Conference Paper

Enhancing Uplink Performance of NR RedCap in Industrial 5G/B5G Systems

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
This paper describes and investigates a novel concept of frequency-domain spectral shaping (FDSS) with spectral extension for the uplink (UL) coverage enhancement in 5G New Radio (NR), building on discrete Fourier transform spread orthogonal frequency-domain multiplexing (DFT-s-OFDM). The considered FDSS concept is shown to have large potential for reducing the peak-to-average-power ratio (PAPR) of the signal, which directly impacts the feasible maximum transmit power under practical nonlinear power amplifiers (PAs) while still meeting the radio frequency (RF) emission requirements imposed by the regulations. To this end, the FDSS scheme with spectral extension is formulated, defining filter windows that fit to the 5G NR spectral flatness requirements. The PAPR reduction capabilities and the corresponding maximum achievable transmit powers are evaluated for a variety of bandwidth allocations in the supported 5G NR frequency ranges 1 and 2 (FR1 and FR2) and compared to those of the currently supported waveforms in 5G NR, particularly π/2-BPSK with FDSS without spectral extension and QPSK without FDSS. Furthermore, an efficient receiver structure capable of reducing the noise enhancement in the equalization phase is proposed. Finally, by evaluating the link-level performance, together with the transmit power gain, the overall coverage enhancement gains of the method are analyzed and provided. The obtained results show that the spectrally-extended FDSS method is a very efficient solution to improve the 5G NR UL coverage clearly outperforming the state-of-the-art, while being also simple in terms of computational complexity such that the method is implementation feasible in practical 5G NR terminals.
Article
Full-text available
The fifth-generation (5G) wireless technology is primarily designed to address a wide range of use cases categorized into the enhanced mobile broadband (eMBB), ultra-reliable and low latency communication (URLLC), and massive machine-type communication (mMTC). Nevertheless, there are a few other use cases that are in-between these main use cases such as industrial wireless sensor networks, video surveillance, or wearables. In order to efficiently serve such use cases, in Release 17, the 3rd generation partnership project (3GPP) introduced the reduced capability NR devices (NR-RedCap) with lower cost and complexity, smaller form factor, and longer battery life compared to regular NR devices. However, one key potential consequence of device cost and complexity reduction is coverage loss. In this paper, we provide a comprehensive evaluation of NR RedCap coverage for different physical channels and initial access messages to identify the channels/messages that are potentially coverage limiting for RedCap UEs. We perform the coverage evaluations for RedCap UEs operating in three different scenarios, namely Rural, Urban and Indoor with carrier frequencies 0.7 GHz, 2.6 GHz and 28 GHz, respectively. Our results confirm that for all the considered scenarios, the amounts of required coverage recovery for RedCap channels are either less than 1 dB or can be compensated by considering smaller data rate targets for RedCap use cases.
Article
Full-text available
Rising popularity of 5G communications is making tremendous demands on the cellular network operators for providing true 5G services to the users. With limited numbers of 5G users initially, the investments for 5G services can be very high. In the early stage of 5G deployments, the 5G cells would not be lavishly spread and there would be 5G coverage holes. The operators can provide seamless services to the 5G users by inter working with the existing 4G Long-Term Evolution (LTE) network. The 5G inter working with fully deployed LTE would not only provide fast and seamless coverage but would also provide economic viability to the network operators. In this paper we survey and consolidate the 4G-5G inter working solutions that can assist in attaining the insight about various inter working possibilities and their challenges. It is important that a network operator is able to optimize its deployed infrastructure while being able to guarantee fast and seamless transition to 5G for its subscribers. To this regard, we evaluate the performance and radio resource management challenges for different 4G-5G dual connectivity options proposed by 3rd Generation Partnership Project (3GPP) standardization. We also discuss spectrum sharing possibilities between 4G and 5G wireless networks. Finally, various research challenges and discussions on path for migration to 5G standalone networks are also presented.
Article
Full-text available
How to support massive access efficiently is one of the challenges in the future Internet of Things (IoT) systems. To address such challenge, this paper proposes an effective preamble collision resolution scheme to sustain massive random access (RA) for an IoT system. Specifically, a new sub-preamble structure is first proposed to reduce the preamble collision probability. To identify different devices that send the same preamble to the gNB on the same physical random access channel (PRACH), a multiple timing advance (TA) capturing scheme is then proposed. Thereafter, an RA scheme is designed to sustain massive access and the performance of the scheme is studied analytically. Finally, the effectiveness of the proposed RA scheme is validated by extensive simulation experiments in terms of preamble detection probability, preamble collision probability, RA success probability, resource efficiency and TA capturing.
Article
Full-text available
In order to achieve up to 1 Gb/s peak data rate in future IMT-Advanced mobile systems, carrier aggregation technology is introduced by the 3GPP to support very-high-data-rate transmissions over wide frequency bandwidths (e.g., up to 100 MHz) in its new LTE-Advanced standards. This article first gives a brief review of continuous and non-continuous CA techniques, followed by two data aggregation schemes in physical and medium access control layers. Some technical challenges for implementing CA technique in LTE-Advanced systems, with the requirements of backward compatibility to LTE systems, are highlighted and discussed. Possible technical solutions for the asymmetric CA problem, control signaling design, handover control, and guard band setting are reviewed. Simulation results show Doppler frequency shift has only limited impact on data transmission performance over wide frequency bands in a high-speed mobile environment when the component carriers are time synchronized. The frequency aliasing will generate much more interference between adjacent component carriers and therefore greatly degrades the bit error rate performance of downlink data transmissions.
Article
Industrial digital transformation through efficient automation hinges largely on the deployment of communication infrastructures that meet the requirements of smart factory use cases. These infrastructures involve multiple devices that utilize different communication technologies to increase the overall operational efficiency. Rooting from the key implementation requirements of a smart factory environment, this article focuses on the role of cellular connectivity and wearable technology in enabling new industrial applications. Specifically, we shed light on a novel category of services - industrial mid-end wearable applications - by positioning their requirements among the 5G service classes. We then identify features that can complement cellular connectivity to further support the given requirements. More precisely, we review cellu-lar-network-aided device-to-device communications and reduced-capability devices. Our performance evaluation results justify the choice of these features and show that they can work in concert with cellular connectivity to enhance spectral efficiency and reliability in industrial mid-end wearable applications.
Article
The fifth-generation mobile initiative, 5G, is a tremendous and collective effort to specify, standardize, design, manufacture, and deploy the next cellular network generation. 5G networks will support demanding services such as enhanced Mobile Broadband, Ultra-Reliable and Low Latency Communications and massive Machine-Type Communications, which will require data rates of tens of Gbps, latencies of few milliseconds and connection densities of millions of devices per square kilometer. This survey presents the most significant use cases expected for 5G including their corresponding scenarios and traffic models. First, the paper analyzes the characteristics and requirements for 5G communications, considering aspects such as traffic volume, network deployments, and main performance targets. Secondly, emphasizing the definition of performance evaluation criteria for 5G technologies, the paper reviews related proposals from principal standards development organizations and industry alliances. Finally, well-defined and significant 5G use cases are provided. As a result, these guidelines will help and ease the performance evaluation of current and future 5G innovations, as well as the dimensioning of 5G future deployments.
Article
Industry 4.0 is a ubiquitous term throughout general newspapers, on company websites or in scientific journals. One of its key constructs is the smart factory, envisioned as a future state of a fully connected manufacturing system, mainly operating without human force by generating, transferring, receiving and processing necessary data to conduct all required tasks for producing all kinds of goods. Although the understanding of smart factory concepts has been sharpened in the last years, it is still difficult for industrial companies to establish a concrete strategy roadmap within the jungle of different terminologies, ideas and concepts. To generate further clarity and to consolidate the previous findings around smart factory for researchers as well as for practitioner, we conducted a systematic literature review. For this purpose, we chose a five steps approach: Scope definition, topic conceptualisation, literature search, literature analysis and synthesis, and synthesis of future research questions. During our review, we found that research within each perspective is fragmented and unequally advanced. Most publications treat single use cases with low generalizability, often rely upon machine data, typically have a technical nature and seldom incorporate impact estimations. In this paper, our key academic and practical contribution lies in the categorisation of the selected publications into eight thematic distinct perspectives within the sphere of smart factory: Decision making, cyber-physical systems, data handling, IT infrastructure, digital transformation, human machine interaction, IoT, and cloud manufacturing and services. These are further developed into the smart factory research model, stating a foundation for future research endeavors.
5G Wireless Evolution White Paper: Towards a Sustain-able 5G
  • H Yue