No full-text available
To read the full-text of this research,
you can request a copy directly from the authors.
Genome-Wide Identification and Development of LTR Retrotransposon-Based Molecular Markers for the Melilotus Genus
... Notably, reports based on 47 L support these four species forming a monophyletic group. This finding is consistent with our results based on the complete chloroplast genome, although there may be differences in the specific interspecies relationships [50]. In contrast, in analyses based on EST-SSR markers and a small number of chloroplast genes, these four species clustered together with a few other species within the Melilotus genus [31]. ...
... In a phylogenetic tree based on LTRs, researchers also identified a monophyletic clade (clade II). This clade is composed of three species: M. indicus, M. italicus, and M. spicatus [50]. The clustering of these three species is also supported by analysis of EST-SSR markers, although the results indicate the inclusion of an additional species, M. segetalis [31]. ...
Background
Melilotus, a member of the Fabaceae family, is a pivotal forage crop that is extensively cultivated in livestock regions globally due to its notable productivity and ability to withstand abiotic stress. However, the genetic attributes of the chloroplast genome and the evolutionary connections among different Melilotus species remain unresolved.
Results
In this study, we compiled the chloroplast genomes of 18 Melilotus species and performed a comprehensive comparative analysis. Through the examination of protein-coding genes, we successfully established a robust phylogenetic tree for these species. This conclusion is further supported by the phylogeny derived from single-nucleotide polymorphisms (SNPs) across the entire chloroplast genome. Notably, our findings revealed that M. infestus, M. siculus, M. sulcatus, and M. speciosus formed a distinct subgroup within the phylogenetic tree. Additionally, the chloroplast genomes of these four species exhibit two shared inversions. Moreover, inverted repeats were observed to have reemerged in six species within the IRLC. The distribution patterns of single-nucleotide polymorphisms (SNPs) and insertions/deletions (InDels) within protein-coding genes indicated that ycf1 and ycf2 accumulated nonconservative alterations during evolutionary development. Furthermore, an examination of the evolutionary rate of protein-coding genes revealed that rps18, rps7, and rpl16 underwent positive selection specifically in Melilotus.
Conclusions
We present a comparative analysis of the complete chloroplast genomes of Melilotus species. This study represents the most thorough and detailed exploration of the evolution and variability within the genus Melilotus to date. Our study provides valuable chloroplast genomic information for improving phylogenetic reconstructions and making biogeographic inferences about Melilotus and other Papilionoideae species.
... The inter Primer Binding Site (iPBS) retrotransposons-based ampli cation technology was declared by Kalendar et al. (2010) as a universal DNA labeling method that can be used in plants and animals based on the primer binding site for the reverse transcription enzyme of LTR retrotransposon. The iPBS marker system has proven to be a powerful DNA ngerprinting technique that does not require sequence information and is the preferred universal marker system for the genetic differentiation of several eukaryotic organisms at both an intraspeci c and interspeci c level (Özer et al., 2016;Milovanov et al., 2019;Aydın et al., 2020;Pérez-Vargas et al., 2020;Erper et al., 2021;Ouyang et al., 2021). Molecular markers are one of the most important methods for characterization of genotypes and determining genetic resources (Badenes and Par tt, 1998;Li and Quiros, 2000). ...
In this study, walnut genotypes that selected during two growing seasons among thousands of seedlings were analyzed in terms of detailed morphometric, phenological, and chemical traits. A multivariate analysis was conducted with valuable traits for breeding and selection such as morphometric traits, chemical composition, and phenological characteristics. Also, genotypes were characterized by a retrotransposon-based iPBS marker system. The correlation analysis showed significant positive and negative correlations between agro-morphological characters. The principal component analysis explained 71.44% of the total variance into five main components. Principal component and hierarchical cluster analysis divided genotypes into three groups, whose subgroups were identified based on both agro-morphological characters and iPBS marker systems. A high level of polymorphism ratio was observed for tested markers. Mantel’s test demonstrated relatively low correlations between molecular and morphological treats ( r =0.04). The genetic similarities among all individuals ranged from 0.39 (between 018 and 015 or 045 genotypes) to 0.98 (between 090 and 094 genotypes) with a mean similarity of 0.67. Remarkable phenotypic and molecular variations were observed among the genotypes. The features of some investigated genotypes were above the acceptable thresholds for walnut selection in breeding programs and our study indicated that iPBS markers can be beneficial in walnut breeding programs, allowing the evaluation of the genetic relationship between genotypes, helping to differentiate and select the best genotypes to improve agronomic properties.
Bamboo, a non-timber grass species, known for exceptionally fast growth is a commercially viable crop. Long terminal repeat (LTR) retrotransposons, the main class I mobile genetic elements in plant genomes, are highly abundant (46%) in bamboo, contributing to genome diversity. They play significant roles in the regulation of gene expression, chromosome size and structure as well as in genome integrity. Due to their random insertion behavior, interspaces of retrotransposons can vary significantly among bamboo genotypes. Capitalizing this feature, inter-retrotransposon amplified polymorphism (IRAP) is a high-throughput marker system to study the genetic diversity of plant species. To date, there are no transposon based markers reported from the bamboo genome and particularly using IRAP markers on genetic diversity. Phyllostachys genus of Asian bamboo is the largest of the Bambusoideae subfamily, with great economic importance. We report structure-based analysis of bamboo genome for the LTR-retrotransposon superfamilies, Ty3-gypsy and Ty1-copia, which revealed a total of 98,850 retrotransposons with intact LTR sequences at both the ends. Grouped into 64,281 clusters/scaffold using CD-HIT-EST software, only 13 clusters of retroelements were found with more than 30 LTR sequences and with at least one copy having all intact protein domains such as gag and polyprotein. A total of 16 IRAP primers were synthesized, based on the high copy numbers of conserved LTR sequences. A study using these IRAP markers on genetic diversity and population structure of 58 Asian bamboo accessions belonging to the genus Phyllostachys revealed 3340 amplicons with an average of 98% polymorphism. The bamboo accessions were collected from nine different provinces of China, as well as from Italy and America. A three phased approach using hierarchical clustering, principal components and a model based population structure divided the bamboo accessions into four sub-populations, PhSP1, PhSP2, PhSP3 and PhSP4. All the three analyses produced significant sub-population wise consensus. Further, all the sub-populations revealed admixture of alleles. The analysis of molecular variance (AMOVA) among the sub-populations revealed high intra-population genetic variation (75%) than inter-population. The results suggest that Phyllostachys bamboos are not well evolutionarily diversified, although geographic speciation could have occurred at a limited level. This study highlights the usability of IRAP markers in determining the inter-species variability of Asian bamboos.
Melilotus is an important forage legume, with high values as feed and medicine, and widely used as green manure, honey plant, and wildlife habitat enhancer. The genetic diversity, structure and subdivision of this forage crop remain unclear, and plant genetic resources are the basis of biodiversity and ecosystem diversity and have attracted increasing attention. In this study, the whole collection of 573 accessions from the National Gene Bank of Forage Germplasm (NGBFG, China) and 48 accessions from the National Plant Germplasm System (NPGS, USA) in genus Melilotus were measured with respect to five seed characters: seed length, width, width-to-length ratio, circumference and 100-seed weight. Shannon’ genetic diversity index (H’) and phenotypic differentiation (Pst) were calculated to better describe the genetic diversity. The ITS and matK sequences were used to construct phylogenetic trees and study the genetic relationships within genus Melilotu. Based on seed morphology and molecular marker data, we preliminarily developed core collections and the sampling rates of M. albus and M. officinalis were determined to be 15% and 25%, respectively. The results obtained here provide preliminary sorting and supplemental information for the Melilotus collections in NGBFG, China, and establish a reference for further genetic breeding and other related projects.
Retrotransposons account for a large proportion of the genome and genomic variation, and play key roles in creating novel genes and diversifying the genome in many eukaryotic species. Although retrotransposons are abundant in plants, their roles had been underestimated because of a lack of research. Here, we characterized a gibberellin Acid (GA)-insensitive dwarf mutant, 84133, in foxtail millet. Map-based cloning revealed a 5.5-kb Copia-like retrotransposon insertion in DWARF1 (D1), which encodes a DELLA protein. Transcriptional analysis showed that the Copia retrotransposon mediated the transcriptional reprogramming of D1 leading to a novel N-terminal-deleted truncated DELLA transcript that was putatively driven by Copia's LTR, namely D1-TT, and another chimeric transcript. The presence of D1-TT was confirmed by protein immunodetection analysis. Furthermore, D1-TT protein was resistant to GA3 treatment compared with the intact DELLA protein due to its inability to interact with the GA receptor, SiGID1. Overexpression of D1-TT in foxtail millet resulted in dwarf plants, confirming that it determines the dwarfism of 84133. Thus, our study documents a rare instance of long terminal repeat (LTR) retrotransposon-mediated transcriptional reprograming in the plant kingdom. These results shed light on the function of LTR retrotransposons in generating new gene functions and genetic diversity.
Abstract
Wild emmer (Triticum turgidum ssp. dicoccoides) is the progenitor of cultivated wheat. Turkey is the main center of wheat
and plays a vital role in the spread of various crops among the continents. Karacadağ region is considered as the domestication
center of emmer wheat and still, hundreds of landraces are prevalent. A total of 29 wild emmer landraces, 4 cultivated emmer
wheat (Triticum turgidum ssp. dicoccum) and five durum wheat (T. turgidum ssp. durum) cultivars were investigated for the
genetic diversity and phylogenetic relationship using the iPBS-retrotransposons markers. Mean polymorphism and
polymorphic information contents (PIC) were 87.85% and 0.660, respectively. Mean effective numbers of alleles (1.961),
Shannon's Information Index (0.682) and gene diversity (0.489) reflected the occurrence of a great level of variations. T17 and
Chermik-1 genotypes were found much distinct and breeding valuable genotypes for wheat breeding. The unweighted pairgroup method with arithmetic means (UPGMA) divided all genotypes by their genetic makeup and geographical locations.
Among 3 species, UPGMA based clustering clearly separated the durum wheat from wild emmer and cultivated emmer
wheat. Results are clearly supported by the principal coordinate analysis (PCoA) and model-based structure algorithm.
Information provided herein comprehensively reflected the power of iPBS-retrotransposons for the diversity and phylogenetic
relationship investigation and reflected that this marker system can be effectively applied to investigate phylogenetic and
taxonomic relationship in any crop due to its universal nature. © 2018 Friends Science Publishers
Turkey presents a great diversity of common bean landraces in farmers’ fields. We collected 183 common bean accessions from 19 different Turkish geographic regions and 5 scarlet runner bean accessions to investigate their genetic diversity and population structure using phenotypic information (growth habit, and seed weight, flower color, bracteole shape and size, pod shape and leaf shape and color), geographic provenance and 12,557 silicoDArT markers. A total of 24.14% markers were found novel. For the entire population (188 accessions), the expected heterozygosity was 0.078 and overall gene diversity, Fst and Fis were 0.14, 0.55 and 1, respectively. Using marker information, model-based structure, principal coordinate analysis (PCoA) and unweighted pair-group method with arithmetic means (UPGMA) algorithms clustered the 188 accessions into two main populations A (predominant) and B, and 5 unclassified genotypes, representing 3 meaningful heterotic groups for breeding purposes. Phenotypic information clearly distinguished these populations; population A and B, respectively, were bigger (>40g/100 seeds) and smaller (<40g/100 seeds) seed-sized. The unclassified population was pure and only contained climbing genotypes with 100 seed weight 2–3 times greater than populations A and B. Clustering was mainly based on A: seed weight, B: growth habit, C: geographical provinces and D: flower color. Mean kinship was generally low, but population B was more diverse than population A. Overall, a useful level of gene and genotypic diversity was observed in this work and can be used by the scientific community in breeding efforts to develop superior common bean strains.
MicroRNAs (miRNAs) exhibit diverse and important roles in regulation of various biological processes at the post-transcriptional level in plants. In this study, Melilotus albus miRNA and their target genes were elucidated from five M. albus near-isogenic lines which differ in coumarin content to construct small RNA libraries through high-throughput sequencing. A total of 417 known miRNAs and 76 novel miRNAs were identified in M. albus. In addition, 4155 different target genes for 114 known miRNA families and 14 target genes for 2 novel miRNAs were identified in M. albus. Moreover, mtr-miR5248 and mtr-miR7701-5p target c35498_g3 and gma-miR396a-3p target c37211_g1 involved in coumarin biosynthesis were identified by using the differential expression of the miRNAs and their target genes correlation analysis. The abundance of miRNAs and potential target genes were validated by qRT-PCR analysis. We also found that there were both positive and negative expression changing patterns between miRNAs and their related target genes. Our first and preliminary study of miRNAs will contribute to our understanding of the functions and molecular regulatory mechanisms of miRNAs and their target genes, and provide information on regulating the complex coumarin pathway in M. albus for future research.
Melilotus is one of the most important legume forages, but the lack of molecular markers has limited the development and utilization of Melilotus germplasm resources. In the present study, 151 M clean reads were generated from various genotypes of Melilotus albus using Illumina sequencing. A total of 19,263 potential EST-SSRs were identified from 104,358 unigene sequences. Moreover, 18,182 primer pairs were successfully designed, and 550 primer pairs were selected using criteria of base repeat type, fragment length and annealing temperature. In addition, 550 primer pairs were screened by using PCR amplification products and used to assess polymorphisms in 15 M. albus accessions. A total of 114 primer pairs were detected as being highly polymorphic, and the average polymorphism information content (PIC) value was 0.79. Furthermore, those 114 polymorphic primer pairs were used to evaluate the transferability to 18 species of the genus Melilotus, and 70 EST-SSR markers were found to be transferable among the 18 Melilotus species. According to the UPGMA dendrogram and STRUCTURE analysis, the 18 Melilotus species were classified into three clusters. This study offers a valuable resource for the genetic diversity and molecular assisted breeding of germplasm resources in the genus Melilotus.
Background
Genome divergence by mobile elements activity and recombination is a continuous process that plays a key role in the evolution of species. Nevertheless, knowledge on retrotransposon-related variability among species belonging to the same genus is still limited. Considering the importance of the genus Helianthus, a model system for studying the ecological genetics of speciation and adaptation, we performed a comparative analysis of the repetitive genome fraction across ten species and one subspecies of sunflower, focusing on long terminal repeat retrotransposons at superfamily, lineage and sublineage levels. ResultsAfter determining the relative genome size of each species, genomic DNA was isolated and subjected to Illumina sequencing. Then, different assembling and clustering approaches allowed exploring the repetitive component of all genomes. On average, repetitive DNA in Helianthus species represented more than 75% of the genome, being composed mostly by long terminal repeat retrotransposons. Also, the prevalence of Gypsy over Copia superfamily was observed and, among lineages, Chromovirus was by far the most represented. Although nearly all the same sublineages are present in all species, we found considerable variability in the abundance of diverse retrotransposon lineages and sublineages, especially between annual and perennial species. Conclusions
This large variability should indicate that different events of amplification or loss related to these elements occurred following species separation and should have been involved in species differentiation. Our data allowed us inferring on the extent of interspecific repetitive DNA variation related to LTR-RE abundance, investigating the relationship between changes of LTR-RE abundance and the evolution of the genus, and determining the degree of coevolution of different LTR-RE lineages or sublineages between and within species. Moreover, the data suggested that LTR-RE abundance in a species was affected by the annual or perennial habit of that species.
Retrotransposons are the largest group of transposable elements (TEs) that are ubiquitous and well dispersed in plant genomes. Transposition/insertion of TEs on chromosomes often generates unique repeat junctions (RJs) between TEs and their flanking sequences. Long terminal repeats (LTR) are well conserved and abundant in plant genomes, making LTR retrotransposons valuable for development of TE junction-based markers. In this study, LTR retrotransposons and their RJs were detected from chokecherry genome sequences generated by Roche 454 sequencing. A total of 1246 LTR retrotransposons were identified, and 338 polymerase chain reaction primer pairs were designed. Of those, 336 were used to amplify DNA from chokecherry and other rosaceous species. An average of 283 of 336 (84.2 %) LTR primer pairs effectively amplified DNA from chokecherries. One hundred and seventeen chokecherry LTR primers also produced amplification in other Prunus (99) or rosaceous species (19). A total of 59 of 78 polymorphic LTR markers were qualified for linkage map construction according to the segregation distortion Chi-square (χ 2) test. Forty-eight LTR markers were successfully located on a previously constructed chokecherry map. The majority of the LTR markers were mapped on LG XI of the chokecherry map. Our results suggest that LTR marker development using random genome sequences is rapid and cost-efficient. Confirmed applicability of LTR markers in map construction and genetic mapping will facilitate genetic research in chokecherry and other rosaceous species.
Melilotus comprises 19 species, while the phylogenetic relationships between species remain unclear. In the present work, three chloroplast genes, rbcL, matK, trnL-F, and one nuclear region, ITS (internal transcribed spacer) belonging to 48 populations of 18 species of Melilotus were sequenced and phylogenetic trees were constructed to study their interspecific relationships. Based on the phylogenetic tree generated in this study using rbcL analysis, the Melilotus genus is clearly monophyletic in the legume family. Both Bayesian and maximum-parsimony approaches were used to analyze the data. The nrDNA ITS provided more informative characteristics (9.8%) than cpDNA (3.0%). Melilotus contains two closely related groups, clade I and clade II. M. spicatus, M. indicus and M. segetalis have a close relationship. M. infestus, M. siculus and M. sulcatus are closely related. The comparing between molecular phylogeny and flower color classification in Melilotus showed that the flower color is not much informative for phylogenetics of this genus.
Improved knowledge of genome composition, especially of its repetitive component, generates important information for both theoretical and applied research. The olive repetitive component is made up of two main classes of sequences: tandem repeats and retrotransposons (REs). In this study, we provide characterization of a sample of 254 unique full-length long terminal repeat (LTR) REs. In the sample, Ty1-Copia elements were more numerous than Ty3-Gypsy elements. Mapping a large set of Illumina whole-genome shotgun reads onto the identified retroelement set revealed that Gypsy elements are more redundant than Copia elements. The insertion time of intact retroelements was estimated based on sister LTR's divergence. Although some elements inserted relatively recently, the mean insertion age of the isolated retroelements is around 18 million yrs. Gypsy and Copia retroelements showed different waves of transposition, with Gypsy elements especially active between 10 and 25 million yrs ago and nearly inactive in the last 7 million yrs. The occurrence of numerous solo-LTRs related to isolated full-length retroelements was ascertained for two Gypsy elements and one Copia element. Overall, the results reported in this study show that RE activity (both retrotransposition and DNA loss) has impacted the olive genome structure in more ancient times than in other angiosperms.
© The Author 2014. Published by Oxford University Press on behalf of Kazusa DNA Research Institute.
Vetch (Vicia sativa L.) is one of the most important annual forage legumes in the World due to its multiple uses (i.e., hay, grain, silage and green manure) and high nutritional value. However, detrimental cyanoalanine toxins in its plant parts including seeds and its vulnerability to hard winter conditions are currently reducing the agronomic values of vetch varieties. Moreover, the existence in the public domain of very few genomic resources, especially molecular markers, has further hampered breeding efforts. Polymorphic simple sequence repeat markers from transcript sequences (cDNA; simple sequence repeat [SSR]) were developed for Vicia sativa subsp. sativa. We found 3,811 SSR loci from 31,504 individual sequence reads, and 300 primer pairs were designed and synthesized. In total, 65 primer pairs were found to be consistently scorable when 32 accessions were tested. The numbers of alleles ranged from 2 to 19, frequency of major alleles per locus were 0.27–0.87, the genotype number was 2–19, the overall polymorphism information content (PIC) values were 0.20–0.86, and the observed and expected heterozygosity values were 0.00–0.41 and 0.264–0.852, respectively. These markers provide a useful tool for assessing genetic diversity, population structure, and positional cloning, facilitating vetch breeding programs.
Retrotransposons are a major agent of genome evolution. Various molecular marker systems have been developed that exploit the ubiquitous nature of these genetic elements and their property of stable integration into dispersed chromosomal loci that are polymorphic within species. The key methods, SSAP, IRAP, REMAP, RBIP, and ISBP, all detect the sites at which the retrotransposon DNA, which is conserved between families of elements, is integrated into the genome. Marker systems exploiting these methods can be easily developed and inexpensively deployed in the absence of extensive genome sequence data. They offer access to the dynamic and polymorphic, nongenic portion of the genome and thereby complement methods, such as gene-derived SNPs, that target primarily the genic fraction.
Retrotransposons are both major generators of genetic diversity and tools for detecting the genomic changes associated with their activity because they create large and stable insertions in the genome. After the demonstration that retrotransposons are ubiquitous, active and abundant in plant genomes, various marker systems were developed to exploit polymorphisms in retrotransposon insertion patterns. These have found applications ranging from the mapping of genes responsible for particular traits and the management of backcrossing programs to analysis of population structure and diversity of wild species. This review provides an insight into the spectrum of retrotransposon-based marker systems developed for plant species and evaluates the contributions of retrotransposon markers to the analysis of population diversity in plants.
Molecular markers based on retrotransposon insertions are widely used for various applications including phylogenetic analysis. Multiple cases were described where retrotransposon-based markers, namely sequence-specific amplification polymorphism (SSAP), were superior to other marker types in resolving the phylogenetic relationships due to their higher variability and informativeness. However, the patterns of evolutionary relationships revealed by SSAP may be dependent on the underlying retrotransposon activity in different periods of time. Hence, the proper choice of retrotransposon family is essential for obtaining significant results. We compared the phylogenetic trees for a diverse set of diploid A-genome wheat species (Triticum boeoticum, T. urartu and T. monococcum) based on two unrelated retrotransposon families, BARE-1 and Jeli. BARE-1 belongs to Copia class and has a uniform distribution between common wheat (T. aestivum) genomes of different origin (A, B and D), indicating similar activity in the respective diploid genome donors. Gypsy-class family Jeli was found by us to be an A-genome retrotransposon with >70% copies residing in A genome of hexaploid common wheat, suggesting a burst of transposition in the history of A-genome progenitors. The results indicate that a higher Jeli transpositional activity was associated with T. urartu versus T. boeoticum speciation, while BARE-1 produced more polymorphic insertions during subsequent intraspecific diversification; as an outcome, each retrotransposon provides more informative markers at the corresponding level of phylogenetic relationships. We conclude that multiple retroelement families should be analyzed for an image of evolutionary relationships to be solid and comprehensive.
The genetic diversity of crop species is the result of natural selection on the wild progenitor and human intervention by ancient and modern farmers and breeders. The genomes of modern cultivars, old cultivated landraces, ecotypes and wild relatives reflect the effects of these forces and provide insights into germplasm structural diversity, the geographical dimension to species diversity and the process of domestication of wild organisms. This issue is also of great practical importance for crop improvement because wild germplasm represents a rich potential source of useful under-exploited alleles or allele combinations. The aim of the present study was to analyse a major Pisum germplasm collection to gain a broad understanding of the diversity and evolution of Pisum and provide a new rational framework for designing germplasm core collections of the genus.
3020 Pisum germplasm samples from the John Innes Pisum germplasm collection were genotyped for 45 retrotransposon based insertion polymorphism (RBIP) markers by the Tagged Array Marker (TAM) method. The data set was stored in a purpose-built Germinate relational database and analysed by both principal coordinate analysis and a nested application of the Structure program which yielded substantially similar but complementary views of the diversity of the genus Pisum. Structure revealed three Groups (1-3) corresponding approximately to landrace, cultivar and wild Pisum respectively, which were resolved by nested Structure analysis into 14 Sub-Groups, many of which correlate with taxonomic sub-divisions of Pisum, domestication related phenotypic traits and/or restricted geographical locations. Genetic distances calculated between these Sub-Groups are broadly supported by principal coordinate analysis and these, together with the trait and geographical data, were used to infer a detailed model for the domestication of Pisum.
These data provide a clear picture of the major distinct gene pools into which the genus Pisum is partitioned and their geographical distribution. The data strongly support the model of independent domestications for P. sativum ssp abyssinicum and P. sativum. The relationships between these two cultivated germplasms and the various sub-divisions of wild Pisum have been clarified and the most likely ancestral wild gene pools for domesticated P. sativum identified. Lastly, this study provides a framework for defining global Pisum germplasm which will be useful for designing core collections.
The goal of our Guidelines article (A unified classification system for eukaryotic transposable elements Nature Rev. Genet. 8, 973–982 (2007)
Long terminal repeat retrotransposons (LTR elements) are ubiquitous Eukaryotic TEs that transpose through RNA intermediates. Accounting for significant proportion of many plant genomes, LTR elements have been well established as one of the major forces underlying the evolution of plant genome size, structure and function. The accessibility of more than 40% of genomic sequences of the model legume Medicago truncatula (Mt) has made the comprehensive study of its LTR elements possible.
We use a newly developed tool LTR_FINDER to identify LTR retrotransposons in the Mt genome and detect 526 full-length elements as well as a great number of copies related to them. These elements constitute about 9.6% of currently available genomic sequences. They are classified into 85 families of which 64 are reported for the first time. The majority of the LTR retrotransposons belong to either Copia or Gypsy superfamily and the others are categorized as TRIMs or LARDs by their length. We find that the copy-number of Copia-like families is 3 times more than that of Gypsy-like ones but the latter contribute more to the genome. The analysis of PBS and protein-coding domain structure of the LTR families reveals that they tend to use only 4-5 types of tRNAs and many families have quite conservative ORFs besides known TE domains. For several important families, we describe in detail their abundance, conservation, insertion time and structure. We investigate the amplification-deletion pattern of the elements and find that the detectable full-length elements are relatively young and most of them were inserted within the last 0.52 MY. We also estimate that more than ten million bp of the Mt genomic sequences have been removed by the deletion of LTR elements and the removal of the full-length structures in Mt has been more rapid than in rice.
This report is the first comprehensive description and analysis of LTR retrotransposons in the Mt genome. Many important novel LTR families were discovered and their evolution is elucidated. Our results may outline the LTR retrotransposon landscape of the model legume.
No abstract available.
Retrotransposons are mobile genetic elements that transpose through reverse transcription of an RNA intermediate. Retrotransposons are ubiquitous in plants and play a major role in plant gene and genome evolution. In many cases, retrotransposons comprise over 50% of nuclear DNA content, a situation that can arise in just a few million years. Plant retrotransposons are structurally and functionally similar to the retrotransposons and retroviruses that are found in other eukaryotic organisms. However, there are important differences in the genomic organization of retrotransposons in plants compared to some other eukaryotes, including their often-high copy numbers, their extensively heterogeneous populations, and their chromosomal dispersion patterns. Recent studies are providing valuable insights into the mechanisms involved in regulating the expression and transposition of retrotransposons. This review describes the structure, genomic organization, expression, regulation, and evolution of retrotransposons, and discusses both their contributions to plant genome evolution and their use as genetic tools in plant biology.
The Win95 program for computation of distance matrixes and construction of phylogenetic or phenetic trees on the basis of RAPD, RFLP and allozyme data was presented. In contrast with other presently available software, the program FreeTree can also assess the robustness of the tree topology by bootstrap, jackknife or OTU-jackknife analysis. Moreover, the program can be used also for an analysis of data obtained in several independent experiments performed with nonidentical subsets of taxa. The function of the program was demonstrated by an analysis of RAPD data from 22 strains of Frenkelia. The program is available as an autoextractive archive containing the installation files of FreeTree and TreeView, manual in MS Word format and a sample of the input file at http://www.natur.cuni.cz/flegr/programs/+ ++freetree.
We examined the diversity, evolution, and genomic organization of retroelements in a wide range of gymnosperms. In total, 165 fragments of the reverse transcriptase (RT) gene domain were sequenced from PCR products using newly designed primers for gypsy-like retrotransposons and well-known primers for copia-like retrotransposons; representatives of long interspersed nuclear element (LINE) retroposons were also found. Gypsy and copia-like retroelements are a major component of the gymnosperm genome, and in situ hybridization showed that individual element families were widespread across the chromosomes, consistent with dispersion and amplification via an RNA intermediate. Most of the retroelement families were widely distributed among the gymnosperms, including species with wide taxonomic separation from the Northern and Southern Hemispheres. When the gymnosperm sequences were analyzed together with retroelements from other species, the monophyletic origin of plant copia, gypsy, and LINE groups was well supported, with an additional clade including badnaviral and other, probably virus-related, plant sequences as well as animal and fungal gypsy elements. Plant retroelements showed high diversity within the phylogenetic trees of both copia and gypsy RT domains, with, for example, retroelement sequences from Arabidopsis thaliana being present in many supported groupings. No primary branches divided major taxonomic clades such as angiosperms, monocotyledons, gymnosperms, or conifers or (based on smaller samples) ferns, Gnetales, or Sphenopsida (Equisetum), suggesting that much of the existing diversity was present early in plant evolution, or perhaps that horizontal transfer of sequences has occurred. Within the phylogenetic trees for both gypsy and copia, two clearly monophyletic gymnosperm/conifer clades were revealed, providing evidence against recent horizontal transfer. The results put the evolution of the large and relatively conserved genome structure of gymnosperms into the context of the diversity of other groups of plants.
Homoplasy has recently attracted the attention of population geneticists, as a consequence of the popularity of highly variable stepwise mutating markers such as microsatellites. Microsatellite alleles generally refer to DNA fragments of different size (electromorphs). Electromorphs are identical in state (i.e. have identical size), but are not necessarily identical by descent due to convergent mutation(s). Homoplasy occurring at microsatellites is thus referred to as size homoplasy. Using new analytical developments and computer simulations, we first evaluate the effect of the mutation rate, the mutation model, the effective population size and the time of divergence between populations on size homoplasy at the within and between population levels. We then review the few experimental studies that used various molecular techniques to detect size homoplasious events at some microsatellite loci. The relationship between this molecularly accessible size homoplasy size and the actual amount of size homoplasy is not trivial, the former being considerably influenced by the molecular structure of microsatellite core sequences. In a third section, we show that homoplasy at microsatellite electromorphs does not represent a significant problem for many types of population genetics analyses realized by molecular ecologists, the large amount of variability at microsatellite loci often compensating for their homoplasious evolution. The situations where size homoplasy may be more problematic involve high mutation rates and large population sizes together with strong allele size constraints.
Long terminal repeat (LTR) retrotransposons constitute a major fraction of the genomes of higher plants. For example, retrotransposons comprise more than 50% of the maize genome and more than 90% of the wheat genome. LTR retrotransposons are believed to have contributed significantly to the evolution of genome structure and function. The genome sequencing of selected experimental and agriculturally important species is providing an unprecedented opportunity to view the patterns of variation existing among the entire complement of retrotransposons in complete genomes.
Using a new data-mining program, LTR_STRUC, (LTR retrotransposon structure program), we have mined the GenBank rice (Oryza sativa) database as well as the more extensive (259 Mb) Monsanto rice dataset for LTR retrotransposons. Almost two-thirds (37) of the 59 families identified consist of copia-like elements, but gypsy-like elements outnumber copia-like elements by a ratio of approximately 2:1. At least 17% of the rice genome consists of LTR retrotransposons. In addition to the ubiquitous gypsy- and copia-like classes of LTR retrotransposons, the rice genome contains at least two novel families of unusually small, non-coding (non-autonomous) LTR retrotransposons.
Each of the major clades of rice LTR retrotransposons is more closely related to elements present in other species than to the other clades of rice elements, suggesting that horizontal transfer may have occurred over the evolutionary history of rice LTR retrotransposons. Like LTR retrotransposons in other species with relatively small genomes, many rice LTR retrotransposons are relatively young, indicating a high rate of turnover.
Population genomics has the potential to improve studies of evolutionary genetics, molecular ecology and conservation biology, by facilitating the identification of adaptive molecular variation and by improving the estimation of important parameters such as population size, migration rates and phylogenetic relationships. There has been much excitement in the recent literature about the identification of adaptive molecular variation using the population-genomic approach. However, the most useful contribution of the genomics model to population genetics will be improving inferences about population demography and evolutionary history.
The identification of genetically homogeneous groups of individuals is a long standing issue in population genetics. A recent Bayesian algorithm implemented in the software STRUCTURE allows the identification of such groups. However, the ability of this algorithm to detect the true number of clusters (K) in a sample of individuals when patterns of dispersal among populations are not homogeneous has not been tested. The goal of this study is to carry out such tests, using various dispersal scenarios from data generated with an individual-based model. We found that in most cases the estimated 'log probability of data' does not provide a correct estimation of the number of clusters, K. However, using an ad hoc statistic DeltaK based on the rate of change in the log probability of data between successive K values, we found that STRUCTURE accurately detects the uppermost hierarchical level of structure for the scenarios we tested. As might be expected, the results are sensitive to the type of genetic marker used (AFLP vs. microsatellite), the number of loci scored, the number of populations sampled, and the number of individuals typed in each sample.
Transposable elements (TEs) are capable of changing their genomic localization. Most class II elements (DNA transposons) transpose via physical excision and reintegration elsewhere in the genome (a cut and paste mechanism). They are widespread in plants, nevertheless, they usually do not attain high copy numbers as opposed to certain class I families. In Medicago truncatula, they are even less numerous as a group than in most other plant genomes and they were not systematically investigated. There are several reports on families of DNA transposons, including those belonging to PIF/Harbinger, Tc1/mariner, and Mutator superfamilies. Features characteristic for these families are presented in the present chapter. All of them can be related to groups of miniature inverted repeat transposable elements (MITEs) – non‐autonomous derivatives of the canonical elements, slightly more numerous and depending on the transposition machinery provided by their autonomous counterparts. Based on high levels of insertional polymorphisms in M. truncatula and high levels of uniformity of some MITE families, they likely have been active in the recent evolutionary period and might still be active. More research is needed to fully reveal the diversity of DNA transposons in M. truncatula.
Frequent somatic variations exist in pitaya (Hylocereus undatus) plants grown under abiotic stress conditions. Long terminal repeat (LTR) retrotransposons can be activated under stressful conditions and play key roles in plant genetic variation and evolution. However, whether LTR retrotransposons promotes pitaya somatic variations by regulating abiotic stress responses is still uncertain. In this study, transcriptionally active LTR retrotransposons were identified in pitaya after exposure to a number of stress factors, including in vitro culturing, osmotic changes, extreme temperatures and hormone treatments. In total, 26 LTR retrotransposon reverse transcriptase (RT) cDNA sequences were isolated and identified as belonging to 9 Ty1-copia and 4 Ty3-gypsy families. Several RT cDNA sequences had differing similarity levels with RTs from pitaya genomic DNA and other plant species, and were differentially expressed in pitaya under various stress conditions. LTR retrotransposons accounted for at least 13.07% of the pitaya genome. HuTy1P4 had a high copy number and low expression level in young stems of pitaya, and its expression level increased after exposure to hormones and abiotic stresses, including in vitro culturing, osmotic changes, cold and heat. HuTy1P4 may have been subjected to diverse transposon events in 13 pitaya plantlets successively subcultured for four cycles. Thus, the expression levels of these retrotransposons in pitaya were associated with stress responses and may be involved in the occurrence of the somaclonal variation in pitaya.
Molecular marker systems have been widely used for determination, discrimination and population structure analysis in the Sclerotiniaceae. The usefulness of a new marker system iPBS, based on the sequences of reverse transcriptase primer binding sites in long terminal repeats retrotransposons, was investigated with 34 isolates of six species confirmed by species-specific markers. Six of the iPBS primers were found to produce highly polymorphic (98%) and very distinct species-specific band patterns. Each primer amplified, on average, 33.5 polymorphic bands that was sufficient for species differentiation. The polymorphism information content was 0.896, indicating better discriminating power of markers, the Shannon's information index was 0.438, and the genetic distance was 0.707 as average values. UPGMA cluster analysis based on retrotransposons divided all the isolates into three cluster and six sub-clusters in accordance with their species. Principal co-ordinate analysis also strongly confirmed this cluster pattern. The iPBS marker system was therefore a useful tool for evaluation of genetic variation at intra- and inter-species, and at the population levels for members of the Sclerotiniaceae. Furthermore, the iPBS markers could provide easy discrimination of Botrytis cinerea from Botrytis pseudocinerea.
Methods for the diagnostics and detection of plant pathogens need to be quick, simple, reliable, and cost effective. In the present study, inter-priming binding sites (iPBS)-retrotransposons were used to study the genetic diversity of 96 isolates belonging to 16 different fungal species at intra- and inter-species levels. The 6 iPBS-retrotransposon primers amplified 389 bands, of which 387 were polymorphic (99%) with an average of 64.83 polymorphic fragments per primer. Polymorphism information contents per primers ranged from 0.976 to 0.870 with the average being 0.972. Neighbor-joining analysis differentiated all fungal isolates according to their species, and at the intra-specific level revealed considerable genetic variability among fungal isolates. The data supports the use of iPBS-retrotransposons as ‘a universal marker’ for the molecular characterization of different fungal species. It also suggests that only one or a few iPBS-retrotransposon primers would be sufficient for the discrimination of fungal isolates at both intra- and inter-species levels.
RAPD (random amplified polymorphic DNA) markers were generated from filaments of 15 Porphyra lines representing four important groups, P. yezoensis, P. haitanensis, P. katadai var. hemiphylla and P. oligospermatangia. Among the total 69 fragments generated by 6 selected primers (among 50 primers), 67 appeared to be polymorphic (97.1%). Cluster analysis based on the RAPD results was performed. The 15 Porphyra lines were divided into 3 groups. This result was consistent with that from taxonomy analysis. A DNA fingerprinting based on 8 bands amplified with OPN-02 and OPJ-18 was constructed and might be used in Porphyra variety identification. Five specific RAPD fragments of 5 Porphyra lines were isolated and cloned into pGEM-T easy vector. These five RAPD fragments may be useful in germplasm identification and property protection of Porphyra.
Plant biotechnology has great potential for improving target traits in crops. This can be achieved by the production of transgenic crops and marker-assisted breeding. Marker-assisted breeding has gained momentum in recent times since it does not need biosafety regulations. Several kind of molecular markers are available for use in crop breeding, such as restriction fragment length polymorphism, microsatellites, sequence characterized amplified region, sequence-tagged site, inter-simple sequence repeat amplification, amplified fragment length polymorphism and single nucleotide polymorphism. Sequence-related amplified polymorphism is a novel molecular marker system which is based on open reading frames (ORFs) developed from genome sequence data of Arabidopsis. It provides a unique combination of forward and reverse primers which can be selected arbitrarily giving a large number of primer combinations. Since this is an ORF-based marker system, it targets functional genes and has potential for their application in crop breeding. This marker system was first used and demonstrated by Li and Quiros in Brassica oleracea in 2001, and since then there have been several reports in different plant species ranging from field crops to tree species for assessing genetic diversity, mapping and tagging of genes, hybrid identification and sex determination. This review provides an overview of SRAP markers and their applications in crop improvement.
Synopsis
Synopsis
Madrid sweetclover excelled in dry matter and nitrogen production in the fall of the seeding year. Southern, nonhardy alfalfas were superior to the hardy strain, Ranger. Higher yields were obtained from medium red clover than from. Ladino white clover, but both were inferior to other legumes. Madrid sweetclover grown alone outyielded the various legume associations. Madrid was the major component of all associations in which it was included. Red clover and Ladino white clover lacked strong competitive ability under these conditions.
Please view the pdf by using the Full Text (PDF) link under 'View' to the left. Copyright © . .
We describe specific primers that amplify nine microsatellite DNA loci from Melilotus alba and Melilotus officinalis, both invasive plant species (Fabaceae) throughout North America. Allelic diversity was slightly lower for M. alba than for M. officinalis, as was expected heterozygosity. For both species, heterozygote deficit was observed at several loci. Genotypic diversity was very high for both species; the 29 plant samples of each species all had different multilocus genotypes. These markers will be used to determine the origins of the sweetclover invasion in Alaska and to compare patterns of diversity between subarctic and lower latitude populations.
Retroviral replication is a very error-prone process. Replication of retroviruses gives rise to populations of closely related but different genomes referred to as 'quasispecies'. This huge swarm of different sequences constitutes a reservoir of potentially useful genomes in case of an environmental change, endowing retroviruses with extreme adaptability. Retrotransposons are mobile genetic elements closely related to retroviruses, and retrotransposition is as error prone as retroviral replication. The Tnt1 retrotransposon is present in hundreds of copies in the genome of tobacco that show a high level of sequence heterogeneity. When Tnt1 is expressed, its RNA is not a single sequence but a population of sequences displaying a quasispecies-like structure. This population structure gives to Tnt1, as in the case of retroviruses, a high sequence plasticity and an adaptive capacity. We propose this adaptivity as the major reason for Tnt1 maintenance in Nicotiana genomes and we discuss in this paper the importance of sequence variability for Tnt1 evolution.
Previously unexploited legume species may offer utilization potential where environmental stresses constrain the use of more conventional forage crops. Melilotus indicus (L.) All., Yellow sweet clover, occurs as a weed in different habitats in Egypt. It grows in moderately saline areas, where traditional forage legumes cannot be cultivated. Our extensive field studies have recorded the species in many different habitats ranging from healthy agricultural lands to abandoned saline areas. The studied plants maintained high nodulation capacity (68 – 95%) and nitrogenase activities (about 1.81 μmol C2H4 plant−1 h−1) in different habitats. Greenhouse experiments demonstrated that seed germination was maintained at 80% when growing on substrats containing 200 mM NaCl and that 25% of the germination capability was preserved when 300 mM NaCl was added to the growth medium. The growth rate of seedlings was not significantly affected by 200 mM NaCl but was reduced by 30% under 300 mM NaCl. It is supposed that M. indicus uses a salt inclusion mechanism for maintaining growth under saline conditions, as it accumulated high amounts of Na+ and Cl− ions. Leaf succulence and indices of leaf water status did not differ among the salt treatments, whereas relative water content was reduced by only 3% and water content at saturation increased by about 14% at high salt concentrations in the growing medium. Our results suggest recommending the cultivation of M. indicus in salt-affected soils, which are widespread and pose a problem for the farmers of Egypt and other countries in the world's arid belt.
We present here a new version of the Arlequin program available under three different forms: a Windows graphical version (Winarl35), a console version of Arlequin (arlecore), and a specific console version to compute summary statistics (arlsumstat). The command-line versions run under both Linux and Windows. The main innovations of the new version include enhanced outputs in XML format, the possibility to embed graphics displaying computation results directly into output files, and the implementation of a new method to detect loci under selection from genome scans. Command-line versions are designed to handle large series of files, and arlsumstat can be used to generate summary statistics from simulated data sets within an Approximate Bayesian Computation framework.
Dominant markers such as amplified fragment length polymorphisms (AFLPs) provide an economical way of surveying variation at many loci. However, the uncertainty about the underlying genotypes presents a problem for statistical analysis. Similarly, the presence of null alleles and the limitations of genotype calling in polyploids mean that many conventional analysis methods are invalid for many organisms. Here we present a simple approach for accounting for genotypic ambiguity in studies of population structure and apply it to AFLP data from whitefish. The approach is implemented in the program structure version 2.2, which is available from http://pritch.bsd.uchicago.edu/structure.html.
Identifying loci under natural selection from genomic surveys is of great interest in different research areas. Commonly used methods to separate neutral effects from adaptive effects are based on locus-specific population differentiation coefficients to identify outliers. Here we extend such an approach to estimate directly the probability that each locus is subject to selection using a Bayesian method. We also extend it to allow the use of dominant markers like AFLPs. It has been shown that this model is robust to complex demographic scenarios for neutral genetic differentiation. Here we show that the inclusion of isolated populations that underwent a strong bottleneck can lead to a high rate of false positives. Nevertheless, we demonstrate that it is possible to avoid them by carefully choosing the populations that should be included in the analysis. We analyze two previously published data sets: a human data set of codominant markers and a Littorina saxatilis data set of dominant markers. We also perform a detailed sensitivity study to compare the power of the method using amplified fragment length polymorphism (AFLP), SNP, and microsatellite markers. The method has been implemented in a new software available at our website (http://www-leca.ujf-grenoble.fr/logiciels.htm).
Polymerase chain reaction (PCR)-based nuclear DNA markers were developed for fern species. We first determined the partial nucleotide sequence of cDNA of the pgiC gene encoding cytosolic phosphoglucose isomerase from Dryopteris caudipinna, and then PCR primers for exon-primed, intron-crossing (EPIC) amplifications were designed. The EPIC primers are universally applicable to the most derived indusiate fern families such as Dryopteridaceae, Thelypteridaceae, and Woodsiaceae. The PCR products of primers 14F/16R containing two introns are moderate in size (534 bp-ca.1000 bp) and are possibly of value in phylogenetic reconstruction at specific and generic levels. Codominant nuclear DNA markers applicable to the estimation of mating systems and other population genetic studies were also developed by a combination of single-strand conformation polymorphism (SSCP) and EPIC amplification using primers 14F/15R and 15F/16R. In order to provide a case study using these markers, allelic variation of PCR products using 15F/16R was examined in populations of Arachniodes standishii (Dryopteridaceae).
Eukaryotic genomes are full of long terminal repeat (LTR) retrotransposons. Although most LTR retrotransposons have common structural features and encode similar genes, there is nonetheless considerable diversity in their genomic organization, reflecting the different strategies they use to proliferate within the genomes of their hosts.
Construction and application of identification and analysis process of full-length LTR-retrotransposons (D)
- J Wu
Wu, J. Construction and application of identification and analysis process of full-length LTR-retrotransposons (D). Anhui Agric.
Univ. 2017, 56.
Talking about the Comprehensive Utilization of Plants
- L Ma
Ma, L. Talking about the Comprehensive Utilization of Plants. Xinjiang Anim. Husb. 2005, 56-57. [CrossRef]