Available via license: CC BY 4.0
Content may be subject to copyright.
Corrigendum
Corrigendum to “Hot deformation and dynamic α-globularization of a
Ti-17 alloy: Consistent physical model”[Materials and Design 197
(2021) 109266]
Ricardo Henrique Buzolin
a,b,
⁎,Michael Lasnik
c
, Alfred Krumphals
c
, Maria Cecilia Poletti
a,b
a
Christian Doppler Laboratory for Design of High-Performance Alloys by Thermomechanical Processing, Kopernikusgasse 24, 8010 Graz, Austria
b
Institute of Materials Science, Joining and Forming at GrazUniversity of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria
c
voestalpine BÖHLER Aerospace GmbH & Co KG,Mariazellerstraße 25, 8605 Kapfenberg, Austria
The authors regret to inform that Eq. (28) should be like follows:
Gs¼2
SvfHAGB
ð28Þ
And the caption of Figure 5 should be as follows:
Fig. 5 Inverse pole figures (IPF) maps of the EBSD measurements for
Ti-17 deformed at: a) 810 °C at 0.001 s
−1
;b)810°Cat1s
−1
; c) 850 °C at
0.001 s
−1
and d) 850 °C at 1 s
−1
. The black regions are the α-phase, and
the matrix is β-phase. TD and ND correspond to the transversal and
compression direction, respectively.
Author would like to apologize for the inconvenience caused.
Materials and Design 203 (2021) 109627
DOI of original article: https://doi.org/10.1016/j.matdes.2020.109266.
⁎Corresponding author at: Christian Doppler Laboratory for Design of High-Performance
Alloys by Thermomechanical Processing, Kopernikusgasse 24, 8010 Graz, Austria.
E-mail address: ricardo.buzolin@tugraz.at (R.H. Buzolin).
https://doi.org/10.1016/j.matdes.2021.109627
0264-1275/© 2021 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
Contents lists available at ScienceDirect
Materials and Design
journal homepage: www.elsevier.com/locate/matdes