ArticlePDF Available

Abstract

Functional compounds are materials with mechanical integrity, whose functional properties can be achieved, enhanced or enhanced by a combination of two or more components. ... Non-functional carbon material and two-and three-dimensional materials. Energy conversion and storage materials and structures. Compounds are generally characterized compounds (CAMCs). Polymer Matrix-Polymer matrix compounds (PMC) can be divided into three subtypes: thermoses, thermoplastic and rubber. A polymer is a large molecule formed by repeating structural units bonded by covalent chemical bonds. Structural compounds are engraved products made of plastic, wood, glass or carbon fiber materials. Developed or extruded products have applications such as exterior floors, rails, fences, natural wood, cladding, sidewall, molding, trim and window or door frames. Structural compounds are engraved products made of plastic, wood, glass or carbon fiber materials. Developed or extruded products have applications such as exterior floors, rails, and fences, natural wood, cladding, sidewall, molding, trim and window or door frames. A particle is not a long dimension. Particle compounds the particles of one substance are scattered in the the second object team. Particles can have any shape and size, but generally spherical, a particle composite is classified as a group of suspended particles. Particles can have any shape, size or structure. Examples of well-known particle composites are concrete and particle board.
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 94
REST Journal on Emerging trends in Modelling andManufacturing
Vol: 7(3), 2021
REST Publisher
ISSN: 2455-4537
Website: www.restpublisher.com/journals/jemm
A study on Carbon Fiber Based Polymer Rein Force
composites
P.K.Chidambaram, Dr. Amol Lokhande, Dr. M. Ramachandran, M. Nathiya, G. Mathivanan
New Prince shri bhavani college of Engg. & Tech Chennai, Tamil Nadu, India.
School of Engineering and Technology, Sandip University. Maharashtra, India.
REST LABS, Kaveripattinam, Krishnagiri, Tamil Nadu, India.
Email: hodmech@newprinceshribhavani.com
Abstract
Functional compounds are materials with mechanical integrity, whose functional properties can be achieved, enhanced or
enhanced by a combination of two or more components. ... Non-functional carbon material and two- and three-dimensional
materials. Energy conversion and storage materials and structures. Compounds are generally characterized compounds
(CAMCs). Polymer Matrix - Polymer matrix compounds (PMC) can be divided into three subtypes: thermoses,
thermoplastic and rubber. A polymer is a large molecule formed by repeating structural units bonded by covalent chemical
bonds. Structural compounds are engraved products made of plastic, wood, glass or carbon fiber materials. Developed or
extruded products have applications such as exterior floors, rails, fences, natural wood, cladding, sidewall, molding, trim
and window or door frames. Structural compounds are engraved products made of plastic, wood, glass or carbon fiber
materials. Developed or extruded products have applications such as exterior floors, rails, and fences, natural wood,
cladding, sidewall, molding, trim and window or door frames. A particle is not a long dimension. Particle compounds the
particles of one substance are scattered in the the second object team. Particles can have any shape and size, but generally
spherical, a particle composite is classified as a group of suspended particles. Particles can have any shape, size or
structure. Examples of well-known particle composites are concrete and particle board.
Introduction
Structural compounds are engraved products made of plastic, wood, glass or carbon fiber materials. Developed or extruded
products have applications such as exterior floors, rails, and fences, natural wood, cladding, sidewall, molding, trim and
window or door frames. A particle is not a long dimension. Particle compounds the particles of one substance are scattered
in the The second object team. Particles can have any shape and size, but are usually spherical, elliptical, polygonal or
irregular in shape. Structural compounds are engraved products made of plastic, wood, glass or carbon fiber materials.
Developed or extruded products have applications such as exterior floors, rails, and fences, natural wood, cladding,
sidewall, molding, trim and window or door frames. Reinforced composites are the most widespread type of polymer
composite used today. This structure Materials use polymer matrix, fully bonded reinforcements; This without polymer
Reinforcements provide relatively poor mechanical properties. A particle is not a long dimension. Particle compounds the
particles of one substance are scattered in the matrix of the second substance. Particles can have any shape and size, but are
usually spherical, elliptical, polygonal or irregular in shape. A composite material has different physical and chemical
properties Is a combination of two ingredients. When they are connected, they are specific can improve strength and
rigidity by doing work. The compounds Have very high strength-to-weight ratios. The strength-to-weight ratio of any
material is its strength Is comparable to its weight. ... By combining specific resins and reinforcements, any You can create
a composite material to meet the specific strength of the application. Requirements. From two or more element materials.
Plywood-like composite wood. Reinforced plastics such as fiber-reinforced polymer or fiberglass. Compounds are now
used in vehicles and equipment, including panels, frames, interiors and other components. Some integrated infrastructure
applications include buildings, roads, bridges and piling. [8] The crystal phases of pure Fe-Fe 2 O 3 polyhedrons have
different GO weight ratios and are of three types The α-Fe 2 O 3 / GO mono hydrides are 5% and 10%, respectively. A
further 15% (named as 3-Fe 2 O. 3. GO 1, α-Fe 2 O 3 / GO 2, and α-Fe 2 O 3 / GO 3 were X-rayed, respectively. Were
examined by diffraction (XRD). Made by Crystallized. Fe 2 O 3 is the peak formed when nano polyhedrons combine with
oxide Change and other peaks are almost negligible, forming a mixture of α-Fe 2 O 3 and grapheme oxide. Structure and
crystalline-Fe 2 O 3nanoparticles. 24.0 °, 33.0 °, 35.5 °, 40.7 °, 49.3 °, 54.0 °, 57.6 °, 62.3 °, 63.9 °, 71.8 °, and 75.3
((1042) (13), (024), (024), respectively 116), (018), (214), (300), (1010), and (220) -Fe 2 O 3 Nocturnal crystalline planes
of polyhedrons. [51] Each sensitivity test was performed as shown in Figure 1a under a four-point curve. All sensors have
two mounting points Are located in between; Therefore, the bending moment provides them and the unloading cycles, the
latter gradually increasing until the beam with maximum load cycles fails. Resistance (strain or damage) ED For urine
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 95
sensitivity tests, the current between the external contacts is adjusted At 1 mA with AC / DC current source, the voltage
between the internal contacts using a digital Is measured, so the resistance can be calculated using the Ohm's law. [42] The
The crystal phases of pure Fe-Fe 2 O 3 polyhedrons have different GO weight ratios and the three types of α-Fe 2 O 3 /
GO monohybrids are 5%, 10% and 15%, respectively. Labeled (3-Fe 2 as O 3 GO 1, - Fe 2 O 3 / GO 2, and α-Fe 2 O 3 /
GO 3 were examined by X-ray diffraction (XRD), respectively. JCPDS 33- According to card 0664, all variants are
rhombohedra-Fe 2 O 3 phase. The peaks are all strong and show a sharp feature, i.e. all are well The peak change that
occurs when crystallized Fe 2 O 3 polyhedrons combine with graphene oxide has no effect on Fe 2 O 3 and the oxide
phase structure and crystallinity.24.0 °, 33.0 °, 35.5 °, 40.7 °, 49.3 °, 54.0 °, 57.6 °, 62.3 °, 63.9 °, 71.8 °, and 75.3
respectively and -Fe 2 O 3 Nocturnal crystalline planes of polyhedrons. [31] Texture Analyzer (SWICK) on images stored
in desiccators with previous drag tests mechanical properties of various materials are evaluated. At 20 ° C and 55% RH (in
MgNO3 saturated saline solution). For that purpose, the samples were stamped on the form of a dog bone (4 mm wide and
45 b) and Youngs modulus (E) b). Nominal strain mm cage length). During the break. The nominal pressure during the
break (determined from the pressure-strain curves. The force of fracture, calculated as the function of the length (in mm)
under the force curve (in N) from the total area, is 45 mm and 10 mm per minute, respectively. [30] Obviously, the
processing properties and geometric Features of ND, namely the shape, size and volume distribution of the primary
particles and aggregates, as well as its intrinsic surface and aggregate properties. These features compile NDs because they
are closely related to the methods used to link NDs in both laboratory and large business measurements and the structure
and properties of NDs. A brief overview of the different methods of production This section aims to provide an overview. .
Contains. Many excellent review articles are books and considering the book chapters, this section attempts to present only
general features that are useful in better understanding the processing and characteristics of NDs. PNDs. compounds. [37]
The The neighboring epoxy, MD model was separated using concentrated cylinders centered on the CNT axis. The mass
of each cylindrical shell area Density was determined. For each sample, 250 instantaneous times were considered as 100
PS NPT simulations. Density profiles 250 snapshots One density profile for each of the three epoxy systems Density was
estimated to obtain. Figure 3 (a) and (b) show the density profiles the equilibrium anchor attached models and the cross-
linked models, respectively. Spike density is about the same as carbon atoms at 4 CNT. CNT atoms airs over epoxy
Derwalls transmit power uniformly, the extracted part being the unique link between CNT and epoxy. Creating spaces. As
a result, the epoxy atoms are approx Have radiation gaps of 6 and higher. From about 7-8.5, the local density is higher than
the total Epoxy (1.2 g / cm3). Moving further from CNT, Surrounded by epoxy density total density, gradually decreasing
the range. [28] In electrochemistry, the design of new electrochemical sensors / biosensors can This can be achieved by
changing the surface of the electrode with different types hybrids with desirable analysis and electrochemical properties
(prefabricated / medium-carbon molecules, functional graphene and Au-based) [60] hybrid material-modified Were used
as common environmental sensitivities or bio sensing systems to monitor pollution.
Polymer Composites
[53] As a result, a series of four catalysts (used for H, / CO Fischer Tropsch reactions) were produced at the same support
(y-Fe, O,). They are described in Table 11. Fe, O,] Ni] Co] Cu was formed by the addition of copper to cobalt over nickel
over Fe, O. Fe, O,] Ni / Cu] Co (No. 3, Table 11). ) Was produced by the addition of nickel on Fe, O, followed by the
subtraction of copper on nickel and finally by the addition of cobalt. Fe, O,] Ni / Cu are formed by the addition of nickel
on Fe, O followed by the subtraction of copper. [30] This research article is based on recent achievements in the field of
PND compounds that emphasize the process-structure-property relationship. Accordingly, the structural and intrinsic
properties of ND are commercially reasonable Are first evaluated based on their ability to generate multifunctional PND.
Current achievements in surface transformation, especially those targeting only PNDs, have been reviewed to date Have
been provided. Different processing methods are offered. Detecting ND performance, morphology and effects of polymer /
ND interface Emphasis is given. Intermediate and processing conditions of various polymers currently being studied,
mechanical, thermal, abrasive, chemical properties and biocompatibility. Subsequently, the various applications of PNDs
are divided into structured and functional applications, and the manuscript is reviewed. Approved. Multifunctional PND is
first evaluated based on its creativity. Current achievements of surface change, in particular Of ND in the formation of
polymer compounds, targeting only the PNDs reviewed to date possible capabilities are discussed and future challenges
and opportunities are presented in this mix. [36] Polymer inkjet Printing and Direct-right Extrusion Based Technology-4 is
a powerful alternative For the 5 conventional technique mentioned. Other inkjet printing techniques in 6, low-viscosity
solutions Or polymer suspensions 7 are used for printing. Material. 10 layer-by-layer style. 11 [42] One layer after
printing, the surface of a leveling cylinder is leveled, which solidifies when cured under UV 12 light. Uses Photo-13
polymers Like other printing techniques the addition of non-abrasive resin has a viscosity and curing rate. 14 and the
resulting printed 15It can also affect the quality of parts. [47] SMPs are considered to have net points and molecular
switches. Net points can be formed by covalent bonds or molecular interactions. So, they are Chemical or physical in
nature. Chemical structure Cross-linked SMPs, referred to as r moseys, are the appropriate cross-link Can be achieved by
chemistry. Physically cross-linked refers to at least two separate thermoplastics, required Polymer morphology with
domains. The network chains of SMPs can be amorphous or crystalline, so the change temperature is the glass change
temperature or melting temperature. (DM) [18] Asbestos graphite interferometric alloy provided (GIC, Asbury 3494).
Carbons, Asbury, NJ, USA. (THF), 1-methyl-2-pyrolidone 99% (NMP), 4, 40-diamond (DDS) and (TIPA) were purchased
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 96
from Sigma Aldrich. Amin was used by Huntsman as a hardener (DGPEPA, CIPA-Epoxy, equivalent, purchased from
Australia) Figure 1 contains the molecular formulas of DTS and DGPEPA. [23] Epoxy resin suspensions with loads of 0.5,
1.0, 1.5, 2.0, 2.5 wt% were made of g-PS and 0.5 wt% loading pure PS powders. The powders in this work are not
imaginary). G-PS and Pure PS powders both stay moist at night without any interference with the epoxy resin. One hour
suspension (600 rpm, D2004W, Shanghai Mei Ying Instrument and Mei Ying Instrument and Mir Manufacturing Co. Ltd.)
25 o C. and electrical properties to be considered. Although the modulus of flexibility is slightly increased with the metal
fiber contents, it is significantly different in different materials as shown in Figure 4fDoes Is different. In addition, the
tensile strength does not differ significantly with the variation of the metal fiber content based on the test results. However,
EMI SE and attack strength show significant variation with metallic fiber contents. D.
Carbon Fiber
Their carbon number follows the linear trend of the Co / mesoH-ZSM-5 representative for ASF distribution. On the
contrary, the hydrocarbon distribution in Co / mesoH-ZSM-5 (w) does not follow this linear trend. ASF distribution is
roughly broken down into C13 molar fractions of most hydrocarbons are significantly reduced. These mesoH-ZSM-5 (w)
results clearly show that, according to the literature, olefin hydrocarbons formed near acid bases and co bases, i.e. cracking
and modernization, are promoted. [58] The Analysis of the results given, whether the concentration of the hardener is
equal to or less than a stoichiometric When lower, the increase in glass conversion temperature in nanocomposite is greater
than the initial event Lets decide that goes faster. Adhesive. However, at higher hardening, nanocomposite the glass
change temperature appears to be lower than the glass change temperature in the initial setting. Based on the analysis of
literature data and given dependencies can be concluded that the epoxy compounds with CNDs lead to an increase in the
magnitude of the change when not sufficiently curable (lack of sufficiently high temperature and hardening). Chemical
cross-linking to develop the most conventional network and thus glass-changing temperature development. When
complete change is achieved, the. [62] Fiber / size compatibility This is an important factor in the final measurement fiber /
matrix interface adhesion. However, in some cases the scattering of the measuring material in the polymer matrix has less
impact or their compatibility. May contain. Causing improved interface strength depending. From time to time, the
measuring functional groups are absorbed into the fiber surface, preventing it from dissolving in the polymer matrix during
composite production and Creates a weak fiber / matrix interface. The size growth of the fibers is a complex system. For
example, commercially available sizes for CF polyamide sizes are highly compatible with epoxy. Measurement application
for CF improves its abrasion resistance and bending strength. This reduces the CF compatibility with the polymer matrix.
Research to calculate binding agents for CF coatings to improve fiber / matrix adhesion at an important stage [63] ACFs
are used in a variety of absorption units. One of them is the corrugated paper spinning unit shown in Figure 1. Another A
molding technique to obtain the optimal configuration of the suction blocks for optimal contact between the ACF and the
flowing fluid of the reliable type Is to use. The most common use is fiber packed beds. In ACF filled beds, there is no
control of absorption kinetics internal particle diffusion, but the axial distribution in the fiber-filled beds. The axis scatter
coefficient in fiber beds is interrelated [64] During production the fibers are made by surface treatment with Thermosetting
(epoxy, polyester, phenolic, polyamide resins) or Thermoplastic (polypropylene, nylon 6.6, PMMA, PEEK) polymer
matrix. The fiber surface a is a It is hardened with a chemical coating and then used to facilitate bonding with specific
matrix. Collaboration The most important of the strengths are the properties of fiber. The function of the matrix is to
support the fibers and to the aircraft Is to provide strength on the outside, regardless of function being equal in many
situations. The purpose of material suppliers is to set up a system standard properties. [65] Carbon annotates water using a
We found that the DC potential scattering between the carbon fiber and the opposite electrodes, the carbon fiber is
uniformly deposited on the surface. Due to the negative charge, the carbon positive carbon fiber electrode moving towards,
which is nitric acid. The fiber is placed on the surface during treatment. Dispersion of pineapples in hydroxyl contributes
to net negative charge. In the first group of experiments, 5 Epoxy samples with mole% catalyst (for details) were used in
the test area. See) their weights were immersed in 3 G EG solvents and measured at different time points. EG evaporates to
prevent, close the container when placed at high temperature. Figure 1c at 180 C in EG, the average weight of the epoxy
samples as a function of the soaking time (normalized by the initial weight of the epoxy).
Environmental Applications
[27] Because MWCNTs are chemically reactive the interaction between annotates is significantly enhanced and the The
Production of Active MWCNTs are made of interconnected and perforated polymer composites. Improved chemical
properties, especially bonding as mentioned in heat treatment MWCNT / PP compound Is believed to be growing.
Therefore, heat treatment MWCNT / PP compounds exhibit good scattering and unique chemical behavior in dynamic
oscillating flow. strength. interface contact. [61] Open porosity and density were measured by the Archimedes method.
The morphology was observed with a scanning electron microscope (SEM, S4700; Hitachi, Japan). Laser flash mode (LFA
427, NETZSCH and Germany) using X-ray diffraction Cu Kα (λ = 1.54) radiation combination (XRD, max-2400; Tokyo,
Japan) Used to measure heat dissipation () and heat capacity (Cp). Thermal conductivity () is calculated by the following
equation: = Cpρ, which is the density of the sample. High Resistor meter (4339B, Agilent, USA) conducted to measure
direct current electrical resistance. [13] After the CFs were oxidized by the plasma mechanism and reduced by LiAlH4
treatment, changes in their surface organ contents were made by XPS. Figure 2 Provides wide-scan XPS spectra of
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 97
original, oxidized and reduced CFs. Composition and contents of CF surfaces Table I Listed. On the surface of oxidized
CF, the concentration of oxygen is significantly higher compared to untreated CF at the same time. The concentration of
carbon decreases significantly as shown in Figure 2 and Table I. The results show an increase in the O: C ratio from 0.118
to 0.251. [41] Micro structural imaging of 4D printed models using the Scanco μCT35 scanner (Skanko Medical,
Switzerland). X-ray voltage and current were set to 70 kV and 57 A, respectively. Scanning resolution is approximately
18.5 m / pixel. To reduce micro-CD imaging time, the length of the printed specimens was reduced to approximately 15
mm, and the length of the post-curve specimens was reduced to approximately 18 mm to observe failure. Changed the
brightness and contrast of 2D images obtained using CT vox software. 3D model reconstruction and cross-section using
CT vox software. [43] First, six different dyes were selected to test the absorption performance of PPY, PPY-CS, PPY-LS
and PPY-CS-LS, namely ethylene blue (MB), malachite green (MG), amaranth (AM) and acid. Orange. . 10 (AO10),
Congo red (CR), and acid blue74 (AB74). Shows positive charge in MB and MG solutions containing casein dyes; CR,
AM, AO10 and AB74 have negative charges in solution containing ionic dyes. Show. For volume studies, 60 mg L-1 was
added to 25 ml (MB, MG, CR, AM, AO10Or AB74) dye solution. Mg power sample (PPY, PPY-CS, PPY-LS or PPY-CS-
LS). ) After reaching equilibrium, the absorption-solution was passed through a filter and the equilibrium concentration of
the dye was analyzed. Different carry 50 UV-visible spectrophotometer. Then, absorption kinetics, isothermal and thermal
kinetics, according to the absorption efficiency and properties. [60] Determination of enzyme activity: Chromospheres
from AAPF-NA measure Absorption at 405 nm using SC function and initial ratios HTS7000 plus Obtained by measuring
the increase by monitoring the release of b-nitro aniline in polymeric films. Bio Assay Reader. Blue was used as the
substrate for and was initially measured At 610 nm using a UV-2401PC spectrophotometer. Measured. Rates are derived
from Scientific Instruments, Columbia, MD). A common for evaluation, SC or compost containing films immersed in a
100-mm solution of phosphate buffer (50 mm, pH 7.0). [14] The epoxy resin used in this study Compound EPO 1441-30
Resin, an acid. Penicillin is an anhydride curing agent and a 100: 70: 1 amine accelerator. In terms of weight. All of these
elements are shell Issued by Chemical Corporation. The texts used in Article 1K are high-strength carbon fibers supplied
by China's carbon factory. Thermal Conductivity
[35] Unless the simulation results are specified, two-level simulations were made in this study. First At this point, only the
localization of the DBD is allowed to receive the distribution of RA, DDS and SA. Prior to diffusion simulation, the RA
and DDS molecules were in the adhesive phase (24144 nm) and the SA molecules in the size layer (024 nm, fiber). Near
the surface) were only.. Alternative amount of epoxide 80%Cross-linking reactions are allowed until reached. [39] the first
phase, only DPD localization was allowed to receive Distribution of RA, DDS and SA. Prior to diffusion simulation, the
RA and DDS molecules were adhesive Phase (24-144 nm) and SA molecules were in the size layer (0-24 nm, fiber). Were
only near the surface. In the second stage, the distribution is the same Cross-linking reactions were activated with
improvement over time. Alternative amount of peroxide 80% Cross-linking reactions are allowed until reached. [5]
Recently, The suspension of GO sheets and BN platelets was treated with water heat to form RGO / BN hybrid followed
by air. Drying. 44 wt% high RGO / BN load.0 11.01 W m-12000 Epoxy and through-plane thermal conductivity K-1. Of
anisotropic hole structures Graphene (GNPs) currently work with high quality modifying BN platelets to further improve
thermal conductivity Are selected. First, vertically aligned RGO / GNP hybrid are formed by combining the water
suspension of GO. GNP with water heat. then air-drying. [52] We have demonstrated that the spatial distribution and
orientation of grapheme, which acts magnetically on the polymer, is geometrically controllable. The Matrix makes it easy
and efficient to design and develop graphene-based active compounds. Possible high-scaling path. The design possibilities
offered by grapheme magnetic manipulation reflect the excellent flexibility in the design of virtual magnetic axes, which
are highly efficient. And allows to create complex shapes with minimal effort. [7] For each type of structure mentioned
earlier, there are different ways to change the morphology of the resulting microstructure. Chemical composition,
solidification Simple binary conversion to different configuration types can be achieved from the rate or processing
method phase diagram. In general, with solid warning reactions Areas around unchanged points, such as associated
eutectic or pericardial points, act as morphological indicators. Various microstructures. [2] Diagram can achieve different
configuration types. Generally, eutectic or pericardial Areas around unchanged points associated with solid warning
reactions, such as dots, act as morphological indicators for various microstructures.
Conclusion
Analysis of the results given, when the concentration of the hardener is equal to or less than a stoichiometric, glass in nano
composite This allows us to conclude that the increase in conversion temperature goes faster than the initial resin.
However, at higher hardening, nano composite The glass change temperature appears to be lower than the glass change
temperature in the initial setting. Based on the analysis of literature data and given dependencies it can be concluded that
the epoxy compounds with CNDs lead to an increase in the magnitude of the change when not sufficiently curable (lack of
sufficiently high temperature and hardening). Chemical cross-linking to develop the most conventional network and thus
glass-changing temperature development. When complete change is achieved, the. Carbon nano tubes water using In a DC
capacity annotate scattering between carbon fiber and opposite electrodes From that we found that the carbon fiber was
uniformly deposited on the surface. Carbon annotates, due to negative charge The positive carbon fiber moves towards the
electrode, which is deposited on the fiber surface during nitric acid treatment, the negative charge of the carboxylic acid
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 98
groups introduced into the annotates 7, 8 and absorption. . Hydroxyl anions can contribute to net negative charge from
scattering.1 To analyze the influence of CNT on neighboring epoxy, the MD sample was separated using concentrated
cylinders centered on the CNT axis. The mass density of each cylindrical shell area Determined. For each sample, 250
instantaneous 100 PS NPT simulations were considered. Density profiles of 250 snapshots Density for each of the three
rated epoxy systems Is the average for obtaining a profile. Figure 3 (a) and (b) show the densities of the equilibrium anchor
attached models and the cross-linked models, respectively. Showing profiles. Spike density at about 4 Similar to the
carbon atoms in CNT. The CNT atoms uniformly exert the forces of Van Mann Walls on the epoxy, the part extracted
from it forming a distinct gap between the CNT and the epoxy. Morphology Al2O3 @ HGO hybrid, shown in Figure 2a-d,
provides some visual evidence for the HGO coating. In Figure 2a, the primitive Al2O3 particles reveal A typical spherical
shape with an approximate area and average size of 5 mm. Because the HGO coating transitions from a rough state to a
smooth surface is high There are some links between adjacent Al2O3 particles with a number of HGO coating layers
(Figure 2b). High magnification SEM (Figure 2c) and TEM images (Figure 2d) reveal that the surface of the Al2O3
particles is covered with a small HGO coating layer. Polymer Inkjet Printing and Direct- Writing output based technology-
4 is a powerful alternative to the conventional techniques mentioned above. Other inkjet printing techniques in 6Unlike,
low-viscosity solutions or polymer suspensions are used as 7 prints. Material. In Figure 2a, the primitive Al2O3 particles
reveal A typical spherical shape with an approximate area and average size of 5 mm. HGO coating in a rough condition
Smooth from, because of the high number of HGO coating layers changes on the surface There are some links between
Al2O3 particles (Figure 2b). High magnification SEM (Figure 2c) and TEM images (Figure 2d) reveal that the The surface
of the Al2O3 particles is covered with a small HGO coating layer. Polymer Inkjet Printing and Direct- Writing output
based technology-4 is an alternative to the usual techniques mentioned above. Unlike other inkjet printing techniques in 6,
low-viscosity solutions or polymer suspensions are used for 7 printing. Material.
Reference
1. Valero-Romero, M. J., S. Sartipi, X. Sun, J. Rodríguez-Mirasol, T. Cordero, F. Kapteijn, and Jorge Gascon.
"Carbon/H-ZSM-5 composites as supports for bi-functional FischerTropsch synthesis catalysts." Catalysis
Science & Technology 6, no. 8 (2016): 2633-2646.
2. Kablov, E. N., S. V. Kondrashov, and G. Yu Yurkov. "Prospects of using carbonaceous nanoparticles in binders
for polymer composites." Nanotechnologies in Russia 8, no. 3 (2013): 163-185.
3. Sharma, Mohit, Shanglin Gao, Edith Mäder, Himani Sharma, Leong Yew Wei, and Jayashree Bijwe. "Carbon
fiber surfaces and composite interphases." Composites Science and Technology 102 (2014): 35-50.
4. Suzuki, Motoyuki. "Activated carbon fiber: fundamentals and applications." Carbon 32, no. 4 (1994): 577-586.
5. Soutis, Costas. "Carbon fiber reinforced plastics in aircraft construction." Materials Science and Engineering:
A 412, no. 1-2 (2005): 171-176.
6. Mei, Lei, Yibin Li, Rongguo Wang, Chao Wang, Qingyu Peng, and Xiaodong He. "Multiscale carbon nanotube-
carbon fiber reinforcement for advanced epoxy composites with high interfacial strength." Polymers and Polymer
Composites 19, no. 2-3 (2011): 107-112.
7. Yu, Kai, Qian Shi, Martin L. Dunn, Tiejun Wang, and H. Jerry Qi. "Carbon fiber reinforced thermoset composite
with near 100% recyclability." Advanced functional materials 26, no. 33 (2016): 6098-6106.
8. Liu, Shaoxiong, Lingxia Zheng, Pingping Yu, Sancan Han, and Xiaosheng Fang. "Novel composites of α‐Fe2O3
tetrakaidecahedron and graphene oxide as an effective photoelectrode with enhanced photocurrent
performances." Advanced Functional Materials 26, no. 19 (2016): 3331-3339.
9. Baeza, Francisco Javier, Oscar Galao, Emilio Zornoza, and Pedro Garcés. "Multifunctional cement composites
strain and damage sensors applied on reinforced concrete (RC) structural elements." Materials 6, no. 3 (2013):
841-855.
10. Gao, Xuran, Bingbing Wang, Kuikui Wang, Shuang Xu, Sipeng Liu, Xuehua Liu, Zirui Jia, and Guanglei Wu.
"Design of Ti3C2Tx/TiO2/PANI multi-layer composites for excellent electromagnetic wave absorption
performance." Journal of Colloid and Interface Science 583 (2021): 510-521.
11. Berthet, M-A., H. Angellier-Coussy, Vorleak Chea, Valérie Guillard, Emmanuelle Gastaldi, and Nathalie
Gontard. "Sustainable food packaging: Valorising wheat straw fibres for tuning PHBV-based composites
properties." Composites Part A: Applied Science and Manufacturing 72 (2015): 139-147.
12. Karami, Pooria, Samaneh Salkhi Khasraghi, Mohammadjafar Hashemi, Sima Rabiei, and Akbar Shojaei.
"Polymer/nanodiamond composites-a comprehensive review from synthesis and fabrication to properties and
applications." Advances in colloid and interface science 269 (2019): 122-151.
13. Radue, M. S., and Gregory M. Odegard. "Multiscale modeling of carbon fiber/carbon nanotube/epoxy hybrid
composites: Comparison of epoxy matrices." Composites Science and Technology 166 (2018): 20-26.
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 99
14. Kempahanumakkagari, Sureshkumar, Kowsalya Vellingiri, Akash Deep, Eilhann E. Kwon, Nanthi Bolan, and Ki-
Hyun Kim. "Metalorganic framework composites as electrocatalysts for electrochemical sensing
applications." Coordination Chemistry Reviews 357 (2018): 105-129.
15. Lee, Seung Hwan, EunNaRi Cho, So Hee Jeon, and Jae Ryoun Youn. "Rheological and electrical properties of
polypropylene composites containing functionalized multi-walled carbon nanotubes and
compatibilizers." Carbon 45, no. 14 (2007): 2810-2822.
16. Song, Chaokun, Yongsheng Liu, Fang Ye, Laifei Cheng, Pengfei Zhang, and Nan Chai. "Enhanced mechanical
property and tunable dielectric property of SiCf/SiC-SiBCN composites by CVI combined with PIP." Journal of
Advanced Ceramics 10, no. 4 (2021): 758-767.
17. He, J. M., and Y. D. Huang. "Effect of silane‐coupling agents on interfacial properties of CF/PI
composites." Journal of applied polymer science 106, no. 4 (2007): 2231-2237.
18. Liu, Yang, Wei Zhang, Fenghua Zhang, Jinsong Leng, Shaopeng Pei, Liyun Wang, Xinqiao Jia, Chase Cotton,
Baozhong Sun, and Tsu-Wei Chou. "Microstructural design for enhanced shape memory behavior of 4D printed
composites based on carbon nanotube/polylactic acid filament." Composites Science and Technology 181 (2019):
107692.
19. Zhou, Jing, Qiu-Feng Lü, and Jia-Jia Luo. "Efficient removal of organic dyes from aqueous solution by rapid
adsorption onto polypyrrolebased composites." Journal of cleaner production 167 (2017): 739-748.
20. Asuri, Prashanth, Sandeep S. Karajanagi, Ravi S. Kane, and Jonathan S. Dordick. "Polymernanotubeenzyme
composites as active antifouling films." Small 3, no. 1 (2007): 50-53.
21. He, Jinmei, Yudong Huang, Linghui Meng, Hailin Cao, and Hongbo Gu. "Effects of chain lengths, molecular
orientation, and functional groups of thiols adsorbed onto CF surface on interfacial properties of CF/epoxy
composites." Journal of applied polymer science 112, no. 6 (2009): 3380-3387.
22. Warshawsky, A., D. A. Upson, W. T. Ferrar, and J. R. Monnier. "Zerovalent metal polymer composites. III.
Metallization of metal oxide surfaces with the aid of metallized functional polymer microdispersions." Journal of
Polymer Science Part A: Polymer Chemistry 27, no. 9 (1989): 3015-3041.
23. Karami, Pooria, Samaneh Salkhi Khasraghi, Mohammadjafar Hashemi, Sima Rabiei, and Akbar Shojaei.
"Polymer/nanodiamond composites-a comprehensive review from synthesis and fabrication to properties and
applications." Advances in colloid and interface science 269 (2019): 122-151.
24. Dermanaki Farahani, Rouhollah, and Martine Dubé. "Printing polymer nanocomposites and composites in three
dimensions." Advanced Engineering Materials 20, no. 2 (2018): 1700539.
25. Leng, Jinsong, Xin Lan, Yanju Liu, and Shanyi Du. "Shape-memory polymers and their composites: stimulus
methods and applications." Progress in Materials Science 56, no. 7 (2011): 1077-1135.
26. Ma, Jun, Qingshi Meng, Andrew Michelmore, Nobuyuki Kawashima, Zaman Izzuddin, Carl Bengtsson, and Hsu-
Chiang Kuan. "Covalently bonded interfaces for polymer/graphene composites." Journal of Materials Chemistry
A 1, no. 13 (2013): 4255-4264.
27. Ma, Chao, and Hongbo Gu. "Low Loading of Grafted Thermoplastic Polystyrene Strengthened and Toughened
Transparent Epoxy Composites." In 2017 AIChE Annual Meeting. AIChE, 2017.
28. Jeon, Seong Ho, Heon Mo Kim, Tae-Hong Park, Byoung-Ho Chi, and Woo Chun Choi. "Development of
polycarbonate/acrylonitrilebutadienestyrene copolymer based composites with functional fillers for car audio
chassis." Materials & Design 32, no. 3 (2011): 1306-1314.
29. Li, Min, Yi-Zhuo Gu, Hong Liu, Yan-Xia Li, Shao-Kai Wang, Qing Wu, and Zuo-Guang Zhang. "Investigation
the interphase formation process of carbon fiber/epoxy composites using a multiscale simulation
method." Composites science and technology 86 (2013): 117-121.
30. Feng, Yuezhan, Chengen He, Yingfeng Wen, Xingping Zhou, Xiaolin Xie, Yunsheng Ye, and Yiu-Wing Mai.
"Multi-functional interface tailoring for enhancing thermal conductivity, flame retardancy and dynamic
mechanical property of epoxy/Al2O3 composites." Composites Science and Technology 160 (2018): 42-49.
31. Feng, Yuezhan, Chengen He, Yingfeng Wen, Xingping Zhou, Xiaolin Xie, Yunsheng Ye, and Yiu-Wing Mai.
"Multi-functional interface tailoring for enhancing thermal conductivity, flame retardancy and dynamic
mechanical property of epoxy/Al2O3 composites." Composites Science and Technology 160 (2018): 42-49.
32. An, Fei, Xiaofeng Li, Peng Min, Pengfei Liu, Zhi-Guo Jiang, and Zhong-Zhen Yu. "Vertically aligned high-
quality graphene foams for anisotropically conductive polymer composites with ultrahigh through-plane thermal
conductivities." ACS applied materials & interfaces 10, no. 20 (2018): 17383-17392.
33. Le Ferrand, Hortense, Sreenath Bolisetty, Ahmet F. Devisors, Rafael Libanori, André R. Studart, and Raffaele
Mezzenga. "Magnetic assembly of transparent and conducting graphene-based functional composites." Nature
communications 7, no. 1 (2016): 1-9.
P.K.Chidambaram.et.al / REST Journal on Emerging trends in Modelling and Manufacturing 7(3) 2021, 94-100
Copyright@REST Publisher 100
34. Heinz, Nicholas A., Teruyuki Ikeda, Yanzhong Pei, and G. Jeffrey Snyder. "Applying quantitative microstructure
control in advanced functional composites." Advanced Functional Materials 24, no. 15 (2014): 2135-2153.
35. Li, Qingxiu, and Laurent M. Matuana. "Effectiveness of maleated and acrylic acid-functionalized polyolefin
coupling agents for HDPE-wood-flour composites." Journal of Thermoplastic Composite Materials 16, no. 6
(2003): 551-564.
36. Dr. Amol Lokhande, Dr. C. Venkateswaran, Dr. M. Ramachandran, S. Chinnasami, T. Vennila, A Review on
Various Implications on Re engineering in Manufacturing, REST Journal on Emerging trends in Modelling and
Manufacturing Vol: 7(3), 2021,70-75.
37. Dr. Amol Lokhande, Dr. C. Venkateswaran, Dr. M. Ramachandran, C. Vidhya, R. Kurinjimalar, A Study on
Various Implications on Reusing in Manufacturing, REST Journal on Emerging trends in Modelling and
Manufacturing 7(2) 2021, 63-69
38. Gadde Mehar Chaitanya, M.P.Jenarthanan, C. Sathiyaraj, A Review on Glass fibre Reinforced Composites with
Different Matrix, REST Journal on Emerging trends in Modelling and Manufacturing 7(1) 2021, 18-24.
39. Allahkarami, Zeynab, Ahmad Reza Sayadi, and Amol Lanke. "Reliability analysis of motor system of dump truck
for maintenance management." In Current trends in reliability, availability, maintainability and safety, pp. 681-
688. Springer, Cham, 2016.
40. Lanke, Amol Arun, Seyed Hadi Hoseinie, and Behzad Ghodrati. "Mine production index (MPI)-extension of OEE
for bottleneck detection in mining." International Journal of Mining Science and Technology 26, no. 5 (2016):
753-760.
41. Lanke, Amol, Hadi Hoseinie, and Behzad Ghodrati. "Mine production index (MPI): new method to evaluate
effectiveness of mining machinery." Int. J. Environ. Chem. Ecol. Geol. Geophys. Eng 8 (2014): 714-718.
42. Ramachandran, M., Sahas Bansal, and Pramod Raichurkar. "Experimental study of bamboo using banana and
linen fibre reinforced polymeric composites." Perspectives in Science 8 (2016): 313-316.
43. Raichurkar, Pramod, and M. Ramachandran. "Recent trends and developments in textile industry in India."
International Journal on Textile Engineering & Processes 1, no. 4 (2015): 47-50.
44. Chidambaram, P. K., and R. Ramakrishanan. "Manufacturing, testing of polymer nanocomposite and analysis of
tennis racket frame." International Journal of Engineering and Technology Innovation 4, no. 1 (2014): 59.
45. Chidambaram, P. K., and R. Ramakrishanan Impact. "String Tension and Vibration Analysis of Nancomposite
Based Tennis Racket Frame." Scholars Journal of Engineering and Technology (2014): 206-211.
46. Chidambaram, P. K., K. Thamilarasan, J. Barath Kumar, and L. Auxcilia Mary. "A review on turbines in power
production using wind and hydro energy." Materials Today: Proceedings (2021).
47. Jayapriya, J., D. Muruganandam, M. Shantharaj, S. Thayumanavan, S. Suraj, and P. K. Chidabaram. "Design and
analysis of glass fiber reinforced composites." Materials Today: Proceedings 26 (2020): 2491-2494.
48. Chidambaram, P. K. "Synthesis, Testing of Polymer Carbon Nanocomposite and Structural Analysis of Tennis
Racket Frame." International Journal of Engineering Sciences & Research Technology 2, no. 10 (2013).
49. Chidambaram, P. K., and R. Ramakrishnan. "Mechanical properties and Morphological analysis of nylon6,
6/cloisite@ 20A Nanocomposite." National Journal on Advances in Building Sciences and Mechanics 3 (2012): 8-
13.
50. Rajaperumal, C. Vengatesha, P. K. Chidambaram, M. Arputha Bibiana, and G. Arun. "Development of Dual
purpose manual weeder." Materials Today: Proceedings (2021).
51. Thamilarasan, K., P. K. Chidambaram, A. Ponshanmugakumar, and V. Bharani. "Design and Automation of
degreasing of oil from strained materials." Materials Today: Proceedings (2021).
52. Srividhya, K., P. K. Chidambaram, A. Sivasakthi, and P. Dharanidharan. "Pre concentration and analysis of trace
quantities of heavy metals using coirpith." Materials Today: Proceedings (2021).
53. Chidambaram, P. K., S. JohnDaniel, and M. Ganesh Kumar. "Morphological Analysis of the Nylon6, 6 Matrix
based Clay and Carbon Nano composites." Materials Today: Proceedings 16 (2019): 1344-1349.
... Most products are Thermal conductivity Thermal Used in sinks low value Materials as heat conductors are used. [38]Fortier's heat conductivity law (also known as thermal conductivity law) ratio heat transfer. Replaced by an object. ...
Article
Full-text available
Graphene, an atomic thin two-dimensional carbonaceous nanomaterial, has exceptional electrical, mechanical and chemical properties. There is also great research interest in the development of two technologies. Since the discovery of graphene, this reliable Wide range of material applications Integrated,and many attempts have been made To modify the structure of graphene. Particular attention is paid. Graphene Derivatives Graphene Oxide Hole Graphene / Graphene oxide, recent Developments development of reduced Graphene oxide and graphene quantum points. In this chapter, the inherent properties of the definition and the different approaches to top-down and basically graphene derivatives are discussed below. This includes the formation of derivatives of graphene by chemical oxidation. In addition, the bit and peel-out mechanism for creating graphene derivatives, which leads For a better understanding of Physics of graphene derivatives And chemical properties.
Article
The purpose of this thesis is to develop a MCDM system based on a deletion and selective translation reality (ELECTRE) Assessment information is expressed and manipulated by the Tempster-Schaefer Theory (DST). DST is the primary means for uncertainty modeling. In this paper, the weight of the criteria and the effectiveness of each alternative are expressed in terms of linguistic terms and belief levels, which are then converted into basic probability assignment (BPA) representations. In order to integrate the evaluations of different experts in the most rational and efficient manner, a discount system in DST is provided Based on the proposed concept of source reliability. In addition, as a family of MCDM models, the ELECTRE system is known for its superior relationships in ordering a set of alternatives. As an extension, artificial weight, including subjective and objective weights, is used to determine concepts of synchronization and variance. The proposed DS-ELECTRE approach directly reflects the advantage of DST and deals with uncertainty, but the ELECTRE method can also play a role in analyzing the relationships between alternatives. An illustrative number example is conducted to demonstrate the effectiveness of the DS-ELECTRE method. The final result matrix can be obtained based on the fusion results, which will then be used in ELECTRE mode. At this point, the transcendental relationships between all pair alternatives are structured in ELECTRE mode using concepts of synchronization and contrast, which are Represented by some corresponding matrix. A result chart will be drawn based on the resulting global matrix, and the ranking results will be analyzed to determine the appropriate provider. In short, a new ELECTRE-based system has been developed to address MCDM issues in DST contexts, which can be considered by decision makers. non-formal evaluation and apply incomplete or insufficient knowledge of data. Therefore, in this study, a comprehensive Weight including subjective weight and objective weight is defined in the process of ELECTRE method to make the synchronization and contrast metrics more reasonable. Subjective weight is obtained only on the basis of decision makers ’preferences or judgments, and objective weight is determined using the entropy weight method.
Article
Hazard Identification and Risk Assessment (HIRA) is a protection device utilized in maximum vehicle Components manufacturing industries to pick out the risks and assess the risks in the plant. The evaluation of the dangers in the place of work is a vital mission to evaluate the reasons of the injuries. This will locate the answer for the hazards and to create a secure running region for the employees. It isn't feasible to do away with all risks, so the intention is to put off and / or manage all the viable hazards with crucial and excessive ability and to lessen the rest of the feasible dangers to the minimum affordable danger degree in order to protect employees from damage. The hazard score became relying upon the multiplication of severity and possibility. The risk stage has been divided in 4 classes low, medium, excessive and medium. The existing control measures and additional control measures had been recognized and ensure secure team of workers inside the Auto Components manufacturing industry.
Book
Full-text available
Drilling is the process of cutting holes in a solid object using a rotating cutting tool. Indentation is the starting point for drilling the hole. Drilling is a cutting process in which a drill is used to cut or enlarge a hole in a solid object. Drillman Member drilling team that operates a drilling rig; He is responsible for drilling operations and oversees the drilling team. A drill is a man who works on drill land controls. Training, training and rehearsal of recommended movements to prepare soldiers for the fulfillment of their duties in peace and war. In a practical sense, the coach integrates players into combat systems and introduces them to their weapons. Drilling is a term used for the mechanical sowing of an agricultural crop. Traditionally, a seed drill mounted on a series of tubes with a cap filled with seeds is another way of describing a rodman-like gang to allow optimal growth of the resulting plant. Member on a training basis. You are usually at the forefront of the conflict, but unlike Rodman, you can do so to fund their side buzz as a drill rapper instead of using Ps. Exercises Team members in seawater or gas hoops. They Installation, operation and maintenance of well drilling equipment in search of oil and gas. They oversee the other members of the drilling team: Rostabuts, Ruffnex and Derrick Guy. The training is simple and straightforward. In ancient times, the most powerful, efficient and developed empires created ways to move troops from one place to another without mixing with other troops. So they marched from one place to another, also known as the drill. Drill Team promotes Air Force service and shows training programs for the recruitment, retention and promotion of Air Force personnel in public and military locations. They support the Air Force Recruitment Service as an officer Angels in blue. Chicago's drill music superstar, Chief Billboard hit the top 20 hits of 2012 in the R&B / Hip-Hop Songs Series are "I Don't Like". Unhurried, frequently advertised delivery and Bittersweet lyrics constantly set the tone for music practice. With a small seedling or small seedling, carefully pick up some seedlings without injuring the roots. Divide these seedlings and place them in the holes in the field, pressing the soil near the roots with your fingers to make sure the soil is firm.
Chapter
Full-text available
The density of an object varies with temperature and pressure. This variation is generally smaller for solids and liquids, bu t too much for gases. As the pressure on an object increases The volume of the material decreases and its density increases. Increasing the temperature of an object (with some exceptions) decreases its density by increasing its volume. In most materials, as the base of the liquid heats up, the density o f the heated liquid decreases, causing heat to condense from the bottom up, it will rise compared to dense unheated materials. The interaction of the density of an object is sometimes called its specific volume, which is sometimes used in thermodynamics. Density is an increase in the size of an object that does not increase its density. Rather it increases its mass. Water density also depends on the purity of water. Pure water is less den se as compared to the saline water. The decrease in the purity of water increases the density of water. The seawater is denser than pure water. In the deep oceans, the density of water increases in depths. This change or fluctuation in the density in oceans , produce the currents in the oceans. These currents circulate around the world. When the temperature rises in summers, the seawater becomes less dense. On the rise of temperature, water gets warmer and molecules spread out. When the temperature goes down in winters, the seawater becomes denser as most of the chemicals pres ent in the seawater become denser.
Chapter
Full-text available
Weight Process Method (WPM) is a popular number Criterion Results Analysis (MCDA) / Multiple Criteria Decision Making (MCDM) method. This is the sum of the weights Similar to the model (WSM). The main difference is, In the main mathematical function there is now multiplication instead of addition. MCDM is multifaceted, inconsistent, standard and / or quantitative Consensus on integrating alternative performance into criteria Is a technique for creating a solution that requires feedback. To calculate the weighted product, we will multiply the value of each attribute in every column row-wise. The value with the highest weighted product is given the higher rank. Like all MCDA / MCDM methods, many Described in terms of decision-making criteria The result is a finite set of alternatives. For each end The substitute is also multiplied by several ratios and compared with the others, One for each end criterion. Weighted shading mode () like density mode Colors that represent density in each pixel Draw markers using, but optional With weighting integration. To provide the final weighing result How the coordinates weigh in each pixel You can configure which are connected. Multiple criteria for decision making (MCDM) size and Complex decision making (DM) involving quality factors Is considered a tool. In recent years, many MCDM Techniques and approaches optimal feasibility Recommended to select options. In statistics, a weighted median of a sample is the 50% weighted percentile. Like the median, it is useful as an estimator of central tendency, robust against outliers
Article
Full-text available
In most developing countries riveting, offset forging and punching operations are done using manual hammer technique; the purpose of this study is therefore to produce AHM at affordable prices using material selection methods useful in design and fabrication processes. In this study, a vague multipurpose optimization model based on ratio analysis (ambiguous MOORA) is used to evaluate the supplier's overall performance. In fact, suppliers face risks such as natural disasters or political change. Therefore, Failure Method and Impact Analysis (FMEA) is implemented to assess a supplier's risks. Furthermore, a novel multi-objective mathematical model was developed to simultaneously consider the stability and order of the supplier. Therefore, in order to survive in a global competitive environment, it is imperative to implement the appropriate ERP system. However, choosing the wrong ERP system can affect the overall performance of the manufacturing company. Due to the limitations in the available resources, the complexity of the ERP systems and the diversity of alternatives, it is often difficult to choose. And install the most suitable ERP system for a manufacturing company.
Chapter
Full-text available
Demodel Causation between the components of a system and the result is a type Useful for analysis Structural model approach relationships. Vague dematal, Green supply chain management Testing and evaluation of results, critical success factors, analytics network process dematal are one of the components Can be used to Ensure relationship / interdependence or Comparison of relationships in the decision-making test between them Reflect the size. And Appraisal Laboratory (Dimadel) of a complex system Cause-effect chain element considered a better method to identify. It is the evaluation and visual structure of the interrelated relationships between factors Deals with identifying important ones by Sample. Over the past decade, the use of dimethoate numerous studies have been conducted on. Various variations have also been proposed in the literature. The purpose of this study is démodé Methods and applications of the technique Is to systematically review. Used According to the approaches publications five categories: Compiled Classical Dimetal Fuzzy Blur, Gray Blur, Analysis Network Process-(anp-) blur and other blur. All documents are summarized and analyzed for each category. Point out their implementation practices, actual applications and important innovations. This systematic and comprehensive review of current research trends and Contains Researchers on the use of tomato and Valuable insights for coaches and more Indicate possible directions for research.
Article
Full-text available
Material recycling is the sustainable use of a substance, sustainable production, additive production, powder reuse, knowledge management, reuse of water, etc. Is the process of picking up old items and finding new ones? ... Sometimes items can be reused by others. Clothes can be donated frequently and given a second life. Recycling is better than recycling because it saves energy coming from disposing and recycling materials.This significantly reduces waste and pollution because it reduces the need for raw materials and saves both forest and water supply. When we do not recycle, reuse and reduce, we are destroying natural habitats. As it is, our planet cannot cope with the current rate of destruction. If we fail to reuse what we already have, we end up in a sticky situation of running out of resources. By reducing our waste, we are conserving our resources. Resources such as aluminum, petroleum and wood are all used to make new products such as cans, plastic bags and paper packaging. Less energy is used to recycle materials as opposed to creating new ones.
Article
Full-text available
Material recycling is the sustainable use of a substance, sustainable production, additive production, powder reuse, knowledge management, reuse of water, etc. Is the process of picking up old items and finding new ones? ... Sometimes items can be reused by others. Clothes can be donated frequently and given a second life. Recycling is better than recycling because it saves energy coming from disposing and recycling materials.This significantly reduces waste and pollution because it reduces the need for raw materials and saves both forest and water supply. When we do not recycle, reuse and reduce, we are destroying natural habitats. As it is, our planet cannot cope with the current rate of destruction. If we fail to reuse what we already have, we end up in a sticky situation of running out of resources. By reducing our waste, we are conserving our resources. Resources such as aluminum, petroleum and wood are all used to make new products such as cans, plastic bags and paper packaging. Less energy is used to recycle materials as opposed to creating new ones.
Article
Full-text available
The SiBCN matrix via chemical vapor infiltration (CVI) or/and polymer infiltration pyrolysis (PIP) technologies was orderly introduced to SiC f /SiC composites to optimize the mechanical property and electromagnetic (EM) shielding effectiveness simultaneously. The BN interface with the thickness of 350 nm was designed to obtain a little stronger interface bonding. The flexural strength of SiC f /SiC-SiBCN composites reached 545.45±29.59 MPa thanks to the crack deflection between the CVI SiC and CVI SiBCN, as well as CVI SiBCN and PIP SiBCN matrix because of the modulus difference between them. The fracture toughness ( K IC ) with the value of 16.02±0.94 MPa·m 1/2 was obtained owing to the extension of crack propagation path. The adverse effect of stronger interface bonding was eliminated by the design of matrix microstructure for SiC f /SiC-SiBCN composites. The thermal conductivity in the thickness direction was 7.64 W·(m·K) ⁻¹ at 1200 °C and the electric resistivity decreased to 1.53×10 ³ Ω·m. The tunable dielectric property was obtained with the coordination of wave-absorption CVI SiBCN matrix and impedance matching PIP SiBCN matrix, and the total shielding effectiveness ( SE T ) attained 30.01 dB. It indicates that the SiC f /SiC-SiBCN composites have great potential to be applied as structural and functional materials.
Article
Full-text available
The glass fibers compared to the natural fibers of production has less environmental impacts severe. Natural fiber mainly for cultivation solar power Depends Also small use in fiber production and extraction amounts Fossil Fuel energy. In this paper study by the effect of drilling, Mechanical parts and component assembly in structures is Often in the industry Is the machining process is practice hemp-filled B.P. of Mechanical properties and compositions with glass fibers with properties Is replaced by a portion of the hemp fibers. The approximately mixed short fibers the glass fiber repaper of Mechanical properties of fiberglass Study by copying compounds. Are made and optimized Fiber length and wt% Are estimated. Hybrid fiberglass and between the adhesive of the thermal expansion coefficient of the thermal pressure generated by the difference Causing is imaginary temperature resin may case dependencies of the apparent shear strength. Glass fibers on tooth brushing sites by merging the PMMA strength of the teeth can increase that is what this study suggests.
Article
Degreasing of oil is essential for the materials in production process particularly in industries before polishing or paining metal parts. In manual removing oil from the work pieces by the mechanical separator using saw dust delays the production time. For polishing there should be no oil strains on work piece. Automation is done in this process for removing the oil strained from the work pieces. This process reduces the time taken and also the labour stress. It is easy to control. Degreasing oil mainly used for industrial purposes, any oil strains on work piece can cause less adhesive for painting or polishing.
Article
Grass and weeds are common difficulites faced by farmers which affect nutrition and growth rate of plants. The purpose of this project is to develop manual weed removing machine (weeder). The Development of Dual Purpose Manual weeder using chain and pedal mechanism is to remove weeds in the fields and lawn. Chain drive has been used for transmitting manual pedal power to cutter. The cutter is controlled by the connecting links which obeys non-Grashof’s law to ensure double rocker mechanism. Hoe and harrow are the two types of cutters used. Weeds are hectic problem for farmers in order to remove that they need some special tools and labour as well as certain amount of time wasted on this work. To address the above stated problem the machine has to be designed and fabricated.
Article
This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been withdrawn as part of the withdrawal of the Proceedings of the International Conference on Emerging Trends in Materials Science, Technology and Engineering (ICMSTE2K21). Subsequent to acceptance of these Proceedings papers by the responsible Guest Editors, Dr S. Sakthivel, Dr S. Karthikeyan and Dr I. A. Palani, several serious concerns arose regarding the integrity and veracity of the conference organisation and peer-review process. After a thorough investigation, the peer-review process was confirmed to fall beneath the high standards expected by Materials Today: Proceedings. The veracity of the conference also remains subject to serious doubt and therefore the entire Proceedings has been withdrawn in order to correct the scholarly record.
Article
This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been withdrawn as part of the withdrawal of the Proceedings of the International Conference on Emerging Trends in Materials Science, Technology and Engineering (ICMSTE2K21). Subsequent to acceptance of these Proceedings papers by the responsible Guest Editors, Dr S. Sakthivel, Dr S. Karthikeyan and Dr I. A. Palani, several serious concerns arose regarding the integrity and veracity of the conference organisation and peer-review process. After a thorough investigation, the peer-review process was confirmed to fall beneath the high standards expected by Materials Today: Proceedings. The veracity of the conference also remains subject to serious doubt and therefore the entire Proceedings has been withdrawn in order to correct the scholarly record.
Article
Ti3C2Tx MXene is an excellent electromagnetic wave (EMW) absorber with excellent electrical conductivity and abundant surface functional groups. In this research, Ti3C2Tx/TiO2/PANI multi-layer composites were successfully synthesized by HCl and LiF etching, one-step hydrothermal method and in-situ polymerization. Ti3C2Tx can provide more electron transfer paths due to its unique multilayer structure and high specific surface area. The growth of TiO2 particles on the surface of Ti3C2Tx through hydrothermal reaction enhances the interface polarization, and then polyaniline (PANI) is doped on the surface of Ti3C2Tx where TiO2 particles are grown by in-situ polymerization. Due to the excellent dielectric properties and synergistic effects of the material itself, Ti3C2Tx/TiO2/PANI composites have excellent EMW absorption property. In this study, the Ti3C2Tx/TiO2/PANI composites showed the strong reflection loss (RL) of at 13.92 GHz, which was −65.61 dB, and the thickness was only 2.18 mm. Moreover, the composites also exhibit a wide absorption band, with an effective absorption bandwidth (RL < -10 dB) of 5.92 GHz (11.84 GHz to 17.76 GHz) at 2.10 mm. The results show that the Ti3C2Tx/TiO2/PANI composites are expected to become EMW absorber with thin thickness and high absorption strength.
Article
The plane of the reinforcement during the impregnation is resin flow the used parameter increase the quality and to reduce the process time. In this work the two different orientations of 0° and 90°, the mechanical properties of these composites such as tensile and flexural are evaluated, thehorizontal direction zero degree fiber orientation having maximum tensile strength of 90 MPa, flexural strength of 164 MPa. The finite element methods (FEM) find out the resulting of mechanical properties by using ANSYS version 12.0. Finding experimental results, very close to the results with FEM model values. Based on the results hybrid composites are superior properties than for polymer composite materials.