Zheng Xia's research while affiliated with Central South University of Forestry and Technology and other places

Publications (7)

Article
Cement-bonded straw fiber board made from straw fiber and cement was prepared by semi-dry processing technology to investigate the effect of alkali treatment on the mechanical properties of the board. Results indicated that, board fabricated with 1% alkali solution treated fiber showed maximum improvement in mechanical properties. After alkali trea...
Article
The dynamic thermal mechanical properties of Bamboo fiber(BF)/Polylactic Acid(PLA) composites were studied by the thermal dynamic mechanical analyzer (DMA). The results showed that E' and tanδ were affected by mass fraction of BF and coupling agent. Because interfacial compatibility between BF and PLA was poor, the dynamic thermal mechanical proper...
Article
Binderless particleboard from kenaf core was prepared by steam-injection hot pressing technology and conventional hot pressing technology respectively, and temperature variations of mat core layer was tested by thermocouple during hot-pressing process, density profile of binderless particleboard was tested by isotopic density tester, the effect of...
Conference Paper
The "Wood Science" curriculum of our school is not only an important basic discipline for national key subject of wood science and technology, but it also is national course. In this article, it is described that the subject of wood science and technology take the construction of Wood Science national course as an opportunity to give full play to a...
Conference Paper
Teaching team building is an important part of academic development, in this article, the National Key Subject Construction of Wood Science and Engineering at the provincial level teaching team strategy from the four aspects of a professional team-building and the system of protection in operation, the training and importing of young teachers, maki...
Article
Wood-based composites is widely used in building and interior decoration field. However, it is easy for wood to get burnt, and abundant toxic smoke generating during the burning process has caused great casualties and property loss. In this study, poplar wood was chosen as test materials, and three fire-retardant were selected, i.e. the inorganic X...
Article
Bamboo wood especially the Phyllostachys pubescens is extremely abundant in our country, however, the high moisture content and easy to mildew and decay has limits it widely application in solid material. In this study, a novel carbonization with low temperature and non-smoke is introduced, and whole factor analysis method and variance analysis are...

Citations

... shows the example of composite with different type of plants. One of the methods to enhance adhesion between plant and polymer is chemical treatment such as sodium hydroxide (NaOH) or potassium permanganate (KMnO 4 ) [8] [9]. The chemical treatment will help to remove the lignin structure from the plant and increase the roughness of the surface and will simultaneously reduce the hydrophilic nature of plant [10]. ...
... Addressing such issues, it is high time to thinking about the alternative practice in the replacement of the conventional adhesive-based products for the end-users [5]. To eliminate these concerns, many researchers have been investigating the properties of binderless particleboard (BPB) made from agricultural residues such as kenaf core, oil palm, sugarcane bagasse, rice straw, almond, and coconut husks [6][7][8][9][10][11]. ...