November 2019
·
227 Reads
·
47 Citations
Energy and Buildings
This page lists works of an author who doesn't have a ResearchGate profile or hasn't added the works to their profile yet. It is automatically generated from public (personal) data to further our legitimate goal of comprehensive and accurate scientific recordkeeping. If you are this author and want this page removed, please let us know.
November 2019
·
227 Reads
·
47 Citations
Energy and Buildings
July 2019
·
1,133 Reads
·
5 Citations
Renewable and Sustainable Energy Reviews
The numbers of high-rise buildings around the world increase rapidly. However, this fast pace is not in tandem with the expertise gained on how to design this building typology to best adjust it to local climates. In addition, the increased transparency of the building envelope from the mid-twentieth century onwards, resulted in high- energy loads, especially prominent in high-rise construction. With planning policies moving towards targets for low carbon built environments, this challenging typology needs further research and experimentation. This study focuses on the building envelope, as a passive design strategy towards reduced energy loads. Simulations of different envelope scenarios in the Mediterranean climate are conducted with EnergyPlus thermal simulation engine, and comparisons are made on energy loads in relation to height. Initial simulations between three single- skin envelope scenarios and a ventilated double skin façade (DSF) revealed the importance of lowering the high cooling loads relevant to the hot and humid climate, while external shading performed better from a double-skin envelope with LowE glazing as the interior layer. The focus then shifted on increasing the energy efficiency of the DSF, as a more advanced envelope option (controlled ventilation, acoustic insulation etc.), by drawing comparisons between four DSFs. Simulations showed that the most energy efficient DSF in the Mediterranean climate is with LowE glazing as the outside layer. In the final step, the comparison between the building en- velope with the proposed DSF and the one with external shading was in favour of the DSF option. Conclusions are drawn on the relationship of the building envelope with climate, with a preference on DSF towards a low carbon building design, while suggestions are made for further DSF research.
July 2019
·
87 Reads
·
32 Citations
Renewable and Sustainable Energy Reviews
The numbers of high-rise buildings around the world increase rapidly. However, this fast pace is not in tandem with the expertise gained on how to design this building typology to best adjust it to local climates. In addition, the increased transparency of the building envelope from the mid-twentieth century onwards, resulted in high-energy loads, especially prominent in high-rise construction. With planning policies moving towards targets for low carbon built environments, this challenging typology needs further research and experimentation. This study focuses on the building envelope, as a passive design strategy towards reduced energy loads. Simulations of different envelope scenarios in the Mediterranean climate are conducted with EnergyPlus thermal simulation engine, and comparisons are made on energy loads in relation to height. Initial simulations between three single-skin envelope scenarios and a ventilated double skin façade (DSF) revealed the importance of lowering the high cooling loads relevant to the hot and humid climate, while external shading performed better from a double-skin envelope with LowE glazing as the interior layer. The focus then shifted on increasing the energy efficiency of the DSF, as a more advanced envelope option (controlled ventilation, acoustic insulation etc.), by drawing comparisons between four DSFs. Simulations showed that the most energy efficient DSF in the Mediterranean climate is with LowE glazing as the outside layer. In the final step, the comparison between the building envelope with the proposed DSF and the one with external shading was in favour of the DSF option. Conclusions are drawn on the relationship of the building envelope with climate, with a preference on DSF towards a low carbon building design, while suggestions are made for further DSF research.
August 2017
·
129,585 Reads
·
45 Citations
Energy and Buildings
As of 2007 more than half of the world’s population is living in urban areas (a figure expected to rise to 60% by 2030). Thus, the liveability of the high-density city is gradually becoming a central point of focus and concern. A successful skyscraper model of urban planning could provide the possibility to increase city-space vertically as opposed to the current continuous expansion outward, which has obvious environmental consequences. However, skyscraper development, as well as all other new construction and gradually the older building stock, has to comply with current strict regulations on building energy efficiency. Contemporary high-rise examples do not present a sustainable solution to an increasing population or as models of prosperity, as they are linked to high-energy demand, environmental and social imbalances.
... All the case studies with the proposed SSF systems (Cases 3-7) always return positive values of both PES (~10.5% in all cases) and ΔCO2 (~2.0 tonCO2,eq in all cases) when compared to the reference case; this means that all the proposed materials used for refurbishment cases allow for the reduction of both primary energy consumption and carbon dioxide equivalent emissions for the current building status; these findings align with those previously reported in [20,21,28,33]. In particular, Figures 10-12, as well as Table 5, highlight the following: ...
November 2019
Energy and Buildings
... There are only a few existing research studies, which deal with the geometrical aspects of the building skin in high-rises [11,12]. Thus, further in-depth investigations are still needed on the envelope geometrical design factors, for instance, the perforation and morphological structure of the façade, which can make high-rise office buildings more energy efficient. ...
July 2019
Renewable and Sustainable Energy Reviews
... The examination of the function of high-rise structures in urban sustainability and energy consumption has been the subject of numerous studies. Saroglou et al. [29] emphasised the importance of constructing envelope designs in tall buildings, with a specific focus on the Mediterranean environment. They draw attention to the potential of double-skin façades (DSFs) in enhancing thermal efficiency. ...
July 2019
Renewable and Sustainable Energy Reviews
... Reasons for the need to obtain the analysis results of the PT slab from the complete threedimensional model can be found in some realistic scenarios as follows. One of these scenarios is the use of non-PT slabs within a HRBs with PT slabs due to high superimposed loads with uncertain distributions [7,9]. Also, using non-PT slabs at lower floors of a HRBs is often required when it is decided to adopt a PT system for upper floors after constructing of a number of non-PT lower floors, as reported by Khosa [6]. ...
August 2017
Energy and Buildings