Thermodynamic study of (anthracene + benzo[a]pyrene) solid mixtures

Brown University Division of Engineering, 182 Hope Street Box D, Providence, RI USA 02912, 401-863-2775 (p) 401-863-9120 (f).
The Journal of Chemical Thermodynamics (Impact Factor: 2.68). 11/2010; 42(11):1356-1360. DOI: 10.1016/j.jct.2010.05.019
Source: PubMed


To characterize better the thermodynamic behavior of a binary polycyclic aromatic hydrocarbon mixture, thermochemical and vapor pressure experiments were used to examine the phase behavior of the {anthracene (1) + benzo[a]pyrene (2)} system. A solid-liquid phase diagram was mapped for the mixture. A eutectic point occurs at x(1) = 0.26. The eutectic mixture is an amorphous solid that lacks organized crystal structure and melts between T = (414 and 420) K. For mixtures that contain 0.10 < x(1) < 0.90, the enthalpy of fusion is dominated by that of the eutectic. Solid-vapor equilibrium studies show that mixtures of anthracene and benzo[a]pyrene at x(1) < 0.10 sublime at the vapor pressure of pure benzo[a]pyrene. These results suggest that the solid-vapor equilibrium of benzo[a]pyrene is not significantly influenced by moderate levels of anthracene in the crystal structure.

Download full-text


Available from: Eric M. Suuberg
  • [Show abstract] [Hide abstract]
    ABSTRACT: Solid–liquid phase equilibrium data of three binary organic systems, namely, 3-hydroxybenzaldehyde (HB)—4-bromo-2-nitroanilne (BNA), benzoin (BN)—resorcinol (RC) and urea (U)—1,3-dinitrobenzene (DNB), were studied by the thaw–melt method. While the former two systems show the formation of simple eutectic, the third system shows the formation of a monotectic and a eutectic with a large immiscibility region where two immiscible liquid phases are in equilibrium with a liquid of single phase. Growth kinetics of the pure components, the monotectic and the eutectics, studied by measuring the rate of movement (v) of solid–liquid interface in a thin U-tube at different undercoolings (ΔT) suggests the applicability of the Hillig–Turnbull’s equation: v = u (ΔT)n , where v and n are the constants depending on the nature of the materials involved. The thermal properties of materials such as heat of mixing, entropy of fusion, roughness parameter, interfacial energy, and excess thermodynamic functions were computed from the enthalpy of fusion values, determined by differential scanning calorimeter (Mettler DSC-4000) system. The role of solid–liquid interfacial energy on morphologic change of monotectic growth has also been discussed. The microstructures of monotectic and eutectics were taken which showed lamellar and federal features.
    No preview · Article · Jan 2012 · Journal of Thermal Analysis and Calorimetry
  • [Show abstract] [Hide abstract]
    ABSTRACT: The solid–liquid phase equilibrium data of two binary organic systems, namely, urea (U)–3-aminophenol (AP) and 3-hydroxybenzaldehyde (HB)–β-napthaol (BN) show formation of a eutectic in each case. The enthalpies of fusion of the pure components and binary eutectics have been determined using differential scanning calorimeter (Mettler DSC-4000) system. The thermal properties of the materials such as heat of mixing, entropy of fusion, roughness parameter, interfacial energy and excess thermodynamic functions were computed using the enthalpy of fusion values. The microstructures of eutectics were developed using unidirectional thermal gradient and interested region were photographed. KeywordsPhase diagram–Thermal properties–Organic eutectic–Microstructure
    No preview · Article · Jan 2011 · Journal of Thermal Analysis and Calorimetry
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: This study explores the solid/liquid phase behavior of mixtures of polycyclic aromatic hydrocarbons (PAHs), exploring the transition from non-ideal solid mixtures to a relatively ideal liquid behavior characteristic of "tars". PAH mixtures have been studied using differential scanning calorimetry, melting point analysis and Knudsen effusion. Mixtures of anthracene, pyrene and fluoranthene show behavior that is consistent with other binary PAH mixtures; that is, the initially solid mixture exhibits a significant melting point depression, relative to the pure components, and in a certain range of composition, solid azeotrope behavior on vaporization. As the number of distinct PAH species is increased (by adding in benzo[a]pyrene, phenanthrene, fluorene and chrysene) this behavior gradually gives way to liquid phase character at even room temperature, and the vaporization behavior approaches that crudely predictable from ideal mixture theory.
    Full-text · Article · Mar 2011 · Industrial & Engineering Chemistry Research
Show more