No full-text available
To read the full-text of this research,
you can request a copy directly from the authors.
Optimizing Energy-Efficient Non-Terrestrial Networks with HAPs and UAVs for Enhanced Connectivity in Rural and Disaster-Affected Areas
ResearchGate has not been able to resolve any citations for this publication.
Quick response to disasters is crucial for saving lives and reducing loss. This requires low-latency uploading of situation information to the remote command center. Since terrestrial infrastructures are often damaged in disaster areas, non-terrestrial networks (NTNs) are preferable to provide network coverage, and mobile edge computing (MEC) could be integrated to improve the latency performance. Nevertheless, the communications and computing in MEC-enabled NTNs are strongly coupled, which complicates the system design. In this paper, an edge information hub (EIH) that incorporates communication, computing and storage capabilities is proposed to synergize communication and computing and enable systematic design. We first address the joint data scheduling and resource orchestration problem to minimize the latency for uploading sensing data. The problem is solved using an optimal resource orchestration algorithm. On that basis, we propose the principles for resource configuration of the EIH considering payload constraints on size, weight and energy supply. Simulation results demonstrate the superiority of our proposed scheme in reducing the overall upload latency, thus enabling quick emergency rescue.
Located in the stratospheric layer of Earth’s atmosphere, high altitude platform station (HAPS) is a promising network infrastructure, which can bring significant advantages to sixth-generation (6G) and beyond wireless communications systems by forming vertical heterogeneous networks (vHetNets). However, if not dealt with properly, integrated networks suffer from several performance challenges compared to standalone networks. In harmonized spectrum integrated networks, where different tiers share the same frequency spectrum, interference is an important challenge to be addressed. This work focuses on an integrated HAPS-terrestrial network, serving users in an overlapped urban geographic area, and formulates a fairness optimization problem, aiming to maximize the minimum spectral efficiency (SE) of the network. Due to the highly nonconvex nature of the formulated problem, we develop a rapid converging iterative algorithm that designs the multiple-input multiple-output (MIMO) beamforming weights and the user association scheme such that the propagated inter- and intra-tier interference is managed. Simulation results demonstrate the proposed algorithm’s superiority over standalone terrestrial networks and scenario where only the beamforming weights are optimized.
As the fifth-generation (5G) mobile communication network may not meet the requirements of emerging technologies and applications, including ubiquitous coverage, industrial internet of things (IIoT), ubiquitous artificial intelligence (AI), digital twins (DT), etc., this paper aims to explore a novel space-air-ground integrated network (SAGIN) architecture to support these new requirements for the sixth-generation (6G) mobile communication network in a flexible, low-latency and efficient manner. Specifically , we first review the evolution of the mobile communication network, followed by the application and technology requirements of 6G. Then the current 5G non-terrestrial network (NTN) architecture in supporting the new requirements is deeply analyzed. After that, we proposes a new flexible, low-latency and flat SAGIN architecture, and presents corresponding use cases. Finally, the future research directions are discussed .
Mobile edge computing (MEC) is a promising approach that can reduce the latency of task processing by offloading tasks from user equipments (UEs) to MEC servers. Existing works always assume that the MEC server is capable of executing the offloaded tasks, without considering the impact of improper load on task processing efficiency. In this paper, we present a two-stage computing offloading scheme to minimize the task processing delay while managing the server load properly. To minimize the task processing delay, each UE optimizes how much workload to be offloaded to the MEC server. To improve the task processing efficiency of the server, we arrange the processing order of offloading tasks by introducing an aggregative game with an instantaneous load billing mechanism. The proposed game can obtain the optimal task offloading and processing strategy with limited information and a small number of iterations. Simulation results show that our scheme approaches the optimal offloading strategy in terms of minimizing task processing delay for each UE and improving processing efficiency for the server.
In recent years, unmanned aerial vehicles (UAVs) have received considerable attention from regulators, industry and research community, due to rapid growth in a broad range of applications. Particularly, UAVs are being used to provide a promising solution to reliable and cost-effective wireless communications from the sky. The deployment of UAVs has been regarded as an alternative complement of existing cellular systems, to achieve higher transmission efficiency with enhanced coverage and capacity. However, heavily utilized microwave spectrum bands below 6 GHz utilized by legacy wireless systems are insufficient to attain remarkable data rate enhancement for numerous emerging applications. To resolve the spectrum crunch crisis and satisfy the requirements of 5G and beyond mobile communications, one potential solution is to use the abundance of unoccupied bandwidth available at millimeter wave (mmWave) frequencies. Inspired by the technique potentials, mmWave communications have also paved the way into the widespread use of UAVs to assist wireless networks for future 5G and beyond wireless applications. In this paper, we provide a comprehensive survey on current achievements in the integration of 5G mmWave communications into UAV-assisted wireless networks. More precisely, a taxonomy to classify the existing research issues is presented, by considering seven cuttingedge solutions. Subsequently, we provide a brief overview of 5G mmWave communications for UAV-assisted wireless networks from two aspects, i.e., key technical advantages and challenges as well as potential applications. Based on the proposed taxonomy, we further discuss in detail the state-of-the-art issues, solutions, and open challenges for this newly emerging area. Lastly, we complete this survey by pointing out open issues and shedding new light on future directions for further research on this area.
High altitude platform station (HAPS), which is deployed in the stratosphere at an altitude of 20-50 kilometres, has attracted much attention in recent years due to their large footprint, line-ofsight links, and fixed position relative to the Earth. Compared with existing network infrastructure, HAPS has a much larger coverage area than terrestrial base stations and is much closer than satellites to the ground users. Besides small-cells and macro- cells, a HAPS can offer one mega-cell, which can complement legacy networks in 6G and beyond wireless systems. This article explores potential use cases and discusses relevant open challenges of integrating HAPS into legacy networks, while also suggesting some solutions to these challenges. The cumulative density functions of spectral efficiency of the integrated network and cell-edge users are studied and compared with terrestrial networks. The results show the capacity gains achieved by the integrated network are beneficial to cell-edge users. Furthermore, the advantages of a HAPS for backhauling aerial base stations are demonstrated by the simulation results.
Non-Terrestrial Networks (NTN) are expected to be a critical component of 6th Generation (6G) networks, providing ubiquitous, continuous, and scalable services. Satellites emerge as the primary enabler for NTN, leveraging their extensive coverage, stable orbits, scalability, and adherence to international regulations. However, satellite-based NTN presents unique challenges, including long propagation delay, high Doppler shift, frequent handovers, spectrum sharing complexities, and intricate beam and resource allocation, among others. The integration of NTNs into existing terrestrial networks in 6G introduces a range of novel challenges, including task offloading, network routing, network slicing, and many more. To tackle all these obstacles, this paper proposes Artificial Intelligence (AI) as a promising solution, harnessing its ability to capture intricate correlations among diverse network parameters. We begin by providing a comprehensive background on NTN and AI, highlighting the potential of AI techniques in addressing various NTN challenges. Next, we present an overview of existing works, emphasizing AI as an enabling tool for satellite-based NTN, and explore potential research directions. Furthermore, we discuss ongoing research efforts that aim to enable AI in satellite-based NTN through software-defined implementations, while also discussing the associated challenges. Finally, we conclude by providing insights and recommendations for enabling AI-driven satellite-based NTN in future 6G networks.
The sixth-generation (6G) network will shift its focus to supporting everything including various machine-type devices (MTDs) in an every-one-centric manner. To ubiquitously cover the MTDs working in rural and disastrous areas, satellite communications become indispensable, while mobile edge computing (MEC) also plays an increasingly crucial role. Their sophisticated integration enables wide-area edge intelligence which promises to facilitate globally-distributed customized services. In this article, we present typical use cases of integrated satellite-MEC networks and discuss the main challenges therein. Inspired by the protein structure and the systematic engineering methodology, we propose three minimal integrating structures, based on which a complex integrated satellite-MEC network can be treated as their extension and combination. We discuss the unique characteristics and key problems of each minimal structure. Accordingly, we establish an on-demand network orchestration framework to enrich the hierarchy of network management, which further leads to a process-oriented network optimization method. On that basis, a case study is utilized to showcase the benefits of on-demand network orchestration and process-oriented network optimization. Finally, we outline potential research issues to envision a more intelligent, more secure, and greener integrated network.
The development of computation-intensive and delay-sensitive smart applications has put forward great challenge to the current cellular networks. To cope with this challenge, unmanned aerial vehicles (UAVs) providing additional on-demand communication and computing services has become a promising technology. This letter proposes a novel task offloading framework in UAV-aided mobile edge computing (MEC) networks. Specifically, the MEC queuing delay is considered in the formulated problem, where the average task delay is minimized via jointly optimizing user association and UAV deployment. The optimal transport theory is introduced to analyze the user association sub-problem, and the UAV deployment is optimized by the classical particle swarm optimization algorithm. Simulation results show that the delay performance is significantly improved by the proposed algorithm.
Deep neural network (DNN)-task enabled mobile edge computing (MEC) is gaining ubiquity due to outstanding performance of artificial intelligence. By virtue of characteristics of DNN, this paper develops a joint design of task partitioning and offloading for a DNN task enabled MEC network that consists of a single server and multiple mobile devices (MDs), where the server and each MD employ the welltrained DNNs for task computation. The main contributions of this paper are as follows: First, we propose a layer-level computation partitioning strategy for DNN to partition each MDs task into the subtasks that are either locally computed at the MD or offloaded to the server. Second, we develop a delay prediction model for DNN to characterize the computation delay of each subtask at the MD and the server. Third, we design a slot model and a dynamic pricing strategy for the server to efficiently schedule the offloaded subtasks. Fourth, we jointly optimize the design of task partitioning and offloading to minimize each MDs cost that includes the computation delay, the energy consumption, and the price paid to the server. In particular, we propose two distributed algorithms based on the aggregative game theory to solve the optimization problem.
In mobile edge computing systems, an edge node may have a high load when a large number of mobile devices offload their tasks to it. Those offloaded tasks may experience large processing delay or even be dropped when their deadlines expire. Due to the uncertain load dynamics at the edge nodes, it is challenging for each device to determine its offloading decision (i.e., whether to offload or not, and which edge node it should offload its task to) in a decentralized manner. In this work, we consider non-divisible and delay-sensitive tasks as well as edge load dynamics, and formulate a task offloading problem to minimize the expected long-term cost. We propose a model-free deep reinforcement learning-based distributed algorithm, where each device can determine its offloading decision without knowing the task models and offloading decision of other devices. To improve the estimation of the long-term cost in the algorithm, we incorporate the long short-term memory (LSTM), dueling deep Q-network (DQN), and double-DQN techniques. Simulation results show that our proposed algorithm can better exploit the processing capacities of the edge nodes and significantly reduce the ratio of dropped tasks and average delay when compared with several existing algorithms.
This article adopts a holistic approach to address the problem of poor broadband connectivity in rural areas by suggesting a novel wireless network architecture called "Frugal 5G Network." To arrive at the Frugal 5G Network architecture, we take into consideration rural connectivity needs and the characteristics specific to rural areas. As part of the proposed Frugal 5G Network, we define a heterogeneous access network wherein macrocells provide carpet coverage, while wireless local area networks (WLANs) provide additional capacity to serve village clusters. WLAN is backhauled via a wireless network also called the wireless middle mile network. We define software defined networking and network function virtualization based architecture to make the network flexible and scalable. The concepts of fog computing have also been employed in the network architecture to bring intelligence to the edge (i.e., to the access network). The proposed network architecture is developed independent of 3GPP 5G standards and can serve as a potential solution toward IEEE P2061, a standardization project that aims to design an architecture to facilitate rural broadband communication.