Article

Automatic grid refinement for thin material layer etching in process TCAD simulations

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

Abstract

Thin material layers are common structures in modern semiconductor device fabrication and are particularly necessary for light-emitting diodes and three-dimensional NAND memory devices. Such layers are not only deposited on the flat wafer surface but are also partially removed during subsequent etching steps. Level-set based process TCAD simulations are capable of representing flat thin material layers, such as those occurring after deposition, with sub-grid accuracy. However, topographical changes during etching processes modeled via Boolean operations expose the low underlying grid resolution, leading to detrimental artifacts. We present a novel algorithm that analyzes the thickness of all material layers and derives a refined target resolution for local regions of thin layers affected by the etching process. This allows to accurately represent topographical changes in thin layers by hierarchically refining the grid without unnecessary refinement in unaffected regions of the domain. We simulate the fabrication of a light-emitting diode device using our algorithm to automatically predict the optimal resolution for all etched material layers. Our algorithm selects efficient refinement factors to obtain the local target resolutions of the hierarchical grids, and achieves a three times faster computation time than a benchmark refinement algorithm based on topographical features.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
We present a feature detection method for adaptive grid refinement in hierarchical grids used in process technology computer-aided design topography simulations based on the local curvature of the wafer surface. The proposed feature detection method enables high-accuracy simulations whilst significantly reducing the run-time, because the grid is only refined in areas with high curvatures. We evaluate our feature detection method by simulating selective epitaxial growth of silicon-germanium fins in narrow oxide trenches. The performance and accuracy of the simulation is assessed by comparing the results to experimental data showing good agreement.
Article
Full-text available
3D NAND is a great architectural innovation in the field of flash memory. The staircase for control gate is a unique and important process in the manufacturing of 3D NAND. The staircase is employed to form the electrical connection between the control gate and contact. The current method used to measure the dimension of staircase patterns is, however, not precise enough for the development of state-of-the-art 3D NAND. In this circumstance, an accurate measurement of dimension for as-formed staircase patterns is of great importance and technical interest. In this paper, an improved measurement method is proposed to meet the requirement for higher precision. By taking the overlay into account, a calculation formula for measuring the dimensional error of as-formed staircase is derived for the first time. Two kinds of anchor design (convex SS0 and concave SS0) are put forward to perform dedicated experiments. Achieved results show that the measurement error of as-formed staircase using this improved method is improved from 31.6 nm for normal measurement method to 14.1 nm. The dimensional uniformity of as-formed staircase is therefore improved significantly which in turn leads to well controlled word line leakage. Furthermore, in advanced staircase structure of stair divided scheme (SDS), the convex SS0 shows an advantage in cost compared to the concave SS0.
Article
Full-text available
We demonstrate a color-tunable smart display system based on a micropixelated light-emitting diode (muhboxLED)(muhbox{LED}) array made from one InGaN epitaxial structure with high (0.4) indium mole fraction. When integrated with custom complementary metal–oxide–semiconductor (CMOS) electronics and a CMOS driving board with a field-programmable gate array (FPGA) configuration, this muhboxLEDmuhbox{LED} device is computer controllable via a simple USB interface and is capable of delivering programmable dynamic images with emission colors changeable from red to green by tailoring the current densities applied to the muhboxLEDmuhbox{LED} pixels. The color tunability of this CMOS-controlled device is attributed to the competition between the screening of piezo-electric field and the band filling effect. Comparable brightness of the muhboxLEDmuhbox{LED} pixels emitting at different colors was achieved by adjusting the duty cycle. Further measurement suggests that this microdisplay system can also be used for high-speed visible light communications.
Article
Micro light-emitting diode (micro-LED) display, mainly based on inorganic GaN-based LED, is an emerging technique with high contrast, low power consumption, long lifetime and fast response time compared to liquid crystal display (LCD) and organic light-emitting diode (OLED) display. Therefore, many research institutes and companies have conducted in-depth research on micro-LED in the full-colour display, gradually realizing the commercialization of micro-LED. And the current research results of micro-LED indicate that it can be widely used in display, visible light communication (VLC), biomedicine and other fields. Although micro-LED has broad commercial prospects, it still faces great challenges, such as the effect of size reduction on performance, the realization of high-density integration on a single wafer for independent addressing of full-colour micro-LED display, the improvement of repair technique and yield, et al. This paper reviews the key solutions to the technical difficulties of the full-colour micro-LED display. Specifically, this review analyzes and discusses a variety of advanced full-colour micro-LED display techniques with a focus on three aspects: growth technique, transfer printing technique and colour conversion technique. This review demonstrates the opportunities, progress and challenges of these techniques, aiming to guide the development of full-colour micro-LED display.
Article
We devise new numerical algorithms, called PSC algorithms, for following fronts propagating with curvature-dependent speed. The speed may be an arbitrary function of curvature, and the front also can be passively advected by an underlying flow. These algorithms approximate the equations of motion, which resemble Hamilton-Jacobi equations with parabolic right-hand sides, by using techniques from hyperbolic conservation laws. Non-oscillatory schemes of various orders of accuracy are used to solve the equations, providing methods that accurately capture the formation of sharp gradients and cusps in the moving fronts. The algorithms handle topological merging and breaking naturally, work in any number of space dimensions, and do not require that the moving surface be written as a function. The methods can be also used for more general Hamilton-Jacobi-type problems. We demonstrate our algorithms by computing the solution to a variety of surface motion problems.
Article
We present fast methods to describe the surface evolution of large three-dimensional structures. Based on the sparse field level set method and the hierarchical run-length encoding level set data structure optimal figures for the computation time and for the memory consumption are achieved. Furthermore, we introduce a new multi-level-set technique, which is able to incorporate multiple material regions, and which can also handle material specific surface speeds accurately. We also describe an optimal algorithm for the visibility check for unidirectional etching. The presented techniques are demonstrated on various examples.
Article
A fast marching level set method is presented for monotonically advancing fronts, which leads to an extremely fast scheme for solving the Eikonal equation. Level set methods are numerical techniques for computing the position of propagating fronts. They rely on an initial value partial differential equation for a propagating level set function and use techniques borrowed from hyperbolic conservation laws. Topological changes, corner and cusp development, and accurate determination of geometric properties such as curvature and normal direction are naturally obtained in this setting. This paper describes a particular case of such methods for interfaces whose speed depends only on local position. The technique works by coupling work on entropy conditions for interface motion, the theory of viscosity solutions for Hamilton-Jacobi equations, and fast adaptive narrow band level set methods. The technique is applicable to a variety of problems, including shape-from-shading problems, lithographic development calculations in microchip manufacturing, and arrival time problems in control theory.