (structure) become matter? If the chemistry changes in the atoms under matter, what do we say if this matter is different from the substance itself, and since the submatter will normally form the above matter logically? If atomic chemistry, that is, subatomic, changes, it becomes supermaterial and they behave differently. Here we reach something: In contrast to atoms, there is something else under matter. In other words, apart from quantum, there is a structure under matter that interacts with atoms under matter and forms the upper part of matter. What should we call this:? Should we call it such a thing that it interacts with atoms and changes their structure and turns them into normal matter? So let it act in classical physics. So what makes atoms move in classical physics? Let's ask this. How do we determine whether something is in quantum or classical physics? If something moves relative to atoms, it's quantum. If there is something directly related to matter itself, it is classical physics. So what is it that differentiates atoms from what is directed directly at matter itself? Let's first explain the quantum theory: An atom could be in more than one place at the same time. So this would mean that an atom cannot be in more than one place at the same time when it interacts and changes chemistry. But what does it do? What kind of thing makes atoms lose this quality? What kind of thing in the universe loses the function of a particle being in two places at once? First of all, let's ask this: Being in two places at the same time;. It means being able to copy yourself and be able to influence at different points. So this thing, the thing that changes the chemistry, must have a function that destroys this quality. What thing in the universe reduces or eliminates influence at different points? What is the most influential thing in the universe? Matter is the answer, which occurs through this space-time warping. So as a result, Isaac Newton's m1.m2/r'2 formula gives us the output. As the distance between the objects increases; gravity (ie, space-time warping), that is, the twist by matter would decrease. In that case, as the distance between matter increases in the universe, the relationship that a substance establishes with submaterial and supermaterial brings us the existence of the supermaterial. Thank you.
In electrofenton, there is one method, namely electrochemical peroxidation, what are the advantages of this method so that it can degrade organic compounds? How is it different from electrocoagulation? what makes electrofenton/electrochemical peroxidation better than electrocoagulation?
Also, there are electrocoagulation and traditional coagulation, what makes electrocoagulation better than traditional coagulation? as well as the electrofenton and traditional fenton, why is the electrofenton better than the traditional fenton? What is the effect of Fe and H2O2 in degrading organic compounds? why when an electric current is applied the results are better? if there is no electricity, is it also good to degrade organic compounds?
Thanks in advance
What parameters play a role in the ability of amines to be protonated in water? Can the base strength of amines be a sufficient measure to compare the protonation ability of two amines? For example, is the protonation ability of n-butylamine more than morpholine?
Hi everybody. I have a question about study kinetics. So, I did electrolysis by dissolving organic compounds with aquades as a sample under acidic conditions with Na2SO4 as electrolyte, with additional H2O2 (Fenton reaction) using iron as anode and graphite as cathode. In discussing the study of kinetics, I found that if the kinetic graph that R2 close to one or almost linear is in pseudo-second order graph, what does this pseudo-second order mean? what does pseudo-second order actually mean? i was told that "the pseudo explains that something is involved but doesn't appear in the rate law, for example the solvent or there is usually the fraction of the reactant that matters" is that true? So, if what is meant by second order is that there are two reagents that have an effect in this case, for example H2O2 and Na2SO4, but in pseudo-second order something is involved but it doesn't appear, what is it? also, if you also know, what kind of reaction mechanism that produces the pseudo?
Thanks in advance
I want to simulate a premixed combustion case with Hydrogen/air (or oxygen) chemistry.
I know simulating a non-premixed combustion case with hydrogen/air detailed chemistry means injecting hydrogen as fuel and air as oxygen at a particular temperature and pressure and using any available chemical mechanism (GRI, UCSD, etc...).
But, what is meant by simulating premixed combustion with detailed chemistry?
:I don`t understand this bold part
The mono- and bidentate bonding are formed via protonation of the surface hydroxyl group and releasing one water molecule, leading to a strong P-O-M bond.
Article title:Organic Hole Transport Layers for Efficient, Stable and Scalable Inverted Perovskite Solar Cells
Hello everyone. I need a little help here.
can we use essential oils to reduce chlorinous odor in a hypochlorous acid solution without decreasing free chlorine or pH value? any toughts and propositions are much appreciated
I saw this sentence .Hydroxyl group and amino group are the both nuclephilic. So no reaction will take place
I have prepared a sample and apparent physical properties show excellent coverage, but I do not how to explain. can anyone help me?
I am carrying out a Research on the effect of blended learning on senior secondary school students achievement and retention in Chemistry. Could someone
help me with materials?
would like to learn more about appropriate material for the application of PPE in Epidemiology.
As all the material seems to be Polyethylene/Polypropylene, would love to learn, whether it is possible to use Polyamide material instead? Are the properties sufficient?
If Polyamide does the job, are normal Snowboarding and Fishing Overalls an alternative to the ordinary Hazmats?
Cherish your feedback.
Defining the dilution factor is very important when we are working at the level of ppb (parts per billion) or ppt (parts per trillion). Other day, I was working on plant biomass samples to analyze available Si (Silicon) in plant biomass. I have gone through several steps of dilution and became so confused about what is DILUTION FACTOR. I did several dilutions at several steps (digestion, adding chemicals, again diluting to come up with the range of AAS) and it became so complicated. As always, I approached Dr. Rafael Santos and he solved this problem very easily, I would say just in 10 minutes when I was struggling for an hour. Finally, Dr. Santos made a good explanation with their whiteboard and step by step he came up with the solution. Again, doing a Ph.D. is not just collecting and analyzing data but also needs to understand the chemistry happening in between. If you don't know how to do it then seek help. Asking someone doesn't mean your basics are not strong, asking someone means you know what you're looking for but you don't know how to approach it. I am thankful to have Dr. Santos as my mentor, peer and guide. PS: Here's complex whiteboard solution in the picture :) #ppb #ppt #help #academia #PhD #chemistry #data #AAS
Research chemists continue in their slow uptake of preprints. I've lately suggested one key reason for this unique behaviour of scholars in the basic sciences in two OA studies, one published by Publications:
and another by Insights:
What is your opinion on the origin of this delay? Has your team recently embraced preprint publishing? What are your favorite preprint repositories?
Thank you in advance for your insight.
Does anyone has an experience with sodium tert-butoxide? How dangerous it actually is?
Do I need to use a glovebox while weighting and handling it?
Do I have to dissolve it in THF at -30C or room temperature will also do?
How do you store it after the can is opened?
We have 100g of sodium tert-butoxide in total, the planned amount for my synthesis is ca. 1.5 g.
This is a graphical abstract image from one of the paper of eminent total synthesis chemist KC Nicolaou. Can anyone tell me how I can draw such type of image?
I am working on different polymers and modifying them chemically and I want to write the chemical reaction. If I want to confirm whether the proposed chemical reaction is right or wrong, is there any software or something?
Thanks for your help!
To set things clearly: I am a PhD student working on the process implications of electryfing the ammonia production by replacing conventional SMR with Water Electrolysis. A part of my preliminary work is to assess the difference in theoretical minimum energy consumption. To do so, I have calculated a first approximation by summing up the reactions (SMR, Water gas shift, Haber-Bosch,...) and calculating the enthalpy of the resulting "total" reaction. I have done this for the "Water Electrolysis + Haber-Bosch scenario" and validated the minimum with values from the literature.
However, for the conventional "SMR + Haber-Bosch scenario", values from the literature are different. To be more specific, here is the energy minimum calculated in the following conference paper:
(...) the theoretical minimum of energy consumption for the process itself (represented by LHV of methane) is 22.2 GJ/t NH3 (...)
Conference Paper 2. Kirova-Yordanova Z, Energy Integration and Cogeneration i...
So here is my question: Why use the LHV of methane (instead the enthalpy of reactions) to calculate the energy minimum ? I feel like this is incorrect as I do not take into account the synthesis of methane.
Thanks in advance for any answers,
Hope you are doing well!
What are the best books in Materials Science and Engineering (Basics and Advanced)? Moreover, what are the best skills (or materials topic related) that materials scientists have to develop and to acquire?
Thanks in advance
This statement is claimed by
Simplistic notion of law of mass action or common ion effect cannot explain it . So what is the reason?
Please do not refer to the references on the paper
Kron I, Marshall SL,
May PM, Hefter G, and Konigsberger E (1995) The ionic product of water
in highly concentrated aqueous electrolyte solutions. Monatshefte für
Chemie 126: 819–837.
what are the possible instruments to use to obtain the purity of a powder (NaCl sold in a pellet form) (has 99% purity or above)?
the cheapest instrument to the expensive one if possible according to your experience
Thank you in advance
0.1 N concentration solution of both was taken, with HCl as titrant abd HPh as indicator. After reaching the endpoint of colourless condition, the colour reappears after continous shaking for 5 mins. even sometimes after 15 mins. How to be sure of that this much time is enough, for shaking to confirm completion of titration?
i have a general question about tissue culture.
I have found the following recipe for Epipremnum Aureum "Marble Queen":
Leaf Explant: MS Medium + 4.54 µM TDZ + 1.07 µM NAA (Thidiazuron in Micropropagation of Aroid Plants by Chen and Wei (2018), p. 105, DOI: 10.1007/978-981-10-8004-3_4)
Specifically, I have the following questions.
1) Do i only need to autoclave the agar with distilled water (I use a pressure cooker for this) and when the agar has cooled down a bit just add the MS, TDZ and NAA and mix it or do i need to autoclave the MS as well?
2) Will the TDZ dissolve in the agar water at all and how hot can the agar water be to add the MS, TDZ and NAA?
3) Is it even necessary to autoclave the water incl. agar (in the pressure cooker) if I clean all the jars with NaClO (sodium hypochlorite)?
Thank you in advance!
Kindly discuss your ideas and viewpoints on the origin of life and the RNA world hypothesis.
What are the contradictory views on why researchers are still unsure about the origin of life through RNA or such analogous molecular intermediate pre-cursors preceding its existence?
"The general notion of an “RNA World” is that, in the early development of life on the Earth, genetic continuity was assured by the replication of RNA and genetically encoded proteins were not involved as catalysts. There is now strong evidence indicating that an RNA World did indeed exist before DNA- and protein-based life. However, arguments regarding whether life on Earth began with RNA are more tenuous. It might be imagined that all of the components of RNA were available in some prebiotic pool and that these components assembled into replicating, evolving polynucleotides without the prior existence of any evolved macromolecules. A thorough consideration of this “RNA-first” view of the origin of life must reconcile concerns regarding the intractable mixtures that are obtained in experiments designed to simulate the chemistry of the primitive Earth. Perhaps these concerns will eventually be resolved, and recent experimental findings provide some reason for optimism. However, the problem of the origin of the RNA World is far from being solved, and it is fruitful to consider the alternative possibility that RNA was preceded by some other replicating, evolving molecule, just as DNA and proteins were preceded by RNA." - Robertson and Joyce
[This is as per the explanation by Michael P Robertson and Gerald F Joyce in the article: "The origins of the RNA world." published in the Cold Spring Harb. Perspect. Biol. 4, a003608 (2012).]
The scientific community must resolve this contradicting conjecture through rational discussion and debate backed by strong experimental evidence on what must be the pre-cursor molecule to the Origin of Life if it is not RNA!
i got my phd awarded recently in chemistry. i want to do post doctoral fellowship in abroad. i request you to suggest me a good country and at the same time a good institute with all details.
We are testing new chemicals for redox flow batteries. We consistently see this weird potential "x" with galvanostatic bulk electrolysis cycling experiments in an H cell, has anyone had this issue before? We have this same issue with the novel anolyte/catholyte chemicals we are testing, so we ran a bulk electrolysis experiment with Fc/Fc+ symmetric cell to see if the issue persisted (both with membrane and with fritted H cells). I see this potential crossover all the time with 100% and 80% SOC experiments, I'm going to test 50% SOC to see if the crossover remains. The reference electrode seems fine based on CV experiments, the reference electrode issues are the only thing I can think of. Isn't it theoretically impossible for the oxidation to start at a more negative potential than the reduction? I see some solvent loss over the period of the experiment. This is the first redox cycle and the crossover is consistent throughout the experiment.
Symmetric h-cell setup
0.001 M Analyte (Fc/FcPF6)
0.1M TBAPF6 in MeCN
10 mL Volume on each side
AMI-7001 selective membrane
BASI nonaqueous coralpor fritted reference electrode (0.01M AgNO3 in 0.1M TBAPF6 in MeCN)
0.27 mA for 1 h (100% SOC)
Forgive some of my ignorance in the math for thermodynamics and heat exchange but my background is heavier in Chemistry and could use some help.
The project is to keep about 70L of water in an aquarium at 17C when the ambient temperature is 22C in the room. The original project built had the following set up:
(Top to Bottom):
1. 80x80x38mm fan running at 5700 RPMs and 76CFM
2. 80x80x20mm copper fin heatsink (0.5mm fin thickness and 40 fins with a 3.5mm bottom thickness)
3. 2-TEC1-12706 hot side towards heatsink, cold side down towards water block (Imax: 6.4A, Umax: 15.4V, Qmax: (dT=0) 63W, dTmax=68C)
4. 40x80x12mm water block centered under the heatsink (surrounded on the sides with 20mm styrofoam and 10mm styrofoam at the back)
5. ~26mm thick styrofoam
6. Wood base
• All power is supplied by an AC/DC converter (12V 20A 240W)
• Power to the system is managed by a W1209 Temperature Control Module (Relay)
• Water flow is achieved by a 4L/min water pump (slowest I can find)
This set up is only cooling the water to 18C at night and will slowly creep up to 18.7 across the day so I know this set up is not keeping up with the heat load. (also worth noting that output temp is about 1.5-2C cooler than input temp to the waterblock). My hypothesis is that the water does not have enough time in the water block for good thermal exchange or that the cooler is not creating enough of a dT in the water block to absorb the amount of heat needed to in that cycle time. The fact that the Aluminum water block has a 5x lower specific heat than water is what is making me think either more contact time or great dT is needed.
My thoughts were to swap out the water block for an 40x200x12mm water block and increase the number of peltier coolers from 2->5 and going with the TEC1-12715 (Imax: 15.6A, Umax: 15.4V, Qmax: (dT=0) 150W, dTmax=68C).
This is where is am lost in the weeds and need help. I am lacking in the intellectual horsepower for this. Will using the 5 in parallel do the trick and not max out the converter? OR Will using 5 in series still produce the needed cooling effect with the lower dT associated with the lower amperage? Or is there another setup someone can recommend? I am open to feedback and direction, thank you in advance.
I have a chemical I dissolve in DMSO. But if I put it in the centrifuge and spin it, all the chemical 'bits' will drop out of its dissolved state and form pellet on side of eppendorf.
Hey, I have been looking for it a lot. Are there sigma + - constants for meta substitution?
And also I couldn't find the sigma * constants.
I am preparing a compilation file for doing MESMER calculations but I am having an issue. I am running some g08 calculations with acetyl and it seems like the transition state from for going to the RO2 to QOOH is unstable as the difference between the target energy and the calculated energy differs by about 0.1 - 1.1. There is too big a difference in the energy barriers between the RO2 and QOOH, but all other energies for the stationary points in the channels are comparative to the expected value. The IRC from the obtained transition state gave a significantly high "jump" in the potential energy graph. Would anyone happen to know what is going on?
We are planning to extract phosphorus from biochar by organic acids. If anyone has some procedure (concentration of organic acids & steps) please inform.
The common method for phosphorus solubilization efficiency measurement of soil microbes is zone formation in agar media (generally Pikovskaya media) but this is a qualitative study. However, there is also a liquid culture method with insoluble phosphorus in liquid media. The estimation of available phosphorus by ICP-OES is quite promising and precise.
I am currently restarting my work on battery management systems, I plan to use Lithium Iron Phosphate cells for their better energy density and relatively better resistance to thermal behaviour than few other commonly sought after battery chemistries. I require some help with good materials or references to help me accomplish BMS for 2W EV. I see that there are Kalman filter based estimations available, but they seem complex and expensive in terms of computations such algorithms require to be implemented.
Kindly request the experienced fraternity to guide me to understand and implement SOX estimation for LiFePO4 Cells.
Thanks in advance.
Dear science community!
I need your help, please!
I`m totally disapointed and at a loss!
In 2020 (at the end of October) there were the IOP Conference Series: Materials Science and Engineering (ICoSiET 2020). Me and my colegues took part in these conference. As the result (like a result of any other conference) the thesis collection should have been published (at the 4th quarter of the 2020)). Unfortanately, these collection still haven`t publised (despite the fact that 2021 is already at its end).
So, I wonder, if there are anybody, who know something about this situation? Maby there are any of those who also waiting for their thesis?
We have wrote lots of messages to the organizators and the head of the university (in which this conference took place) but they stoped to respond us.
I think this situation shows disrespect for the conference participants. And I believe that such situations should be inlighted in our community!
Thank you, for your attention!
We are doing a fab process involving a patterned titania layer sitting on quartz. We now want to etch a few microns of the quartz underneath the titania, in order to "release" the slab. What could be a could wet etching chemistry to etch quartz without etching (too much) titania?
Can you please suggest some *primary amine protecting group* which one do not chemically disturb by *nBuLi* reagent.
I already tried with PMBCl and Boc
In *PMBCl*, it facilitate ortho direction by itself only.
In the case of *Boc* it doesn't stable, hence it cleave during the reaction and enhance the formation of unwanted side reaction.
I'm studying the chemistry of below listed protecting compound
2) Trimethylsilyl chloride
Please give your suggestion which one is compatible protecting group for primary amine in presence of nBuLi reagent.
I am looking for a topic to start my research in chemistry. something which is untouched so far or where research gap persists. A topic which has national and international importance. Completed my coursework so far.