Grains and grain boundaries in single-layer graphene atomic patchwork quilts. Nature 469:389

School of Applied and Engineering Physics, Cornell University, Ithaca, New York 14853, USA.
Nature (Impact Factor: 41.46). 01/2011; 469(7330):389-92. DOI: 10.1038/nature09718
Source: PubMed


The properties of polycrystalline materials are often dominated by the size of their grains and by the atomic structure of their grain boundaries. These effects should be especially pronounced in two-dimensional materials, where even a line defect can divide and disrupt a crystal. These issues take on practical significance in graphene, which is a hexagonal, two-dimensional crystal of carbon atoms. Single-atom-thick graphene sheets can now be produced by chemical vapour deposition on scales of up to metres, making their polycrystallinity almost unavoidable. Theoretically, graphene grain boundaries are predicted to have distinct electronic, magnetic, chemical and mechanical properties that strongly depend on their atomic arrangement. Yet because of the five-order-of-magnitude size difference between grains and the atoms at grain boundaries, few experiments have fully explored the graphene grain structure. Here we use a combination of old and new transmission electron microscopy techniques to bridge these length scales. Using atomic-resolution imaging, we determine the location and identity of every atom at a grain boundary and find that different grains stitch together predominantly through pentagon-heptagon pairs. Rather than individually imaging the several billion atoms in each grain, we use diffraction-filtered imaging to rapidly map the location, orientation and shape of several hundred grains and boundaries, where only a handful have been previously reported. The resulting images reveal an unexpectedly small and intricate patchwork of grains connected by tilt boundaries. By correlating grain imaging with scanning probe and transport measurements, we show that these grain boundaries severely weaken the mechanical strength of graphene membranes but do not as drastically alter their electrical properties. These techniques open a new window for studies on the structure, properties and control of grains and grain boundaries in graphene and other two-dimensional materials.

Download full-text


Available from: Paul Mceuen
  • Source
    • "Isotope engineering directly affects the phonon mean free path (MFP) through phonon massdifference scattering, but only a reduction in thermal conductivity by a factor of 2 is available [21] [22]. Besides, researchers have also investigated the impacts from edge passivation [4] [21], asymmetric geometry shape [23], strain [24] and grain-boundaries [25] [26] on graphene. However, for applications where cheaper and more stable graphene sheet with tunable thermal properties in a broader range is needed, a simpler and more effective fabrication method is still highly desired. "

    Full-text · Article · Jan 2016 · Carbon
  • Source
    • "Graphite, a precursor to produce graphene by exfoliation, has GBs with pentagoneheptagon line defects, so that they can change the geometrical chirality to form zigzag-and armchair-edge coexisting structures, which was proposed first by Terrones et al. [17] and observed experimentally later by scanning tunneling microscopy(STM ) in highly ordered pyrolytic graphite (HOPG) [18] [19]. So far, universal existence of GBs in graphene have also been confirmed in the transmission electron microscopy (TEM) and optical microscopy measurements [20] [21]. Recently, Lahiri, et al. [22] reported that structurally well-defined one-dimensional topological defect could be controllably introduced in epitaxial graphene, and found that such defects would yield a pronounced perturbation into the electronic structure. "
    [Show abstract] [Hide abstract]
    ABSTRACT: The polycrystalline structures for graphene are practically unavoidable by the currently existing growth routes, thus the scattering issue of electrons by grain boundary (GBs) becomes a theoretical and an experimental relevant one. Here, magnetic transport properties of the polycrystalline graphene nanoribbons (PGNRs) with a zigzag–armchair–zigzag structure are investigated systematically. It shows that GBs can induce significant localized electron states and magnetic ordering in the region consisting of GBs and armchair segment, and the interdomain electronic transmission across the GBs is transparent or blocked completely depending on the spin direction (α or β) of electrons as well as the microscopic details and relative orientation of GBs, which causes a special spin polarization for the magnetic transport. Especially, the perfect spin-filtering, spin-rectifying, and giant magnetoresistance effects can be realized simultaneously in such heterojunctions. These novel features can be rationalized by the spin splitting of molecular levels as well as the delocalization degree and parity limitation of molecular orbital wave functions in the scattering region serving as an extended molecule. Also shown is that PGNR-based heterojunctions possess a large range of magnetic behaviors with variation of its geometrical size.
    Full-text · Article · Nov 2015 · Carbon
  • Source
    • "Transmission electron microscopy (TEM) analysis can provide significant information of the nitrogen dopant and other structures of graphene lattice [16]. Dark-field TEM (DF-TEM) and aberration-corrected annular dark-field scanning TEM (ADF- STEM) has been used to identify grain size and grain boundaries of CVD synthesized graphene in atomic scale [35]. These techniques provide insight of CVD synthesized graphene at atomic level to determine the induced defect structures. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Doping of a foreign element in sp2 hybridized graphene lattice is of significant importance to tune the electrical and chemical properties. Here, we report on the grain structures of substitutional nitrogen-doped graphene synthesized by an atmospheric pressure (AP) solid source-based chemical vapor deposition (CVD) technique. Nitrogen-doped graphene was synthesized by mixing solid camphor and melamine as carbon and nitrogen source, respectively. The precursor materials quantity significantly affects the graphene growth on Cu foil and thereby the nitrogen doping and content. Transmission electron microscopy (TEM) analysis was performed to determine the nitrogen substitutional sites in the graphene. Dark-field (DF) TEM analysis was carried out to evaluate the graphene grain structure grown with introduction of nitrogen dopant. We obtained different grain orientations, where an individual grain size is more than 5 μm. Our findings show that graphitic nitrogen defects can be introduced in the large individual graphene grain by the developed solid source-based CVD technique.
    Full-text · Article · Sep 2015 · Carbon
Show more