Peak capacity in gradient reversed-phase liquid chromatography of biopolymers. Theoretical and practical implications for the separation of oligonucleotides

Waters Corporation, 34 Maple Street, Milford, MA 01757, USA.
Journal of Chromatography A (Impact Factor: 4.17). 11/2007; 1169(1-2):139-50. DOI: 10.1016/j.chroma.2007.09.005
Source: PubMed


Reversed-phase ultra-performance liquid chromatography was used for biopolymer separations in isocratic and gradient mode. The gradient elution mode was employed to estimate the optimal mobile phase flow rate to obtain the best column efficiency and the peak capacity for three classes of analytes: peptides, oligonucleotides and proteins. The results indicate that the flow rate of the Van Deemter optimum for 2.1 mm I.D. columns packed with a porous 1.7 microm C18 sorbent is below 0.2 mL/min for our analytes. However, the maximum peak capacity is achieved at flow rates between 0.15 and 1.0 mL/min, depending on the molecular weight of the analyte. The isocratic separation mode was utilized to measure the dependence of the retention factor on the mobile phase composition. Constants derived from isocratic experiments were utilized in a mathematical model based on gradient theory. Column peak capacity was predicted as a function of flow rate, gradient slope and column length. Predicted peak capacity trends were compared to experimental results.

Download full-text


Available from: Martin Gilar
  • [Show abstract] [Hide abstract]
    ABSTRACT: Peak capacity is the commonly used measure of separation efficiency in gradient elution. This study focuses on the effect of column characteristics (particle size and column length) and operating parameters (gradient time and flow rate) on the peak capacity for small molecule compounds in gradient elution. The goal of this study is to develop a practical strategy to maximize the separation efficiency (i.e., peak capacity) under different constraints (analysis time or pressure limit). Using both experimental data and theoretical modeling, the current study reveals that the peak capacity increases with both gradient time and column length in a non-linear fashion. Marginal peak capacity is proposed to characterize the non-linear increase of peak capacity over the gradient time and column length. This study also attempts to understand the maximum peak capacity achievable under certain pressure limits using Neue’s peak capacity model. The results of this study provide a better understanding of the UPLC technology, and can also help to develop practical strategies to maximize the separation efficiency in gradient elution to meet the separation needs.
    No preview · Article · Oct 2009 · Chromatographia
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: The currently existing knowledge about peak capacity in unidimensional separations is reviewed. The majority of the paper is dedicated to reversed-phase gradient chromatography, covering specific techniques as well as the subject of peak compression. Other sections deal with peak capacity in isocratic chromatography, size-exclusion chromatography and ion-exchange chromatography. An important topic is the limitation of the separation power and the meaning of the concept of peak capacity for real applications.
    Preview · Article · Apr 2008 · Journal of Chromatography A
  • [Show abstract] [Hide abstract]
    ABSTRACT: The behavior of four similar liquid chromatography columns (2.1 mm i.d. ×30, 50, 100, and 150 mm, all packed with fine particles, average dp ≈ 1.7 μm, of bridged ethylsiloxane/silica hybrid-C18, named BEH-C18) was studied in wide ranges of temperature and pressure. The pressure and the temperature dependencies of the viscosity and the density of the eluent (pure acetonitrile) along the columns were also derived, using the column permeabilities and applying the Kozeny-Carman and the heat balance equations. The heat lost through the external surface area of the chromatographic column was directly derived from the wall temperature of the stainless steel tube measured with a precision of ± 0.2 °C in still air and ± 0.1 °C in the oven compartment. The variations of the density and viscosity of pure acetonitrile as a function of the temperature and pressure was derived from empirical correlations based on precise experimental data acquired between 298 and 373 K and at pressures up to 1.5 kbar. The measurements were made with the Acquity UPLC chromatograph that can deliver a maximum flow rate of 2 mL/min and apply a maximum column inlet pressure of 1038 bar. The average Kozeny-Carman permeability constant of the columns was 144 ± 3.5 %. The temperature hence the viscosity and the density profiles of the eluent along the column deviate significantly from linear behavior under high-pressure gradients. For a 1000 bar pressure drop, we measured Δ T = 25 - 30 K, (Δ η / η) ≃ 100 %, and (Δ ρ / ρ) ≃ 10 %. These results show that the radial temperature profiles are never fully developed within 1% for any of the columns, even under still-air conditions. This represents a practical advantage regarding the apparent column efficiency at high flow rates, since the impact of the differential analyte velocity between the column center and the column wall is not maximum. The interpretation of the peak profiles recorded in UPLC is discussed.
    No preview · Article · May 2008 · Journal of Chromatography A
Show more