Microfluidic fluorescence in situ hybridization and flow cytometry (µFlowFISH). Lab Chip

Biotechnology and Bioengineering Department, Sandia National Laboratories, PO Box 969, MS 9291, Livermore, CA 94550, USA.
Lab on a Chip (Impact Factor: 6.12). 08/2011; 11(16):2673-9. DOI: 10.1039/c1lc20151d
Source: PubMed


We describe an integrated microfluidic device (μFlowFISH) capable of performing 16S rRNA fluorescence in situ hybridization (FISH) followed by flow cytometric detection for identifying bacteria in natural microbial communities. The device was used for detection of species involved in bioremediation of Cr(vi) and other metals in groundwater samples from a highly-contaminated environmental site (Hanford, WA, USA). The μFlowFISH seamlessly integrates two components: a hybridization chamber formed between two photopolymerized membranes, where cells and probes are electrophoretically loaded, incubated and washed, and a downstream cross structure for electrokinetically focusing cells into a single-file flow for flow cytometry analysis. The device is capable of analyzing a wide variety of bacteria including aerobic, facultative and anaerobic bacteria and was initially tested and validated using cultured microbes, including Escherichia coli, as well as two strains isolated from Hanford site: Desulfovibrio vulgaris strain RCH1, and Pseudomonas sp.strain RCH2 that are involved in Cr(vi) reduction and immobilization. Combined labeling and detection efficiencies of 74-97% were observed in experiments with simple mixtures of cultured cells, confirming specific labeling. Results obtained were in excellent agreement with those obtained by conventional flow cytometry confirming the accuracy of μFlowFISH. Finally, the device was used for analyzing water samples collected on different dates from the Hanford site. We were able to monitor the numbers of Pseudomonas sp. with only 100-200 cells loaded into the microchip. The μFlowFISH approach provides an automated platform for quantitative detection of microbial cells from complex samples, and is ideally suited for analysis of precious samples with low cell numbers such as those found at extreme environmental niches, bioremediation sites, and the human microbiome.

Download full-text


Available from: Romy Chakraborty
  • Source
    • "In fact, most microorganisms are recalcitrant to laboratory cultivation and it is estimated that 95–99 % of known microbial species cannot be isolated in the laboratory (and instead are identified by novel 16SrDNA sequences obtained from environmental samples; Amann et al. 1995; Hugenholtz et al. 1998; Whitman et al. 1998). Though recent advances in cultivation techniques have helped overcome some of these limitations, including single cell flow cytometry (Zengler et al. 2002; Müller and Nebe-von-Caron 2010), microfluidic culture coupled with FISH and flow cytometry (Liu et al. 2011), and the use of complex media and simulated environmental niches (Stevenson et al. 2004; Delavat et al. 2012), at present molecular methods appear more capable at detecting rare and specialized taxa than conventional cultivation-based approaches. Thus the use of culturedependent assays in environmental assessment is limited and will not be discussed in detail in this review; interested readers are referred to Stewart Rev Environ Sci Biotechnol (2012) for a review of recent advances in cultivation techniques targeting 'unculturable' microorganisms. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Biological diagnostic tools are becoming an increasingly important aspect of geoenvironmental problems. Modern geoenvironmental professionals must be able to both understand and exploit biological processes for a variety of applications, ranging from contaminant biodegradation and removal to evaluation and monitoring of environmental quality in and around landfills and landfill cover systems. Advancements in genetics and environmental measurement have yielded a wealth of sophisticated tools to evaluate biological processes in soils, sediments and groundwater. Successful use of these tools requires a keen understanding of the limitations and advantages offered by each. This paper provides an overview of the currently available biological diagnostic tools with an emphasis on their application in geoenvironmental engineering. Limitations and unresolved challenges in successful applications of these tools are also discussed.
    Full-text · Article · Jun 2015 · Reviews in Environmental Science and Bio/Technology
  • Source
    • "Microfluidic devices have attracted significant attention in single cell analysis [19]–[21]. Leveraging our group’s previous work in developing microfluidic single cell analysis systems including microfluidic bacterial rRNA flow-FISH [22] and cell signaling pathway profiling [23], we report on a novel 10-chamber microfluidic chip platform for multiplexed detection of miRNA and proteins in single cells under 10 different experimental conditions simultaneously. The approach relies on a novel flow-cytometry approach using LNA fluorescent in situ hybridization followed by rolling-circle amplification for miRNA detection. "
    [Show abstract] [Hide abstract]
    ABSTRACT: MicroRNAs (miRNAs) are non-coding small RNAs that have cell type and cell context-dependent expression and function. To study miRNAs at single-cell resolution, we have developed a novel microfluidic approach, where flow fluorescent in situ hybridization (flow-FISH) using locked-nucleic acid probes is combined with rolling circle amplification to detect the presence and localization of miRNA. Furthermore, our flow cytometry approach allows analysis of gene-products potentially targeted by miRNA together with the miRNA in the same cells. We demonstrate simultaneous measurement of miR155 and CD69 in 12-O-tetradecanoylphorbol 13-acetate (PMA) and Ionomycin stimulated Jurkat cells. The flow-FISH method can be completed in ∼10 h, utilizes only 170 nL of reagent per experimental condition, and is the first to directly detect miRNA in single cells using flow cytometry.
    Full-text · Article · Jan 2013 · PLoS ONE
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: Novel applications of micro total analysis systems (μTAS) are addressing fundamental biological questions, fabricating new biomedical reagents, and developing cell and biochemical assays. These efforts impact progress in all areas of μTAS from materials to fluidic handling as well as detection and external control systems. Three areas show the greatest current and potential impact on the biomedical sciences: improvements in device fabrication and operation, development of enabling technologies, and advancements at the interface with biology (Figure 1). The range of materials from which devices can be fabricated has expanded considerably and now includes paper, fabric and thread, and a multitude of polymers as well as more conventional materials. Thus device substrates and component materials suitable for nearly all biological applications are readily available. Devices are also becoming increasingly integrated with advancements in sampling handling and preparation, a key and first step in any biological analysis. Another growing area focuses on modular components that can be mixed and matched on-demand and applied to many different assays, so-called programmable microfluidics. This development should enhance the rate at which new bioassays are generated as well as customize existing experimental protocols. A second area of rapid advancement has been the development new technologies that enable assays that cannot be efficiently performed by any method except μTAS. Novel analyses of single cells are enabled due to effective manipulation of picoliter-scale volumes. Synthesis and screening of large-scale libraries has become increasingly feasible due to the fast processing speeds and combinatorial mixing of reagents provided by lab-on-chip systems. Increased automation within a completely contained system has now begun to provide some of the first true μTAS diagnostic devices for clinical medicine. The third area in which μTAS has begun to yield high dividends is the interfacing of living entities with microdevices to create biological communities including tissues and organs on-chip. Control of cell placement in multiple dimensions has produced biological systems midway between the conventional tissue-culture dish and an intact animal. Thus the complexities of living constructs can be recreated in a controlled experimental environment permitting groundbreaking biological questions to be addressed. Application of μTAS in all of these areas continues to be highly interdisciplinary, utilizing techniques and strategies from almost every scientific field. This multidisciplinary focus insures continued relevance to the biological community as well as a bright future.
    Full-text · Article · Oct 2011 · Analytical Chemistry
Show more