Content uploaded by Shibu K. Mani
Author content
All content in this area was uploaded by Shibu K. Mani on Mar 15, 2022
Content may be subject to copyright.
38
Sustainable Irrigation through Application of Hydrogel: A Review
Surya Prakash1* • Sriram Vasudevan2 • Ankush Banerjee3 • Aditya C Joe4
• K.N. Geetha5 • Shibu K Mani6
1*Research Scholar, CHRIST (Deemed to be University), School of Engineering and Technology, Department of Civil Engineering,
Bengaluru, Karnataka, India. E-mail: boreddyspr1@gmail.com, ORCID: 0000-0001-9893-2153
2UG Scholar, CHRIST (Deemed to be University), School of Engineering and Technology, Department of Civil Engineering,
Bengaluru, Karnataka, India. ORCID: 0000-0002-4526-4611
3UG Scholar, CHRIST (Deemed to be University), School of Engineering and Technology, Department of Civil Engineering,
Bengaluru, Karnataka, India. ORCID: 0000-0002-7996-021X
4UG Scholar, CHRIST (Deemed to be University), School of Engineering and Technology, Department of Civil Engineering,
Bengaluru, Karnataka, India. ORCID: 0000-0002-6590-0902
5Department of Agronomy, University of Agricultural Sciences, GKVK, Bengaluru, Karnataka, India. ORCID: 0000-0003-1393-3638
6Associate Professor, CHRIST (Deemed to be University), School of Engineering and Technology, Department of Civil Engineering,
Bengaluru, Karnataka, India. ORCID: 0000-0001-6756-1206
A R T I C L E I N F O
Article History:
Received: 27.04.2021
Accepted: 05.06.2021
Available Online: 12.07.2021
Keywords:
Hydrogel
Irrigation
Sustainability
Agriculture
Superabsorbent Polymer
Biodegradability
Slow Release
Absorbency
Swelling
Degradation
A B S T R A C T
Agricultural sustainability is essential to enhance food and water security, particularly in the
context of climate change. In the recent past, applications of hydrogels in agriculture have
received substantial attention among researchers as well as among farmers. This review
elaborates on various aspects of hydrogels such as classifications, ideal properties for
agricultural application, and interaction mechanisms with soil and plants. The experimental
methods for determining hydrogel properties were given specific attention as properties such
as swelling, retention, slow release, and degradation are of vital importance to agricultural
sustainability. The studies conducted over the years on the effect of hydrogel application on
different crops are reviewed. Several hydrogel studies demonstrate significant improvement
in water consumption, water use efficiency, crop growth and yield parameters. The review
looks into hydrogel degradation mechanisms in soil and also the ‘test methods’ for assessment
of biodegradation. The gap areas in research on hydrogels and agricultural sustainability have
also been identified. The need for developing a framework for the evaluation of the suitability
of hydrogel for agricultural applications has been brought out. The review would encourage
further research on enhancing the ideal properties of hydrogel and synthesizing with natural
polymers. The use of hydrogel in agriculture for controlled nutrient release could be an
alternative to conventional release methods for fertilizers and pesticides, thereby reducing
the environmental footprint. The reduction in water footprint in major crops such as paddy
and wheat through hydrogel might establish a shift towards sustainable irrigation practices if
adopted on a large scale. Integrating innovative solutions with environmental-friendly
hydrogels in the coming decades will contribute to the pursuit of achieving sustainable
development goals.
Please cite this paper as follows:
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021). Sustainable Irrigation Through Application of
Hydrogel: A Review. Alinteri Journal of Agriculture Sciences, 36(2): 38-52. doi: 10.47059/alinteri/V36I2/AJAS21113
Introduction
Water is the most consumed resource on the planet.
Scarcity of water is a threat to most nations, and is currently
* Corresponding author: boreddyspr1@gmail.com
a pressing issue in most developing nations, owing to
climate change, and the increasing trend of temperature
anomalies (Allen et al. (2018)). Increase in human activities
such as agricultural production, and rapid domestication of
animals have had a profound impact on the resource balances
in the ecosystem of the planet leading to uncertainties in
Alinteri J. of Agr. Sci. (2021) 36(2): 38-52
e-ISSN: 2587-2249
info@alinteridergisi.com
http://dergipark.gov.tr/alinterizbd
http://www.alinteridergisi.com/
DOI:10.47059/alinteri/V36I2/AJAS21113
RESEARCH ARTI CLE
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
39
climate shifts (Smith & Zeder (2013)). These changes are
generally not expected to be distributed equally and will
much be dependent on regional climatic variations, resource
availability and adaptive capabilities. Moreover, those
nations not having participated in the accumulation of
greenhouse gases will experience the highest environmental
harm from climate change (Lelieveld et al. (2012)).
Extreme temperature events and drought frequency have
increased in the recent decades. Several studies have been
done with respect to the impact of climate change on
precipitation and irrigation. In India, it has been predicted
that an increase in irrigation storage is essential to keep the
agricultural production at level with the demand due to
decline in groundwater reserves in semi-arid regions and
shifts in surface water distribution across river-fed irrigation
plains (Devineni et al. (2013)). It is claimed that the number
of drought events over the past decade has worsened and the
pattern of monsoon rainfall contributing to 80 % of Nepal’s
precipitation has become more erratic since 2000 (Jha et al.
(2016)). Each year has been hotter than the previous year in
the African continent for the past 20 years. It is estimated that
by 2080, the average temperature across Africa would increase
by 4.5 °C with drastic changes in precipitation patterns
(Rosenstock et al. (2018)). In China, the predictions show that
there will be a temperature increase of at least 1.5 °C by the
year 2100, and the precipitation would be increasingly
unpredictable and more erratic with increased frequency of
droughts and floods in the coming years besides more
possibilities for heatwaves (Piao et al. (2010)). Depletion and
scarcity of water poses a major obstacle towards
development. Agricultural sector is the largest consumer of
water and would come to bear the greatest blow from water
scarcity issues (Roy et al. (2019)).
The “sustainable development goals” (SDGs), and
“climate-smart agriculture” (CSA) are guiding frameworks for
establishing sustainability in terms of food security, water
availability, and production and consumption (Rosenstock et
al. (2018), ECOSOC (2019)). It is reasonable to reduce
consumption while increasing crop production to overcome
the issues of excess consumption and reduced yield. Soil
moisture and soil nutrient content are major deciding factors
to ensure high yield of crops. Intermittent absence of water for
crops such as paddy can lead to heavy losses for the farmers as
well the society. Continuous supply of water under ordinary
conditions is a necessity for the cultivation of such crops. In
semi- arid regions, the crops such as paddy and wheat
cultivated are either rainfed or through canal irrigation
(Devineni et al. (2013)). The availability of water for rainfed
rivers is uncertain with changes in precipitation patterns due
to climatic variations. It is important to look into alternatives
which can contribute to a better crop production environment
with the help of sustainable water use approach. The quantity
of water consumed by crops mainly depends upon the
irrigation methods, Agro-meteorological parameters such as
evapotranspiration, and the soil properties (Jacoby et al.
(2017)). The conventional method of irrigation - furrow
irrigation, is shown to have a high rate of evapotranspiration,
low grain yield, and high erosion and leaching of soil from
cultivated land (Sarkar et al. (2012), Bhattacharya (2018)).
Around 40% of the world’s freshwater is consumed by
conventional irrigation methods in the production of rice
(Parthasarathi et al. (2018)).
To reduce water consumption, control over irrigation
practices and soil conditions could be possible. Irrigation
planning is usually done to ensure that the amount of water
supplied to the plants maintains a balance between the
available water for plants in the growth medium (soil, mostly)
and the amount of water consumed by the plant for growth
and transpiration. The factors that can be considered to
maintain the balance are the soil-water potential and the
available water in the soil (Agaba et al. (2011)). Prediction
models for short and long-term water resource management
in irrigation have been developed. Ines et al. (2006) combined
remote sensing-simulation modeling and genetic algorithm
optimization to explore water management options in
irrigated agriculture.
Surface drip irrigation and subsurface drip irrigation have
shown to reduce water consumption by at least 70% (Smith &
Zeder (2013)). (Parthasarathi et al. (2018)) showed that an
aerobic drip irrigation system for rice cultivation could give a
39% higher economic return with a 49% reduced water
consumption. Although subsurface drip irrigation is a very
efficient irrigation method, it has had relatively limited
expansion due to several disadvantages such as the clogging of
emitters, difficulty of detecting leakages and repairing them
(Frantz et al. (2005)).
An alternative approach is the use of soil conditioners.
They help in reduced soil erosion, water retention in soil,
reduction of high infiltration rates, prevention of fertilizer
and pesticide runoffs, and reduction of evaporation of water in
irrigated lands. Recently, several studies have been done
towards the use of soil conditioners in regions with water
scarcity and low precipitation (Narjary et al. (2012)). Farming
communities began to use manure (organic matter), straw
mulch, bitumen (treated and untreated), bitumen emulsions
as soil conditioners but as time progressed, they have started
using polyacrylamide (PAAm), a hydrophilic polymer (Tayel &
El-Hady (1981), De Boodt (1975)). PAAm was first reported to
be used for highway embankment stabilizations using plant
growth in France, where dry unfertile lands were turned to
well established vegetations (De Boodt (1975)). Studies were
done in 1976 using a gelating material under the name verdyol
for soil conditioning. Tayel & El-Hady (1981) proposed a
supergel - a hydrophilic polymer which forms gel immediately
on contact with water, for soil conditioning in sandy soil.
These studies showed that hydrophilic polymers with swelling
properties had the capacity to be built into soil conditioners.
These materials were later developed into hydrogels which
were originally developed for their applications in the medical
industry (Bruck (1973), Kazanskii & Dubrovskii (1992)).
Hydrogels can be defined as three-dimensional polymeric
networks that can retain a significant amount of water within
their structures and swell without dissolving in water
(Jamnongkan & Kaewpirom (2010), Guilherme et al. (2015)).
By modifying the functional groups during synthesis, hydrogels
could be adapted for use as soil conditioners. Soils that are
amended with hydrogel show higher water retention. In most
studies, an increasing concentration of hydrogel shows higher
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
40
water retention in soils (Demitri et al. (2013)). Hydrogel can
act as a water reservoir for plants, and its slow-release
properties can be used to supply micro and macro nutrients to
enrich the soil (Jamnongkan & Kaewpirom (2010)). Its
degradation products can be engineered to improve the
nutrient content of the soil, and thus promote the growth of
symbiotic organisms in the soil (Abd El- Rehim (2006), Devineni
et al. (2013)). The advantages and limitations towards
sustainability associated with the use of hydrogel with respect
to plant growth, and interactions with microbiome, soil and
water are presented in this study.
Classifications of Hydrogel
Classification is necessary for a focused study of any
material. Several hydrogel classifications have been
documented by researchers (Kazanskii & Dubrovskii (1992),
Ahmed (2015), and Ghobashy (2020)). The hydrogel
classifications based on source, synthesis, crosslinking, and
pore size are discussed in this section.
Classification based on Source
Hydrogels are formed by the crosslinking of polymers that
are either naturally occurring or synthetically produced. The
source-based classification is shown in figure 1. The earliest
hydrogels used for agricultural purposes were synthetic, such
as polyacrylamide, polyvinyl alcohol and polyethylene oxide
(Kazanskii & Dubrovskii (1992)) which later were realized to
pose potential environmental hazards (Zhang et al. (2014)).
The synthetic hydrogels are known to possess high swelling
degree, high durability, and slow degradation (Ahmadi et al.
(2015)). Natural polymer-based hydrogels however have a low
structural strength and a low swelling degree. However,
natural-polymer based hydrogels are biodegradable (Ahmadi
et al. (2015)). In some cases, the degradation products even
enrich the soil. To combine the advantages of both natural
polymer-based hydrogel and synthetic hydrogel, the natural
polymers can be crosslinked onto synthetic polymers, giving
rise to a new set of hydrogels.
Figure 1. Source-based classification of hydrogel (Ghobashy (2020)).
For agricultural applications, cellulose based hydrogel is
prepared from its derivative - cellulose ethers which show
biodegradability, and non-toxicity (Ghobashy (2020)).
carboxymethyl cellulose and hydroxyethyl cellulose
(Montesano et al. (2015), Cannazza et al. (2014)) are
examples of cellulose ethers. Novel hybrid hydrogels based on
starch, chitin, tulip extracts have shown promising results in
terms of swelling and degradability (Xiao et al. (2017), Kollar
et al. (2016), Zhang et al. (2014)).
Classification based on Synthesis Method
Several synthesis methods of hydrogel have been
reported in literature. Potentially, any polymerisation
technique that produces crosslinks could be incorporated into
hydrogels preparation. Specifically, solution polymerisation,
graft polymerisation, radiation induced radical
polymerisation, bulk polymerisation, and inverse suspension
polymerisation are widely used and considered as a broad
methodical classification as shown in figure 2 (Ahmed (2015)).
Grafting to support polymerisation is discussed in detail in by
Latif et al. (2016). They made attempts to combine chitosan-
based hydrogel with PAAm, and PVA (polyvinyl alcohol).
Solution polymerisation is well described by Kollar et al.
(2016), where homopolymerisation, and copolymerisation are
carried out with a compound known as tulipalin A (tulip
extract derivative). Bulk polymerisation results in the
formation of a single large matrix which can be prepared in the
desired shape (Ahmed (2015)). Radiation induced crosslinking
is done by irradiating the monomer units with high energy
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
41
radiation such as gamma rays, X-rays, and electron beams. A
study by Katayama et al. (2006), used Acacia senegal seeds for
preparing hydrogel by using electron beams of different
strengths. The method of synthesis and the concentration of
crosslinking agents and initiators involved in the chemical
reactions determine the resulting properties of the hydrogel
such as swelling degree, resistance to temperature, and
response to pH Guilherme et al. (2015), Ahmed (2015)).
Figure 2. Synthesis methods (Ahmed (2015), Kazanskii &
Dubrovskii (1992)).
Classification based on Crosslinking
Crosslinking is a key factor that enables the polymers to
form three dimensional matrices which are elastic in nature
allowing swelling as well as providing stability to the structure
of the matrix. The classification based on crosslinking is
shown in figure 3. Chemical crosslinking is permanent and
gives strength and durability to the hydrogel. This is an
advantageous property for applications under high
temperature, varying pH, and pressure. Physical crosslinks are
reversible because of its ready response to destabilize under
external environmental stimuli. This is a limitation of physical
crosslinking. However, the response to external stimuli is an
advantage for the hydrogel to be used as a smart material in
various applications such as moisture sensors and pH sensors
(Shin et al. (2010), Tellis et al. (2011)). The swelling degree of
the prepared hydrogel is mainly based on crosslinking density
in a given unit of hydrogel matrix. Since higher crosslink
density means lesser length of polymeric chains, and lesser
elastic limit, swelling degree is inversely proportional to the
crosslink density (Guilherme et al. (2015)). This is discussed
in detail in section 3 of the review.
Figure 3. Crosslinking modes (Ahmadi et al. (2015)).
Classification based on Pore Sizes
Pore size is an important property in hydrogels used for
drug delivery and has been dealt in detail by respective
researchers Ahmed (2015), Omidian et al. (2005), Ahmadi et al.
(2015). The classification based on pore sizes is shown in fig 4.
In agricultural, the swelling rate is not the governing factor
for application. Rather, swelling ratio, slow-release kinetics,
and biodegradability are considered during synthesis. Thus, a
glassy matrix with absorption of a few hours (Parthasarathi et
al. (2018)) can still effectively deliver in soil for agriculture.
Figure 4. Pore-size based classification (Chen et al. (1999)).
Stimuli Responsive Hydrogel
Stimuli responsive hydrogels (SRH) are a class of smart
superabsorbent polymers that change one or more of its
properties as a response to a particular change of any of the
environmental parameters such as temperature, overburden
pressure, pH, ionic concentration, osmotic pressure, and
electromagnetic field (Rehman et al. (2011)). Ahmed (2015)
mentions SRH that can be applied in biological, and physical
processes for a variety of applications. Advances in SRH are
mainly developed into biosensors for drug delivery, textiles,
and micro electromechanical systems (Stuart et al. (2010)).
Biocatalytic systems coupled with hydrogel membranes that
deliver specific enzymes in response to biochemical signals and
reactions facilitates fast drug delivery and transport (Tokarev
et al. (2009)). A good photonic crystal hydrogel is one which
undergo a change of colour in response to change in pH. An
interpenetrating photopolymerized hydrogel showed a colour
change within 10 to 20 seconds for pH ranging from 3 to 6
(Shin et al. (2010)). The absorption of water by hydrophilic
polymers in the hydrogel matrix could be used in monitoring
the water content of the surroundings. Such a sensor is
mentioned in recent literatures. Agarose based hydrogel films
incorporated with dapoxyl sulfonic acid (fluorophore) changed
over a range of 30 to 40 nm wavelengths for a 0 % to 100%
change in air humidity and gaseous medium with a 15-minute
response time (Tellis et al. (2011)). Tellis et al. (2011) points
out that the use of environment sensitive fluorophore rather
than the polymer chains or crosslinkers for detection of
environment change enables the incorporation of this property
into a variety of hydrogels to be used as smart materials. This
opens the scope for studies that can exploit the properties for
agricultural applications such as moisture-based release
systems, time-based fertilizer release systems, and enzyme-
based pesticide/fungicide systems.
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
42
Properties of Hydrogel
Ideal Properties for Agriculture
It has been highlighted that the traditional forms of
irrigation in India, such as check basin and furrow types, failed
to perform in a sustainable manner, as they induce wastages
such as evaporation losses, and losses of nutrients from
fertilizers due to leaching, to list a few (Parthasarathi et al.
(2018)). The properties of hydrogel considered in this section
largely pertain to characteristics mediation of which would
effectively improve soil and agriculture performance. The
categories were chosen on the basis that water and nutrient
delivery should be optimized, while the effective use of
hydrogel over the field should be reduced, to save resources
in the form of water, fertilizers and capital. The
characteristics of hydrogel for agricultural applications could
be drawn as follows (Ahmed (2015), Neethu et al. (2018)):
▪ The swelling degree must be high enough so as to
reduce the application of superabsorbent polymer
(SAP). The swollen size of the hydrogel must not
hinder the aeration pores of the soil structure. Thus,
a compromise in the swelling degree of hydrogel must
be made to ensure that there is no detrimental effect
on the aeration pores.
▪ The structure of hydrogel must withstand the
mechanical pressure from the soil and pore water
surrounding it. Synthetic polymers provide durability,
as the degradation of synthetic polymers is low. Thus,
a partnership between the use of natural polymers for
degradability and eco-friendliness, and synthetic
polymers for durability for the required time must be
made.
▪ The hydrogels must be capable of slow release of
water and fertilizers. The slow release must be
predictable to control the management of water for
optimization. The nutrient release must adhere to a
predictable fashion irrespective of environmental
changes.
▪ The hydrogel must act as bio inoculants that enrich
the microbial population that contribute to symbiosis
is the soil.
▪ The hydrogel must be biodegradable. The degradation
products should bear no toxicity to the biota. The
degradation products should enrich the soil fertility.
▪ In view of this, the properties of swelling, slow release,
impacts on soil-plant-microbe, and degradation of
hydrogel are discussed in this review. As seen earlier
in section 2.2 and 2.1, the properties and behaviour of
hydrogel are mainly dependent on the material with
which it is made, and the process of synthesis.
Cellulose based hydrogel prepared from free radical
graft polymerisation of acrylamide and acrylic acid
onto cellulose from mulberry branch extract shows a
swelling degree of 500 (Zhang et al. (2014)). Cellulose
based hydrogel prepared from solution
copolymerisation of carboxymethyl cellulose/Na
showed a maximum swelling degree of about 200
(Sannino et al. (2010)).
Adopted assays for quality assessment of hydrogels are as
follows:
▪ Encapsulation efficiency: The test is carried out to
determine the amount of fertilizer encapsulated in
the hydrogel with respect to the amount of fertilizer
dissolved during synthesis. (Jamnongkan & Kaewpirom
(2010)) uses the equation 1.
100 (1)
where is the unencapsulated amount of fertilizers, γ is
the total amount of fertilizers, and η is the encapsulation
efficiency.
▪ Fertilizer release in water: 75 ml of water is dissolved
with controlled release fertilizers (CRF) and 30 ml of
water is taken out for testing every 24 h, for atomic
absorption spectrophotometry to obtain the amount
of potassium in the sample. Additional 30 ml is added
to it to maintain water availability (Jamnongkan &
Kaewpirom (2010)).
▪ Water absorbency: There are different methods to
determine the water absorbency or swelling (times)
or swelling degree (%). Jamnongkan & Kaewpirom
(2010) and Latif et al. (2016) both reported the
following method: The dry hydrogel is weighed and
immersed in deionised water. At regular time
intervals, the swollen hydrogel is taken out, wiped
gently on the surface with tissue/filter paper to
remove excess water, weighed and re-immersed in
the water. The formula used is 2.
Degree of Swelling SD% =
(2)
Where Ws is the swollen weight and Wd is the dry weight
of hydrogel (Jamnongkan & Kaewpirom (2010), Latif et al.
(2016)).
▪ Water retention in soil: 100g of soil is taken in two
vessels of known weight each, one with hydrogel and
the other without. The amount of water poured in
them should be same and should be kept under
identical conditions. The weight of the soils is taken
in regular intervals (24 hours) for 30 days
(Jamnongkan & Kaewpirom (2010)). Percentage
water content in each day is calculated to get the
moisture release curve.
▪ Water holding capacity of soil: Several pots are filled
with measured amounts of soil, with different
concentrations of hydrogel, and one without hydrogel
(control). Water is filled until percolated water
comes out through the holes. Re-watering is done
thrice to ensure maximum swelling of hydrogel. The
formula used is water holding capacity (WHC) is as
given in equation 3.
%WHC =
(3)
Where Ws is weight of a pot with water saturated soil, Wd
is weight of a pot with dried soil, and Wp is weight of pot
without soil (Rychter et al. (2019)).
Chitosan hydrogel has high biodegradability and low
swelling due to low relaxation rate of polymer chains. A study
done by Jamnongkan & Kaewpirom (2010) compared the
swelling of hydrogel produced by only PVA (synthetic),
PVA/Chitosan blend, and only chitosan (natural); the results
showed that swelling was of the order PVA>PVA/CS>CS. A
blend is necessary to incorporate biodegradability and high
swelling. For their success under Indian conditions, the key
requisites include their workability in harsh tropical and
subtropical climates, particularly with respect to higher
temperature conditions, and a sustained release of water
from their matrices for use by plants. Re-wetting capability,
if required, the hydrogel has to be able to give back the
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
43
imbibed solution or to maintain it; depending on the
application requirement (e.g., in agricultural or hygienic
applications) (Ahmed (2015)).
Swelling Properties
Swelling refers to the property of the hydrogel to retain
water as a virtue of its crosslinking and hydrophilicity. As
these hydrophilic groups helps hydrogel to absorb water
molecules which in turn expands the 3D matrix, this is also
known as swelling. The Degree of swelling therefore can be
attributed to the number of linkages that the particular
hydrogel harbours (Jamnongkan & Kaewpirom (2010), Ahmadi
et al. (2015)). The swelling of the polymerized gum arabic
was estimated according to the Japan Industrial Standard
(JIS) K7223. The initial dry weight of the hydrogel is
measured, and immersed into the solvent for a 16–24-hour
period (for maximum swelling). Subsequently the hydrogel is
drained through a mesh (the pore size varies from 80 - 150
micrometer). Weight of the final residue is measured and
equation 2. Swelling properties measured as a function of
time can be measured using the equation 4
(4)
where the σt=0 is the initial concentration of the solute
without the hydrogel, and σt is the final concentration after
a set period of absorption of the selected hydrogel (Guilherme
et al. (2015)). This may provide an insight into the initial
response of hydrogel in the solvent and could be a preliminary
assay to check the loading capability or, in this case, swelling
(Guilherme et al. (2015)). Fumio et al. (1990) and Ahmadi et
al. (2015) also derives the swelling ratio as a function of
inverse proportion of its cross-linking density upon
polymerization, with the explanation that the presence of
larger spaces within the hydrogel structure helps it hold
greater amount of water in the empty pockets. As the cross-
linking in the matrix intensifies, the Poisson’s ratio reaches
0.5. It causes a reduced swelling degree of the matrix
(Pritchard & Terentjev (2013), Körner et al. (2009), Paul et
al. (2014)). To measure the degree of cross-linking or
effective cross-linking density can be formulated using Flory
and Rehner’s equilibrium swelling theory 5.
[
(5)
Where V1 and V2 are the volume fraction of solvent and
polymer in the matrix, χ is the Flory solvent-polymer
interaction parameter, V l is the specific volume of the
polymer, M
is the primary molecular weight of polymer (before the
crosslinking process) and Mc is the average molecular mass
between crosslinks or the network parameter (Guilherme et
al. (2015)). The ability of hydrogel to swell or shrink can be
controlled to an extent as they display drastic changes in this
property as a response to external physical and chemical
stimuli such as temperature, pressure, sound, pH, solvent
composition, ionic strength and molecular species (Ahmadi et
al. (2015), Fumio et al. (1990)). The importance of the
polymer backbone with respect to the amount of hydrophilic
functional groups it carried was explained by Murphy et al.
(1992), by comparing homogeneous poly (acrylic acid) with 1%
ethylene glycol dimethacrylate cross linking containing
pendant carboxylic acid groups and homogeneous poly (2-
hydroxyethyl methacrylate) polyHEMA at similar crosslink
densities exhibiting equilibrium water capacities (swelling) at
73% to 38%, respectively.
Fumio et al. (1990) has also shown how the number of
freeze-thaw cycles involved in the production of hydrogel also
have an impact by ultimately changing the swelling potential.
The amount of PVA not incorporated in the hydrogel
decreased from 10.6% to 7.0% when subjected to 4 freeze-
thaw cycles. The connections between the polymers also
appeared much more rigid as the number of cycles increased,
as shown through Scanning Electron Microscope (SEM)
imaging. This also resulted in a noticeable reduction of
swelling over increase in the number of cycles. Furthermore,
the degree of swelling of the PVA hydrogel appeared to have
a distinct correlation with reciprocal absolute temperature
and increased almost linearly at most temperatures.
Expansion of the polymeric chain or swelling can be credited
to the phenomenon of migration of solvent molecules into the
cross-linking polymer. Due to the increase in the solvent
concentration inside the polymeric chain, mostly a cause of
osmotic force, the ionic repulsion increases which
consecutively aids in enlargement of the matrix. Polymeric
chain, in opposition to the ionic repulsion, is held together by
the elastic retractive forces. The maximum swelling occurs
when the equilibrium state (i.e., the net force acting on the
matrix becomes zero) is achieved (Guilherme et al. (2015)).
As expansion of the polymeric chain depends on the water
diffusivity, it is then basic to study the diffusion mechanics of
water into the matrix. Using Fick’s law of diffusion, the mass
transfer is measured for a given period of time through a given
medium/space. The following formula is the basic principle
of Fick’s diffusion law 6.
(6)
where flux J is the Net rate of particles moving through
an area, Gradient
is the change in pressure or
concentration over a length and diffusion coefficient K is the
ratio of Solubility to the square root of the molecular weight
(Brazel & Peppas (1999)). A derivative of the aforementioned
formula has been derived as an empirical relation to explain
the diffusion kinetics is Korsmeyer-Peppas model (power law)
7:
(7)
where Mt is the amount of water absorbed/nutrients
released at time t, Meq is the amount of water
absorbed/nutrients released at equilibrium, C is the
characteristic constant, n is the diffusion exponent
characteristic of the absorption/release mechanism
(Jamnongkan & Kaewpirom (2010)). Table 1 gives a brief on
the type of diffusion in correlation with the value of the
diffusion constant. Superabsorbent Polymers (SAPs) and
Superporous Hydrogels.
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
44
Table 1. Range of values of diffusion exponent for different mechanisms of diffusion (Jamnongkan & Kaewpirom (2010))
Diffusion exponent Diffusion characterics
n<0.5 Quasi-Fickian
n=0.5 Fickian
0.5<n<1.0 non-Fickian
n=1.0 Case II transport
(SPHs) are relatively newer classes of polymers. The main
difference between these two lies in the diffusion
mechanisms by which the water enters the hydrogel network.
SAP and SPH both exhibit relatively very fast swelling
properties upon the application of water, however the former
is largely dependent on the size of the particles or samples in
their initial dry states. As the diffusion constant is inversely
proportional to the molecular weight of the solvent, the
diffusivity of such particles has considerable difference. SPH
overcomes this problem by the virtue of the interconnected
open channels they have in their matrices which allow the
water to flow in, regardless of the size of the sample. The
pore sizes in SPHs range in the order of hundreds in their dry
states (Chen et al. (1999)). Another difference observed was
that, toward the end of the drying process where control over
the final drying of SAP is very critical as it affects its final
swelling properties, unlike the process for SPHs, where the
polymerization process is limited to the time of gel formation
(Omidian et al. (2005)). Latif et al. (2016) studies the swelling
of differently prepared hydrogels over time, showing a
distinct superiority of the equilibrium of a hydrogel prepared
by graft copolymerization of acrylic acid (Pg) on PVA,
explaining this phenomenon by the fact that the –COOH
groups in hydrogel molecular structure acted as excellent
hydrophilic groups, and thus facilitated higher concentrations
of water inside in the matrix, also recommending that this
required further research. Certain applications also required
fast swelling of hydrogels, and these have been widely
explored too. Chen et al. (1999) derived hydrogel for drug
delivery whose fast swelling, preferably in 5 – 30 min. The tiny
interconnected pore spaces behaved as capillary tubes (open
channels) within the dry hydrogel matrix, which allowed the
water to diffuse rapidly. This could be explained for SAPs as
a two-phase process where water molecules are first
accumulated on the outer layer, creating a state of duality of
dry hydrogel and partially swollen. Water continues to diffuse
into the hydrogel pores towards its centre. SPHs bypass the
first process due to the continuous movement of water
through its channels immediately, resulting in faster swelling
(Omidian et al. (2005)). Many studies have indicated a change
in equilibrium swelling potential over hydration and
rehydration cycles, mostly notably in agriculture related
studies. This could be attributed to the increasing salinity of
water, due to fertilizer and soil-water salt interactions, being
absorbed by the hydrogel themselves (Cannazza et al. (2014),
Demitri et al. (2013)). Division in the H- bonds due to low pH,
resulted in increased swelling degree in chitosan-based
hydrogel (Jamnongkan & Kaewpirom (2010)).
Water Retention Properties
For agricultural purposes, an ideal hydrogel would ideally
be averse to degradation and hold water under loading
conditions and for longer periods of time, in order to deliver
water to the plant root hairs only under the latter’s potential.
This is one reason SAPs are used in agricultural facilities as
the amount of water retained under pressure is relatively
exceptionally high (Omidian et al. (2005)). SAPs prepared as
nonporous hydrogels find remarkable applicability in
agriculture as this property also imparts mechanical stability
to the polymer and prevents breakdown under sustained soils
loads when dispersed in it (Omidian et al. (2005)).
To determine the capacity of the SAP to act as soil
conditioner, the SAP samples are submitted into an
environment in which the difference in pressure between the
soil and the root of vegetables is simulated. A way of doing
this is to measure the water uptake at different pressures.
The hydrogels are added into a vessel with Richard
membrane-covered walls. The water is withdrawn from
hydrogels by increasing the pressure of the vessel. The data
of water content can be obtained as a function of water
retention (given in kg water per kg hydrogel) under pressure
given in hecta Pascal (hPa) (Guilherme et al. (2015)). The
release kinetic can be changed by adding inorganic particles
into hydrogel. The particles, when sufficiently dispersed,
cause a tortuosity effect that disturbs the release of solutes.
Such an effect gives longer pathways that difficult the
diffusion of the solute toward the outside hydrogels. The
particles play a role as a retardant factor for drug release
(Guilherme et al. (2015)). Studies have however shown
exceptional advances in this specific trait. Chen et al. (1999)
developed hydrogels for oral drug delivery that showed
resilience for 24 to 60 hr in canine stomachs.
Experiments conducted by Cannazza et al. (2014) show
the water retaining capability through its release of a
synthetically manufactured hydrogel swollen with tap water
to be higher after the 5th day than distilled water,
speculating that the fixed electrostatic charges on the
polymer network. The presence of mineral clay on hydrogels
without the hydrolysis treatment, delayed the nutrient (e.g.,
urea) desorption in quite a significant way. However, an
important factor was that, for the hydrolyzed hydrogels,
desorption time and the amount of nutrient desorbed
increased significantly (Guilherme et al. (2015), Ismail et al.
(2013)). As reported in a study focused on the same class of
hydrogel used in the present research, the hydrogel swelling
is reduced with increasing electrical conductivity; therefore,
we can expect a reduced ability to improve the water
retention capacity of the substrates in actual cultivation
conditions, especially when the substrate electrical
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
45
conductivity tends to increase with the progress of the crop
cycle (Montesano et al. (2015)).
Slow-release Properties
Studies indicate that the dominant contributor for
surface water eutrophication and groundwater nitrate
enrichment is the uncontrolled release of agricultural
nutrients, herbicides and pesticides on soils. The most crucial
and indispensable nutrients for planting soils include
potassium, calcium, iron, copper, nitrogen, phosphorus,
sulfur and boron, although it is estimated that around 40 - 70
% of nitrogen and 50 - 70 % of potassium are lost by leaching.
High quantities of nutrients are not absorbed by plant roots.
Thereby, the main aim of using coated fertilizer granules and
crosslinked chemically polysaccharide-based hydrogels in the
controlled nutrient release on soils is the decreasing the loss
of nutrients by leaching and mitigating environmental
problems (Guilherme et al. (2015)). Moreover, the use of
controlled release fertilizers causes an increase in their
efficiency, reduces soil toxicity, minimizes the potential
negative effects associated with overdosage and reduces the
frequency of the application. Two methods, post and in situ
loading have been reported for the loading of nutrients onto
the polymer matrix. The in-situ approach is preferred over
post-loading one because of the greater loading efficiency.
Jamnongkan & Kaewpirom (2010) reported a high efficiency
of more than 99% for in-situ loading. The water within the
hydrogel dissolves the nutrient, which can diffuse through the
polymer network. The movement of solutes toward the
outside of the hydrogel can be related with swelling rate.
Only a small amount of the load is released. As a result, a
portion of loaded solute is preserved when the hydrogel dries
in the intervals of irrigations or rains. The release is again
activated in the further watering processes, thus providing a
prolonged release process that can prevent the leaching. It is
also possible to load two or more active substances onto
hydrogel so that each one of them may have specific release
kinetic. The fraction of nutrient, herbicide, pesticide or other
solute released from chemically crosslinked hydrogels may be
calculated as given in equation 8 (Guilherme et al. (2015)):
(8)
The release profiles from coated granules are divided in
three main steps: i) initial stage with no significant nutrient
release, ii) constant release from medium intervals, and iii)
gradual decay of the release rate from the longer release
period. A mathematical model based on Fick’s second
diffusion law, based on the nutrient release profiles as a time
function, was developed to predict the release rate of
polymer-coated fertilizer using a numerical solution and
Fourier series expansion. The release time t’ during the initial
stage was defined by the equation 9
(9)
where γ is the total granule porosity including also voids
between the nutrient core and the membrane; Ph is water
permeability of the membrane (in mm2 Pa−1 Day−1); P is the
vapor pressure difference between water and saturated
nutrient solution (in Pa); and r is radius of diffusion (in mm)
in the coated granule (Guilherme et al. (2015)). The nutrient
release process is attributed to the diffusion behavior of the
hydrogel itself, where the fertilizer is encapsulated within a
water medium inside the hydrogel, and is released alongside
it when the hydrogel starts de-swelling, as illustrated by
(Ghobashy (2020)). It has also been insinuated that Smart
Biodegradable Hydrogels are used to coat fertilizer in order
to control the release of nutrients, which vary according to
certain parameters themselves, like the temperature of the
media, observing a higher release for increasing
temperatures. Pure polysaccharides degrade very quickly in
soil, and therefore cannot be used as nutrient carrying
vehicles (Zhang et al. (2014)). Therefore, they are processed
to make semi-synthetic hydrogels, as discussed earlier.
Natural polymers such as starch and cellulose are used to coat
fertilizer granules such as Urea in order to make slow-release
nutrient derivatives (Ghobashy (2020)). Hydrogel coatings
that release only 15% of the total Urea after 1-2 days of
application have also been derived, in order to minimize
undesirable fertilizer leaching into the soil (Zhang et al.
(2014)).
Soil - hydrogel Interaction
Impact on Soil Properties
Hydrogel improves the water retention of soils in arid and
semi-arid zones, and supplements agriculture by increasing
the amount available in the root zone depth to plants, further
increasing the amount of time between successive irrigations.
Soil - water relationships are quantified by parameters such
as soil water potential, soil water capacity (SWC), available
water capacity (AWC), and readily available water capacity
(RAWC). Soil water capacity could be calculated from the
guidelines given in IS 2720 (1983) and other standards. The
available water capacity of soil is calculated from the amount
of water removed from suction between the pressures of 30
kPa and 1500 kPa. The readily available water capacity of soil
is measured from the difference in water content at 10 kPa
and 100 kPa (Narjary et al. (2012)).
In a study done by Narjary et al. (2012), different types
of soil were treated with 0.4% and 0.7% hydrogel by weight.
The AWC and RAWC water for the control group of the soils
and the treated soils were measured. In all, the values of SWC
were highest for the 0.7% mix of hydrogel and soil. The
hydrogel treated soil reached critical soil water capacity only
after 22 days in sandy soil (Narjary et al. (2012)). In a study
by Agaba et al. (2011), the water retention was so high that
for a period of 69 days, the soil required watering just once
in the beginning to sustain the grass species Agrostis
Stolonifera. Montesano et al. (2015), have shown how the
application of 1-2% w/w of hydrogel in sandy soils (91.5%
sand, 4.2% silt and 4.3% clay) had a very positive impact on it
by doubling, and even quadrupling the soil water holding
capacity, making it comparable to even silty clays and loamy
soils (Katayama et al. (2006)). Rychter et al. (2019) showed
through experimental analysis of soil-water-hydrogel setup by
conducting water holding capacity test and water retention
test. The results from this study by Rychter et al. (2019) show
significant increase in the water holding capacity of soils with
high hydrogel content (0.1% w/w), and the water retention
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
46
was at least thrice that of the soils without hydrogel. Soil
conditioners based on naturally occurring polymers such as
guar have been shown to prevent surface crusting of soil
(Wallace (1986)).
Hydrogels provide the soil texture and porosity necessary
for optimum air and water flow in the soil, and release the
stored water when the soil is dried up. All of this facilitates
the maximum growth potential for plants (Guilherme et al.
(2015), Ghobashy (2020)). This is partly due to the fact that
leaching of water through gravity in the soil particles is
partially suspended by the swollen hydrogel particles in the
voids of the soil. It is known that the soil porosity is not
affected unless the size of the swollen hydrogel particles or
clusters are in the range of centimeters (Chen et al. (2004)).
The porosity of soil should not be less than the critical value
of 10% for plant growth (Narjary et al. (2012)). However,
minimal use of hydrogel is advised for soils with high moisture
retaining capacities, as it may hinder plant root aerobic
interactions (Parthasarathi et al. (2018)). The presence of
hydrogel increases the soil porosity that provides a better
oxygenation to the plant roots (Guilherme et al. (2015)).
Field level experiments have been done by Abrisham et
al. (2018) by the use of a potassium polyacrylate based
hydrogel - stockosorb on S. rosmarinus Bunge ex Boiss.
(Amaranthaceae) for the evaluation of effects on properties
of sandy loamy soil and plant growth. The study by Abrisham
et al. (2018) showed a decrease in infiltration capacity,
increase in cation exchange capacity and a decrease in bulk
density. In many areas, particularly in Egypt, hydrogels are
being experimented upon as a utility to ameliorate the effect
of extremely saline soils on plant growth, caused due to
irrigation with saline water and poor permeability and
drainage, to list a few (Chen et al. (2004), SAYED et al.
(1991)). SAYED et al. (1991) indicates a decrease in ionic
uptake from saline treatments due to reversal of ionic osmotic
exchange between plant-soil-hydrogel chains. Chen et al.
(2004) showed that the water content of saline soil amended
with hydrogel increased by 41%. Moreover, the saline
concentration of the soil was reduced in soils amended with
hydrogel.
Hydrogel Impacts on Microbial and Fungal
Growth
Microorganisms in the soil matrix play a crucial role in the
nutrient pathway for plant uptake. Many bacteria and other
single and multicellular species break down the complex
nutrients inside the soil and release it to the roots of the
plants in its vicinity. A plant root system has a complex
interaction with its environment such as rhizobium fauna,
fungi, and bacteria. Hence, a healthy population of nitrogen
and other nutrient fixing bacteria is tantamount to optimizing
the overall yield of the plant (Jacoby et al. (2017)). This
ecosystem is important for a sustainable environment for
plant growth as this combination in the ecosystem ensures a
natural equilibrium between nutrient transfer and survival of
each species. As most of these organisms propagate in
aqueous situations, the availability of moisture in the form of
entrapped water in hydrogels help create incubation tanks for
the same.
The interaction of microbes with hydrogel involves
complex reactions and exchange of enzymes. The microbes
are exposed to nutrient release and degradation products of
hydrogel. Since symbiosis is essential for plant growth,
hydrogels applied for agricultural productivity should pose no
toxicity to the symbiotic organisms. The hydrogels thus
require to be tested for any sort of negative effects on
microbes.
Cytotoxicity test, and high through-put genome
sequencing of soil microbes are popular methods adopted for
the evaluation of the effect of hydrogel on microbial
communities (Rudzinski et al. (2002), Sannino et al. (2010)).
Cytotoxicity test used to measure the extent of damage which
the hydrogel, its extract, or its monomers can cause on a
living cell and is done using a colorimetric assay based on
MTT, a tetrazolium salt (Mosmann (1983)). The test compares
the cell viability as a function of concentration compared with
Polyethyleneimine (PEI) as control (Kollar et al. (2016)).
A study done by Rudzinski et al. (2002) mentions the use
of a genome sequencing method called Illumina MiSeq
sequencing, where the genomes of existing microbial
communities are measured in soils in the presence of Sodium
polyacrylate hydrogel under 4 different conditions of soil
moisture. The study by Rudzinski et al. (2002) showed that
the diversity of microbes increased with the addition of SAPs
and that soil moisture content played a greater role in
deciding the degradation of SAPs. Saturated water treatment
showed a release of toxic compounds, while severe drought
treatment showed a decrease in pH. This discourages the use
of PAAm based hydrogels for agricultural purposes. However,
polyacrylate-based PUSA hydrogels were used as
bioinoculants in a study done by Suman et al. (2016) where
the shelf life of microorganisms was boosted from 3 months
to 2 years in controlled conditions and the treatment of the
select cultures of microbes and hydrogel showed positive
effects on plant growth. Although positive effects are
observed in the immediate crop production as shown in many
studies, the toxicity at longer time periods after degradation
requires to be given sufficient scrutiny. Considering the
uncertainty projected here, the effects of toxicity of natural
polymer-based hydrogels needs to be studied in detail. Starch
based hydrogels undergo fermentation, producing sugars,
which serve as food for many microbe species. The total
microbial count for Actinomycetes, Azotobacter, total fungi,
phosphate dissolving bacteria, and Azospirillum progressed
when applied to sandy calcareous soil (El-Hady et al. (2011)).
Kollar et al. (2016) used MTT assay for AM-SHMB (tulipalin A
based) hydrogel, its monomers and extract and found that
AM-SHMB doesn’t cause toxicity to the cells, or doesn’t
damage the viability of the cells for 3, 5, and 10 mg/ml of
concentrations. Genome sequencing on the other hand is only
recently used for agricultural purposes. Another study, by
Sannino et al. (2010) showed through MTT assay, that
cellulose-based hydrogels have no toxicity towards cell
viability. A study by Achtenhagen & Kreuzig (2011) showed
that there is an increased microbial activity with the
application of hydrogels under deficit conditions. Many
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
47
microorganisms contribute majorly to the degradation of the
hydrogels themselves, and promote microbial survival.
Ghobashy mentions the desirability of aerobic bacteria in soils
that fix oxygen to the root systems, and discusses the
converse of the anaerobic type, citing their parasitic nature
that often leads to competition between the plant and the
bacteria themselves for mineral nutrients and nitrogen,
leading to diminished plant growth (Ghobashy (2020)).
Hydrogel Impact on Plant Growth
It is important to examine the effect of the altered soil
water interactions due to the application of hydrogel on the
growth of the plant themselves. A large number of studies
have been carried out in this regard in the field of Agronomy.
Hence, a sufficient number of results are available to
compare the standard methods of cultivation with those that
have been augmented with the use of hydrogel, based on a
variety of plant growth parameters. The hydrogel is applied
to the plants by different methods: either seedlings or seeds
are coated with hydrogel, or hydrogel is mixed with the soil
adjacent to the sown plants (Kazanskii & Dubrovskii (1992)).
The hydrogel binds strongly to the roots of the plants in many
cases, and thus enhances the nutrient environment around
them. However, the methods can prove counterproductive,
as the swollen hydrogel has the chance of blocking soil pores
required for aeration resulting in seedling mortality
(Ghobashy (2020)). In general, hydrogels have shown to be
largely favourable when used to aid cultivation. There are no
reported phytotoxicity cases, notably manifested through
increased germination indices of many vegetables as well as
ornamental species when treated with hydrogels. Trials on
cucumber showed an overall increase of over 30cm in plant
height, as well as increasing the plant and fruit fresh biomass
(by weight) almost twofold (Montesano et al. (2015)). Since
the production of chlorophyll is linked to water availability,
plants growing in soils without hydrogels have shown
significant decrease in chlorophyll content as compared to
when hydrogel is applied in soils. Plant defenses against
diseases have also been shown to be increased by the action
of hydrogel, curbing the actions of a variety of
phytopathogens, as well as inhibiting the growth of nutrient
intensive fungi species (Ghobashy (2020)). Chen et al. (2004)
observed 3.5 times increase in root length and area of tree
seedlings when saline (Potassium mine refuse) soils was
amended with hydrogels. Since vitality of the plants grown is
generally quantitatively measured with respect to certain
established independent parameters, this section will try to
combine findings from different studies performed on the
plants. Plant parameters generally measured as an indicator
of its growth potential includes, but are not limited to:
•
Water Use Efficiency
•
Dry Biomass Weight
•
Number of days to Wilting point
•
Germination Index
•
Root length/surface area
•
Shoot length
•
Chlorophyll content
•
Plant height
•
Turgor potential
•
Yield weight
•
Leaf Water Content
• Impact on plant species
• Maize
Higher seedling growth for Zea mays cv. ‘tri-hybrid 311’
in sandy soils in Egypt was observed for higher consequent
concentrations of hydrogels added, with 0.4% having the
highest growth recorded. Water content of the root and
shoots showed an increase of at least 19% and goes to around
50% and even 70%, yielding higher average values for higher
concentrations of hydrogel. An increase of fresh weight up to
1.56 to 7.9 times was also observed compared to its
respective control (Mazen et al. (2015)).
• Tomato
Levels of Chlorophyll A and B doubled for Lycopersicon
esculentum Mill. species of tomato when Cross-linked Poly
(ethylene oxide) co-polyurethane hydrogel was applied to the
extremely saline sandy soils they were planted in. This was
also accompanied by a consistent increase in photosynthetic
activity, measured as a degree of O2 evolution, in the same
trials (SAYED et al. (1991)). Tomatoes (Pomodoro di Morciano
di Leuca) were tested over 3 months in the Mediterranean
region (province of Italy) with cellulose based SAP in red and
white soils. Initially tomatoes were kept in pots and
subsequently transferred to large wooden boxes to mimic
open field condition. Differing concentrations from 0.2% to a
maximum of 1.5% of the SAP was applied to the surface of the
soil in each box, and only half the amount of water was
supplied to the boxes containing SAP compared to the ones
without (120L of water to non-SAP vs 60 L to SAP). The 0.2%
hydrogel and control groups bore smaller and wrinkled leaves
compared to the rest of the groups with higher SAP
concentrations, even with the massive reduction in the
amount of water supplied to the latter. The fruit size
remained approximately the same (Demitri et al. (2013)).
• Cherry Tomato
Cellulose based hydrogel with 4 concentrations up to 1%
by wt. were mixed into red soil to assess its effect. It was
initially observed that the plants reached their wither point
when their respective soils reached a water content of 10-
20%. Based on this, the control group was shown to take only
4-5 days to reach this stage. An addition of just 0.2% hydrogel
increased this to 9 days, while the maximum concentration of
1% increased that further to around 22 days to wither (Demitri
et al. (2013)).
• Populus Euphratica
Plants treated with 0.6% Stockosorb K 410 hydrogel
showed a 2.7 times biomass increase over control in saline
conditions, over a test period of 2 years. Root length and
surface area were also reported to increase 3.5 times (Chen
et al. (2004)).
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
48
• Wheat
Studies were conducted on wheat (Triticum aestivum L.)
irrigation aided with lignite, liquids and hydrogels to assess
their microbial and plant growth. Pusa hydrogel used in
the experiment reported the highest root and shoot length,
as well as the highest fresh and dry weights at 45 and 90
DAS (Suman et al. (2016)). Studies done in sandy calcareous
soil from Egypt on the effect on 4 different types of hydrogels
also examined its effects on the rhizosphere of the same
species of wheat, concluding that it helps increase in growth
promoting bacteria, and also boosts enzymatic activity in the
plant surrounding. Applications of 2.5g/kg of hydrogel in the
soil showed better results for the same as compared to 5g/kg,
increasing the phosphate dissolving bacteria, total fungi and
actinomycetes count to around 200% that of the control (El-
Hady et al. (2011)).
• Cucumber
Researchers showed the ability of a cellulose-based
hydrogel to increase the germination indices of radish,
cucumber, Alyssum, and Centaurea seeds well above the
required 60% (set as a benchmark for signs for phytotoxicity),
with cucumber trials reaching upwards of 140%. Pot
cultivation trials done of the same showed similar positive
results at 35 days after transplant, with 113% increase in plant
height, 192% increase in total fresh biomass, 242% increase in
fruit biomass, and 162% increase in leaf area. They also
expressed higher leaf water potential and turgor potential
values when subjected to controlled water stress (Montesano
et al. (2015)). In addition, studies done by SAYED et al. (1991)
also showed growth of cucumber in extremely saline solution
concentration soils of up to 32,000 ppm with the addition of
hydrogel, which would be otherwise previously severely
impeded in the absence of hydrogel.
• Basil
It has been observed that there was 156% increase in
fresh weight at 46 DAS was found for perlite amended with 3%
cellulose-based hydrogel as opposed to unadulterated perlite.
This number is increased to 177% when 6% hydrogel
concentration is used instead. However, this difference
becomes less drastic at 63 DAS, showing only a 113% increase
in the same parameter (Montesano et al. (2015)).
• Brassica Rapa
0.15% SAP powder used to amend potted soil with
fertilizers was shown to give 10% extra yield compared to
control over three cycles of sowing and harvest over 30 days.
This is significant as no extra hydrogel is added after the first
incorporation into the soil, and can potentially use as an
indicator of the reusability of the hydrogel itself (Shimomura
& Namba (1994)).
• Lettuce
Studies conducted by Woodhouse and Johnson on Lactuca
sativa (cv. ’Webb’s Wonderful’) showed a significant jump in
the number of days to wilting point from 2 in control to 15
days for sandy soils amended with PVA hydrogel at the max
concentration of 0.5% w/w. Dry weight of lettuce increased
six-fold under addition of Polyacrylamide hydrogel from 8 mg
per pot to 49 mg per pot of sandy soil. Water use efficiency,
another excellent indicator of plant growth efficiency, also
had 3-fold growth over its respective control in the
experiment (Woodhouse & Johnson (1991)).
• Agrostis Stolonifera
Experiments done on this species of grass in pots with
sand from a sand pit in Schoningen, Germany with 0.4%
Luquasorb hydrogel showed an increase in the root and shoot
biomass measurements by 4 and 2.2 times, respectively. The
water use efficiency also was observed increased by 8 times
from 1.56g/L to 13.7g/L. The total amount of water used was
also lessened by 3 times from 24L in control to 8.4L in 0.4%
hydrogel concentration (Agaba et al. (2011)).
• Faba bean
The effect of irradiated polyacrylamide and PAAm/Na-
alginate copolymer hydrogel was assessed with the help of the
growth of faba bean (Vicia faba L. Family: Leguminosae) in
semi-potted sandy soil in Egypt and showed clear higher
biomass and plant height measurements at 9 weeks after
sowing (Abd El-Rehim (2006)).
Hydrogel Degradability
Non degradability of most synthetic hydrogels can pose
environmental threat. The problem of degradation arose with
extensive application of hydrogel polymers in the medical
industry. Two ways for the degradation of synthetic polymers
were identified - introduction of functional groups in the
crosslinks of hydrogel that can undergo hydrolysis; and
exposure of hydrogels to enzymes that can break the polymer
backbone of the hydrogel matrix (Meyvis et al. (2000)).
Research had been conducted to evaluate the effect of
degradation on the swelling of hydrogel. The swelling is
affected by the mechanism of degradation. In the former case
where the crosslinks are degraded, the density of crosslinks
in the matrix reduces resulting in an increased swelling until
a stage where the hydrogel becomes unstable. In the latter
case of enzymatic degradation of polymer backbone, the
crosslinks remain with no loss of crosslinking density in the
hydrogel matrix, resulting with no changes in swelling until it
drops after the matrix destabilizes (Meyvis et al. (2000)). In
view of application in agricultural lands, as seen in section
4.2, the hydrogels in soil serve as sources of carbon and
medium for locomotion for microbes in the soil. The microbes
feed on the substances that the hydrogel is made of as well
as the compounds released after the collapse or degradation
of the hydrogel matrix. Thus, biodegradation is a possible
option and arguably the most coveted degradation mechanism
for hydrogels. Chitosan was the first explored material with
respect to biodegradability in hydrogels since it had better
mimic of cell behavior. Chitosan is N-deacetylated chitin
which is found in various bacteria, fungi, and crustaceans
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
49
(Qureshi & Khatoon (2015)). Qureshi & Khatoon (2015)
conducted a 12-week open environment degradability test of
chitosan-based hydrogel with soil. It proved the
biodegradability of the same.
Biodegradability is a sought-out property for hydrogel to
be applied in agriculture and could be a sustainable
mechanism. Several studies have been done to assess variety
of hydrogels for biodegradability. Natural polymer-based
hydrogels degrade easily in soil, while synthetic polymers take
very long to degrade as detailed in section 2.1 (Jamnongkan
& Kaewpirom (2010)). Over the past few decades, the
preparation of super absorbents has been primarily based on
synthetic polymers such as acrylic acid (AA) or acrylamide
(AM), which could be potential environment hazards due to
their poor biodegradability (about 10% per year) (Cannazza et
al. (2014), Zhang et al. (2014)).
In section 4.2, the products of pyrolysis of polyacrylate
based hydrogels have been mentioned. The compounds of
degradation from biodegradation as well as pyrolysis were
similar with varying fractions of hydrocarbons and fatty acids.
Some products of pyrolysis were unique such as long chain
amides, esters, silanes, and sulfonyl groups (Rudzinski et al.
(2002)) which pose toxicity to the biota and environment. It
is argued that while polyacrylates are nontoxic, only the
monomer acrylamide is toxic. The degradation products of
this polyacrylate cellulose based hydrogel are said to be
carbon dioxide and amines only and could be identified by use
of carbon 13 isotopes (Wilske et al. (2014)). The C=O group
was labelled with carbon 13 isotope for every 5 crosslinks. The
amount of carbon 13 detected in the carbon dioxide emitted
from the soil hydrogel sample at regular intervals showed that
the overall degradation was less than 1% in 6 months (Wilske
et al. (2014)). A study done by Stahl et al. (2000) explored
the biodegradability of polyacrylate and polyacrylamide
copolymer with white rot fungus in soil along with soil
microbiome. The study showed that the microbial
degradation was very low when compared to fungal or fungus-
microbe coupled degradation. However, degradation was
sufficient to validate. In an open environment degradation
study, it was unequivocally presented that the degradation of
the polymer-based hydrogel occurred due to microbial action.
Studies also verified the change in swelling properties of
the hydrogel over a period of time. Fourier transform infrared
spectroscopy, differential scanning calorimetry,
thermogravimetric analysis, x-ray diffraction, and field
emission scanning electron microscopy were conducted to
gain insight into the microscopic structural changes (Qureshi
& Khatoon (2015), Meyvis et al. (2000)). These provide data
on the development of structural characteristics, which can
be reviewed to examine the deterioration of the gel
backbone. Porosity, shape and surface variations were
reviewed using scanning electron microscope in the studies.
Freezing and drying process was used to preserve the
morphology of the Gel section (Montesano et al. (2015)).
Small depositions were detected, which were construed as
microorganisms after decomposition of the substrate. It was
observed that the hydrogel using nutrients for microbial
growth had helped in rapid decomposition (Qureshi & Khatoon
(2015)).
Several commercially available hydrogels are based on
polyacrylates with few alterations to the polymer backbone
with cellulose (Kalhapure et al. (2016)). The insufficiency and
contradicting results arise from studies done from different
approaches. There is a need for establishing an integrated
approach towards testing degradability by microbes, and
identification of residual degradation compounds from
pyrolysis and microbial degradation. The integration would
help in determination of short term and long-term toxicity or
nontoxicity of hydrogels. This problem could be eliminated by
a shift towards using natural polymers completely replacing
synthetic polymers which require special enzymes for
effective decomposition. It could be favourable for
sustainable agriculture practices.
The degradation products and the monomers extracted
from AM-SHMB (tulipalin-A based hydrogel) showed no
cytotoxicity on fibroblast cells (Kollar et al. (2016)). Cellulose
based hydrogel degrades easier in sandy soils under the action
of soil microbiome enhanced with nutrient release (Nie et al.
(2004)). A study done by Ekebafe et al. (2011) investigated
the process of degradation of gum tragacanth-acrylic acid-
based hydrogel by soil microbiome and observed a 92%
degradation in 10 weeks. The study found that the
degradation products enhanced the carbon content,
phosphorus and potassium contents of the soil which
promotes plant growth. A slight decrease in pH of about 1.5%
(within limits) was observed. A similar study by Saruchi et al.
(2016) showed significant increase in plant nutrients
availability in soil with a 3% increase in pH. The variability is
a result of soil properties and existing conditions. Since the
variability is within limits, it can be neglected. The breaking
down of several polymers into respective monomers with the
release of nutrients in the soil increases nutrient efficiency
and availability of the soil.
Conclusion
Agricultural sustainability is essential to enhance food
and water security, particularly in the context of climate
change. In the recent past application of hydrogels in
agriculture have received substantial attention among
researchers as well as among farmers. Like its medical
applications, a wider scope for hydrogels has been identified
in agriculture. Hydrogel could be envisaged as an effective
soil conditioner in arid and semi-arid regions. It would
enhance soil texture; provide the required porosity for
optimum flow of air and water; mitigates the effect of soil
salinity on plants; and release of stored water in dried soil.
As the typology of materials is of importance for research and
development, the study makes an attempt to present various
hydrogel classifications. Ideal properties to be considered for
synthesis of hydrogel agricultural application have been
identified. There exists a tradeoff between natural and
synthetic polymers for their degradability and durability.
Comparative studies on the growth of plants have been
proven to be extremely valuable. Hydrogels are good soil
conditioners which can improve water use efficiency, plant
health and yield, and can reduce irrigation water
requirements. Hence hydrogel application would be
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
50
beneficial for crops such as paddy and wheat which have large
water footprints.
Further studies could definitely be conducted on
developing hydrogels which can mitigate the effect of saline
soils on the crop growth. Novel stimuli-responsive hydrogels
with release mechanisms based on moisture and time, for
efficient use of fertilizers, pesticides, and fungicides. Natural
polymer-based hydrogels should be studied in detail in view
of improving biodegradability and water retention capacity.
Such an understanding would help nations such as India for
increasing the irrigation efficiency and soil conditioning for
sustainable agricultural production. Further studies on the
laboratory test methods on the hydrogel durability is found to
be necessary to make it affordable for the farming
communities and for its cost-effectiveness while scaling up to
the farm level. Discussions on hydrogel properties and
degradation show that there is a need to develop an
integrated framework for test methods of various properties,
for effective comparison of results for agricultural use. With
adequate further studies we foresee the popularity of
hydrogels among the farming communities for various crops.
Integrating innovative solutions with environmentally-friendly
hydrogels in the coming decade will contribute to the pursuit
of achieving sustainable development goals.
References
2720, I. (1983), ‘Methods of test for soils–determination of
density index for cohesionless soils’.
Abd El-Rehim, H. A. (2006), ‘Characterization and possible
agricultural application of polyacrylamide/sodium
alginate crosslinked hydrogels prepared by ionizing
radiation’, Journal of Applied Polymer Science 101(6),
3572–3580.
Abrisham, E. S., Jafari, M., Tavili, A., Rabii, A., Zare Chahoki,
M. A., Zare, S., Egan, T., Yazdanshenas, H.,
Ghasemian, D. & Tahmoures, M. (2018), ‘Effects of a
super absorbent polymer on soil properties and plant
growth for use in land reclamation’, Arid Land
Research and Management 32(4), 407–420.
Achtenhagen, J. & Kreuzig, R. (2011), ‘Laboratory tests on
the impact of superabsorbent polymers on
transformation and sorption of xenobiotics in soil
taking 14c-imazalil as an example’, Science of the
total environment 409(24), 5454–5458.
Agaba, H., Orikiriza, L. J., Obua, J., Kabasa, J. D., Worbes,
M., Hüttermann, A. et al. (2011), ‘Hydrogel
amendment to sandy soil reduces irrigation frequency
and improves the biomass of agrostis stolonifera’,
Agricultural Sciences 2(04), 544.
Ahmadi, F., Oveisi, Z., Samani, S. M. & Amoozgar, Z. (2015),
‘Chitosan based hydrogels: characteristics and
pharmaceutical applications’, Research in
pharmaceutical sciences 10(1), 1.
Ahmed, E. M. (2015), ‘Hydrogel: Preparation,
characterization, and applications: A review’, Journal
of advanced research 6(2), 105–121.
Allen, M., Dube, O., Solecki, W., Aragón-Durand, F., Cramer,
W., Humphreys, S., Kainuma, M., Kala, J., Mahowald,
N., Mulugetta, Y. et al. (2018), ‘Framing and context’,
Global warming of 1, 49–91.
Bhattacharya, A. (2018), Changing Climate and Resource Use
Efficiency in Plants, Academic Press.
Brazel, C. S. & Peppas, N. A. (1999), ‘Mechanisms of solute and
drug transport in relaxing, swellable, hydrophilic glassy
polymers’, Polymer 40(12), 3383–3398.
Bruck, S. D. (1973), ‘Aspects of three types of hydrogels for
biomedical applications’, Journal of Biomedical
Materials Research 7(5), 387–404.
Cannazza, G., Cataldo, A., De Benedetto, E., Demitri, C.,
Madaghiele, M. & Sannino, A. (2014), ‘Experimental
assessment of the use of a novel superabsorbent
polymer (sap) for the optimization of water
consumption in agricultural irrigation process’, Water
6(7), 2056–2069.
Chen, J., Park, H. & Park, K. (1999), ‘Synthesis of superporous
hydrogels: Hydrogels with fast swelling and
superabsorbent properties’, Journal of Biomedical
Materials Research: An Official Journal of The Society
for Biomaterials, The Japanese Society for
Biomaterials, and the Australian Society for
Biomaterials 44(1), 53–62.
Chen, S., Zommorodi, M., Fritz, E., Wang, S. & Hüttermann, A.
(2004), ‘Hydrogel modified uptake of salt ions and
calcium in populus euphratica under saline
conditions’, Trees 18(2), 175–183.
De Boodt, M. (1975), ‘Use of soil conditioners around the
world’, Soil Conditioners 7, 1–12.
Demitri, C., Scalera, F., Madaghiele, M., Sannino, A. &
Maffezzoli, A. (2013), ‘Potential of cellulose-based
superabsorbent hydrogels as water reservoir in
agriculture’, International Journal of Polymer Science.
Devineni, N., Perveen, S. & Lall, U. (2013), ‘Assessing chronic
and climate-induced water risk through spatially
distributed cumulative deficit measures: A new
picture of water sustainability in india’, Water
Resources Research 49(4), 2135–2145.
ECOSOC, U. (2019), ‘Special edition: Progress towards the
sustainable development goals report of the secretary-
general’, Advanced unedited version. New York (US):
United Nations.
Ekebafe, L., Ogbeifun, D. & Okieimen, F. (2011), ‘Polymer
applications in agriculture’, Biokemistri.
El-Hady, O., Abo-Sedera, S., Basta, A. & El-Saied, H. (2011),
‘The role of rice straw-based hydrogels on some soil
microorganisms’ strains’, Bio 1, 78–84.
Frantz, J. M., Locke, J. C., Pitchay, D. S. & Krause, C. R. (2005),
‘Actual performance versus theoretical advantages of
polyacrylamide hydrogel throughout bedding plant
production’, Hort Science 40(7), 2040–2046.
Fumio, U., Hiroshi, Y., Kumiko, N., Sachihiko, N., Kenji, S. &
Yasunori, M. (1990), ‘Swelling and mechanical
properties of poly (vinyl alcohol) hydrogels’,
International journal of pharmaceutics 58(2), 135–
142.
Ghobashy, M. M. (2020), The application of natural polymer-
based hydrogels for agriculture, in ‘Hydrogels Based on
Natural Polymers’, Elsevier, pp. 329–356.
Guilherme, M. R., Aouada, F. A., Fajardo, A. R., Martins, A. F.,
Paulino, A. T., Davi, M. F., Rubira, A. F. & Muniz, E. C.
(2015), ‘Superabsorbent hydrogels based on
polysaccharides for application in agriculture as soil
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
51
conditioner and nutrient carrier: A review’, European
Polymer Journal 72, 365–385.
Ines, A. V., Honda, K., Gupta, A. D., Droogers, P. & Clemente,
R. S. (2006), ‘Combining remote sensing-simulation
modeling and genetic algorithm optimization to
explore water management options in irrigated
agriculture’, agricultural water management 83(3),
221– 232.
Ismail, H., Irani, M. & Ahmad, Z. (2013), ‘Starch-based
hydrogels: present status and applications’,
International Journal of Polymeric Materials and
Polymeric Biomaterials 62(7), 411–420.
Jacoby, R., Peukert, M., Succurro, A., Koprivova, A. & Kopriva,
S. (2017), ‘The role of soil microorganisms in plant
mineral nutrition—current knowledge and future
directions’, Frontiers in plant science 8, 1617.
Jamnongkan, T. & Kaewpirom, S. (2010), ‘Potassium release
kinetics and water retention of controlled-release
fertilizers based on chitosan hydrogels’, Journal of
Polymers and the Environment 18(3), 413–421.
Jha, A. K., Malla, R., Sharma, M., Panthi, J., Lakhankar, T.,
Krakauer, N. Y., Pradhanang, S. M., Dahal, P. &
Shrestha, M. L. (2016), ‘Impact of irrigation method on
water use efficiency and productivity of fodder crops
in nepal’, Climate 4(1), 4.
Kalhapure, A., Kumar, R., Singh, V. P. & Pandey, D. (2016),
‘Hydrogels: a boon for increasing agricultural
productivity in water-stressed environment’, Current
Science pp. 1773–1779.
Katayama, T., Nakauma, M., Todoriki, S., Phillips, G. O. &
Tada, M. (2006), ‘Radiation- induced polymerization of
gum arabic (acacia senegal) in aqueous solution’, Food
hydrocolloids 20(7), 983–989.
Kazanskii, K. & Dubrovskii, S. (1992), Chemistry and physics
of “agricultural” hydrogels in ‘Polyelectrolytes
hydrogels chromatographic materials’, Springer, pp.
97–133.
Kollar, J., Mrlik, M., Moravcikova, D., Kronekova, Z., Liptaj,
T., Lacik, I. & Mosnacek, J. (2016), ‘Tulips: a
renewable source of monomer for superabsorbent
hydrogels’, Macromolecules 49(11), 4047–4056.
Körner, A., Piculell, L., Iselau, F., Wittgren, B. & Larsson, A.
(2009), ‘Influence of different polymer types on the
overall release mechanism in hydrophilic matrix
tablets’, Molecules 14(8), 2699–2716.
Latif, I. A., Abdullah, H. M. & Saleem, M. H. (2016), ‘Electrical
and swelling study of different prepared hydrogel’, Am
J Polym Sci 6(2), 50–57.
Lelieveld, J., Hadjinicolaou, P., Kostopoulou, E., Chenoweth,
J., El Maayar, M., Giannakopoulos, C., Hannides, C.,
Lange, M., Tanarhte, M., Tyrlis, E. et al. (2012),
‘Climate change and impacts in the eastern
mediterranean and the middle east’, Climatic change
114(3-4), 667–687.
Mazen, A. M., Radwan, D. E. M. & Ahmed, A. F. (2015),
‘Growth responses of maize plants cultivated in sandy
soil amended by different superabsorbant hydrogels’,
Journal of Plant Nutrition 38(3), 325–337.
Meyvis, T., De Smedt, S., Demeester, J. & Hennink, W. (2000),
‘Influence of the degradation mechanism of hydrogels
on their elastic and swelling properties during
degradation’, Macromolecules 33(13), 4717–4725.
Montesano, F. F., Parente, A., Santamaria, P., Sannino, A. &
Serio, F. (2015), ‘Biodegradable superabsorbent
hydrogel increases water retention properties of
growing media and plant growth’, Agriculture and
Agricultural Science Procedia 4, 451–458.
Mosmann, T. (1983), ‘Rapid colorimetric assay for cellular
growth and survival: application to proliferation and
cytotoxicity assays’, Journal of immunological
methods 65(1-2), 55– 63.
Murphy, S. M., Skelly, P. J. & Tighe, B. J. (1992), ‘Synthetic
hydrogels. part 9—preparation and characterisation of
macroporous hydrophilic matrices’, Journal of
Materials Chemistry 2(10), 1007–1013.
Narjary, B., Aggarwal, P., Singh, A., Chakraborty, D. & Singh, R.
(2012), ‘Water availability in different soils in relation
to hydrogel application’, Geoderma 187, 94–101.
Neethu, T., Dubey, P. & Kaswala, A. (2018), ‘Prospects and
applications of hydrogel technology in agriculture’,
Int. J. Curr. Microbiol. App. Sci 7(5), 3155–3162.
Nie, H., Liu, M., Zhan, F. & Guo, M. (2004), ‘Factors on the
preparation of carboxymethylcellulose hydrogel and
its degradation behavior in soil’, Carbohydrate
Polymers 58(2), 185–189.
Omidian, H., Rocca, J. G. & Park, K. (2005), ‘Advances in
superporous hydrogels’, Journal of controlled release
102(1), 3–12.
Parthasarathi, T., Vanitha, K., Mohandass, S. & Vered, E.
(2018), ‘Evaluation of drip irrigation system for water
productivity and yield of rice’, Agronomy Journal
110(6), 2378–2389.
Paul, A., Laurila, T., Vuorinen, V. & Divinski, S. V. (2014),
Thermodynamics, diffusion and the Kirkendall effect
in solids, Springer.
Piao, S., Ciais, P., Huang, Y., Shen, Z., Peng, S., Li, J., Zhou,
L., Liu, H., Ma, Y., Ding, Y. et al. (2010), ‘The impacts
of climate change on water resources and agriculture in
china’, Nature 467(7311), 43–51.
Pritchard, R. H. & Terentjev, E. M. (2013), ‘Swelling and de-
swelling of gels under external elastic deformation’,
Polymer 54(26), 6954–6960.
Qureshi, M. A. & Khatoon, F. (2015), ‘Open environment
degradability study of cs/pvp/pnipam hydrogel film’,
Journal of Applicable Chemistry 4(3), 903–908.
Rehman, A., Ahmad, R. & Safdar, M. (2011), ‘Effect of
hydrogel on the performance of aerobic rice sown
under different techniques’, Plant, Soil and
Environment 57(7), 321– 325.
Rosenstock, T. S., Nowak, A. & Girvetz, E. (2018), The Climate-
Smart Agriculture Papers: Investigating the Business of
a Productive, Resilient and Low Emission Future,
Springer.
Roy, T., Kumar, S., Chand, L., Kadam, D., Bihari, B., Shrimali,
S., Bishnoi, R., Maurya, U., Singh, M., Muruganandam,
M. et al. (2019), ‘Impact of pusa hydrogel application
on yield and productivity of rainfed wheat in north west
himalayan region.’, Current Science (00113891).
Rudzinski, W. E., Dave, A. M., Vaishnav, U. H., Kumbar, S. G.,
Kulkarni, A. R. & Aminabhavi, T. (2002), ‘Hydrogels as
Prakash, S., Vasudevan, S., Banerjee, A., Joe, A.C., Geetha, K.N. and Mani, S.K. (2021) . Alınteri Journal of Agriculture
Sciences 36(2): 38-52
52
controlled release devices in agriculture’, Designed
monomers and polymers 5(1), 39–65.
Rychter, P., Rogacz, D., Lewicka, K., Kollár, J., Kawalec,
M. & Mosnácˇek, J.
(2019),
‘Ecotoxicological
properties of tulipalin a-based superabsorbents versus
conventional superabsorbent hydrogels’, Advances in
Polymer Technology.
Sannino, A., Madaghiele, M., Demitri, C., Scalera, F.,
Esposito, A., Esposito, V. & Maffezzoli, A. (2010),
‘Development and characterization of cellulose-based
hydrogels for use as dietary bulking agents’, Journal of
applied polymer science 115(3), 1438–1444.
Sarkar, S., Basu, B., Kundu, C. & Patra, P. (2012), ‘Deficit
irrigation: An option to mitigate arsenic load of rice
grain in west bengal, india’, Agriculture, ecosystems
& environment 146(1), 147–152.
Saruchi, B., Kumar, V. & Jindal, R. (2016), ‘Biodegradation
study of enzymatically catalyzed interpenetrating
polymer network: Evaluation of agrochemical release
and impact on soil fertility’, Biotechnology Reports 9,
74.
SAYED, H. E., Kirkwood, R. & Graham, N. (1991), ‘The effects
of a hydrogel polymer on the growth of certain
horticultural crops under saline conditions’, Journal of
Experimental Botany 42(7), 891–899.
Shimomura, T. & Namba, T. (1994), Preparation and
application of high-performance superabsorbent
polymers, ACS Publications.
Shin, J., Braun, P. V. & Lee, W. (2010), ‘Fast response photonic
crystal ph sensor based on templated photo-
polymerized hydrogel inverse opal’, Sensors and
Actuators B: Chemical 150(1), 183–190.
Smith, B. D. & Zeder, M. A. (2013), ‘The onset of the
anthropocene’, Anthropocene 4, 8–13.
Stahl, J. D., Cameron, M. D., Haselbach, J. & Aust, S. D.
(2000), ‘Biodegradation of superabsorbent polymers in
soil’, Environmental Science and Pollution Research
7(2), 83– 88.
Stuart, M. A. C., Huck, W. T., Genzer, J., Müller, M., Ober,
C., Stamm, M., Sukhorukov, G. B., Szleifer, I.,
Tsukruk, V. V., Urban, M. et al. (2010), ‘Emerging
applications of stimuli-responsive polymer materials’,
Nature materials 9(2), 101–113.
Suman, A., Verma, P., Yadav, A. N., Srinivasamurthy, R., Singh,
A. & Prasanna, R. (2016), ‘Development of hydrogel-
based bio-inoculant formulations and their impact on
plant biometric parameters of wheat (triticum
aestivum l.)’, Int J Curr Microbiol Appl Sci 5(3), 890–
901.
Tayel, M. & El-Hady, O. (1981), Super gel as a soil conditioner
1-its effect on some soil- water relations, in ‘III
International Symposium on Water supply and
Irrigation in the open and under Protected Cultivation
119’, pp. 247–256.
Tellis, J. C., Strulson, C. A., Myers, M. M. & Kneas, K. A. (2011),
‘Relative humidity sensors based on an environment-
sensitive fluorophore in hydrogel films’, Analytical
chemistry 83(3), 928–932.
Tokarev, I., Gopishetty, V., Zhou, J., Pita, M., Motornov, M.,
Katz, E. & Minko, S. (2009), ‘Stimuli-responsive
hydrogel membranes coupled with biocatalytic
processes’, ACS applied materials & interfaces 1(3),
532–536.
Wallace, A. (1986), ‘A polysaccharide (guar) as a soil
conditioner’, Soil science 141(5), 371 373.
Wilske, B., Bai, M., Lindenstruth, B., Bach, M., Rezaie, Z.,
Frede, H.-G. & Breuer, L. (2014), ‘Biodegradability of a
polyacrylate superabsorbent in agricultural soil’,
Environmental Science and Pollution Research 21(16),
9453–9460.
Woodhouse, J. & Johnson, M. (1991), ‘Effect of
superabsorbent polymers on survival and growth of
crop seedlings’, Agricultural water management
20(1), 63–70.
Xiao, X., Yu, L., Xie, F., Bao, X., Liu, H., Ji, Z. & Chen, L.
(2017), ‘One-step method to prepare starch-based
superabsorbent polymer for slow release of fertilizer’,
Chemical Engineering Journal 309, 607–616.
Zhang, Y., Liang, X., Yang, X., Liu, H. & Yao, J. (2014), ‘An
eco-friendly slow-release urea fertilizer based on
waste mulberry branches for potential agriculture and
horticulture applications’, ACS Sustainable Chemistry
& Engineering 2(7), 1871–1878.