January 2010
·
173 Reads
The presence of thermocouples in the lining of crucibles has become a general practice in the new construction of blast furnaces. The Nodal Wear Model (NWM) has also emerged as an instrument that, while using experimental data, obtains nodal variables whose experimental measurement is not possible: global coefficient of pig-iron/refractory heat transfer h pig−iron/lining g−i and nodal temperature T i . Starting from these nodal properties, the wear of the lining or the growth of scabs may be controlled, independently of the mechanisms responsible for them. In the same way, the properties and influence zone of the dead man in the hearth of the blast furnace may be calculated, along with those regions where the fluid is allowed to move without any other restrictions than the ones of the corresponding viscous flow (raceway hearth region). Obecność termopar w wyłożeniu garu wielkiego pieca, stało się powszechną praktyką w jego nowoczesnych konstrukcjach. Węzłowy Model Zużycia, staje się narzędziem, które korzystając z danych doświadczalnych, uzyskuje zmienne węzłowe, dla których pomiar bezpośredni jest niemożliwy: całkowity współczynnik przenikania ciepła między surówką, a wyłożeniem ogniotrwałym h surwka/wyoenie g−i oraz temperaturę węzłową T i . Począwszy od tych własności węzła, zużycie wyłożenia lub powiększanie się narostów, może być kontrolowane, niezależnie od mechanizmów odpowiedzialnych za ich zachodzenie. W ten sam sposób, mogą zostać wyliczone własności i wpływu martwego koksu w garze wielkiego pieca, wzdłuż obszarów, gdzie ciecz może poruszać się bez ograniczeń innych niż te odpowiadające przepływowi lepkiemu (strefa na poziomie dysz w garze pieca).