No full-text available
To read the full-text of this research,
you can request a copy directly from the author.
Polihexanide
Abstract
Polihexanide (PHMB) is mostly bactericidal at 0.016–0.02% (1 h) and yeasticidal at 0.1% (5 min). Fungicidal and mycobactericidal activity is species dependent. Its antimicrobial activity is explained by membrane damage. Cellular defence mechanisms include biodegradation of PHMB in A. westerdijkiae, Sphingomonas spp. and Azospirillum spp., tolerance genes in S. cerevisiae and E. coli and point mutation in P. lilacinum. PHMB reduces biofilm mass in developing and existing biofilms in several species. The effect of PHMB on biofilm fixation is unknown. High MIC values indicating tolerance to PHMB have been reported for isolates of P. lilacinum (50,000 mg/l). Low-level exposure results in no MIC change in 32 species, a weak MIC change in 18 species and a strong MIC change in 6 species, which are only stable in E. faecalis and S. aureus, resulting in MIC values as high as 31.3 mg/l (E. faecalis) and 23.5 mg/l (S. aureus). Cross-tolerance to other biocidal agents has not been reported. Cross-resistance to gentamicin has been reported in E. coli. PHMB-resistant isolates have been described in an outbreak of keratitis (Fusarium spp.) and with contaminated disinfectants (P. lilacinum). The overall probability of resistance to PHMB of practical relevance is low in the absence of biofilm.
ResearchGate has not been able to resolve any citations for this publication.
Candida albicans is the most critical fungus causing oral mycosis. Many mouthwashes contain antimicrobial substances, including antifungal agents. This study aimed to investigate the in vitro activity of 15 commercial mouthwashes against 12 strains of C. albicans. The minimal inhibitory concentrations (MICs), minimal fungicidal concentrations (MFCs), and anti-biofilm activity were studied. MICs were determined by the micro-dilution method using 96-well plates, and MFCs were determined by culturing MIC suspensions on Sabouraud dextrose agar. Anti-biofilm activity was evaluated using the crystal violet method. The mouthwashes containing octenidine dihydrochloride (OCT; mean MICs 0.09–0.1%), chlorhexidine digluconate (CHX; MIC 0.12%), and CHX with cetylpyridinium chloride (CPC; MIC 0.13%) exhibited the best activity against C. albicans. The active compound antifungal concentrations were 0.5–0.9 µg/mL for OCT products and 1.1–2.4 µg/mL for CHX rinses. For mouthwashes with CHX + CPC, concentrations were 1.56 µg/mL and 0.65 µg/mL, respectively. Products with polyaminopropyl biguanide (polyhexanide, PHMB; MIC 1.89%) or benzalkonium chloride (BAC; MIC 6.38%) also showed good anti-Candida action. In biofilm reduction studies, mouthwashes with OCT demonstrated the most substantial effect (47–51.1%). Products with CHX (32.1–41.7%), PHMB (38.6%), BAC (35.7%), Scutellaria extract (35.6%), and fluorides + essential oils (33.2%) exhibited moderate antibiofilm activity. The paper also provides an overview of the side effects of CHX, CPC, and OCT. Considering the in vitro activity against Candida albicans, it can be inferred that, clinically, mouthwashes containing OCT are likely to offer the highest effectiveness. Meanwhile, products containing CHX, PHMB, or BAC can be considered as promising alternatives.
Antimicrobial resistance is a critical public health issue that requires a thorough understanding of the factors that influence the selection and spread of antibiotic-resistant bacteria. Biocides, which are widely used in cleaning and disinfection procedures in a variety of settings, may contribute to this resistance by inducing similar defense mechanisms in bacteria against both biocides and antibiotics. However, the strategies used by bacteria to adapt and develop cross-resistance remain poorly understood, particularly within biofilms –a widespread bacterial habitat that significantly influences bacterial tolerance and adaptive strategies. Using a combination of adaptive laboratory evolution experiments, genomic and RT-qPCR analyses, and biofilm structural characterization using confocal microscopy, we investigated in this study how Escherichia coli biofilms adapted after 28 days of exposure to three biocidal active substances and the effects on cross-resistance to antibiotics. Interestingly, polyhexamethylene biguanide (PHMB) exposure led to an increase of gentamicin resistance (GenR) phenotypes in biofilms formed by most of the seven E. coli strains tested. Nevertheless, most variants that emerged under biocidal conditions did not retain the GenR phenotype after removal of antimicrobial stress, suggesting a transient adaptation (adaptive resistance). The whole genome sequencing of variants with stable GenR phenotypes revealed recurrent mutations in genes associated with cellular respiration, including cytochrome oxidase (cydA, cyoC) and ATP synthase (atpG). RT-qPCR analysis revealed an induction of gene expression associated with biofilm matrix production (especially curli synthesis), stress responses, active and passive transport and cell respiration during PHMB exposure, providing insight into potential physiological responses associated with adaptive crossresistance. In addition, confocal laser scanning microscopy (CLSM) observations demonstrated a global effect of PHMB on biofilm architectures and compositions formed by most E. coli strains, with the appearance of dense cellular clusters after a 24h-exposure. In conclusion, our results showed that the PHMB exposure stimulated the emergence of an adaptive cross-resistance to gentamicin in biofilms, likely induced through the activation of physiological responses and biofilm structural modulations altering gradients and microenvironmental conditions in the biological edifice.
Citation: Paleczny, J.; Brożyna, M.; Dudek, B.; Woytoń, A.; Chodaczek, G.; Szajnik, M.; Junka, A. Culture Shock: An Investigation into the Tolerance of Pathogenic Biofilms to Antiseptics in Environments Resembling the Chronic Wound Milieu. Int. These authors contributed equally to this work. Abstract: Credible assessment methods must be applied to evaluate antiseptics' in vitro activity reliably. Studies indicate that the medium for biofilm culturing should resemble the conditions present at the site of infection. We cultured S. aureus, S. epidermidis, P. aeruginosa, C. albicans, and E. coli biofilms in IVWM (In Vitro Wound Milieu)-the medium reflecting wound milieu-and were compared to the ones cultured in the laboratory microbiological Mueller-Hinton (MH) medium. We analyzed and compared crucial biofilm characteristics and treated microbes with polyhexamethylene biguanide hydrochloride (PHMB), povidone-iodine (PVP-I), and super-oxidized solution with hypochlorites (SOHs). Biofilm biomass of S. aureus and S. epidermidis was higher in IVWM than in MH medium. Microbes cultured in IVWM exhibited greater metabolic activity and thickness than in MH medium. Biofilm of the majority of microbial species was more resistant to PHMB and PVP-I in the IVWM than in the MH medium. P. aeruginosa displayed a twofold lower MBEC value of PHMB in the IVWM than in the MH medium. PHMB was more effective in the IVWM than in the MH medium against S. aureus biofilm cultured on a biocellulose carrier (instead of polystyrene). The applied improvement of the standard in vitro methodology allows us to predict the effects of treatment of non-healing wounds with specific antiseptics.
Biofilms are a major problem in hard-to-heal wounds. Moreover, they are composed of different species and are often tolerant to antimicrobial agents. At the same time, interspecific synergy and/or competition occurs when some bacterial species clash. For this reason, the tolerance of two dual-species wound biofilm models of Pseudomonas aeruginosa and Staphylococcus aureus or Enterococcus faecium against antimicrobials and antimicrobial dressings were analyzed quantitatively and by confocal laser scanning microscopy (CLSM). The results were compared to findings with planktonic bacteria. Octenidine-dihydrochloride/phenoxyethanol and polyhexamethylene biguanide (PHMB) irrigation solutions showed a significant, albeit delayed reduction in biofilm bacteria, while the PHMB dressing was not able to induce this effect. However, the cadexomer-iodine dressing caused a sustained reduction in and killed almost all bacteria down to 102 cfu/mL within 6 days compared to the control (1010 cfu/mL). By means of CLSM in untreated human biofilm models, it became evident that P. aeruginosa dominates over E. faecium and S. aureus. Additionally, P. aeruginosa appeared as a vast layer at the bottom of the samples, while S. aureus formed grape-like clusters. In the second model, the distribution was even clearer. Only a few E. faecium were visible, in contrast to the vast layer of P. aeruginosa. It seems that the different species avoid each other and seek their respective niches. These mixed-species biofilm models showed that efficacy and tolerance to antimicrobial substances are nearly species-independent. Their frequent application appears to be important. The bacterial wound biofilm remains a challenge in treatment and requires new, combined therapy options.
Chronic wounds and their treatment present a significant burden to patients and health-care systems alike, with their management further complicated by bacterial infection. Historically, antibiotics have been deployed to prevent and treat infections, but the emergence of bacterial antimi-crobial resistance and the frequent development of biofilms within the wound area necessitates the identification of novel treatment strategies for use within infected chronic wounds. Here, several non-antibiotic compounds, polyhexamethylene biguanide (PHMB), curcumin, retinol, polysorbate 40, ethanol, and D-α-tocopheryl polyethylene glycol succinate 1000 (TPGS) were screened for their antibacterial and antibiofilm capabilities. The minimum inhibitory concentration (MIC) and crystal violet (CV) biofilm clearance against two bacteria frequently associated with infected chronic wounds, Staphylococcus aureus and Pseudomonas aeruginosa, were determined. PHMB was observed to have highly effective antibacterial activity against both bacteria, but its ability to disperse biofilms at MIC levels was variable. Meanwhile, TPGS had limited inhibitory activity but demonstrated potent antibiofilm properties. The subsequent combination of these two compounds in a formulation resulted in a synergistic enhancement of their capability to kill both S. aureus and P. aeruginosa and disperse their biofilms. Collectively, this work highlights the utility of combinatory approaches to the treatment of infected chronic wounds where bacterial colonization and biofilm formation remains significant issues.
Biofilm in chronic wounds is associated with delayed healing and ineffective local treatment. The purpose of this study was to investigate the in vitro anti-biofilm activity of two commonly used antimicrobials, povidone-iodine (PVP-I) and polyhexamethylene biguanide (PHMB). The rate of anti-biofilm activity of PVP-I, PHMB, and phosphate-buffered saline (negative control) was assessed on monomicrobial biofilms of varying maturity and composition. Antimicrobial efficacy was determined by counting colony-forming units (CFU). Live/dead cell staining and time-lapse confocal microscopy were also performed. Both PVP-I and PHMB demonstrated robust in vitro anti-biofilm activity against all tested biofilms; however, PVP-I had a more rapid action versus PHMB against methicillin-resistant Staphylococcus aureus (MRSA) biofilms, as determined by both CFU counts and microscopy. PVP-I completely eradicated Pseudomonas aeruginosa biofilms of 3- and 5-day maturity (in ≤0.5 h) and 7-day maturity (in ≤3 h), while PHMB only partially depleted cell density, with no complete biofilm eradication even after 24 h. In conclusion, PVP-I had a similar in vitro anti-biofilm activity to PHMB against biofilms of varying microbial compositions and maturity, and in some cases demonstrated more potent and rapid activity versus PHMB. PVP-I may be particularly effective in treating MRSA biofilms. However, further high-quality clinical research on the efficacy of antimicrobials is required.
The similarities between fungal and mammalian cells pose inherent challenges for the development of treatments for fungal infections, due to drug crossover recognition of host drug targets by antifungal agents. Thus, there are a limited number of drug classes available for treatment. Treatment is further limited by the acquisition and dissemination of antifungal resistance which contributes to the urgent need of new therapies. Polyhexamethylene biguanide (PHMB) is a cationic antimicrobial polymer with bactericidal, parasiticidal and fungicidal activities. The antifungal mechanism of action appears to involve preferential mechanical disruption of microbial cell structures, offering an alternative to conventional antifungals. However, the antifungal mechanisms have been little studied. The aim of this study was to characterise PHMB’s activities on selected yeast (Saccharomyces cerevisiae, Candida albicans) and filamentous fungal species (Fusarium oxysporum, Penicillium glabrum). Fungal membrane disruption, cell entry and intracellular localisation activities of PHMB were evaluated using viability probe entry and polymer localisation studies. We observed that PHMB initially permeabilises fungal cell membranes and then accumulates within the cytosol. Once in the cytosol, it disrupts the nuclear membrane, leading to DNA binding and fragmentation. The electrostatic interaction of PHMB with membranes suggests other intracellular organelles could be potential targets of its action. Overall, the results indicate multiple antifungal mechanisms, which may help to explain its broad-spectrum efficacy. A better understanding of PHMB’s mechanism(s) of action may aid the development of improved antifungal treatment strategies.
Oral health is a window to a patient’s general well-being. Balance in oral microbiome functions is crucial for health maintenance. A state of oral dysbiosis may lead to a variety of local and systemic pathological conditions. The presence of dental plaque is related to the majority of oral infections. Proper oral hygiene is crucial and the most economic practice contributing to oral health prophylaxis. Aside from prophylactic treatments provided by dental practitioners, mouth rinses, containing antimicrobial agents, are one of the possible tools used for oral care. Our study was to determine whether available mouth rinses and selected products dedicated for professional use are efficient to eradicate biofilm formed by reference and clinical strains of Streptococcus mutans , Streptococcus sanguinis, Streptococcus oralis, Streptococcus mitis, Staphylococcus aureus, Enterococcus faecalis, Lactobacillus rhamnosus and Candida albicans on the surface of hydroxyapatite – major mineral component of a tooth. Therefore, such antimicrobials as chlorhexidine, cetylpyridine chloride, polyhexanide, silver nanoparticles, sulphonated phenolics, and natural antiplaque essential oils and coconut oil were analyzed. Applied experimental settings in in vitro models were designed to reflect accurately the recommended use of the tested substances, therefore four types of eradication procedure were conducted. Sialorrhea simulation was also performed to evaluate antibiofilm potential of diluted mouth rinses. Biofilm was investigated with quantitative method where absorbance values were measured. Statistical differences were assessed using the Kruskal–Wallis test with a post-hoc Dunnett’s analysis. Results have shown that biofilms displayed a diversified sensitivity to the tested antimicrobials. The highest antibiofilm activity was detected for cetylpyridine chloride while the lowest for chlorhexidine. However the differences in E. faecalis biofilm reduction observed after the use of these two compounds were not statistically significant ( p > 0.05), whereas all observed differences in S. aureus survival after exposure to the examined antimicrobial agents were statistically significant ( p < 0.5). The PHMB, both in standard and in sialorrhea simulated conditions had the highest potential against streptococci. The coconut oil reduced C. albicans fungus biofilm by 65.48% but low eradication level was observed in case of bacterial biofilms. The dehydrating mechanism of action of sulfonated phenolics turned out to be ineffective against streptococcal biofilm which in turn was effectively eradicated by silver nanoparticles. The implementation of Antibiofilm Dressing's Activity Measurement method allowed to observe strain-related differences in terms of antimicrobial sensitivity. The obtained results may be introduced in everyday out-patient dental plaque prophylaxis as well as clinical environment.
Healthcare-associated infections (HCAIs) are among the most prominent medical problems worldwide. In the context of increasing antibiotic resistance globally, the use of antiseptics as the main active agent and potentiator of antibiotics for the treatment of purulent-inflammatory complications of traumatic wounds, burns, and surgical wounds can be considered to tackle opportunistic infections and their prevention during war. This study presents a comparative investigation of the antimicrobial efficacy of antiseptics used for surgical antisepsis and antiseptic treatment of skin, mucous membranes, and wounds against multidrug-resistant clinical isolates of Acinetobacter baumannii as a wound pathogen of critical priority (according to the WHO). It was found that strains of A. baumannii, which have natural and acquired resistance to antimicrobial drugs, remain susceptible to modern antiseptics. Antiseptic drugs based on decamethoxine, chlorhexidine, octenidine, polyhexanide, and povidone-iodine 10% and 2% provide effective bactericidal activity against A. baumannii within the working concentrations of these drugs. Chlorhexidine and decamethoxine can inhibit biofilm formation by A. baumannii cells. In terms of bactericidal properties and biofilm formation inhibition, chlorhexidine and decamethoxine are the most effective of all tested antiseptics.
In diabetic foot ulcers (DFUs), biofilm formation is a major challenge that promotes wound chronicity and delays healing. Antiseptics have been proposed to combat biofilms in the management of DFUs. However, there is limited evidence on the activity of these agents against biofilms, and there are questions as to which agents have the best efficiency. Here, we evaluated the antibiofilm activity of sodium hypochlorite, polyvinylpyrrolidoneIodine (PVPI), polyhexamethylenebiguanide (PHMB) and octenidine against Pseudomonas aeruginosa strains using static and dynamic systems in a chronic-wound-like medium (CWM) that mimics the chronic wound environment. Using Antibiofilmogram®, a technology assessing the ability of antiseptics to reduce the initial phase of biofilm formation, we observed the significant activity of antiseptics against biofilm formation by P. aeruginosa (at 1:40 to 1:8 dilutions). Moreover, 1:100 to 1:3 dilutions of the different antiseptics reduced mature biofilms formed after 72 h by 10-log, although higher concentrations were needed in CWM (1:40 to 1:2). Finally, in the BioFlux200TM model, after biofilm debridement, sodium hypochlorite and PHMB were the most effective antiseptics. In conclusion, our study showed that among the four antiseptics tested, sodium hypochlorite demonstrated the best antibiofilm activity against P. aeruginosa biofilms and represents an alternative in the management of DFUs.
Proper protection of vascular access after haemodialysis is one of the key measures for the prevention of catheter-related infections. Various substances with bactericidal and anticoagulant properties are used to fill catheters, but due to the unsatisfactory clinical effects and occurrence of adverse reactions, the search for new substances is still ongoing. In the present paper, we compared the in vitro antimicrobial activity of solutions used for tunnelled catheter locking (taurolidine, trisodium citrate) and solutions of substances that could potentially be used for this purpose (sodium bicarbonate, polyhexanide-betaine). The studies have been conducted on bacteria that most commonly cause catheter-related infections. The values of both minimum inhibitory concentration and minimum biofilm eradication concentration of the substances were determined. The ability of the tested substances to eradicate biofilm from the dialysis catheter surface was also evaluated. The results showed that polyhexanide-betaine inhibited the growth of all microbes comparably to taurolidine, even after ≥ 32-fold dilution. The activity of trisodium citrate and sodium bicarbonate was significantly lower. Polyhexanide exhibited the highest activity in the eradication of bacterial biofilm on polystyrene plates. The biofilm formed on a polyurethane dialysis catheter was resistant to complete eradication by the test substances. Polyhexanide-betaine and taurolidine showed the highest activity. Inhibition of bacterial growth regardless of species was observed not only at the highest concentration of these compounds but also after dilution 32–128x (taurolidine) and 32–1024x (polyhexanide-betaine). Therefore, it can be assumed that taurolidine application as a locking solution prevents catheter colonization and systemic infection development. Taurolidine displays high antimicrobial efficacy against Gram-positive cocci as well as Gram-negative bacilli. On the contrary, the lowest antibacterial effect displayed product contained sodium bicarbonate. The inhibitions of bacterial growth were not satisfactory to consider it as a substance for colonization prevention. Polyhexanidine-betaine possessed potent inhibitory and biofilm eradication properties comparing to all tested products. PHMB is applied as a wound irrigation solution worldwide. However, based on our results, we assume that the PHMB is a promising substance for catheter locking solutions thanks to its safety and high antimicrobial properties.
Many of the most common disinfectant and sanitizer products are formulations of multiple antimicrobial compounds. Products claiming to contain synergistic formulations are common, although there is often little supporting evidence. The antimicrobial interactions of all pairwise combinations of common disinfectants (benzalkonium chloride, didecyldimethylammonium chloride, polyhexamethylene biguanide, chlorocresol, and bronopol) were classified via checkerboard assay and validated by time-kill analyses. Combinations were tested against Acinetobacter baumannii NCTC 12156, Enterococcus faecalis NCTC 13379, Klebsiella pneumoniae NCTC 13443, and Staphylococcus aureus NCTC 13143. Synergistic interactions were identified only for the combinations of chlorocresol with benzalkonium chloride and chlorocresol with polyhexamethylene biguanide. Synergism was not ubiquitously demonstrated against all species tested and was on the borderline of the synergism threshold. These data demonstrate that synergism between disinfectants is uncommon and circumstantial. Most of the antimicrobial interactions tested were characterized as additive. We suggest that this is due to the broad, nonspecific mechanisms associated with disinfectants not providing an opportunity for the combined activities of these compounds to exceed the sum of their parts.
IMPORTANCE The scarcity of observed synergistic interactions suggests that in the case of many disinfectant-based products, combined mechanisms of interaction may be being misinterpreted. We emphasize the need to correctly differentiate between additivity and synergism in antimicrobial formulations, as inappropriate classification may lead to unnecessary issues in the event of regulatory changes. Furthermore, we question the need to focus on synergism and disregard additivity when considering combinations of disinfectants, as the benefits that synergistic interactions provide are not necessarily relevant to the application of the final product.
Wound contaminants are the main cause of healing delay and infection in both chronic and acute wounds; for this reason, the microbial infection management in wound healing is one of the most important components for an effective standard of care. The wound contaminants are most likely to originate from the environment and from the surrounding skin lesion, and to date, the most frequent bacteria isolated are Staphylococcus aureus, Pseudomonas aeruginosa, and Klebsiella pneumoniae. In order to counteract and control these contaminants, the standard care includes topical antiseptic agents. The most commonly used include iodine-releasing agents (e.g., povidone-iodine), hydrogen peroxide, and polyhexanide. This study aims to investigate the in vitro antibacterial activity of a novel topical spray (Fitostimoline® Plus spray) based on 0.1% polyhexanide and Rigenase® against S. aureus, P. aeruginosa, K. pneumoniae, and the combination of S. aureus and K. pneumoniae. The in vitro antimicrobial activity of Fitostimoline® Plus spray was evaluated by the agar disk diffusion assay, quantitative suspension test, and quantitative carrier test, demonstrating that Fitostimoline® Plus spray is able to kill 99.9% bacteria. These results support the microbiological characterization of Fitostimoline® Plus spray confirming the antibacterial activity of polyhexanide (PHMB).
Postmilking teat disinfection is one of the main measures used to prevent mastitis caused by contagious pathogens, such as Staphylococcus aureus. The present study evaluated the antimicrobial activity of polyhexamethylene biguanide (PHMB) and PHMB nanoparticles (NP) against mastitis-causing Staph. aureus using a microdilution assay methodology. A total of 20 mastitis-causing Staph. aureus isolates were used to determine the minimum inhibitory concentrations (MIC) of PHMB and PHMB NP compared with 3 disinfectants commonly used for teat disinfection (chlorhexidine digluconate, povidone-iodine, and sodium dichloroisocyanurate). The MIC90 was defined at the concentrations required to inhibit the growth of 90% of Staph. aureus. Our results indicated that PHMB NP presented the lowest MIC value (<0.03 µg/mL) to inhibit 90% of Staph. aureus, followed by chlorhexidine digluconate (≥0.25 µg/mL) and PHMB (≥0.5 µg/mL). On the other hand, sodium dichloroisocyanurate (≥500 µg/mL) and povidone-iodine (≥8,000 µg/mL) presented the highest concentrations to inhibit the growth of most Staph. aureus. Our preliminary results suggested that both PHMB and PHMB NP have antimicrobial activity against mastitis-causing Staph. aureus, which indicates the potential for both to be used as a teat-dip disinfectant to prevent bovine mastitis.
The treatment of acute and chronic infected wounds with residing biofilm still poses a major challenge in medical care. Interactions of antimicrobial dressings with bacterial load, biofilm matrix and the overall protein-rich wound microenvironment remain insufficiently studied. This analysis aimed to extend the investigation on the efficacy of a variety of antimicrobial dressings using an in vitro biofilm model (lhBIOM) mimicking the specific biofilm-environment in human wounds. Four wound dressings containing polyhexanide (PHMB), octendine di-hydrochloride (OCT), cadexomer-iodine (C-IOD) or ionic silver (AG) were compared regarding their antimicrobial efficacy. Quantitative analysis was performed using a quantitative suspension method, separately assessing remaining microbial counts within the solid biofilm as well as the dressing eluate (representing the absorbed wound exudate). Dressing performance was tested against P. aeruginosa biofilms over the course of 6 days. Scanning electron microscopy (SEM) was used to obtain qualitative visualization on changes in biofilm structure. C-IOD demonstrated superior bacterial reduction. In comparison it was the only dressing achieving a significant reduction of more than 7 log10 steps within 3 days. Neither the OCT- nor the AG-containing dressing exerted a distinct and sustained antimicrobial effect. PHMB achieved a non-significant microbicidal effect (1.71 ± 0.31 log10 steps) at day 1. Over the remaining course (6 days) it demonstrated a significant microbistatic effect compared to OCT, AG and the control. Quantitative results in the dressing eluate correlate with those of the solid biofilm model. Overall, AG- and OCT-containing dressings did not achieve the expected anti-biofilm efficacy, while C-IOD performed best. Chemical interaction with the biofilms extrapolymeric substance (EPS), visualized in the SEM, and dressing configuration (agent concentration and release pattern) are suspected to be responsible. The unexpected low and diverse results of the tested antimicrobial dressings indicate a necessity to rethink non-debridement anti-biofilm therapy. Focussing on the combination of biofilm-disruptive (for EPS structure) and antimicrobial (for residing microorganisms) features, as with C-IOD, using dehydration and iodine, appears reasonably complementary and an optimal solution, as suggested by the here presented in vitro data.
Antibiotic resistance is one of the most important issues facing modern medicine. Some biocides have demonstrated the potential of selecting resistance to antibiotics in bacteria, but data are still very scarce and it is important to better identify the molecules concerned and the underlying mechanisms. This study aimed to assess the potential of polyhexamethylene biguanide (PHMB), a widely used biocide in a variety of sectors, to select antibiotic resistance in Escherichia coli grown in biofilms. Biofilms were grown on inox coupons and then exposed daily to sublethal concentrations of PHMB over 10 days. Antibiotic-resistant variants were then isolated and characterized phenotypically and genotypically to identify the mechanisms of resistance. Repeated exposure to PHMB led to the selection of an E. coli variant (Ec04m1) with stable resistance to gentamycin (8-fold increase in minimum inhibitory concentration (MIC) compared to the parental strain. This was also associated with a significant decrease in the growth rate in the variant. Sequencing and comparison of the parental strain and Ec04m1 whole genomes revealed a nonsense mutation in the aceE gene in the variant. This gene encodes the pyruvate dehydrogenase E1 component of the pyruvate dehydrogenase (PDH) complex, which catalyzes the conversion of pyruvate to acetyl-CoA and CO2. A growth experiment in the presence of acetate confirmed the role of this mutation in a decreased susceptibility to both PHMB and gentamicin (GEN) in the variant. This work highlights the potential of PHMB to select resistance to antibiotics in bacteria, and that enzymes of central metabolic pathways should be considered as a potential target in adaptation strategies, leading to cross-resistance toward biocides and antibiotics in bacteria.
Antiseptic wound ointments are widely used to treat dermal wounds that are microbially contaminated. Polygalacturonic acid (PG)+caprylic acid (CAP) is a novel combination that has been shown to eradicate biofilms. We developed a novel PG+CAP ointment and compared the biofilm eradication capability and cytotoxicity of PG+CAP with that of commercially available antiseptic wound ointments. We used a well-established biofilm model to quantitatively assess the eradication of organisms following exposure to the wound ointments for 2 hours. PG+CAP ointment completely eradicated Candida albicans, multidrug-resistant Pseudomonas aeruginosa, and methicillin-resistant Staphylococcus aureus biofilms, whereas MediHoney, polyhexamethylene biguanide (PHMB), and benzalkonium chloride (BZK) ointments failed to eradicate all biofilms within 2 hours. We assessed cytotoxicity by exposing L-929 fibroblasts to extracts of each ointment; Trypan blue exclusion was used to assess cell viability, and Alamar blue conversion was used to assess metabolic function. After exposure to PG+CAP and MediHoney, fibroblast viability was 96.23% and 95.23%, respectively (Trypan blue), and was comparable to untreated cells (98.77%). PHMB and BZK showed reduced viability (83.25% and 77.83%, respectively, p
Hospital-acquired infection is a great challenge for clinical treatment due to pathogens’ biofilm formation and their antibiotic resistance. Here, we investigate the effect of antiseptic agent polyhexamethylene biguanide (PHMB) and undecylenamidopropyl betaine (UB) against biofilms of four pathogens that are often found in hospitals, including Gram-negative bacteria Pseudomonas aeruginosa and Escherichia coli, Gram-positive bacteria Staphylococcus aureus, and pathogenic fungus, Candida albicans. We show that 0.02% PHMB, which is 10-fold lower than the concentration of commercial products, has a strong inhibitory effect on the growth, initial attachment, and biofilm formation of all tested pathogens. PHMB can also disrupt the preformed biofilms of these pathogens. In contrast, 0.1% UB exhibits a mild inhibitory effect on biofilm formation of the four pathogens. This concentration inhibits the growth of S. aureus and C. albicans yet has no growth effect on P. aeruginosa or E. coli. UB only slightly enhances the anti-biofilm efficacy of PHMB on P. aeruginosa biofilms. However, pretreatment with PslG, a glycosyl hydrolase that can efficiently inhibit and disrupt P. aeruginosa biofilm, highly enhances the clearance effect of PHMB on P. aeruginosa biofilms. Meanwhile, PslG can also disassemble the preformed biofilms of the other three pathogens within 30 min to a similar extent as UB treatment for 24 h.
Background:
A catheter allowing a release of antibacterial substances such as antiseptics into the bladder could be a new way of preventing biofilm formation and subsequent catheter-associated urinary tract infections.
Methods:
Minimal inhibitory and bactericidal concentration (MIC/MBC) determinations in cation-adjusted Mueller-Hinton broth and artificial urine were performed for 4 antiseptics against 3 uropathogenic biofilm producers, Escherichia coli, Pseudomonas aeruginosa, and Proteus mirabilis. Furthermore, effects of octenidine and polyhexanide against catheter biofilm formation were determined by quantification of biofilm-producing bacteria.
Results:
Sodium hypochlorite showed MIC/MBC values between 200 and 800 mg/L for all strains tested. Triclosan was efficient against E. coli and P. mirabilis (MIC ≤2.98 mg/L) but ineffective against P. aeruginosa. Octenidine and polyhexanide showed antibacterial activity against all 3 species tested (MIC 1.95-7.8 and 3.9-31.25 mg/L). Both octenidine and polyhexanide were able to prevent biofilm formation on catheter segments in a concentration dependent manner. Furthermore, adding 250 mg/L of each biocide disrupted biofilms formed by E. coli and P. mirabilis, whereas even 500 mg/L was not sufficient to completely destroy P. aeruginosa biofilms.
Conclusion:
Octenidine- and polyhexanide-containing antiseptics showed a broad effect against typical uropathogenic biofilm producers even in high dilutions. This study provides a basis for further investigation of the potential of octenidine and polyhexanide as prophylaxis or treatment of catheter biofilms.
Background
Pseudomonas aeruginosa is one of the most virulent bacteria and quorum sensing (QS) genes have an importance on virulence factors such as biofilm that provide resistance against disinfectants and antibiotics.
Objective
This study aimed to determine the minimum inhibitory concentrations of the disinfectants, to investigate the effects of disinfectants and ciprofloxacin on biofilm production mature biofilm of clinical P. aeruginosa isolates, and it was aimed to investigate the effects of the agents on the expression levels of several QS-related genes in the isolates.
Methods
Minimum inhibitory concentration (MIC) levels of polyhexamethylene biguanide (PHMB), chlorhexidine (CHX), quaternary ammonium compounds (QAC), glutaraldehyde (GLU) and ciprofloxacin (CIP) against clinical P. aeruginosa isolates were evaluated by microdilution method. Effects of the agents on the biofilm producing capacities of clonally unrelated nine strains were investigated by spectrophotometric method. Alterations in the expression of QS-related genes (lasI, lasR, rhlI and rhlR) were investigated by qPCR in three isolates that were CIP-susceptible and strong biofilm producer.
Results
According to microdilution method results, three isolates were found as resistant, one isolate was found as intermediate susceptible and five isolates were found as susceptible to CIP, and CHX (7.81–31.25 μg/mL) had the lowest MIC against P. aeruginosa. CHX inhibited biofilm production levels of eight of nine isolates, and GLU and CIP inhibited six of nine isolates in the presence of agents at MIC levels. GLU inhibited the mature biofilm levels of three of nine isolates at MIC and MIC/4 levels and four of nine isolates at MIC/2 levels. Expression levels of QS-related genes were reduced or induced in the presence of different disinfectants.
Conclusions
More efforts are required to decrease the risk of ineffective and low-dose application of disinfectants and antimicrobials against bacteria. Targeting of QS-related genes may be a reasonable strategy for the inhibition of virulence factors in P. aeruginosa.
Biofilms pose a relevant factor for wound healing impairment in chronic wounds. With 78% of all chronic wounds being affected by biofilms, research in this area is of high priority, especially since data for evidence-based selection of appropriate antimicrobials and antiseptics is scarce. Therefore, the objective of this study was to evaluate the anti-biofilm efficacy of commercially available hypochlorous wound irrigation solutions compared to established antimicrobials. Using an innovative complex in-vitro human plasma biofilm model (hpBIOM), quantitative reduction of Pseudomonas aeruginosa, Staphylococcus aureus, and Methicillin-resistant S. aureus (MRSA) biofilms by three hypochlorous irrigation solutions [two <0.08% and one 0.2% sodium hypochlorite (NaClO)] was compared to a 0.04% polyhexanide (PHMB) irrigation solution and 0.1% octenidine-dihydrochloride/phenoxyethanol (OCT/PE). Efficacy was compared to a non-challenged planktonic approach, as well as with increased substance volume over a prolonged exposure (up to 72 h). Qualitative visualization of biofilms was performed by scanning electron microscopy (SEM). Both reference agents (OCT/PE and PHMB) induced significant biofilm reductions within 72 h, whereby high volume OCT/PE even managed complete eradication of P. aeruginosa and MRSA biofilms after 72 h. The tested hypochlorous wound irrigation solutions achieved no relevant penetration and eradication of biofilms despite increased volume and exposure. Only 0.2% NaClO managed a low reduction under prolonged exposure. The results demonstrate that low-dosed hypochlorous wound irrigation solutions are significantly less effective than PHMB-based irrigation solution and OCT/PE, thus unsuitable for biofilm eradication on their own. The used complex hpBIOM thereby mimics the highly challenging clinical wound micro-environment, providing a more profound base for future clinical translation.
Francisella tularensis is a highly infectious, intracellular bacterium and it is the causative agent of tularemia. The bacterium has been isolated from more than 250 species, including protozoa. Previous studies have shown that the growth of Legionella pneumophila within the amoeba results in a dramatic increase in the resistance to disinfectants. Since Francisella persists in the environment for years, this study investigates whether Acanthamoeba castellanii-grown F. novicida exhibits an alteration in the resistance to disinfectants. The disinfectants used are didecyldimethylammonium chloride (DDAC) combined with isopropyl alcohol (D1), benzalkonium chloride combined with DDAC and formic acid (D2), and polyhexamethylene biguanide (PHMB, D3). The effect of disinfectants on the bacterial viability is determined by a colony-forming unit (CFU), by transmission electron microscopy (TEM), by fluorescence microscopy, and the damage of the bacterial membrane. Our data has shown that only a one-log10 loss in bacterial viability is exhibited upon treatment of agar-grown Francisella, while in amoeba-grown Francisella there was a three-log10 difference with D3. The D1 disinfectant sterilized the bacteria within 10 s. The treatment of agar-grown F. novicida with D2 reduces bacterial viability by seven-log10 within 10 s and 15 min, respectively. Surprisingly, the treatment of amoeba-grown F. novicida with D2 results in a total loss of bacterial viability. In conclusion, A. castellanii-grown F. novicida is more susceptible to many disinfectants.
The original article [1] contains an error in Fig. 1 whereby sub-figures 1B, 1C & 1D contain the wrong scale on the x-axis. The correct sub-figures are located ahead in this Correction article and should be considered instead.
Background: Uropathogenic Escherichia coli (UPEC) are a frequent cause of catheter associated urinary tract infection (CAUTI). Biocides have been incorporated into catheter-coatings to inhibit bacterial colonisation whilst ideally exhibiting low cytotoxicity and mitigating the selection of resistant bacterial populations. We compared the effects of long-term biocide exposure on susceptibility, biofilm-formation and relative-pathogenicity in eight UPEC isolates.
Methods: Minimum inhibitory concentrations (MIC), minimum bactericidal concentrations (MBC), minimum biofilm eradication concentrations (MBEC) and antibiotic susceptibilities were determined before and after long-term exposure to triclosan, polyhexamethylene biguanide (PHMB), benzalkonium chloride (BAC) and silver nitrate. Biofilm-formation was quantified using a crystal violet assay and relative-pathogenicity was assessed via a Galleria mellonella waxworm model. Cytotoxicity and resulting biocompatability index values were determined against an L929 murine fibroblast cell line.
Results: Biocide exposure resulted in multiple decreases in biocide susceptibility in planktonic and biofilm associated UPEC. Triclosan exposure induced the largest frequency and magnitude of susceptibility decreases at MIC, MBC and MBEC, which correlated to an increase in biofilm biomass in all isolates. Induction of antibiotic-cross-resistance occurred in 6/84 possible combinations of bacteria, biocide and antibiotic. Relative-pathogenicity significantly decreased after triclosan exposure (5/8 isolates), increased after silver nitrate exposure (2/8 isolates) and varied between isolates for PHMB and BAC. Biocompatibility index ranked antiseptic potential as PHMB>triclosan>BAC>silver nitrate.
Conclusion: Biocide exposure in UPEC may lead to reductions in biocide and antibiotic susceptibility, changes in biofilm-formation and alterations relative-pathogenicity. These data indicate the multiple consequences of biocide adaptation that should be considered when selecting an anti-infective catheter-coating agent.
Wound antisepsis has undergone a renaissance due to the introduction of highly effective wound-compatible antimicrobial agents and the spread of multidrug-resistant organisms (MDROs). However, a strict indication must be set for the application of these agents. An infected or critically colonized wound must be treated antiseptically. In addition, systemic antibiotic therapy is required in case the infection spreads. If applied preventively, the Wounds-at-Risk Score allows an assessment of the risk for infection and thus appropriateness of the indication. The content of this updated consensus recommendation still largely consists of discussing properties of octenidine dihydrochloride (OCT), polihexanide, and iodophores. The evaluations of hypochlorite, taurolidine, and silver ions have been updated. For critically colonized and infected chronic wounds as well as for burns, polihexanide is classified as the active agent of choice. The combination 0.1% OCT/phenoxyethanol (PE) solution is suitable for acute, contaminated, and traumatic wounds, including MRSA-colonized wounds due to its deep action. For chronic wounds, preparations with 0.05% OCT are preferable. For bite, stab/puncture, and gunshot wounds, polyvinylpyrrolidone (PVP)-iodine is the first choice, while polihexanide and hypochlorite are superior to PVP-iodine for the treatment of contaminated acute and chronic wounds. For the decolonization of wounds colonized or infected with MDROs, the combination of OCT/PE is preferred. For peritoneal rinsing or rinsing of other cavities with a lack of drainage potential as well as the risk of central nervous system exposure, hypochlorite is the superior active agent. Silver-sulfadiazine is classified as dispensable, while dyes, organic mercury compounds, and hydrogen peroxide alone are classified as obsolete. As promising prospects, acetic acid, the combination of negative pressure wound therapy with the instillation of antiseptics (NPWTi), and cold atmospheric plasma are also subjects of this assessment.
Abstract
Objectives
Test the performance of topical antimicrobial wound solutions against microbial biofilms using in vitro, ex vivo and in vivo model systems at clinically relevant exposure times.
Methods
Topical antimicrobial wound solutions were tested under three different conditions: (in vitro) 4% w/v Melaleuca oil, polyhexamethylene biguanide, chlorhexidine, povidone iodine and hypochlorous acid were tested at short duration exposure times for 15 min against 3 day mature biofilms of Staphylococcus aureus and Pseudomonas aeruginosa; (ex vivo) hypochlorous acid was tested in a porcine skin explant model with 12 cycles of 10 min exposure, over 24 h, against 3 day mature P. aeruginosa biofilms; and (in vivo) 4% w/v Melaleuca oil was applied for 15 min exposure, daily, for 7 days, in 10 patients with chronic non-healing diabetic foot ulcers complicated by biofilm.
Results
In vitro assessment demonstrated variable efficacy in reducing biofilms ranging from 0.5 log10 reductions to full eradication. Repeated instillation of hypochlorous acid in a porcine model achieved <1 log10 reduction (0.77 log10, P = 0.1). Application of 4% w/v Melaleuca oil in vivo resulted in no change to the total microbial load of diabetic foot ulcers complicated by biofilm (median log10 microbial load pre-treatment = 4.9 log10 versus 4.8 log10, P = 0.43).
Conclusions
Short durations of exposure to topical antimicrobial wound solutions commonly utilized by clinicians are ineffective against microbial biofilms, particularly when used in vivo. Wound solutions should not be used as a sole therapy and clinicians should consider multifaceted strategies that include sharp debridement as the gold standard.
Background
The disinfectants polyhexamethylene biguanide (PHMB) and 1-bromo-3-chloro-5,5-dimethylimidazolidine-2,4-dione (BCDMH) each have limitations. So far, their combined usage has not been examined. In this study, the fungicidal activity of combined disinfectant using PHMB and BCDMH, named PB, against Candida albicans was evaluated.
Methods
Suspension quantitative fungicidal test and viable fungi count were used to test fungicidal effects against C. albicans. Coupon corrosion testing was used to evaluate disinfectants' corrosive effects on stainless steel, copper, and aluminum. The mouse lymphoma assay was used to detect mutations induced by PB.
Results and Discussion
Fungicidal activity of the combination of 40 mg/L PHMB and 40 mg/L BCDMH was comparable to, or even better than, those of 600 mg/L PHMB or 640 mg/L BCDMH alone. The combination of 400 mg/L PHMB and 400 mg/L BCDMH exhibited good fungicidal effects in field applications. The combination of 100 mg/L PHMB and 100 mg/L BCDMH did not have corrosive effects on stainless steel and no mutagenic effect was observed under the test conditions.
Conclusions
The combination of PHMB and BCDMH has strong fungicidal effects and little metal corrosive and mutagenic effect and can be used as one suitable fungicide for wide household and industrial applications, including shipping containers.
Abstract Background Reduction of accidental contamination of the near-patient environment has potential to reduce acquisition of healthcare-associated infection(s). Although medical gloves should be removed when soiled or touching the environment, compliance is variable. The use of antimicrobial-impregnated medical gloves could reduce the horizontal-transfer of bacterial contamination between surfaces. Aim Determine the activity of antimicrobial-impregnated gloves against common hospital pathogens: Streptococcus pyogenes, carbapenem-resistant E.coli (CREC), MRSA and ESBL-producing Klebsiella pneumoniae. Methods Fingerpads (~1cm2) of PHMB-treated and untreated gloves were inoculated with 10 μL (~104 colony-forming-units [cfu]) of test-bacteria prepared in heavy-soiling (0.5%BSA), blood or distilled-water (no-soiling) and sampled after 0.25, 1, 10 or 15 min contact-time. Donor surfaces (~1cm2 computer-keys) contaminated with wet/dry inoculum were touched with the fingerpad of treated/untreated gloves and subsequently pressed onto recipient (uncontaminated) computer-keys. Results Approximately 4.50log10cfu of all bacteria persisted after 15 min on untreated gloves regardless of soil-type. In the absence of soiling, PHMB-treated gloves reduced surface-contamination by ~4.5log10cfu (>99.99%) within 10 min of contact-time but only ~2.5log10 (>99.9%) and ~1.0log10 reduction respectively when heavy-soiling or blood was present. Gloves became highly-contaminated (~4.52log10–4.91log10cfu) when handling recently-contaminated computer-keys. Untreated gloves contaminated “recipient” surfaces (~4.5log10cfu) while PHMB-treated gloves transferred fewer bacteria (2.4–3.6log10cfu). When surface contamination was dry, PHMB gloves transferred fewer bacteria (0.3–0.6log10cfu) to “recipient” surfaces than untreated gloves (1.0–1.9log10; P
Staphylococcus aureus (MRSA) resistant to decolonization agents such as mupirocin and chlorhexidine increase the need to develop alternative decolonization molecules. The absence of reported adverse reactions and bacterial resistance to polyhexanide makes it an excellent choice as topical antiseptic. In the present study we evaluated the in vitro and in vivo capacity to generate strains with reduced polyhexanide susceptibility and cross-resistance with chlorhexidine and/or antibiotics currently used in clinic. Here we report the in vitro emergence of reduced-susceptibility to polyhexanide by prolonged-stepwise exposure to low concentrations in broth culture. Reduced susceptibility to polyhexanide was associated with genomic changes in the mprF and purR genes, and with concomitant decreased susceptibility to daptomycin and other cell-wall active antibiotics. However, the in vitro emergence of reduced-susceptibility to polyhexanide did not result in cross-resistance to chlorhexidine antiseptic. During in vivo polyhexanide clinical decolonization treatment, neither polyhexanide reduced-susceptibility nor chlorhexidine cross-resistance were observed. Together, these observations suggest that polyhexanide could be used safely for decolonisation of carriers of chlorhexidine-resistant S. aureus strains but highlight the need for careful use of polyhexanide at low antiseptic concentrations.
Background:
Burn wounds cause high levels of morbidity and mortality worldwide. People with burns are particularly vulnerable to infections; over 75% of all burn deaths (after initial resuscitation) result from infection. Antiseptics are topical agents that act to prevent growth of micro-organisms. A wide range are used with the intention of preventing infection and promoting healing of burn wounds.
Objectives:
To assess the effects and safety of antiseptics for the treatment of burns in any care setting.
Search methods:
In September 2016 we searched the Cochrane Wounds Specialised Register, the Cochrane Central Register of Controlled Trials (CENTRAL), Ovid MEDLINE, Ovid MEDLINE (In-Process & Other Non-Indexed Citations), Ovid Embase, and EBSCO CINAHL. We also searched three clinical trials registries and references of included studies and relevant systematic reviews. There were no restrictions based on language, date of publication or study setting.
Selection criteria:
We included randomised controlled trials (RCTs) that enrolled people with any burn wound and assessed the use of a topical treatment with antiseptic properties.
Data collection and analysis:
Two review authors independently performed study selection, risk of bias assessment and data extraction.
Main results:
We included 56 RCTs with 5807 randomised participants. Almost all trials had poorly reported methodology, meaning that it is unclear whether they were at high risk of bias. In many cases the primary review outcomes, wound healing and infection, were not reported, or were reported incompletely.Most trials enrolled people with recent burns, described as second-degree and less than 40% of total body surface area; most participants were adults. Antiseptic agents assessed were: silver-based, honey, Aloe Vera, iodine-based, chlorhexidine or polyhexanide (biguanides), sodium hypochlorite, merbromin, ethacridine lactate, cerium nitrate and Arnebia euchroma. Most studies compared antiseptic with a topical antibiotic, primarily silver sulfadiazine (SSD); others compared antiseptic with a non-antibacterial treatment or another antiseptic. Most evidence was assessed as low or very low certainty, often because of imprecision resulting from few participants, low event rates, or both, often in single studies. Antiseptics versus topical antibioticsCompared with the topical antibiotic, SSD, there is low certainty evidence that, on average, there is no clear difference in the hazard of healing (chance of healing over time), between silver-based antiseptics and SSD (HR 1.25, 95% CI 0.94 to 1.67; I(2) = 0%; 3 studies; 259 participants); silver-based antiseptics may, on average, increase the number of healing events over 21 or 28 days' follow-up (RR 1.17 95% CI 1.00 to 1.37; I(2) = 45%; 5 studies; 408 participants) and may, on average, reduce mean time to healing (difference in means -3.33 days; 95% CI -4.96 to -1.70; I(2) = 87%; 10 studies; 979 participants).There is moderate certainty evidence that, on average, burns treated with honey are probably more likely to heal over time compared with topical antibiotics (HR 2.45, 95% CI 1.71 to 3.52; I(2) = 66%; 5 studies; 140 participants).There is low certainty evidence from single trials that sodium hypochlorite may, on average, slightly reduce mean time to healing compared with SSD (difference in means -2.10 days, 95% CI -3.87 to -0.33, 10 participants (20 burns)) as may merbromin compared with zinc sulfadiazine (difference in means -3.48 days, 95% CI -6.85 to -0.11, 50 relevant participants). Other comparisons with low or very low certainty evidence did not find clear differences between groups.Most comparisons did not report data on infection. Based on the available data we cannot be certain if antiseptic treatments increase or reduce the risk of infection compared with topical antibiotics (very low certainty evidence). Antiseptics versus alternative antisepticsThere may be some reduction in mean time to healing for wounds treated with povidone iodine compared with chlorhexidine (MD -2.21 days, 95% CI 0.34 to 4.08). Other evidence showed no clear differences and is of low or very low certainty. Antiseptics versus non-antibacterial comparatorsWe found high certainty evidence that treating burns with honey, on average, reduced mean times to healing in comparison with non-antibacterial treatments (difference in means -5.3 days, 95% CI -6.30 to -4.34; I(2) = 71%; 4 studies; 1156 participants) but this comparison included some unconventional treatments such as amniotic membrane and potato peel. There is moderate certainty evidence that honey probably also increases the likelihood of wounds healing over time compared to unconventional anti-bacterial treatments (HR 2.86, 95% C 1.60 to 5.11; I(2) = 50%; 2 studies; 154 participants).There is moderate certainty evidence that, on average, burns treated with nanocrystalline silver dressings probably have a slightly shorter mean time to healing than those treated with Vaseline gauze (difference in means -3.49 days, 95% CI -4.46 to -2.52; I(2) = 0%; 2 studies, 204 participants), but low certainty evidence that there may be little or no difference in numbers of healing events at 14 days between burns treated with silver xenograft or paraffin gauze (RR 1.13, 95% CI 0.59 to 2.16 1 study; 32 participants). Other comparisons represented low or very low certainty evidence.It is uncertain whether infection rates in burns treated with either silver-based antiseptics or honey differ compared with non-antimicrobial treatments (very low certainty evidence). There is probably no difference in infection rates between an iodine-based treatment compared with moist exposed burn ointment (moderate certainty evidence). It is also uncertain whether infection rates differ for SSD plus cerium nitrate, compared with SSD alone (low certainty evidence).Mortality was low where reported. Most comparisons provided low certainty evidence that there may be little or no difference between many treatments. There may be fewer deaths in groups treated with cerium nitrate plus SSD compared with SSD alone (RR 0.22, 95% CI 0.05 to 0.99; I(2) = 0%, 2 studies, 214 participants) (low certainty evidence).
Authors' conclusions:
It was often uncertain whether antiseptics were associated with any difference in healing, infections, or other outcomes. Where there is moderate or high certainty evidence, decision makers need to consider the applicability of the evidence from the comparison to their patients. Reporting was poor, to the extent that we are not confident that most trials are free from risk of bias.
Background:
Device-associated infections due to biofilm-producing methicillin-resistant Staphylococcus aureus (MRSA) have been recently associated with the failure of antibiotic treatment and decolonization measures. The goal of our study was to evaluate the extent to which the formation of biofilms influenced the efficacy of topical decolonization agents or disinfectants such as mupirocin (MUP), octenidine (OCT), chlorhexidine (CHG), polyhexanide (POL), and chloroxylenol (CLO).
Methods:
Bacterial killing in biofilms by the disinfectants and MUP was determined as the reduction [%] in metabolic activity determined by a biofilm viability assay that uses kinetic analysis of metabolic activity. The test substances were diluted in water with standardized hardness (WSH) at 25 °C at the standard concentration as well as half the standard concentration to demonstrate the dilution effects in a practical setting. The tested concentrations were: CHG 1%, 2%; OCT 0.1%, 0.05%; PH 0.04%, 0.02%; and CLO 0.12%, 0.24%. A test organism suspension, 1 mL containing ~1 × 10(9) bacterial cells/mL, and 1 mL of sterile WSH were mixed and incubated for six different exposure times (15 s, 1, 3, 5, 10 and 20 min) after the test substance was added. Additionally, the bactericidal effects of all substances were tested on planktonic bacteria and measured as the log10 reduction.
Results:
The disinfectants OCT and CHG showed good efficacy in inhibiting MRSA in biofilms with reduction rates of 94 ± 1% and 91 ± 1%, respectively. POL, on the other hand, had a maximum efficacy of only 81 ± 7%. Compared to the tested disinfectants, MUP showed a significantly lower efficacy with <20% inhibition (p < .05). Bactericidal effects were the greatest for CHG (log10 reduction of 9.0), followed by OCT (7.7), POL (5.1), and CLO (6.8). MUP, however, showed a very low bactericidal effect of only 2.1. Even when the exposure time was increased to 24 h, 2% MUP did not show sufficient bactericidal effect.
Conclusions:
Our data provide evidence that OCT and CHG are effective components for disinfection of MRSA-biofilms. On the other hand, exposure to MUP at the standard concentrations in topical preparations did not effectively inhibit MRSA-biofilms and also did not show adequate bactericidal effects. Combining an MUP-based decolonization regimen with a disinfectant such as OCT or CHG could decrease decolonization failure.
Objective:
By default, the antimicrobial efficacy of antiseptics used in wound management is tested in vitro under standardised conditions according to European standard DIN EN 13727, with albumin and sheep erythrocytes used as organic challenge. However, it is not clear whether these testing conditions adequately reflect the wound bed environment and its interaction with antiseptic products intended to be used in wounds in humans.
Method:
This study compared the efficacy of different commercial antiseptic products based on octenidine dihydrochloride (OCT), polyhexamethylene biguanide (PHMB) and povidone-iodine under challenge with human wound exudate collected from the hard-to-heal wounds of patients, compared to the standardised organic load, in an in vitro setting according to DIN EN 13727.
Results:
The bactericidal efficacy of the tested products was reduced to a different extent when challenged with human wound exudate, compared to the standardised conditions. Overall, OCT-based products showed the necessary germ count reductions at the shortest exposure times (e.g., 15 seconds for Octenisept (Schülke & Mayr GmbH, Germany)). PHMB-based products were the least efficient. In addition to the protein content, other components of wound exudate, such as the microbiota, seem to influence the efficacy of antiseptics.
Conclusion:
This study demonstrated that the standardised in vitro test conditions may only partially reflect actual wound bed conditions in humans.
Objectives:
Due to a steady increase in the detection of daptomycin-resistant (DAP-R) Staphylococcus aureus (S. aureus) at three medical centres in Cologne, Germany, molecular surveillance was established from June 2016 to June 2018 to investigate the causes of the emergence and spread of respective isolates. Seventy-five S. aureus isolates, both DAP-R and daptomycin-susceptible (DAP-S), were collected from forty-two patients for further analysis.
Methods:
Broth microdilution was used to determine the MICs for daptomycin (DAP) and polyhexamethylene biguanide/polyhexanide (PHMB). To investigate the effect of PHMB on the development of DAP resistance, we performed selection experiments with PHMB. All isolates studied were subjected to whole genome sequencing (WGS). Epidemiological, clinical, microbiological and molecular data were analysed comparatively.
Results:
Acquisition of DAP resistance was mainly observed in patients suffering from acute and chronic wounds (40/42, 96.2%) treated with antiseptic (31/42, 73.8%) rather than systemic antibiotic therapy using DAP or vancomycin (VAN) (7/42, 16.7%). DAP-R S. aureus had a diverse genetic background; however, within individual patients, isolates were closely related. At least three potential transmission events were detected. Most DAP-R isolates had concomitant elevated MICs for PHMB (50/54, 92.6%), and in vitro selection experiments confirmed that PHMB treatment is capable of generating DAP resistance. DAP resistance could be linked to twelve different polymorphisms in the mprF gene in the majority of clinical isolates (52/54, 96.3%) as well as in all in vitro selected strains.
Conclusions:
DAP resistance in S. aureus can occur independently of prior antibiotic therapy and can be selected by PHMB. Therefore, wound treatment with PHMB may trigger individual resistance development associated with gain-of-function mutations in the mprF gene.
Objective:
Antiseptics are widely used in wound management to prevent or treat wound infections, and have been shown to have antibiofilm efficacy. The objective of this study was to assess the effectiveness of a polyhexamethylene biguanide (PHMB)-containing wound cleansing and irrigation solution on model biofilm of pathogens known to cause wound infections compared with a number of other antimicrobial wound cleansing and irrigation solutions.
Method:
Staphylococcus aureus and Pseudomonas aeruginosa single-species biofilms were cultured using microtitre plate and Centers for Disease Control and Prevention (CDC) biofilm reactor methods. Following a 24-hour incubation period, the biofilms were rinsed to remove planktonic microorganisms and then challenged with wound cleansing and irrigation solutions. Following incubation of the biofilms with a variety of concentrations of the test solutions (50%, 75% or 100%) for 20, 30, 40, 50 or 60 minutes, remaining viable organisms from the treated biofilms were quantified.
Results:
The six antimicrobial wound cleansing and irrigation solutions used were all effective in eradicating Staphylococcus aureus biofilm bacteria in both test models. However, the results were more variable for the more tolerant Pseudomonas aeruginosa biofilm. Only one of the six solutions (sea salt and oxychlorite/NaOCl-containing solution) was able to eradicate Pseudomonas aeruginosa biofilm using the microtitre plate assay. Of the six solutions, three (a solution containing PHMB and poloxamer 188 surfactant, a solution containing hypochlorous acid (HOCl) and a solution containing NaOCl/HOCl) showed increasing levels of eradication of Pseudomonas aeruginosa biofilm microorganisms with increasing concentration and exposure time. Using the CDC biofilm reactor model, all six cleansing and irrigation solutions, except for the solution containing HOCl, were able to eradicate Pseudomonas aeruginosa biofilms such that no viable microorganisms were recovered.
Conclusion:
This study demonstrated that a PHMB-containing wound cleansing and irrigation solution was as effective as other antimicrobial wound irrigation solutions for antibiofilm efficacy. Together with the low toxicity, good safety profile and absence of any reported acquisition of bacterial resistance to PHMB, the antibiofilm effectiveness data support the alignment of this cleansing and irrigation solution with antimicrobial stewardship (AMS) strategies.
The propagation of antimicrobial resistance (AMR) is constantly paralyzing our healthcare systems. In addition to the pressure of antibiotic selection, the roles of non-antibiotic compounds in disseminating antibiotic resistance genes (ARGs) are a matter of great concerns. This study aimed to explore the impact of different disinfectants on the horizontal transfer of ARGs and their underlying mechanisms. First, the effects of different kinds of disinfectants on the conjugative transfer of RP4–7 plasmid were evaluated. Results showed that quaternary ammonium salt, organic halogen, alcohol and guanidine disinfectants significantly facilitated the conjugative transfer. Conversely, heavy-metals, peroxides and phenols otherwise displayed an inhibitory effect. Furthermore, we deciphered the mechanism by which guanidine disinfectants promoted conjugation, which includes increased cell membrane permeability, over-production of ROS, enhanced SOS response, and altered expression of conjugative transfer-related genes. More critically, we also revealed that guanidine disinfectants promoted bacterial energy metabolism by enhancing the activity of electron transport chain (ETC) and proton force motive (PMF), thus promoting ATP synthesis and flagellum motility. Overall, our findings reveal the promotive effects of disinfectants on the transmission of ARGs and highlight the potential risks caused by the massive use of guanidine disinfectants, especially during the COVID-19 pandemic.
Background:
Uropathogenic Escherichia coli (UPEC) are a primary cause of catheter-associated urinary tract infections (CAUTIs), often forming mature recalcitrant biofilms on the catheter surface. Anti-infective catheter coatings containing single biocides have been developed but display limited antimicrobial activity due to the selection of biocide-resistant bacterial populations. Furthermore, biocides often display cytotoxicity at concentrations required to eradicate biofilms, limiting their antiseptic potential. Quorum-sensing inhibitors (QSIs) provide a novel anti-infective approach to disrupt biofilm formation on the catheter surface and help prevent CAUTIs.
Aim:
To evaluate the combinatorial impact of biocides and QSIs at bacteriostatic, bactericidal and biofilm eradication concentrations in parallel to assessing cytotoxicity in a bladder smooth muscle (BSM) cell line.
Methods:
Checkerboard assays were performed to determine fractional inhibitory, bactericidal, and biofilm eradication concentrations of test combinations in UPEC and combined cytotoxic effects in BSM cells.
Findings:
Synergistic antimicrobial activity was observed between polyhexamethylene biguanide, benzalkonium chloride or silver nitrate in combination with either cinnamaldehyde or furanone-C30 against UPEC biofilms. However, furanone-C30 was cytotoxic at concentrations below those required for even bacteriostatic activity. A dose-dependent cytotoxicity profile was observed for cinnamaldehyde when in combination with BAC, PHMB or silver nitrate. Both PHMB and silver nitrate displayed combined bacteriostatic and bactericidal activity below the half-maximum inhibitory concentration (IC50). Triclosan in combination with both QSIs displayed antagonistic activity in both UPEC and BSM cells.
Conclusion:
PHMB and silver in combination with cinnamaldehyde display synergistic antimicrobial activity in UPEC at non-cytotoxic concentrations, suggesting potential as anti-infective catheter-coating agents.
Purpureocillium lilacinum has been recently found to contaminate a 20% (200,000 μg/mL) aqueous solution of polyhexamethylene biguanide hydrochloride (PHMB) . We aimed to elucidate the mechanism underlying the resistance of P. lilacinum to PHMB. First, we induced the PHMB-resistant (IR) strains IFM 67050 (IR) and IFM 65838 (IR) from the type strain P. lilacinum CBS 284.36T via cultivation in a medium containing high concentrations of PHMB. We then analyzed the DNA sequences via Illumina sequencing to evaluate the presence of genetic mutations in IFM 65838 (IR) . Further, we established an IFM 65838 (IR) uridine/uracil auxotrophic strain, and using the orotidine-5'-decarboxylase gene, pyrG as a selection marker, we tried to knockout a mutant gene in IFM 65838 (IR) using the CRISPR-Cas9 genome-editing technique. The growth rates of IFM 67050 (IR) and IFM 65838 (IR) in medium containing PHMB increased, and the minimum inhibitory concentrations (MICs) against PHMB also increased. Based on the DNA sequence analysis, we found a nonsynonymous point mutation in the gene PLI-008146 (G779A) in IFM 67050 (IR) and IFM 65838 (IR) . This point mutation leads to site combinations of splicing changes that cause partial sequences deletion (p.Y251_G281del) in the ΔPLI-008146 locus of IFM 65838 (IR) , and deletion sequences include partial adenosine/AMP deaminase motif (PF00962) orthologous to adenosine deaminase (ADA) (GeneBank: OAQ82383.1) . Furthermore, the mutant gene ΔPLI-008146 was successfully knocked out from the resistanceinduced strain using a novel CRISPR-Cas9 gene transformation method. A considerable reduction in growth rate and MIC against PHMB was observed in the absence of the mutant gene. Therefore, ADA may represent an important resistance factor in PHMB-resistant P. lilacinum.
Aim:
To compare the effectiveness of different intracanal medicaments against polymicrobial biofilm formed by Enterococcus faecalis, Staphylococcus aureus, and Candida albicans.
Materials and methods:
Eighty mature human roots with intraradicular polymicrobial biofilm were randomly assigned into four groups (n = 20). Intracanal medicaments 0.2% polyhexamethylene biguanide (PHMB), 2% chlorhexidine (CHX), and calcium hydroxide (CH) were applied into the root canals. Collected dentine samples were tested at 7th, 15th, and 30th day for microbial growth, and the colony-forming units per ml (CFU/ml) were determined.
Results:
The CFU/ml data were analyzed using unpaired t-test and one-way ANOVA-F comparison test. All medicaments resulted in a significant reduction (P < 0.05) in microbial growth at all time intervals compared to the control group. CHX and PHMB showed a similar reduction in CFU/ml at 7th and 15th day but significantly more than CH at all time intervals. At 30th day, PHMB caused a significantly more reduction in CFU/ml than CHX.
Conclusions:
All the three tested intracanal medicaments such as CH, CHX, and PHMB Gel were effective in reducing the microbial count. CH has a limited antimicrobial effect against the polymicrobial biofilm found inside the root canal. 2% CHX gel has a time-dependent antimicrobial effect. PHMB has a superior antimicrobial effect in comparison with CHX and CH.
We isolated a fungus from a 20% (= 200,000 µg/mL) aqueous solution of polyhexamethylene biguanide hydrochloride (PHMB), a widely used antimicrobial and examined its morphology and drug resistance profile. Based on the sequence of the internal transcribed spacer region of ribosomal DNA, the fungus was identified as Purpureocillium lilacinum. Although the P. lilacinum type and resistant strains showed similar morphology, the latter had extremely low PHMB susceptibility and was able to grow in 20% aqueous solution of PHMB, which eliminated the type strain. The minimum inhibitory concentration (MIC) of PHMB for the resistant strain was significantly higher than that of the type strain and other pathogenic filamentous fungi and yeasts. The susceptibility to antimicrobial agents and antifungal agents other than PHMB was similar to that of the type strain, therefore the drug resistance of the isolate was specific to PHMB. Furthermore, we sequenced the genome of the isolate to predict PHMB resistance-related genes. Despite its high resistance to PHMB, no well-known genes homologous to fungal PHMB-resistant genes were detected in the genome of the resistant strain. In summary, P. lilacinum was found to be significantly more resistant to PHMB than previously reported, via an unidentified mechanism of drug resistance.
The antimicrobial efficacy of antiseptics used in wound management is tested in vitro under standardised conditions according to DIN EN 13727, with albumin and sheep erythrocytes used as organic challenge. However, these testing conditions do not adequately simulate the wound bed environment. Thus, the aim of this study was to compare the efficacy of different antiseptics such as octenidine dihydrochloride (OCT), chlorhexidine digluconate (CHX), polyhexamethylene biguanide (PHMB), and povidone‐iodine under challenge with human wound exudate instead of standardised organic load in an in vitro setting according to DIN EN 13727. Moreover, protein contents, pH, and temperature were compared with standardised testing conditions. The tested antiseptic agents were reduced to different extents based on their bactericidal efficacy, when challenged with human wound exudate compared with standardised conditions. Overall, 0.10% OCT showed the highest effects reaching full efficacy after 30 seconds. CHX and PHMB were the least efficient. Next to the protein content, other components of wound exudate, such as the microflora, seem to influence the efficacy of antiseptics. In summary, the optimisation of in vitro testing conditions in future applications, to more adequately simulate the wound bed environment, will allow a more realistic picture on the potential performance of antiseptics in clinical practice.
Background:
Many antiseptics have been used to treat wounds.
Aim:
To compare the microbicidal efficacy of ClHO (Clortech R) with other other antiseptics used on wounds, healthy skin and mucous membranes.
Methods:
We study the microbicidal efficacy of 13 antiseptic products on 8 microorganisms (3 Gram-positive;3 Gram-negative; 2 yeasts) inoculated on organic germ-carriers. In addition, the loss of efficacy against Staphylococcus aureus and Pseudomonas aeruginosa with biofilm was assessed with the 6 best-performing products.
Findings:
1% Chlorhexidine had the highest microbicidal effect at 1 minute. At 5 minutes, 500 and 1500 mg/L ClHO showed similar, or better, activity than the other antiseptics studied. The ClHO concentration of 300 mg/L achieved this same efficacy at 10 minutes. The product that lost the most efficacy due to biofilm was 1% Chlorhexidine, while 1% PVP-I and ClHO at either 300 or 500 mg/L were moderately affected by biofilm. The most effective in the presence of biofilm was ClHO at 1500 mg/L.
Conclusions:
ClHO at medium-low concentrations (300 or 500 mg/L) is a good antiseptic that can be used on wounds and mucous membranes for 5-10 minutes. Lower concentrations of ClHO, as well as of the other antiseptics studied, were less effective or more altered by the biofilm. ClHO at a concentration of 1500 mg/L is very effective in presence or absence of biofilm that can be used on healthy skin for 5 minutes.
Purpose:
The presence of biofilm in the lens case has been shown to be a risk factor for contamination of lenses and consequently microbial keratitis. This study aimed to evaluate effectiveness of solutions for rigid contact lenses in prevention and disruption of biofilm in lens cases and methods for biofilm detection.
Method:
This study adopted a stepwise approach to evaluate effectiveness of four rigid lens disinfecting solutions against biofilm. These included two polyhexamethylene bigiuanide (PHMB) solutions and a chlorhexidine/PHMB-based solution, as well as a novel povidone-iodine formulation. The presence of biofilm following exposure to the solutions was assessed using both crystal violet (CV) staining and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) viability assay, taking into account the effect of lens case design. Three lens case designs, conventional flat, large bucket type, and cylindrical cases, were investigated for the ability to trap stain and allow biofilm formation.
Results:
Considerable differences were noted between solutions in their ability to prevent and disrupt biofilm (p < 0.001). Lens case design greatly influenced optical density (OD) measurements even in negative controls, as cylindrical cases trapped more stain, increasing OD readings. Correcting for this factor reduced variations, but could not differentiate between residues and biofilm. MTT assay revealed that both povidone-iodine and chlorhexidine-containing solutions could effectively kill > 95% of organisms, whilst PHMB-based solutions were less effective with up to 55% of staphylococci and 41% of Pseudomonas surviving at 24 h.
Conclusion:
Biofilm can rapidly form in lens cases and may not be killed by disinfecting solutions. Of the solutions tested, none were able to prevent biofilm formation or disrupt established biofilm, but those containing chlorhexidine or povidone iodine were able to penetrate the biofilm and kill organisms. Assessment of biofilm by CV assay may be confounded by lens case design. Whilst CV assay can demonstrate presence of biofilm, this technique should be accompanied by viability assay to determine bactericidal activity.
The aim of this study was to investigate the effect of polyhexanide (polyhexamethylene biguanide)-betaine (PHMB-B) compared with 2% chlorhexidine against biofilms of high-risk and/or multidrug-resistant bacterial clones. The minimum inhibitory concentrations of both biocides were determined by microdilution. The effect of PHMB-B and chlorhexidine on biofilm was evaluated by spectrophotometry and cell viability assays. At commercial concentrations, PHMB-B reduced 24 h, 48 h and 1-week biofilms of all pathogens tested. PHMB-B was more active than 2% chlorhexidine against Gram-negative bacterial 24 h and 48 h biofilms and Gram-positive bacterial 7-day biofilms. In summary, the activity of PHMB-B was superior to that of 2% chlorhexidine in those biofilms.
Polyhexamethylene biguanide (PHMB) was used as a stabilizing ligand to synthesize uniform silver nanoparticles (Ag NPs). The effects and action mechanism of PHMB functionalized Ag NPs (Ag NPs-PHMB) on the growth of the Gram-positive bacteria Staphylococcus aureus were investigated. The results showed that a high concentration Ag NPs-PHMB could be obtained and prepared particles were fairly uniform. Prepared Ag NPs-PHMB enhanced the bactericidal effect and the log kill reached 5.06 when S. aureus was exposed to Ag NPs-PHMB for 20 min. Ag NPs-PHMB caused damage to cell wall, a decrease in the membrane fluidity, and leakage of K+, Mg2+, ATP and proteins from the cell, eventually leading to the death of S. aureus.
Aim
To evaluate the antimicrobial activity of 0.2% polyhexamethilene biguanide (PHMB) in root canal models infected with Enterococcus faecalis, Candida albicans and Staphylococcus epidermidis. PHMB was compared in these tests with 2.5% NaOCl and 0.2% CHX.
Methods
Prepared models of 50 human root canals (n=50) were immerged in mixed, four-weeks old culture that consisted of E .faecalis, S. epidermidis and C. albicans. Roots were randomly divided into three groups: one with 30 (n=30) and two with 10 (n=10) samples. Samples were treated with polyhexamethylene biguanide (PHMB) (0.2%), sodium hypochlorite (NaOCl) (2.5%) and chlorhexidine (CHX) (0.2%), respectively. Root dentin was sampled before and after the tretment with these solutions. Colony-forming units (CFU) were counted to asses the antimicrobial effects of three solutions on viability of selected microrganisms in specimens before and after the treatment.T-test was used for comparison of results between specimens before and after the treatment, while Newman-Keuls test was used for pairwise comparison at p=0.05.
Results
The PHMB was significantly more efficient in reducing the number of all three tested microorganisms. NaOCl and CHX made only statistically significant (p<0.05) difference in case of E. faecalis and S. epidermidis. In the case of C. albicans, this difference was not statistically significant due to the small number of positive samples and high initial dispersion of results. Conclusion
Both solutions PHMB and NaOCl were successful in eliminating E. faecalis and S. epidermidis from the mature dentin biofilm, CHX was not successful enough.
An in vitro model was developed to assess the effects of topical antimicrobials on taxonomically defined wound biofilms. Biofilms were exposed over seven days to povidone-iodine, silver acetate or polyhexamethylene biguanide (PHMB) at concentrations used in wound dressings. The rank order of tolerance in multi-species biofilms, based on an analysis of the average bacterial counts over time was P. aeruginosa > methicillin-resistant Staphylococcus aureus (MRSA) > B. fragilis > S. pyogenes. The rank order of effectiveness for the antimicrobials in the biofilm model was povidone-iodine > PHMB > silver acetate. None of the test compounds eradicated P. aeruginosa or MRSA from the biofilms although all compounds except silver acetate eliminated S. pyogenes. Antimicrobial effectiveness against bacteria grown in multi-species biofilms did not correlate with planktonic susceptibility. Defined biofilm populations of mixed-species wound pathogens could be maintained in the basal perfusion model, facilitating the efficacy testing of treatments regimens and potential dressings against multi-species biofilms composed of wound isolates.
Prevention of wound infections is a challenge in clinical practice. The aim of this study was to assess the efficacy of polihexanide 0.04 % on acute traumatic wounds. It was a randomised, double-blind, placebo-controlled prospective trial which included 61 patients. The polihexanide group showed a significant decrease in log10 CFU (p<0.001) after 60 min treatment in comparison to baseline CFU, whereas the Ringer's solution group did not show a significant change of CFU during 60 min treatment. Treatment of polihexanide 0.04% resulted in a significant reduction of bacterial load in acute traumatic wounds.
Objective:
The influence of proteins on the efficacy of antiseptic solutions has been rarely investigated even though exudate can contain high levels of protien. The aim of this study was to analyse the antibacterial efficacy of commonly used solutions in the presence of albumin protein.
Method:
Using Staphylococcus aureus in a standardised quantitative suspension assay, the antibacterial effects of poly (1-(2-oxo-1-pyrrolidinyl) ethylene)-iodine (PVP-I) and octenidin-dihydrochloride/phenoxyethanol (OCT/PE) were analysed in the presence of 0-3% bovine serum albumin (BSA). These were compared with previous results obtained with polyhexamethylene biguanide hydrochloride (PHMB).
Results:
Presence of albumin caused a significant (p<0.001) decrease in antibacterial effect in the analysed solutions. The concentrations of albumin that provoked highly significant decreases in the bacterial reduction factors of the study agents were: 0.01875 % for PVP-I, followed by 0.75 % for OCT/PE. After addition of 3 % albumin, adequate antimicrobial effects were ensured for titrations to 5 % PVP-I and 8 % OCT/PE. As we could show before, it is not possible to titrate PHMB in order to assure adequate potency.
Conclusion:
This study demonstrates that albumin induces a significant decrease of the antibacterial potency of the analysed solutions.