Activación alcalina de cenizas volantes. Relación entre el desarrollo mecánico resistente y la composición química de la ceniza

Materiales de Construcción (Impact Factor: 0.96). 09/2008; 58(291). DOI: 10.3989/mc.2008.v58.i291.101
Source: OAI


18 pages, 6 figures, 2 tables. [ES] Las cenizas volantes activadas alcalinamente constituyen la base de una nueva generación de cementos con muy interesantes propiedades mecánicas, adherentes y durables (a veces incluso mejores que las de los cementos Portland tradicionales). Adicionalmente el desarrollo de estos cementos podría contribuir a mitigar las emisiones de CO2 a la atmósfera, ya que el material base de los mismos puede estar formado por subproductos industriales. En la presente investigación se realizó un estudio para determinar la influencia de la composición de los materiales iniciales (ratios SiO2/Al2O3 y Na2O/Al2O3) en las propiedades mecánicas y en la naturaleza y composición de los productos de reacción. Los resultados obtenidos indican que no existe una relación lineal de dichas ratios con las resistencias mecánicas, sino que existen unos valores óptimos, por encima y debajo de los cuales las resistencias mecánicas disminuyen. En el caso concreto de las ratios estudiadas en el presente trabajo estos valores serian: SiO2/Al2O3= 4,0 y Na2O/Al2O3= 1,0 (relaciones molares) [EN] Alkali-activated fly ash is the primary component of a new generation of high-strength, durable binders with excellent mechanical properties and durability (on occasion bettering traditional Portland cement performance). Moreover, development of these cements may contribute to mitigating CO2 emissions, since the base material is an industrial by-product. The present study was conducted to determine the effect of the composition of the initial materials (SiO2/Al2O3 and Na2O/Al2O3 ratios) on the mechanical properties, nature and composition of the reaction products. The results obtained indicate that there is no linear relationship between these ratios and mechanical strength, but rather a series of optimal values above and below which strength declines. In the specific case of the ratios studied in the present paper, these values were: SiO2/Al2O3= 4.0 and Na2O/Al2O3= 1.0 (molar ratios). Proyecto BIA2006- 28530-E; y contrato I3P-PC2004L co-financiado por la Unión europea. Peer reviewed

Download full-text


Available from: Ana Fernández-Jiménez, Oct 02, 2015
  • [Show abstract] [Hide abstract]
    ABSTRACT: In the pursuit of new sources of aluminosilicates for alkaline cement manufacture, the present paper reports on the compositional and mineralogical assessment of the reactive potential of several types of bentonites. A number of factors affect strength development in these materials, in particular their potentially reactive silica and aluminium content. While bentonites normally have a high SiO2 content, the amount of reactive Al2O3 present is not always sufficient for the purpose at hand. The present study consequently also explored the effect of adding aluminium correctors (commercial sodium aluminate and bauxite) to the mix. The findings showed that de-hydroxylated bentonite reacted with an alkaline activator, yielding materials with cementitious properties. The addition of 10 % sodium aluminate raised mechanical strength, which was unaffected by the inclusion of bauxite. The primary reaction product was consistently found to be a (N,C)-A-S-H gel, with zeolites as the secondary products.
    No preview · Article · Mar 2014 · Materials and Structures
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: The alkali activation of aluminosilicates is a procedure for obtaining new binders with many of the same properties as traditional portland cement. The type and characteristics of the products formed, however, and consequently their mechanical performance, are conditioned by a number of parameters. The present study explored the potential reactivity of synthetic alkaline silicoaluminates alkali-activated at high temperatures by analysing parameters such as the chemical composition of the starting material and the vitreous phase content. When alkali-activated, the glass produced in the laboratory developed high mechanical strength, while the performance of the resulting binders was conditioned by the SiO2/Al2O3 ratio in the starting materials. The optimal values were observed to lie between 3 and 4.
    Full-text · Article · May 2014 · Ceramics International
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: This article presents the synthesis of a geopolymeric material based on a Colombian fly ash (FA). Geopolymers with different total molar SiO2/Al2O3 and Na2O/SiO2 ratios and the inclusion of two source of calcium (a national granulated blast furnace slag and ordinary Portland cement) were evaluated. The reaction kinetic of FA alkali activation was monitored by isothermal calorimetry, which shows the systems with highest alkalinity exhibit higher release of heat and higher dissolution degree of FA. Replacing a percentage of FA by a calcium source (OPC or GBFS) modifies the kinetic and reaction products. A higher SiO2/ Al2O3 molar ratio leads to the production of materials with higher compressive strength up to ~ 77 %. Overall, the addition of a calcium source contributes significantly to the acquisition of a higher mechanical performance. The results show the potential use of this FA with unprofitable physical and chemical characteristics as a raw material to produce non-conventional cementitious with compressive strength up to 50 MPa at 28 days of curing time.
    Full-text · Article · Jul 2014
Show more