Dirk Rabiger’s research while affiliated with Helmholtz-Zentrum Dresden-Rossendorf and other places

Convection of liquid metals drives large natural processes and is important in technical processes. Model experiments are conducted for research purposes where simulations are expensive and the clarification of open questions requires novel flow mapping methods with an increased spatial resolution. In this work, the method of Ultrasound Localization Microscopy (ULM) is investigated for this purpose. Known from microvasculature imaging, this method provides an increased spatial resolution beyond the diffraction limit. Its applicability in liquid metal flows is promising, however the realization and reliability is challenging, as artificial scattering particles or microbubbles cannot be utilized. To solve this issue an approach using nonlinear adaptive beamforming is proposed. This allowed the reliable tracking of particles of which super-resolved flow maps can be deduced. Furthermore, the application in fluid physics requires quantified results. Therefore, an uncertainty quantification model based on the spatial resolution, velocity gradient and measurement parameters is proposed, which allows to estimate the flow maps validity under experimental conditions. The proposed method is demonstrated in magnetohydrodynamic convection experiments. In some occasions, ULM was able to measure velocity vectors within the boundary layer of the flow, which will help for future in-depth flow studies. Furthermore, the proposed uncertainty model of ULM is of generic use in other applications.

Liquid metal convection plays an important role in natural and technical processes. In experimental studies, an instrumentation with a sub-millimeter spatial resolution is required in an opaque fluid to resolve the flow field near the boundary layer. Using ultrasound methods, the trade-off between the frequency and imaging depth of typical laboratory experiments limits the spatial resolution. Therefore, the method of ultrasound localization microscopy (ULM) was introduced in liquid metal experiments for the first time in this study. To isolate the intrinsic scattering particles, an adaptive nonlinear beamformer was applied. As a result, an average spatial resolution of 188 μm could be achieved, which corresponded to a fraction of the ultrasound wavelength of 0.28. A convection experiment was measured using ULM. Due to the increased spatial resolution, the high-velocity gradients and the recirculation areas of a liquid metal convection experiment could be observed for the first time. The presented technique paves the way for in-depth flow studies of convective turbulent liquid metal flows that are close to the boundary layer.