Adjustment method for mechanical Boston Scientific Corporation 30 MHz intravascular ultrasound catheters connected to a Clearview console. Mechanical 30 MHz IVUS catheter adjustment

Erasmus MC Rotterdam, Rotterdam, Netherlands.
The International Journal of Cardiovascular Imaging (Impact Factor: 1.81). 05/2004; 20(2):83-91. DOI: 10.1023/B:CAIM.0000014046.63648.1c
Source: PubMed


Intracoronary ultrasound (ICUS) is often used in studies evaluating new interventional techniques. It is important that quantitative measurements performed with various ICUS imaging equipment and materials are comparable. During evaluation of quantitative coronary ultrasound (QCU) software, it appeared that Boston Scientific Corporation (BSC) 30 MHz catheters connected to a Clearview ultrasound console showed smaller dimensions of an in vitro phantom model than expected. In cooperation with the manufacturer the cause of this underestimation was determined, which is described in this paper, and the QCU software was extended with an adjustment. Evaluation was performed by performing in vitro measurements on a phantom model consisting of four highly accurate steel rings (perfect reflectors) with diameters of 2, 3, 4 and 5 mm. Relative differences (unadjusted) of the phantom were respectively: 15.92, 13.01, 10.10 and 12.23%. After applying the adjustment: -0.96, -1.84, -1.35 and -1.43%. In vivo measurements were performed on 24 randomly selected ICUS studies. These showed differences for not adjusted vs. adjusted measurements of lumen-, vessel- and plaque volumes of -10.1 +/- 1.5, -6.7 +/- 0.9 and -4.4 +/- 0.6%. An off-line adjustment formula was derived and applied on previous numerical QCU output data showing relative differences for lumen- and vessel volumes of 0.36 +/- 0.51 and 0.13 +/- 0.31%. 30 MHz BSC catheters connected to a Clearview ultrasound console underestimate vessel dimensions. This can retrospectively be adjusted within QCU software as well as retrospectively on numerical QCU data using a mathematical model.

Download full-text


Available from: Patrick W Serruys
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: Most acute coronary syndromes result from the rupture or erosion of high-risk plaques. Clinical imaging studies have shown that atherosclerotic plaque formation and rupture are widespread processes that are often asymptomatic. The rationale for atherosclerosis imaging is the in-vivo identification of high-risk lesions, which may subsequently lead to prevention of future cardiovascular events. Although intravascular ultrasound (IVUS) imaging studies demonstrated that echolucent appearance of the plaque and expansive (positive) remodelling are associated with unstable clinical presentation, these characteristics were not adequate for accurate plaque characterisation. Recent technical developments in ultrasound equipment and analytical methods, utilising several characteristics of the digitised ultrasound signal with radiofrequency analysis and elastography, promise accurate tissue characterisation. Other imaging modalities, including optical coherence tomography, also contribute to a more precise characterisation of the composition of atherosclerotic plaques. A non-imaging approach is the focal assessment of temperature differences using sensitive intravascular thermography catheters, presumably reflecting focal inflammatory changes of vulnerable lesions. Although the histological characteristics of the atheroma are critically important in the sequence of events leading to acute coronary syndromes, the clinical relevance of identifying these characteristics is not yet clear. There is increasing evidence that identifying and treating individual culprit lesions may not be enough to prevent the ischaemic cardiac events in most patients, because the acute coronary syndrome is not a disease of a single site or a few discrete segments, but rather a systemic disease that involves the entire coronary tree. In addition to detection and quantitation of early coronary atherosclerosis and disease activity, accurate and reproducible methods could help to identify high-risk patients and allow serial monitoring during various therapeutic interventions. Serial IVUS imaging makes it possible to visualise the vessel wall that harbours the atheroma at different time points. Typically, serial IVUS allows the assessment of the percentage change in atheroma volume, with considerable statistical power to detect small changes. Using this methodology, aggressive lipid lowering by a high-dose statin agent has been shown to stop the progression of atherosclerosis, and a new mutant high-density lipoprotein complex was found to be effective in regressing atheroma burden. Although intravascular ultrasound is very accurate for quantification of atheroma burden, widespread application and accurate and reproducible non-invasive imaging modalities are needed for large-scale risk assessment algorithms. Cardiovascular computed tomography is at the forefront of the non-invasive imaging modalities. Future prospective imaging studies will be necessary to identify focal or systemic characteristics of high-risk lesions and to demonstrate the relationship between plaque burden, biochemical markers and clinical events.
    Preview · Article · Feb 2004 · Drugs

  • No preview · Article · May 2004 · The International Journal of Cardiovascular Imaging
  • [Show abstract] [Hide abstract]
    ABSTRACT: Death or myocardial infarction, the most serious clinical consequences of atherosclerosis, often result from plaque rupture at non-flow limiting lesions. Current diagnostic imaging with coronary angiography only detects large plaques that already impinge on the lumen and cannot accurately identify those that have a propensity to cause unheralded events. Accurate evaluation of the composition or of the biomechanical characteristics of plaques with invasive or non-invasive methods, alone or in conjunction with assessment of circulating biomarkers, could help identify high-risk patients, thus providing the rationale for aggressive treatments in order to reduce future clinical events. The IBIS (Integrated Biomarker and Imaging Study) study is a prospective, single-center, non-randomized, observational study conducted in Rotterdam. The aim of the IBIS study is to evaluate both invasive (quantitative coronary angiography, intravascular ultrasound (IVUS) and palpography) and non-invasive (multislice spiral computed tomography) imaging techniques to characterize non-flow limiting coronary lesions. In addition, multiple classical and novel biomarkers will be measured and their levels correlated with the results of the different imaging techniques. A minimum of 85 patients up to a maximum of 120 patients will be included. This paper describes the study protocol and methodological solutions that have been devised for the purpose of comparisons among several imaging modalities. It outlines the analyses that will be performed to compare invasive and non-invasive imaging techniques in conjunction with multiple biomarkers to characterize non-flow limiting subclinical coronary lesions.
    No preview · Article · Sep 2005 · The International Journal of Cardiovascular Imaging
Show more