Bibliography - Science method

If your main goal is to estimate values in the larger population, then the formula using the estimated variance makes the most sense. Alternatively, if your goal is to test specific hypotheses, then G*Power might be better suited to your objective.s

The main difference between bibliography and references is that references contain the sources that you have cited in your paper, whereas a bibliography includes all the sources that you have used for your paper, whether they are cited or not.

i sent the request to Mendeley support their answer was:

Hi Fatima,

Thank you for contacting Mendeley Support Team.

This feature is currently under consideration and will be included as part of a future update. The Development Team does not have an exact date on when it will be available. I will still file this as a feature request so our Development Team will acknowledge that this feature is really helpful for many Mendeley users.

Rest assured that once we received an update that this is now available, we will post it in our release notes, blogs in supporthub.

I really hope that this product/policy limitation will not affect the level of service I rendered today.

A workaround for this is to do:

Manual editing:

We had good results by sonification of particles in the cooled solvent and directly afterwards stepwise/slowly adding the polymer. Afterwards stirring overnight. I've done it with micro and nanoparticles.

Idea and concept from publication below:

Cotton wool-like nanocomposite biomaterials prepared by electrospinning: In vitro bioactivity and osteogenic differentiation of human mesenchymal stem cells

You can use a, B, c....... Regards

thanks for answers. The referenve manager automatically removed the duplicates after some time.

You may do the following;

Make sure you have the latest version of Word (Essentially not MS Word 16) by clicking "Help," and then clicking "Check for updates."

Uninstall the Mendeley Word plugin.

Restart your computer.

Reinstall the Mendeley Word plugin.

Regards,

Kind regards, Mr. Jean-Pual Dossous, in response to your question, I consider that it is not yet possible to update the bibliography in different sections of the document. But I suggest thaht you have to prepare separate files and at the end, you combine them as pdf.

I checked the official Mendeley help center and found this:

Position the cursor where you want the bibliography to appear within your Word document. Then click to insert the bibliography.

Note that currently Mendeley Cite does not allow you to refresh the bibliography so only insert the bibliography when you have finished adding all of your citations. We are working to add this; check back for details of when this will be available.

Reference source: https://service.elsevier.com/app/answers/detail/a_id/28671/supporthub/mendeley/role/referencemanagement/kw/bibliography/

I wish you the best.

Universal control channel https://t.me/universalcontrol

Kindly see also the following useful links: https://ufdcimages.uflib.ufl.edu/UF/E0/04/29/32/00001/paris_t.pdf

1. Goto https://citation-finder.vercel.app/

2. Paste all your bibliographies there

3. Select your references highlighted in yellow

4. Download them in .ris extension

5. Upload to your mendeley

ENJOY

Dear We have encountered the same problem, I wonder if you have solved it.

I recommend Zotero, which is smooth and easy-to-use free and open-source reference management software to manage bibliographic data and related research materials.

Irene Ferrer Take a look:

1. https://dspace.mit.edu/bitstream/handle/1721.1/92640/898125039-MIT.pdf?sequence=2

2. https://www.edubcn.cat/rcs_gene/treballs_recerca/2014-2015-02-4-TR_baixa.pdf

3. https://iopscience.iop.org/article/10.1088/1742-6596/1529/2/022093/pdf

4. https://journal.alt.ac.uk/index.php/rlt/article/view/2124/2514

Hi Tania, can you send me the publication that in Chinese I have some colleague Chinese my help in this case

Hi Diana. What are the objectives of the meta-analysis study?

You can also consider the list.  You can find the latest edition if required.

1) Field, A. (2005). Discovering statistics using SPSS. 2ndEd. London: Sage Publications.

2) Mann, Prem. (2001). Introductory statistics. 4th Ed. Upper New York: John Wiley & Sons.

3) Weinberg, S.L. & Abramowitz (2008). Statistics using SPSS: An integrative approach. 2ndEd. New York: Cambridge University Press.

4) Hair, J.F., Black, B.J., Babin, B.J., Anderson, R.E. & Tatham, R.L. (2010). Multivariate data analysis. 7thEd. Upper Saddle River: Pearson Prentice Hall.

5) Ott, R.L. & Longnecker. (2001). An introduction to statistical methods and data analysis. 5thEd. Pacific Grove: Duxbury.

6) Coakes, S.J., Steed, L. & Ong, C. (2010). SPSS Version 17.0 for Windows: Analysis without anguish. Milton: John Wiley & Sons Australia.

7) Grace-Martin, K. & Sweet, S.A. (2003). Data analysis with SPSS: A first course in applied statistics. Boston: Pearson Education, Inc.

8) Mallery, P. & George, D. (2003). SPSS for Windows step by step: A simple guide and reference 11.0 update(4thEdition). Boston: Pearson Education, Inc.

9) Norusis, M.J. (1999). SPSS 9.0 Guide to data analysis. Upper Saddle River: Prentice Hall.

10) SPSS Inc. (2009). PASW Statistics Base 18. Chicago: SPSS Inc.

Remove the software and install it again. This may fix the issue.

I suppose the form should have the following elements:

Author/s of an article. Article title. Journal title. Subtitle Place: Publisher, date, Volume number, pages. Notes

It is important to cite the original source when using an idea, quotation, data, image, etc. that is not your own. Failing to cite your sources constitutes plagiarism. The Council of Science Editors (CSE) style is a standard citation style used across many disciplines in the physical and life sciences. The CSE style encompasses three distinct systems: • Name-Year: In-text citations appear in brackets, and consist of the author(s) last name, as well as the document’s year of publication (e.g. Smith 2008). The end reference list appears in alphabetical order by author last name. • Citation-Sequence: A superscript number (e.g. 1 ) is assigned to a document the first time it appears in the text, and the same number is used whenever that work is cited. The references in the reference list are listed numerically in the order in which they first appeared in the text. • Citation-Name: All references in the reference list are organized alphabetically by author last name, and assigned a number according to their order in the list. This number is then inserted in the text in superscript font (e.g. 1 ) wherever the work is cited.

I think you can try this app:"Stava"

https://www.strava.com/

Many thanks.

I've seen this study before

Galli Mastrodonato, Paola Irene. 1996 .“Le due Indie: E. Salgari e E. M. Forster”, in ID. Ai confini dell’Impero: Le Letterature emergenti. Manziana (Roma): Vecchiarelli Editore, pp. 23-34.

I think it is possible. Maybe just say you are not searching a proper article. Like clinical trials at ncbi. I think you can. I would like to suggest is under advanced

Wolfgang Weinlich. Thank you very much for the bibliography you have sent me. I did not know her. Cordially, María Isabel

Does anyone know how to get a copy of the following article?

"Donor conception: How demographics and disclosure experiences impact donor-conceived adults’ motivations for seeking information about, and contact with, sperm donors. "

April 2021Reproductive Biomedicine Online.

Caitlin Macmillan, Sonia Allan, Melissa Johnstone and Mark Stokes

As per standard citation format - JAYDIP DATTA. (2021, April 15). ENVIRONMENTAL POLLUTION : EXPLORING THE DOMAIN (Version Version 1.0). Zenodo. http://doi.org/10.5281/zenodo.4694832

This is a great resource on citations: https://owl.purdue.edu/owl/research_and_citation/asa_style/references_page_formatting.html

Does that answer your question?

Thanks to all for nice sharing!

If you are reading the prior work just for your literature review, you don't have to meticulously read them as if you are reviewing them as a referee. However, if you identify some errors or shortcomings, take a note of them, perhaps you might end up with another paper idea from them. You just have to identify what is different compared to your paper and how your paper is an improvement or a different but important paper looking from another aspect, etc. If it is highly related to your paper, and you need to be very specific to convince the readers that your contribution is significant, then you should read it very carefully. If you need to get a general idea about the area, for a potential research, then you will need to read the most important (highly cited) and early work on that subject very carefully. You also need to read the most recent work, to be up-to-date on the subject. Your reading of the earliest, the most influential and the latest papers on the subject will lead to more papers to read, to guide your literature review and to improve your understanding of the state of the art in the area.

The librarian of your institution may help you find out which specialised literature databases / electronic journals are available to you. In addition, you can use Google Scholar to search for scientific articles: https://scholar.google.com. For example, this is a recent article (2020) I found as one of the first hits searching for "Large N fsQCA" (including the quotes): https://maggetti.org/wp-content/uploads/2020/06/Thomann-Maggetti-Designing-Research.pdf

While I know nothing of your particular field, the journal title (Journal of Social Research Methodology 19:445-459) seems promising if you look for information on the methodology - you may check on the impact factor of this journal to find out if it is a reputable journal in your field. Combine different search terms to focus on the subfield you are most interested in, follow the references cited in articles that seem relevant, search for more articles by the same main authors.

Due to the close Connection between the Chu constuction and the Caley-Dickinson construction, as I found in the question that the two notions are

linked.

maybe you find some small aspects in: Perry's chemical engineers handbook ISBN 0-07-049841-5

more is possible in "VDI Wärmeatlas":

S 2032

S52

S862

S1415

Why is rapid soil testing kits are not so popularly used in routine soil testing, let me put a counter question , just to put some discussion on the issue..??

I dont think so .Generally what I guise my Ph.Ds to do is write a bibliography at teh end of the docuemnt.You could but add foot notes.

The video mentioned above more explains how to use DOI. This one explains in a detailed manner how to edit reference styles and include the DOI in the bibliography:

I believe that a good abstract will be sufficient, unless otherwise reported.

The official rules for animal nomenclature are available at https://www.iczn.org/the-code/the-international-code-of-zoological-nomenclature/the-code-online/ This gives the rules for using names, not the systematic and phylogenetic question of which names are biologically useful. The Treatise on Invertebrate Paleontology volumes (http://paleo.ku.edu/treatise2/treatise.html) have some useful guidelines on taxonomy and taxonomic usage.

dear definitely many others apps there,but i suggest according user friendly convenience

Trying to get details

To the best of my knowledge, there is no consensus definition for MDR & XDR phenotypes in Salmonella.

Kindly take a quick look through these article. You may find some that fit your interests

This one (2018) proposed a criterion for definition of MDR & XDR phenotypes in S.Typhi.

https://doi.org/10.1128/mBio .00105-18.

Perhaps have a look at the website of https://www.theirm.org or Cosmo framework

Hi, dear Murad.,

Step 1: Open Mendeley and Word. Click the location of the paragraph to be referenced. Step 2: At the top of the Word "References" tab, click "Insert Citation." Step 3: A small window opened. Select the "Go to Mendeley" option. Step 4: Now in Mendeley software, select all the references you want (using the Ctrl button) Step 5: Click on "Cite" option (now you can see that, top of Mendeley software) Step 6: Finally, go to Word and change the "Style" to modern humanities research association 3rd or IEEE or Nature (or any Style that a journal or university wants from you).

@Neha Kapoor

Dear Angeliki Antona,

I studied the sources of the global financial crisis of 2008, including the issue of subprime bonds, which were used to raise funds from investors from which further mortgage loans were granted. With time, the quality of these loans was getting weaker, however, in order for the market to grow and the prices of securities on stock exchanges, these loans were still granted despite the fact that it was obvious that most of these loans would not be repaid on time. The credit policy has been liberalized too much. The rating agencies, despite the low quality of subsequent mortgages, continued to give the highest ratings to investment products in which subprime bonds sold to investors were wrapped. The majority of mortgage loans were insured by a few insurance companies. Central banks have kept interest rates on for too long, because the management of these banks followed the principles of economic liberalism in relation to financial markets. Financial supervision institutions did not notice in time the strong increase in credit and investment risk in the banking system, in which commercial and investment banks used the so-called large scale. "innovative" credit derivatives whose operation and risk valuation models were known to few people operating in the financial sector. Too mild, too liberalized lending policy has led to the fact that the above-mentioned mortgage loans were also granted to persons who did not have the required level of creditworthiness, people who did not have a permanent job, who had other loans outstanding, etc. And because the main form of collateral for these loans was credited real estate, when overvalued real estate appraisals started to fall suddenly and some borrowers stopped paying back loans, then a serious problem appeared in the financial system. When the risk valuation models at investment banks noticed the lack of necessary reserves to cover possible losses and began to unethically sell almost nothing worth junk securities for subsequent investors, many market participants noticed the beginning of the great financial crisis. A dozen or so hours later, one of the largest investment banks, with over 100 years of banking history, the bank Lehman Brothers declared bankruptcy and thus in mid-September 2008 began the largest global financial crisis in the history of economic development so far. I conduct research in this area. The conclusions of the research I published in scientific publications that are available on the Research Gate portal. These issues can be found in my publications, which have issues in the title regarding the global financial crisis and investment and central banking. I invite you to cooperation.

Greetings,

Dariusz Prokopowicz

I agree with Dr. Chipo Dyanda .

the internet services data bases are very powerful to obtain any information in the open arena. However, some sites are secure and permission may be obtained from editors and/or those who have published papers there. The academic community is so kind that members may even download some important works and send to you so that your work can be enriched when the publishers permit so.

Surendra Tryambakrao Kale - Changed in initial changes - based on strong recommendations due to good support group in zotero and open access.

(had problems with Mendely and was not able to get help.)

Hey Monia,

I had the same problem but the pther way around.

The answer under this post will show you how to edit the sorting:

If you are interested in papers on the topic of parental leave and challenges for fathers in the implementation of their caring activities with regard to gainful employment as well as family, partnership and parentship, I can recommend some of our English language papers. Although these have focused on the current German context, they also deal with the topic in relation to the international state of research, so that you can also get a good overview of current debates in this area.

Aunkofer, Stefanie; Meuser, Michael; Neumann, Benjamin (2018): Couples and Corporations: Negotiating Father’s Participation in Parental Leave in Germany. In: Revista Española de Sociología (RES) 27. S. 65–81 (Download: https://recyt.fecyt.es/index.php/res/article/download/66446/41189)

Neumann, Benjamin; Meuser, Michael (2017): Changing Fatherhood? The Significance of Parental Leave in Work Organizations and Couples. In: Liebig, Brigitte/Oechsle, Mechtild (Hrsg.): Fathers in Work Organisations. Inequalities and Capabilities, Rationalities and Politics. Barbara Budrich. S. 83-102. (Link: https://shop.budrich-academic.de/produkt/fathers-in-work-organizations/?v=3a52f3c22ed6)

About Fathers you could also look up the work of e.g. Andrea Doucet. But since the field of research in this area is so broad, it would help to specify what aspects of 'fathering' you're looking for.

Kind regards!

Conclusions are not things to answer research questions, but conclusions are narratives that explain the results and the discussion that is outlined in a concise and clear.

Moreover, you can check this link: https://www.easybib.com/guides/citation-guides/how-do-i-cite-a/personal-interview/

Here includes a download of the software. It is no longer in development, but according to a people a few years ago above, it was working then. https://support.clarivate.com/ScientificandAcademicResearch/s/article/HistCite-No-longer-in-active-development-or-officially-supported?language=en_US

You can use the program named Zotero, it's free to download it. You can choose the style of your bibliography APA, Mla or Chicago in order to normalize the standard at the end of every chapter.

let (n1, x1), (n2,x2),.....(n10,x10) be the sample size and average respectively, of sample 1, sample 2 ,..... sample 10.

you can calculate the grand mean as X =(n1*x1 + n2*x2 +....+ n10*x10)/(n1+ n2 +...+ n10)

similarly, if s1^2, s2^2,.....s10^2 be the variances of samples 1, 2,...10 respectively, you can calculate the Pooled Variance S^2= [(n1-1)*s1^2 + (n2-1)*s2^2 +.... +(n10 -1)*s10^2)] / [(n1 - 1) +(n2 - 1) +.....+(n10 - 1)]

squared root of pooled variance gives the Pooled Std. Deviation.

Dear sir,

Try to enter different key words sure you will get details

database iBonD 2.0

https://www.chemistryviews.org/details/ezine/10244491/The_Most_Efficient_Way_to_Find_pKa_Values.html

XAFS (EXAFS &XANES) makes no difference whether your sample is crystalline or amorphous.

You get the oxidation state via XANES and distances and coordination numbers via EXAFS.

For an introduction please have a look at:

https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwiSroyb0d7iAhXw0eAKHaZsAs4QFjAAegQIARAC&url=http%3A%2F%2Fwww.esrf.eu%2Ffiles%2Flive%2Fsites%2Fwww%2Ffiles%2Fevents%2Fconferences%2F2017%2FUser_Meeting_2017%2FPart%2520III.pdf&usg=AOvVaw1JP07Cee-q3MmA2Cd0wdgt

I found this in http://digitaldonne.tamu.edu/resources/robertsbib/Roberts1996.pdf

Donne, John. John Donne: 77 Wierszy, trans. and ed. Stanisław Barańczak. (Biblioteczka PoetÓw Jézyka Angielskiego, Vol. 16, gen. ed. Stanisław Barańczaka.) 2nd. ed. KrakÓw: Wydawn Znak. 224p. First ed., 1984.

Presents a general introduction to Donne’s life and poetry (5–[14]), followed by translations into Polish (with English texts on the opposite page) of 34 selections from the Songs and Sonets, 8 elegies, 10 epigrams, Sat3, Storm, Calm, Goodf, the Holy Sonnets, Christ, Sickness, and Father (16–197) with notes (200–13). Concludes with a selected bibliography (214–16), an alphabetical list of the English and Polish titles of poems (217–20), and a table of contents (221–[25]).

I see that the dynamic viscosity varies with temperature with the slowest manner when we compare with other solvents, i.e. the viscosity activation energy has the smaller value (i.e. feeble value).

It's hard to explain why one molecule of propiophenone necessitates a feeble activation energy to pass from one layer to the adjacent one in the shear phenomenon, i.e. the transition is more easy than other molecules?

Yasir - it does seem confusing. Vancouver is the main numerical format - and Chicago is not traditionally numerical. This journal may have 'adapted' Chicago to also incorporate numerical - through accident or design. The best thing to do is look at a recent volume copy article and just 'copy' that format.

As low a temperature as you can get

please Hicham Mechqoq watch following video , it is very useful :

There are many ways of performing EFA and CFA. You can expect identical factorization only if the methods used are identical. For example, if you get a 3 factor solution in EFA, you need to fit a 3 factor model also in CFA. CFA most often uses maximum likelihood estimation, whereas in EFA, principal component analysis is also common. Both methods may well produce different results.

As a reference, I recommend Brown, T. A. (2014). Confirmatory factor analysis for applied research.

\usepackage{natbib}

\usepackage{notoccite}

should help

Please have a look at the following RG links.

Jaspreet has summed it up very nicely!! The confusion comes from the fact that th two terms are often used interchangeably.

There are many scientific criticisms of scientific works, according to the approach used in the research, and the most famous curriculum in scientific research:

1- The historical approach: The critic examines the influences that influenced the scientific work, such as studying the surrounding environment, the social and cultural conditions, and the previous and contemporary events.

2 - The method of deductive or deductive: It connects the mind between the introductions and results, and between things and reasoning; on the basis of logic and mental reflection, it begins with the colleges;

3 - Inductive approach: It represents the opposite of the past; it begins with the particles, bringing them to the general laws. Experimental approach: It is the experiment that relies on the basis of research work, away from logical premises, historical conditions, or mental development

We must take care of these approaches in order to achieve accurate scientific criticism

My name is Vinay Singh and I am from India. I am working as a research scholar at the Department of Zoology, Kumaun University, Nainital, India. My research work on avian diversity and their conservation at Kumaun Himalayas India. I have no financial support for my Ph.D. work so I want to apply for a small grant of Ruffor foundation (UK) and for that they require an international referee. I have no contact with any international professor who works in the conservation field. Sir please can you help me with the same; I will be very thankful to you.

Guidelines of university, institute or promoter

An annotated bibliography is a list of referenced sources. Each list item is followed by a brief descriptive and evaluative paragraph - the annotation. The purpose of the annotation is to inform the reader of the relevance, accuracy, and quality of the sources cited.