Conference Paper

Towards GHz Ultrasound Enabled Noninvasive Hydrogel Metrology for Mechanobiology

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
An aluminum nitride (AlN) piezoelectric micromachined ultrasound transducer (PMUT) array was proposed and fabricated for non-invasive radial artery stiffness monitoring, which could be employed in human vascular health monitoring applications. Using surface micromachining techniques, four hexagonal PMUT arrays were fabricated within a chip area of 3 × 3 mm2. The mechanical displacement sensitivity and quality factor of a single PMUT were tested and found to be 24.47 nm/V at 5.94 MHz and 278 (in air), respectively. Underwater pulse-echo tests for the array demonstrated a −3 dB bandwidth of 0.76 MHz at 3.75 MHz and distance detection limit of approximately 25 mm. Using the PMUT array as an ultrasonic probe, the depth and diameter changes over cardiac cycles of the radial artery were measured to be approximately 3.8 mm and 0.23 mm, respectively. Combined with blood pressure calibration, the biomechanical parameters of the radial artery vessel were extracted using a one-dimensional vascular model. The cross-sectional distensibility, compliance, and stiffness index were determined to be 4.03 × 10−3/mmHg, 1.87 × 10−2 mm2/mmHg, and 5.25, respectively, consistent with the newest medical research. The continuous beat-to-beat blood pressure was also estimated using this model. This work demonstrated the potential of miniaturized PMUT devices for human vascular medical ultrasound applications.
Article
Full-text available
The ultrahigh-frequency (UHF) ultrasonic transducers are active in various fields, including nondestructive evaluation in the semiconductor industry, microscopic biological organization imaging in biomedicine, particle manipulation, and so on. In these fields ultrahigh-frequency (UHF) ultrasonic transducers play a critical role in the performance of related equipment. This article will focus on the topic of ultrahigh-frequency ultrasonic transducers’ preparation, and reviews three aspects: material selection, focus design, and acoustic energy transmission matching. Provides a summary of the current research status, and puts forward some views on the future development of UHF ultrasound devices.
Conference Paper
Full-text available
Plant parasitic nematodes are soil-borne microscopic worms that parasitize plant roots, reducing cropy ields for economically important crops such as soybeans, sugarbeets, and strawberries, to name a few. This paper presents the concept of using a GHz ultrasonic imaging array to image nematodes, as a way to quantify nematode populations within soil. A 128-pixel by 128-pixel, 1.85 GHz monolithic CMOS integrated ultrasonic imager was successfully used to image nematodes in moist soil, air, and thin layers of water
Article
Full-text available
Hydrogels have been used as substrates for studying the cellular processes by many researchers. The stiffness of such gels was also characterized previously. However, in most of the cases, these soft Poisson's ratio was assumed incompressible and Poisson’s ratio is assumed to be one-half. This may not be true in many cases, and might alter the calculation of the stiffness of the gels. In this study, we present equations for the complete characterization of soft media, i.e., calculation of Young’s modulus, shear modulus, and Poisson’s ratio. The method involves the individual measurement of either the displacement or rotation of cylindrical rods embedded in the soft media, under the application of an external force or torque. Equations involving shear modulus and Poisson’s ratio for rotation of the rod and Young’s modulus and Poisson’s ratio for the displacement of the rod are independently derived. In addition, the displacement and rotation of the rods embedded in an elastic medium, under the application of either a force or a torque, respectively, were also calculated using finite element analysis. These values compared well with the displacements and rotations obtained using closed form equations.
Conference Paper
Compressional deformation in fluids and rocks is influenced by similar viscoelastic effects, as in shear case. In this paper we introduce the importance of bulk viscosity and modulus in frequency-dependent response of elastic velocities. We conducted experiments to measure bulk modulus and attenuation of two heavy-oil saturated rock samples by confining pressure cycling method under varying oscillation frequencies (within teleseismic frequency band 0.001 - 1 Hz), and compared these measurements to a more conventional axial stress-strain technique. We plan to extend the frequency range of the pressure cycling apparatus as well as to modify the setup in order to measure frequency-dependent bulk viscosities of viscoelastic fluids. Presentation Date: Thursday, October 20, 2016 Start Time: 8:30:00 AM Location: 150 Presentation Type: ORAL
Article
Hydrogels are increasingly employed as multidimensional cell culture platforms often with a necessity that they respond to or control the cellular environment. Specifically, synthetic hydrogels, such as poly(ethylene glycol) (PEG)-based gels, are frequently utilized for probing the microenvironment's influence on cell function, as the gel properties can be precisely controlled in space and time. Synthetically tunable parameters, such as monomer structure and concentration, facilitate initial gel property control, while incorporation of responsive degradable units enables cell- and/or user-directed degradation. Such responsive gel systems are complex with dynamic changes occurring over multiple time-scales, and cells encapsulated in these synthetic hydrogels often experience and dictate local property changes profoundly different from those in the bulk material. Consequently, advances in bulk and local measurement techniques are needed to monitor property evolution quantatively and understand its effect on cell function. Here, recent progress in cell-responsive PEG hydrogel synthesis and mechanical property characterization is reviewed.