Conference Paper

Energy Consumption of NFV-MEC-Based 6G Networks Supporting Different Services

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
Multi-access edge computing (MEC) is capable of meeting the challenging requirements of next-generation networks, e.g., 6G, as a benefit of providing computing and caching capabilities in the close proximity of the users. However, the traditional MEC architecture relies on specialized hardware and its bespoke software functions are closely integrated with the hardware, hence it is too rigid for supporting the rapidly evolving scenarios in the face of the demanding requirements of 6G. As a remedy, we conceive the compelling concept of open-source cellular networking and intrinsically amalgamate it with MEC, which is defined by open-source software running on general-purpose hardware platforms. Specifically, an open-source MEC (OS-MEC) scheme is presented relying on a pair of core principles: the decoupling of the MEC functions and resources from each other with the aid of network function virtualization (NFV); as well as the reconfiguration of the disaggregated MEC functions and resources into customized edge instances. This philosophy allows operators to adaptively customize their users' networks. Then, we develop improved networking functions for OS-MEC decoupling and discuss both its key components as well as the process of OS-MEC reconfiguration. The typical use cases of the proposed OS-MEC scheme are characterized with the aid of a small-scale test network. Finally, we discuss some of the potential open-source-related technical challenges when facing 6G.
Article
Full-text available
The 5G wireless communication network is currently faced with the challenge of limited data speed exacerbated by the proliferation of billions of data-intensive applications. To address this problem, researchers are developing cutting-edge technologies for the envisioned 6G wireless communication standards to satisfy the escalating wireless services demands. Though some of the candidate technologies in the 5G standards will apply to 6G wireless networks, key disruptive technologies that will guarantee the desired quality of physical experience to achieve ubiquitous wireless connectivity are expected in 6G. This article first provides a foundational background on the evolution of different wireless communication standards to have a proper insight into the vision and requirements of 6G. Second, we provide a panoramic view of the enabling technologies proposed to facilitate 6G and introduce emerging 6G applications such as multi-sensory-extended reality, digital replica, and more. Next, the technology-driven challenges, social, psychological, health and commercialization issues posed to actualizing 6G, and the probable solutions to tackle these challenges are discussed extensively. Additionally, we present new use cases of the 6G technology in agriculture, education, media and entertainment, logistics and transportation, and tourism. Furthermore, we discuss the multi-faceted communication capabilities of 6G that will contribute significantly to global sustainability and how 6G will bring about a dramatic change in the business arena. Finally, we highlight the research trends, open research issues, and key takeaway lessons for future research exploration in 6G wireless communication.
Conference Paper
Full-text available
Virtualization is growing rapidly as a result of the increasing number of alternative solutions in this area, and of the wide range of application field. Until now, hypervisor-based virtualization has been the de facto solution to perform server virtualization. Recently, container-based virtualization – an alternative to hypervisors – has gained more attention because of lightweight characteristics, attracting cloud providers that have already made use of it to deliver their services. However, a gap in the existing research on containers exists in the area of power consumption. This paper presents the results of a performance comparison in terms of power consumption of four different virtualization technologies: KVM and Xen, which are based on hypervisor virtualization, Docker and LXC which are based on container virtualization. The aim of this empirical investigation, carried out by means of a testbed, is to understand how these technologies react to particular workloads. Our initial results show how, despite of the number of virtual entities running, both kinds of virtualization alternatives behave similarly in idle state and in CPU/Memory stress test. Contrarily, the results on network performance show differences between the two technologies.
Article
The sixth generation (6G) mobile telecommunication will become a reality around 2030. Several research initiatives have started preliminary and conceptual work worldwide. Similarly to previous mobile communication generations, the Radiocommunication sector of the International Telecommunication Union (ITU-R) has a fundamental leadership role of defining framework and overall objectives of the new mobile communication generation, named IMT-2030, as well as developing global specifications of its radio interface.
Article
Ultra-Reliable and Low Latency Communications (URLLC) is a Fifth Generation (5G) or Beyond(B) 5G of Mobile Networks service that presents strict reliability and latency requirements. Multi-Access Edge Computing (MEC) and Network Function Virtualization (NFV) emerge as essential solutions since they allow network applications/functions to be virtualized and hosted closer to the end-user, improving reliability and latency. However, they may incur delay overheads (e.g., resource setup delay, failure events) to the dynamic resource provisioning that may impair the URLLC, which must be considered in the MECNFV node setting. This work addresses the resource provisioning for URLLC services in MEC-NFV-based networks, considering the Virtualized Network Function (VNF) setup time, failure occurrence and resource pre-initialization. A queue-based model is proposed to analyze the MEC-NFV node configuration in terms of average response time, blocking probability, and average number of active resources, under different service arrival and resource setup rates, maximum system capacity, number of resources and pre-initialized ones are carried out. The results show that the resource pre-initialization may mitigate the negative effect of the lower VNF setup rate.
Article
While 5G is being deployed all around the world, the industry and academia start the investigation of 6G. Network function virtualization (NFV) is seen as the key enabler towards the flexible resource management and sharing of 6G networks. The main idea of NFV is to decouple the physical devices from the specific functions that run on them. In NFV, virtual network service (NS) is modeled as a service function chain (SFC). The challenges in SFC description, composition, embedding, and scheduling are key issues in NFV. In this paper, we focus on the joint SFC embedding and scheduling for NFV in 6G networks. With the assistance of sensing the physical node resource abilities, we propose a novel SFC embedding and scheduling algorithm, which is named as RA-SFC-6G. A new service is first composed as an SFC which is an ordered sequence of virtual network functions (VNFs). Afterwards, our RA-SFC-6G algorithm will select the physical nodes with stronger resource abilities and abundant resources to accommodate the SFC. In addition, the NS is guaranteed to be implemented without violating the NS maximum allowed scheduling time. If violated, our RA-SFC-6G can re-embed and re-schedule the violated VNFs to suitable positions. In order to validate our RA-SFC-6G performance, we do the experiment work. Experiment results show that our RA-SFC-6G achieves at least 10% higher SFC acceptance ratio than the previous counterparts and the typical heuristics.
Article
The innovations provided by sixth generation wireless communication (6G) as compared to fifth generation (5G) are considered in this article based on analysis of related works. With the aim of achieving diverse performance improvements for the various 6G requirements, five 6G core services are identified. Two centricities and eight key performance indices (KPIs) are detailed to describe these services, then enabling technologies to fulfill the KPIs are discussed. A 6G architecture is proposed as an integrated system of the enabling technologies and is then illustrated using four typical urban application scenarios. Potential challenges in the development of 6G technology are then discussed and possible solutions are proposed. Finally, opportunities for exploring 6G are analyzed in order to guide future research.
Article
In the last few years, we have witnessed the huge popularity of one of the most promising technologies of the modern era: the Internet of Things. In IoT, various smart objects (smart sensors, embedded devices, PDAs, and smartphones) share their data with one another irrespective of their geographical locations using the Internet. The amount of data generated by these connected smart objects will be on the order of zettabytes in the coming years. This huge amount of data creates challenges with respect to storage and analytics given the resource constraints of these smart devices. Additionally, to process the large volume of information generated, the traditional cloud-based infrastructure may lead to long response time and higher bandwidth consumption. To cope up with these challenges, a new powerful technology, edge computing, promises to support data processing and service availability to end users at the edge of the network. However, the integration of IoT and edge computing is still in its infancy. Task scheduling will play a pivotal role in this integrated architecture. To handle all the above mentioned issues, we present a novel architecture for task selection and scheduling at the edge of the network using container-as-a-service (CoaaS). We solve the problem of task selection and scheduling by using cooperative game theory. For this purpose, we developed a multi-objective function in order to reduce the energy consumption and makespan by considering different constraints such as memory, CPU, and the user's budget. We also present a real-time internal and external container migration technique for minimizing the energy consumption. For task selection and scheduling, we have used lightweight containers instead of the conventional virtual machines to reduce the overhead and response time as well as the overall energy consumption of fog devices, that is, nano data centers (nDCs). Our empirical results demonstrate that the proposed scheme reduces the energy consumption and the average number of SLA violations by 21.75 and 11.82 percent, respectively.
Article
In the present scenario, an energy efficiency has become a matter of prime importance for wireless networks. To meet the demands of an increased capacity, an improved data rate, and a better quality of the service of the next-generation networks, there is a need to adopt energy-efficient architectures. Along with these requirements, it is also our social responsibility to reduce the carbon footprint by reducing the power consumption in a wireless network. Hence, a green communication is an urgent need. In this paper, we have surveyed various techniques for the power optimization of the upcoming 5G networks. The primary focus is on the use of relays and small cells to improve the energy efficiency of the network. We have discussed the various scenarios of relaying for the next-generation networks. Along with this, the importance of simultaneous wireless power and information transfer, massive multiple input multiple output, and millimeter waves has been analyzed for 5G networks.
Breaking the energy curve: Why service providers should care about 5G energy efficiency
  • B Joshi
B. Joshi, Breaking the energy curve: Why service providers should care about 5G energy efficiency, Feb. 2019, Available: https://www.ericsson.com/en/blog/2019/2/breaking-the-energy-curve-5g-energy-efficiency.