Article

Identifying imaging challenges for 1D and 3D geometric complexity (LG space)

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

Abstract

In some situations, it is difficult to image seismic data even when factors such as illumination, anisotropy, and attenuation are resolvable. An often-overlooked but dominant factor affecting imaging is the geometric complexity of subsurface reflectors. In some of these settings, we propose that geometric complexity plays a dominant role in the quality of seismic imaging. This has been documented in subsalt regions with poor image quality where 3D vertical seismic profiles (VSPs) are available. VSPs often demonstrate that there is good illumination below salt, but the complexity of the observed downgoing wave and diffractions cannot be simulated with smooth earth models. We use synthetic examples with high geometric complexity and no other complications to analyze the imaging process: a 2D sediment-salt model with rough salt-top topography, and a 1D model with complex reflectivity. In these models, it is difficult to estimate velocity, and it is challenging to image the data. These synthetic examples are useful to understand the limitations of imaging with smooth models, to create guidelines to identify geometric complexity in field data, and to develop possible mitigations to improve imaging. Further real data examples will be needed to test geometric complexity.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
Even after sophisticated processing, land seismic data in complex areas exhibit weak and distorted prestack reflections with low coherency. Usually, the local stacking methods reveal clear reflections. However, the absolute level of amplitude spectra after such stacking experiences a substantial decline across the entire frequency band, reaching-10-25 dB. In addition, stacking leads to a significant and progressive loss of higher frequencies. We describe mathematical and intuitive physical models for multiplicative noise that could consistently explain these field observations at least semi-quantitatively. Multiplicative noise is represented by random timeshifts (residual statics) and random phase perturbations different for each frequency. Residual statics explains the progressive loss of higher frequencies. On the other hand, phase perturbations lead to a severe loss of coherency on prestack gathers and produce a strong downward bias or loss of broadband amplitudes after stacking. We show that both types of multiplicative noise can be physically generated by near-surface scattering layers with small-to-medium-scale geological heterogeneities. We speculate that such multiplicative distortions can be referred to as seismic speckle noise well established in optics and ultrasonics. Furthermore, we derive fundamental properties of how random multiplicative noise transforms Geophysics 3 while stacking. The first essential finding reveals that stacking produces an unbiased estimate of the clean signal phase. The second finding shows the mathematical relationship between the frequency-dependent loss of stacked amplitude and the standard deviation of residual statics and phase perturbations. These findings serve as a theoretical justification for previously proposed methods of phase substitution and phase corrections and open the way to efficiently address random multiplicative noise in seismic processing.
Article
Full-text available
Determinism is generally regarded as one of the main characteristics of classical physics, that is, the physics of the eighteenth and nineteenth century. However, an inquiry into eighteenth and nineteenth century physics shows that the aim of accounting for all phenomena on the basis of deterministic equations of motion remained far out of reach. Famous statements of universal determinism, such as those of Laplace and Du Bois-Reymond, were made within a specific context and research program and did not represent a majority view. I argue that in this period, determinism was often an expectation rather than an established result, and that especially toward the late nineteenth and early twentieth century, it was often thought of as a presupposition of physics: physicists such as Mach, Poincaré and Boltzmann regarded determinism as a feature of scientific research, rather than as a claim about the world. It is only retrospectively that an image was created according to which classical physics was uniformly deterministic.
Article
Full-text available
The goal of inversion is to estimate the model which generates the data of observations with a specific modeling equation. One general approach to inversion is to use optimization methods which are algebraic in nature to define an objective function. This is the case for objective functions like minimizing RMS of amplitude, residual traveltime error in tomography, cross correlation and sometimes mixing different norms (e.g. L1 of model + L2 of RMS error). Algebraic objective function assumes that the optimal solution will come up with the correct geometry. It is sometimes difficult to understand how one number (error of the fit) could miraculously come up with the detail geometry of the earth model. If one models the earth as binary rock parameters (only two values for velocity variation), one could see that the geometry of the rugose boundaries of the geobodies might not be solvable by inversion using algebraic objective function.
Article
Quantitative methods are more familiar to most geophysicists with direct inversion or indirect inversion. We will discuss seismic inversion in a high level sense without getting into the actual algorithms. We will stay with meta-equations and argue pros and cons based on certain mathematical theorems.
Conference Paper
3D VSP data provides a unique opportunity to improve image resolution and fault definition in the vicinity of a well. However, the processing and imaging of VSP data requires special accommodations for its distinctive acquisition geometry. In this abstract, we demonstrate two key VSP pre-processing steps that greatly impacted the final image from the Mad Dog 3D VSP data, including XYZ vector field reorientation based on 3D elastic finite-difference modelling, and shot-to-shot directional de-signature using near field hydrophone data. We also discuss how utilizing the multiple energy - in addition to primary - extends our capability to image the shallow overburden. Presentation Date: Thursday, October 20, 2016 Start Time: 8:30:00 AM Location: 146 Presentation Type: ORAL
Conference Paper
Wave equation migration can usually produce high-quality images below complex overburden given sufficient data and an accurate velocity model. However, inaccurately estimated high-contrast, short-wavelength, buried velocity anomalies disrupt the images of seismic reflections from deeper layers. Currently we solve this problem by building velocity models either with tomographic techniques or interpretation-based techniques. Existing velocity model construction methods based on interpretation and insertion of complex model boundaries are time consuming, tedious to implement, and error-prone. More-automated velocity model construction methods such as tomography (Stork, 1992), wave equation migration velocity analysis (Biondi and Sava, 1999) and FWI (Sirgue and Pratt, 2003) tend not to have enough resolution to define boundaries with sufficient sharpness, or may not have sufficient depth of investigation to handle very complex velocity boundaries at arbitrary locations in the model. Velocity anomalies that are rapidly varying in space have similarity to one of the problems encountered in ground-based optical astronomy. Resolution and accuracy of astronomical images is often limited by “atmospheric seeing”, the temporal and spatial variation in the speed of light due to localized temperature-induced density differences in air. In optical astronomy this problem is addressed by physically adjusting optical elements or “adapting” the optical imaging system to remove the phase errors in the wavefronts before they reach the imaging sensor (Beckers, 1993). We suggest a similar approach for the problem of short-wavelength velocity anomalies for seismic waves. We adaptively sense seismic wavefront errors during the wave propagation calculations in migration, and adjust the seismic imaging system either by applying phase/time shifts to the wavefield or by adjusting velocity boundaries automatically to improve seismic images below the complex velocity structure.
Conference Paper
Sound diffusive and scattering surfaces can be implemented in architectural spaces to improve the acoustical qualities of the space, particularly by attenuating the effects of harsh reflections and by producing a more diffuse sound field. These surfaces typically are effective only for a limited range of frequencies, dependent on the scale of the surface geometry. Given the broad frequency range of human hearing, an ideal diffuser would provide scattering across many frequencies. There is a direct relationship between surface roughness size and the wavelength of the scattered sound; therefore, scale-invariant fractal surfaces can be useful in achieving this ideal. In this study, virtual 1-D fractal surfaces have been generated using the Random Midpoint Displacement (RMD) algorithm. A BEM method to simulate the sound diffusive properties of these surfaces was developed and some preliminary results are presented.
Article
In deepwater regions of the Gulf of Mexico, the ability to image subsalt structures has improved significantly with wide-azimuth data, reverse time migration, and anisotropic tomography and imaging. However, subsalt imaging, such as imaging steeply dipping salt flanks and subsalt three-way closures, still remains difficult in areas with complex salt geometry. Moreover, limited subsalt illumination provides insufficient incident angles for residual curvature tomographic analysis. Full-azimuth and long-offset acquisition configurations are the latest acquisition technologies designed to address these subsalt challenges. An improved subsalt imaging and tomography updating using staggered acquisition provides full-azimuth data coverage and ultralong offsets.
Article
The definition of a fractal distribution is that the number of objects N with a characteristic size greater than r scales with the relation N ~ r −D . The frequency-size distributions for islands, earthquakes, fragments, ore deposits, and oil fields often satisfy this relation. Fractals were originally introduced by Mandelbrot to relate the length of a coastline to the length of the measuring stick. This application illustrates a fundamental aspect of fractal distributions, scale invariance. The requirement of an object to define a scale in photographs of many geological features is one indication of the wide applicability of scale invariance to geological problems, scale invariance can lead to fractal clustering. Geophysical spectra can also be related to fractals; these are self-affine fractals rather than self-similar fractals. Examples include the earth’s topography and geoid.
Book
The editors of this book chose a diverse spectrum of papers written by pioneers in the field of fractals and their application to the exploration and production of hydrocarbons. The geology of the Earth`s crust is complex, chaotic, and unpredictable. Fractal geometry can quantify the spatial heterogeneity of the different geologic patterns and ultimately help improve the results of both production and exploration. To this goal the book has accomplished such an objective with diverse, well-chosen contributions from a variety of experts in the field. The book starts with a chapter introducing the basics, with a short historical foot-note by Benoit Mandelbrot, who is considered the {open_quotes}father of fractals.{close_quotes} Mandelbrot emphasized that geologic processes not only exhibit fractal properties but also are strongly connected to the economic system. This paved the way for the next three chapters that deal with the size and spatial distribution of hydrocarbon reserves and their importance in economic evaluations. The following four chapters deal with the fractal processes as related to sedimentologic, stratigraphic, and geomorphologic systems. Chapter five is an interesting one that deals with stratigraphic models and how their fractal processes can be tied with the inter-well correlation and reconstruct depositional environments. The next three chapters are concerned with porous and fractured rocks and how they affect the flow of fluids. The last two chapters (chapters 13 and 14) are of particular interest. Chapter 13 deals with the vertical vs. horizontal well-log variability and application to fractal reservoir modeling. Chapter 14 illustrates how fractal geometry brings mathematical order to geological and geophysical disorder. This is evident when dealing with geophysical modeling and inversion.
Article
Modern seismic recording instruments allow precise measurements of the amplitude of reflected signals. Intuitively we would expect that this amplitude information could be used to increase our knowledge of the physical properties of the reflecting earth. The relevant factors defining the amplitude of a reflection signal are: spherical divergence, absorption, the reflection coefficient of the reflecting interface, the cumulative transmission loss at all interfaces above this, and the effect of multiple reflections. Of these factors, three—spherical divergence, the reflection coefficient and the transmission loss—are reasonably clear concepts (though the estimation of transmission loss from acoustic logs caused some difficulties in the hey-day of synthetic seismograms). Absorption still presents considerable problems of detail, but our understanding has increased significantly in recent years. The factor least well understood is undoubtedly the effect of multiple reflections. Multiple paths having an even number of bounces can have the effect of delaying, shaping and magnifying the pulse transmitted through a layered sequence. Simple demonstations of this phenomenon can be made using elementary thin plates, and these can be presented for various synthetic and real sequences of layers. Such demonstrations lead one to explore the relation between the spectrum of the transmitted pulse and the spectrum of the reflection coefficient series. If it were possible to isolate the amplitude and shape variations imposed by absorption within a layer, there would be a chance that this measure of absorption would be useful as a correlatable or diagnostic indication of rock properties. If it were possible to isolate the amplitude and shape variations imposed by multiple reflections, there would be a chance that this measure would be useful as an indication of cyclic sedimentation and of the dominant durations of the sedimentary cycles. However, the separation of these two effects constitutes a formidable challenge. The very difficulty of this separation suggests that it may be opportune to review the quantitative estimates of absorption made by field experiments.
End of mathematics: viXra preprint
  • A Lau
Method of datuming seismic data and method of processing seismic data
  • A Lau
The unreasonable expectation of mathematics: viXra preprint
  • A Lau