Optimising implant anchorage (augmentation) during fixation of osteoporotic fractures: Is there a role for bone-graft substitutes?

Department of Orthopedics, Uppsala University, Uppsala S-751 85, Sweden.
Injury (Impact Factor: 2.14). 08/2011; 42 Suppl 2(Suppl 2):S72-6. DOI: 10.1016/j.injury.2011.06.019
Source: PubMed


When stabilising a fracture the contact between the screw and the surrounding bone is crucial for mechanical strength. Through development of screws with new thread designs, as well as optimisation of other properties, improved screw purchase has been gained. Other alternatives to improve screw fixation in osteoporotic bone, as well as normal bone if needed, includes the use of various coatings on the screw that will induce a bonding between the implant surface and the bone implant, as well as application of drugs such as bisphosphonates locally in the screw hole to induce improved screw anchorage through their anticatabolic effect on the bone tissue. As failure of internal fixation of fractures in osteoporotic bone typically occurs through breakage of the bone that surrounds the implant, rather than the implant itself, an alternative strategy in osteoporotic bone can include augmentation of the bone around the screw. This is useful when screws alone are being used for fixation, as it will increase pull-out resistance, but also when conventional plates and screws are used. In angularly stable plate-screw systems, screw back-out is not a problem if the locking mechanism between the screws and the plate works. However, augmentation that will strengthen the bone around the screws can also be useful in conjunction with angle-stable plate-screw systems, as the augmentation will provide valuable support when subjected to loading that might cause cut-out. For many years conventional bone cement, polymethylmethacrylate (PMMA), has been used for augmentation, but due to side effects--including great difficulties if removal becomes necessary--the use of PMMA has never gained wide acceptance. With the introduction of bone substitutes, such as calcium phosphate cement, it has been shown that augmentation around screws can be achieved without the drawbacks seen with PMMA. When dealing with fixation of fractures in osteoporotic bone where screw stability might be inadequate, it therefore seems an attractive option to include bone substitutes for augmentation around screws as part of the armamentarium. Clinical studies now are needed to determine the indications in which bone augmentation with bone-graft substitutes (BGSs) would merit clinical usage.

Download full-text


Available from: Philip Procter, Aug 29, 2014
  • [Show abstract] [Hide abstract]
    ABSTRACT: Osteoporosis presents a dilemma for the orthopedic surgeon. Screw fixation within the bone is crucial for mechanical stabilization, maintenance of reduction, and ultimately, fracture healing. For the patient, soft bones and physiological fragility usually benefit from immediate weight bearing and mobility to avoid further disuse osteoporosis, deconditioning, and immobility. For implant companies, traditional screws, plates, and nails function for simple fractures and compliant patients. Locked plating has improved screw purchase in osteoporotic bone and has expanded fracture fixation capabilities but is not the panacea for all fractures. For orthopedic surgeons, traditional surgical augmentation for osteoporosis consisting of dual plating, augmentation with polymethyl methacrylate, joint replacement, and now locked plating are beneficial. In order to advance orthopedic care in the expanding population of elderly osteoporotic patients, modern solutions utilizing the dual properties of secure fixation and relatively flexible implants are required. Endosteal substitution, extraosteal substitution, and combined nail/plate combinations are methods of utilizing traditional implants in a nontraditional way. Nonsurgical augmentation of fracture fixation is also paramount.
    No preview · Article · Oct 2012 · Current Osteoporosis Reports
  • [Show abstract] [Hide abstract]
    ABSTRACT: Ankle fractures are one of the most common injuries in the elderly and their incidence is anticipated to increase over the next 20 years. Appropriate management of ankle fractures in this population requires an understanding of the issues unique to the elderly. Osteoporosis must be considered when counseling patients about their ankle fracture. Good outcomes can be achieved with surgical fixation of ankle fractures in the elderly. Postoperative complications are higher in patients with diabetes and peripheral vascular disease, and in patients who smoke. This article reviews how to evaluate and treat ankle fractures in elderly patients with osteoporosis, evaluates the outcomes, and discusses surgical techniques.
    No preview · Article · Apr 2013 · Orthopedic Clinics of North America
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: The treatment of osteoporotic long bone fractures is difficult due to diminished bone density and compromised biomechanical integrity. The majority of osteoporotic long bone fractures occur in the metaphyseal region, which poses additional problems for surgical repair due to increased intramedullary volume. Treatment with internal fixation using intramedullary nails or plating is associated with poor clinical outcomes in this patient population. Subsequent fractures and complications such as screw pull-out necessitate additional interventions, prolonging recovery and increasing health care costs. The Photodynamic Bone Stabilization System (PBSS) is a minimally invasive surgical technique that allows clinicians to repair bone fractures using a light-curable polymer contained within an inflatable balloon catheter, offering a new treatment option for osteoporotic long bone fractures. The unique polymer compound and catheter application provides a customizable solution for long bone fractures that produces internal stability while maintaining bone length, rotational alignment, and postsurgical mobility. The PBSS has been utilized in a case series of 41 fractures in 33 patients suffering osteoporotic long bone fractures. The initial results indicate that the use of the light-cured polymeric rod for this patient population provides excellent fixation and stability in compromised bone, with a superior complication profile. This paper describes the clinical uses, procedural details, indications for use, and the initial clinical findings of the PBSS.
    Full-text · Article · Dec 2014 · Medical Devices: Evidence and Research
Show more