Mohamed Wael Hamad’s scientific contributions

Desalination is emerging as one of the most promising solutions to extraction and increasing global demand for drinking water. A water purification process called reverse osmosis (RO), in which dissolved solids are separated from solutions by partially permeable membranes. Advances in membrane technology have resulted in the removal of up to 99% of salts in seawater. However, the process and system of seawater treatment RO are associated with many problems, such as scaling and fouling of the membranes, corrosion of the pumps, valves and piping system due to the highly concentrated salt solution and high chemical consumption. Nowadays, these problems have become very critical as they severely affect the desalination process and also massively deteriorate the performance and lifetime of the system components and materials. To ensure that the desalination process is always the best option for a low-maintenance, highly efficient and cost-effective system and process, a comprehensive study of these problems is essential. Therefore, this article addresses the characteristics of metallic materials and corrosion problems in the reverse osmosis process of seawater desalination, as well as the best solutions to focus on and evaluate for an optimal seawater desalination process, and the selection of the category of duplex stainless steels suitable for seawater desalination plants to reduce maintenance, avoid plant shutdown and ensure plant safety.

In water processing industry, pressurised pipeline problems bring dangerous consequences, causing flooding, traffic accidents or death, financial and material losses and the disruption of the water supply. There are some problems in water pressurised pipelines system occur gradually, and some problems occur in very sudden without any warning with massive impacts and harms. Most of the sudden events that affect water system and municipal operation and maintenance centres are the phenomenon of sudden explosions and cracks in water pipes which lead to disaster. The phenomenon of water hammer is as a result of imperfect design or poor operation methods. The transition in the pressurised pipeline from one steady state to another steady state such as from a constant velocity to another velocity without a protection system make huge in pressure change. Any change in velocity leads to a pressure changes in very short time will cause to disaster strikes for the system stabilization. Professional design of liquid pipelines and proper selection of materials prevents the phenomenon of water hammer. Therefore, in this paper, the important issues on water hammer, protection systems and professional planning with special software programmes such as Allievi software was addressed.