Structural Colors in Nature: The Role of Regularity and Irregularity in the Structure

Graduate School of Frontier Biosciences, Osaka University, Yamadaoka 1-3, Suita, Osaka 565-0871, Japan.
ChemPhysChem (Impact Factor: 3.42). 08/2005; 6(8):1442-59. DOI: 10.1002/cphc.200500007
Source: PubMed


Coloring in nature mostly comes from the inherent colors of materials, but it sometimes has a purely physical origin, such as diffraction or interference of light. The latter, called structural color or iridescence, has long been a problem of scientific interest. Recently, structural colors have attracted great interest because their applications have been rapidly progressing in many fields related to vision, such as the paint, automobile, cosmetics, and textile industries. As the research progresses, however, it has become clear that these colors are due to the presence of surprisingly minute microstructures, which are hardly attainable even by ultramodern nanotechnology. Fundamentally, most of the structural colors originate from basic optical processes represented by thin-film interference, multilayer interference, a diffraction grating effect, photonic crystals, light scattering, and so on. However, to enhance the perception of the eyes, natural creatures have produced various designs, in the course of evolution, to fulfill simultaneously high reflectivity in a specific wavelength range and the generation of diffusive light in a wide angular range. At a glance, these two characteristics seem to contradict each other in the usual optical sense, but these seemingly conflicting requirements are realized by combining appropriate amounts of regularity and irregularity of the structure. In this Review, we first explain the fundamental optical properties underlying the structural colors, and then survey these mysteries of nature from the viewpoint of regularity and irregularity of the structure. Finally, we propose a general principle of structural colors based on structural hierarchy and show their up-to-date applications.

Full-text preview

Available from:
    • "Nature has mastered the manipulation of light and color through organized nanoscale structures [1] [2]. There is currently high interest in developing materials that mimic these structures for their potential in several applications, including camouflage, fluid dynamics and impact resistance, sensors, optical devices, and tissue engineering scaffolds [3]. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Fringed periodic patterns have been produced by laser interference at 193 nm in an almost continuous 9.5 nm-thick Ag film that exhibits a number density of ≈189 μm(-2) holes. Patterns with four periods in the range of 1.8-10.2 μm were produced by changing the projection optics. At high fluences, the film breaks up into nanostructures around the regions exposed to intensity maxima due to laser-induced melting. At low fluences, a new process is observed that is triggered at the initial holes of the film by solid-state dewetting. Once the fluence is high enough to prevent the temperature balance across the pattern, mass transport from cold to hot regions is observed, leading to film densification in regions around intensity maxima sites. The novel patterns are thus formed by fringes of material that is more/less dense than the as-grown film, each of which is located at intensity maxima/minima sites, and have negligible topography. Comparing the present results to earlier reports in the literature shows that the thermal gradient across the pattern is influenced by the initial film microstructure, rather than by the thickness. The existence of a minimum period, which is achievable depending on the thermal continuity of the film, is also discussed.
    No preview · Article · Jun 2015 · Nanotechnology
  • Source
    • "When light is incident on a porous anodic alumina embedded Cu nanocomposite films, there be constructive interference from light reflected from the interface between the air and the PAA film layer, the interface between the PAA and the PAA/Cu layers , as well as from the interface between the PAA film and the aluminum substrate as shown in Fig. 6. This satisfies the Bragg–Snell formula [23] [24] [25], 2n A d A cos h A þ 2n B d B cos h B ¼ðm þ 1=2Þk ð1Þ where n A and n B are the effective refractive index of two layers where the PAA film is layer A and the porous anodic alumina embedded Cu nanocomposite film is layer B as shown in the Fig. 6, d A the PAA film thickness, d B the porous anodic alumina embedded Cu nanocomposite films thickness, h the refraction angle, m the order of interference, and k the wavelength outside the film, respectively. As n air < n 1 < n 2 > n Al , an additional half wavelength should be considered in Eq. (1).A th =0°, Eq. (1) can be written as 2n A d A þ 2n B d B ¼ðm þ 1=2Þk ð2Þ "
    [Show abstract] [Hide abstract]
    ABSTRACT: Porous anodic alumina embedded Cu with iridescent colors were fabricated in copper sulfate electrolyte. The films display highly saturated colors after being synthesized by an ac electrodeposition method. Tunable color in the films is obtained by adjusting anodization time, and can be adjusted across the entire visible range. Theoretical results of the changes in the structural color according to the Bragg–Snell formula are consistent with the experimental results. The films could be used in many areas including decoration, display and multifunctional anti-counterfeiting applications.
    Full-text · Article · Mar 2015 · Optical Materials
  • Source
    • "During the last decade, advancements in nanoscience and modern fabrication methods have enabled the detailed investigation and functional mimicry of these natural designs, especially with regards to the structural coloration effects found in biological systems345. The physical phenomena responsible for structural coloration have also received considerable attention67, as these structures derive their colors from a number of optical effects, such as interference, scattering, photonic crystal effects, or a combination thereof8. Photonic crystals in living systems are especially notable for their iridescence and exceptionally bright coloration9, which may assist in camouflage1011, communication12, sensing131415 and other purposes that still remain largely unexplored. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Biological systems serve as fundamental sources of inspiration for the development of artificially colored devices, and their investigation provides a great number of photonic design opportunities. While several successful biomimetic designs have been detailed in the literature, conventional fabrication techniques nonetheless remain inferior to their natural counterparts in complexity, ease of production and material economy. Here, we investigate the iridescent neck feathers of Anas platyrhynchos drakes, show that they feature an unusual arrangement of two-dimensional (2D) photonic crystals and further exhibit a superhydrophobic surface, and mimic this multifunctional structure using a nanostructure composite fabricated by a recently developed top-down iterative size reduction method, which avoids the above-mentioned fabrication challenges, provides macroscale control and enhances hydrophobicity through the surface structure. Our 2D solid core photonic crystal fibres strongly resemble drake neck plumage in structure and fully polymeric material composition, and can be produced in wide array of colors by minor alterations during the size reduction process.
    Full-text · Article · Apr 2014 · Scientific Reports
Show more