Content uploaded by Satish Patel
Author content
All content in this area was uploaded by Satish Patel on Sep 30, 2020
Content may be subject to copyright.
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 4 Issue 6, September-October 2020 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD33493 | Volume – 4 | Issue – 6 | September-October 2020 Page 873
Human Resource Management in MSME in Saurashtra Region
Tushar D. Borad, Dr. Satish Patel
Centre for Studies in Rural Management, Faculty of Management and Technology,
Gujarat Vidyapith, Randheja, Gandhinagar, Gujarat, India
ABSTRACT
In human resource management, there is a need to focus on employee
training, skills development, recruitment process as well as reduction of
employee turnover as well as a change in mental attitude towards human
resources. Thus, enhancing modern and systematic management in the
management of the industry.
KEYWORDS: HRM, MSME, SWOT, Saurashtra, Management
How to cite this paper: Tushar D. Borad |
Dr. Satish Patel "Human Resource
Management in MSME in Saurashtra
Region" Published in
International Journal
of Trend in Scientific
Research and
Development (ijtsrd),
ISSN: 2456-6470,
Volume-4 | Issue-6,
October 2020,
pp.873-876, URL:
www.ijtsrd.com/papers/ijtsrd33493.pdf
Copyright © 2020 by author(s) and
International Journal of Trend in Scientific
Research and Development Journal. This
is an Open Access article distributed
under the terms of
the Creative
Commons Attribution
License (CC BY 4.0)
(http://creativecommons.org/licenses/by/4.0)
1. INTRODUCTION
The inevitability of small-scale enterprises to strengthen the
country's economy and bring about economic equality
cannot be denied. These industries are playing an important
role in job creation, GDP and exports. But these industries
are facing some challenges as well as some weaknesses. In
particular the lack of implementation of scientific
management. The unit consists of separate management, but
here human resource management is at the centre. Human
resource is the heart of the unit. Proper management and
development of the human resources working in the
organization is essential for the development of the
organization. This includes everything from employee
selection to development and sustainability. Here, let us
examine the state of human resource management
prevailing in this industry.
About MSME
According to the Micro, Small and Medium Enterprises Development Act-2006 in India, MSMEs are mainly divided into two
sections.
Classification based on the investment in the unit Classification based on the number of
employees working in the unit
Industry class
Investment in a
manufacturing unit
Investment of equipment
in the service sector Industry class Number of
employees
Micro More than 25 lakh More than 10 lakh Micro 02 to 09
Small 25 lakh to 5 crores 10 lakh to 2 crores Small 10 to 49
Medium 5 crores to 10 crores 2 crores to 5 crores Medium 50 to 249
Industries in Saurashtra Region
Different industries are found in the area according to the
geographical situation. Which are as follows:
Paper Industry: Units are located in Rajkot. As well as
most of the units of paper industry in Gujarat are of
MSME size.
Cement Industry: Sikka, Drarka, Amreli, Jafrabad while
Porbandar has white cement units.
Sugar Industry: Units are located in Amreli, Gir-
Somnath, Gadha, Rajkot, Junagadh.
Diamond Industry: Located in Amreli, Bhavnagar,
Gariadhar and SavarKundla
Ceramic industry: Located in Morbi, Dhrangadhra,
Shihor, Rajkot, Bhavnagar. Here, a total of 730 units are
located in Gujarat. 90 percent of them are small
businesses. The industry is in need of trained artisans
and technical assistance.
Shipbreaking: 70 to 80 ships a year are wrecked at Alang
near Bhavnagar. Here, the problem of accident of the
artisans prevails. Apart from this, the industry is also
located near Jamnagar.
IJTSRD33493
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD33493 | Volume – 4 | Issue – 6 | September-October 2020 Page 874
Oxygen production: Units are located between
Bhavnagar and Alang and near Limbdi.
Petrochemical Industry: Jamnagar where Reliance and
Essar units are located
Clock industry: 85% of all wall clocks made in India are
produced in this area. In which women workers are
found special. In addition, there are 100 watchcase
manufacturing units in Rajkot. Thus, there is still room
for growth in the industry.
Industries in various places in Saurashtra: There are
scattered decentralized industrial units all over
Saurashtra.
2. PROBLEM STATEMENT
In today's competitive world, competition is increasing day
by day in the industrial world. In which skill full
management is essential for business to grow and survive.
Large companies meet it on the strength of money and
resources, But MSME-sized industries are declining due to
limited resources. As a result, they sometimes lose their very
existence Therefore, subject selection has been done keeping
in view the MSME size units to get proper direction in
management and to nurture its development. The main focus
of the study is the Saurashtra region of Gujarat. Here, most of
the farmland is rained. Eight months of the year people get
employment from non-agricultural sector. He has to move to
cities like Surat and Ahmedabad. There is no shortage of
beaches, ports and other natural resources in the area and
small and big industries are also operating in the area. Small
businesses here can be made more efficient through efficient
management. Through which balanced growth as well as
local employment can be generated.
3. RESEARCH METHODOLOGY:
Field Selection:
Saurashtra area of Gujarat has been selected to check the
status of production management in MSME.
Aggregate and sample selection:
The study area covers a total of 7 districts. (As per the year
2010-11) 5% of the total MSME units operating in these seven
districts as per the 2011 census have been selected as
sample. These units have been selected keeping in view the
total units operating in the district. As well as a total of 165
units of micro, small and medium scale have been selected
symmetrically. Thus, out of 165 selected units, a total of 385
respondents have been selected through visual
demonstration method. It is important to note here that the
selected units have a symmetrical selection of micro, small
and medium scale units. But there is a difference in the
number of respondents according to the size of the unit. In
which 1 respondent is selected from the micro, 2 from the
small and 4 from the medium unit.In this way the researcher
collected data by visiting a total of 385 respondents out of
165 units. The number of units varies from district to district.
But symmetrical selection of micro, small and medium scale
units is done according to the size of the units.
Method of Data collection
• Primary Data collection:
- Questionnaire schedule, Interview and Observation
• Secondary data collection:
The main sources of this information collection are the use of
modern methods such as internet and e-mail in addition to
research books, pamphlets, periodicals, reports from
government or non-government accounts available in the
library.
4. FINDINGS
Human resource management has a prominent place in
management, which involves working with and managing. As
such, it includes matters such as recruitment, training-
development, maintenance and evaluation. In which the
focus is on developing the capacity of the employee and
making maximum use of it for the organization. Here,
analyse the feedback received from administrators regarding
the practice of human resource management in sample units.
Opinions have been obtained from the administrators as per
the ‘Likert scale’ through the questionnaire schedule
focusing on five options. These include fully agree, agree,
neutral, disagree, fully disagree completely.
A. General Observation
Let's analyse based on the available information. Opinions
were obtained focusing on a total of 16 criteria related to
human resource management, as follows.
Outline of assignment of work to the employee:
78.79% of the managers have agreed. Thus, there is an
outline about the assignment of the employee.
Formalities in employee selection:
79.39% of managers have agreed. Thus, there is
formality in employee selection.
Employee Training:
70.30% of the managers have agreed. Thus, the
employee is trained.
Employee Performance Evaluation:
66.67% of managers have agreed. Thus, employee
performance evaluation comes into play.
Staff appointment keeping in view the nature of
work:
56.37% of the managers have agreed. Thus, the
proportion of units that are recruited keeping in view
the nature of work is low.
Productivity Measurement:
56.97% of the managers agreed. Thus, the proportion of
units on which productivity is measured is reported to
be low.
Measure of efficiency:
57.76% of the managers have agreed. Thus, the
proportion of units where efficiency is measured is
reported to be low.
Appropriate adjustment in the workplace:
57.58% of managers have agreed. Thus, the proportion
of units with proper arrangement in the workplace is
reported to be low.
Know about Kai Zen:
51.51% of the moderators agreed. Thus, the proportion
of administrators with knowledge of Kai Zen is low.
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD33493 | Volume – 4 | Issue – 6 | September-October 2020 Page 875
Continuous improvement in the work process:
53.93% of the managers have agreed. Thus, the
proportion of units that are constantly undergoing
positive improvements in the work process is low.
Innovation in management:
53.34% of the administrators have agreed. Thus, the
proportion of units being renewed in the system is low.
Promoting positive improvement in the workplace:
56.97% of managers agreed. Thus, positive improvement
in the workplace is encouraged
Proper Production Method:
69.70% of the managers have agreed. Thus, the
appropriate production method is adopted.
Proper Production Method:
69.70% of the managers have agreed. Thus, the
appropriate production method is adopted.
Employee Recruitment Method:
37.60% are recruited directly, 20% by agency, 23.60% by
reference and 18.80% by other means. Thus, all three
categories of industry unit have the highest direct
recruitment.
Employee Incentive Method:
Incentive is given by 23.60% financial, 13.90%
honorarium, 17% promotion and 45.50% salary increase.
Thus, all three categories of industry unit are most
encouraged by salary increases.
Types of employees working in the unit:
12.10% one, 25.50% two, 29.10% three and 33.30% four
or more types of employees are employed. Thus, all
three categories of industry units have the highest
number of four or more types of employees.
Analysis of the overall score
Opinions have been taken from the administrators focusing
on a total of 13 criteria in the sample units. These opinions
have been analysed in different dimensions, including age
group, educational qualifications, industry class as well as
institutional type, Kruskal Wallis test, and race as well as
man whit test in industry activity. In addition, each criterion
has been analysed comparatively with the industry. Here, the
overall score of human resource management is analysed as
a whole.
Table: Total score of human resource management
Total score of human resource management
N Range
Minimum
Maximum
Mean Std. Deviation
165
35 25 60 49.636
6.32368
As shown in the table above, these units have a mean of human resource management 49.63 and standard deviation (SD) 6.32.
Thus, overall the human resource management situation in these units is good.
In addition, its mean, standard deviation (SD) and variability (C.V.) have been analyzed keeping in view the 13 criteria of human
resource management.
Table: Total score of Human resource management criteria
Description N Mean
S.D C.V.
1 Outline for assigning work to an employee 165
4.1 1.037
25.293
2 Formal in employee selection 165
4.18 0.939
22.464
3 Employee training 165
3.94 1.016
25.787
4 Employee performance evaluation 165
3.92 0.943
24.056
5 Employee appointment 165
3.76 0.936
24.894
6 Measuring employee productivity 165
3.72 0.973
26.156
7 Measurement of employee efficiency 165
3.75 1.067
28.453
8 Proper adjustment in the workplace 165
3.78 0.994
26.296
9 Information about Kai Zen 165
3.53 1.276
36.147
10
Positive improvements in functioning 165
3.58 1.205
33.659
11
Innovation in management 165
3.62 1.192
32.928
12
Promote positive improvement in the workplace
165
3.7 1.144
30.919
13
Proper production method 165
4.05 1.035
25.556
C.V. (Coefficient of Variation) = (SD / Mean)*100
In the criteria shown in the table above, the median value of “Formal in Employee Selection” is 4.18, followed by “Outline for
Assigning Work to Employee” 4.1 and “Proper Production Method” 4.05. Here, the median value of "Kai Zen Knowledge" is 3.53,
which is the lowest.In addition, in terms of variability (C.V.), "Kai Zen Knowledge" has the highest variability (36.14), followed
by "Positive Improvement in Work Process" (3.65). Which shows more deviation and less consistency in response. While there
is a high consistency in the response to “formal in employee selection” and “employee performance appraisal”, the variables
(C.V.) are 22.46 and 24.05, respectively, which is the lowest.
5. SUGGESTIONS
In addition to statistical analysis and interpretation, some
suggestions have been made focusing on face-to-face
interviews and observations. Which is as follows.
After the appointment of the employee, the work should
be assigned in stages by making a definite outline so that
he can adapt to the new environment and daily work.
Formal selection should be done keeping in view the
work related study, experience, efficiency measurement
as well as aptitude in the selection of candidate so that
‘the right place is the right person’.
Personal training should be organized at different levels
from time to time to increase the understanding and
implementation of technical, managerial and other new
concepts.
International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD33493 | Volume – 4 | Issue – 6 | September-October 2020 Page 876
Performance appraisal should be done to create safety
as well as competitive environment in the employee and
for promotion as well as salary increase.
The productivity of the employee should be measured
for the analysis of the expenditure incurred on the
employee and the revenue generated by it and for
manpower planning.
Workplace design and production method should be
adopted keeping in view the human body and
ergonomics so that energy and time of manpower is not
wasted.
Considering the nature of the business as well as the size
of the unit, the work process should be continuously
improved by implementing new concepts and
technologies coming in the market.
Continuous innovation in management is essential for
the development of the unit. It should be increased in
these units.
Promoting positive improvement in the workplace
enables employees to innovate new ideas. Here, this
type of incentive should be increased.
Most of the recruitment process in the units is done
directly, here, this process can be done by ‘outsourcing’
(through the agency) to get more candidates selected
and also to ease the workload.
Most of the time ‘salary increase’ is given to the
employee, but since man is a social animal, other
incentives should also be given keeping in view the time
and place.
The more employees there are in a unit, the more
‘specialization’ there is. These units have the highest
proportion of four or more employees. Thus, even here,
‘specialization’ should be increased.
6. SWOT ANALYSIS:
(SWOT: Strengthen, Weaknesses, Opportunities, Threads)
SWOT analysis has been done on the basis of research
statistics, observations as well as information obtained
through interviews. Which is as follows.
S: Strengthen
• Procurement of human resources at the local level.
• Commitment, loyalty as well as self-worth in working
human resource.
• Change Acceptability: Since no bureaucracy is bound by
inertia here, acceptance can be done quickly so it is easy
to react in the market.
• Innovation and creativity thrive in this industry more
than big companies immersed in Bureaucracy. Here, the
small size of the unit allows for quick judgment and
experimentation.
W: Weaknesses
• Lack of training and development.
• Less implementation of employee incentive policy
• Lack of clarity regarding employee role, responsibility
and result.
• Lack of skilled workers: There is a shortage of skilled
workers in these industries. Resulting in; Lack of project
identification, consulting services, training and skill
building etc.
O: Opportunities
The Central and State Governments provide many
opportunities for the development of MSMEs through
policies and schemes.
A. Prime Minister's Employment Generation Program and
Other Credit Support Scheme
B. Entrepreneurship and Skill Development Program
C. National SC-ST Hub
D. Scheme of Information, Education and Communication
T: Threads
• To sustain a skilled employee after training and
development
• Changing human resource management policies from
time to time
• Keeping production costs low in labour-intensive
industry
7. CONCLUSION
From the whole study it can be said that modern and
systematic management needs to be enhanced in the
management of this industry. Here, no specific formalities
are followed in human resource management and the
practice is becoming more traditional. Which should be
improved and the concept of human resource should be
changed from time to time. As well as human resource
management, there is a need to focus on staff training, skills
development, recruitment process, reduction of employee
turnover as well as a change in mental attitude towards
human resources. However, some of the modern concepts
are implemented in these units knowingly or unknowingly
and the operational aspect is followed and the work is done
according to the department which can be considered a
progressive matter.
REFERENCE
[1] Annual Report (2017-18. Ministry of MSME, GoI.
[2] Borad, T. D. and Patel, S. P (January-2019),“A STUDY
OF ‘KAIZEN’ PRACTICE IN MSME”. Journal of
Emerging Technologies and Innovative Research, 6,
517-524.
[3] Dr. Arunkumar Panda. (November-2017).
“Empowerment of Indian's MSME”. Yojana, 5-8.
[4] Gade, D. S. (2018). “MSMEs’ Role in Economic Growth
– a Study on India’s Perspective”. International
Journal of Pure and Applied Mathematics, 18.
[5] Borad, T. D and Patel, S. P (February-2018).
“ભારતનાMSME મા◌ા◌ંમાનવસાંસાધનસાંચાલનનીથતી”
(Situation of human resource management in MSME
of India) Knowledge consortium of Gujarat.
[6] Borad, T. D. and Patel, S. P (January-2020), “Micro,
Small and Medium (MSME) in Indian perspective and
SWOT Analysisin the National conference on
Emerging Trends in Management and Information
Technology” organized by K. S School of Business
Management, Gujarat University, Ahmedabad 8
February, 2020.