BookPDF Available

LIVRO-ISBN-DEF-artesanatonoMA

Authors:

Abstract and Figures

O livro versa sobre o fortalecimento das relações entre artesanato e design que significa a criação de oportunidades para a criatividade, para o desenvolvimento de uma sociedade mais humanizada e sustentável. As pesquisas apresentadas simbolizam a diversidade do tema. Trazem dados empíricos sobre esta realidade, enfatizando que, para além de uma atividade secundária, muitas vezes compartilhada com o trabalho rural, a produção artesanal é parte da cultura e dos saberes e fazeres locais. Esta obra é um olhar sobre o nosso artesanato e colabora para os cenários local e nacional dos estudos em design, práticas artesanais e o mundo do trabalho. (texto retirado da apresentação do livro. p.11)
Content may be subject to copyright.
A preview of the PDF is not available
ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
Este Trabalho foi preparado para apresentação no 5° Congresso Brasileiro de Pesquisa e Desenvolvimento em Petróleo e Gás-5° PDPETRO, realizado pela a Associação Brasileira de P&D em Petróleo e Gás-ABPG, no período de 15 a 22 de outubro de 2009, em Fortaleza-CE. Esse Trabalho foi selecionado pelo Comitê Científico do evento para apresentação, seguindo as informações contidas no documento submetido pelo(s) autor(es). O conteúdo do Trabalho, como apresentado, não foi revisado pela ABPG. Os organizadores não irão traduzir ou corrigir os textos recebidos. O material conforme, apresentado, não necessariamente reflete as opiniões da Associação Brasileira de P&D em Petróleo e Gás. O(s) autor(es) tem conhecimento e aprovação de que este Trabalho seja publicado nos Anais do 5°PDPETRO. Abstract It is generally accepted that global warming is a consequence of the emission of certain gases (GHGs) into the atmosphere, among which carbon dioxide is the main constituent. An alternative to reducing such emissions are the processes of carbon capture and sequestration (CCS). The most expensive and complex step of these processes is the capture, separation and concentration of carbon dioxide from other flue gases. Several separation techniques have been studied (absorption with amines, membranes, adsorption and various reactions). In the last years, the technique of adsorption in porous solids has gained prominence in scientific reports among the other techniques. One difficulty to implement this technology is to obtain adsorbents with high selectivity for CO 2 , high adsorption capacity and which do not alter significantly their properties upon prolonged use (charge and discharge) or large temperature variations. Aiming to the selection of adsorbent materials with such characteristics, textural characterization of some materials were made to estimate surface area, total pore volume and pore size distribution, obtained by isotherms of N 2 at 77 K measured in an AUTOSORB 1-MP apparatus (Quantachrome, USA). Then, traditional models available in the software of the equipment (BET, Dubinin-Radushkevich, BJH, HK, etc.) were used. Adsorption isotherms were measured and compared, using pure CO 2 , N 2 and CH 4 as sorbates, to evaluate the capacity for adsorption between the different gases and thus estimate an apparent selectivity. The experiments were conducted under conditions of pressure up to 10 bar and temperatures of 25 °C. The adsorption isotherms were measured in a magnetic suspension balance (Rubotherm, German). This equipment allows high-resolution gravimetric measurements (0.01 mg), obtained under a wide ranfe of temperatures and pressures, using a microbalance (Mettler AT261, Switzerland). The results showed that activated carbons have high efficiency in the process, with capacities reaching up to 35% of excess adsorbed weight per adsorbent unit mass at 10 bar and 25°C. The process was more efficient at lower temperatures, confirming the exothermic nature of the process.
Article
Full-text available
O texto apresenta reflexão sobre patrimônio imaterial, no âmbito do trabalho desenvolvido para o Iphan, relativo ao Inventário Nacional de Referências Culturais. Busca analisar os limites da metodologia adotada por essa instituição para inventariar celebrações, ofícios e modos de fazer, lugares e formas de expressão dos quilombolas de Alcântara, Maranhão.This paper presents reflections on intangible heritage within of the work to Iphan concerning the National Inventory of Cultural References. It aims to analyze the limits of the methodology adopted by this institution in order to make inventories of celebrations, crafts and ways of making, places and forms of expression of the quilombolas of Alcântara, Maranhão.
Book
Full-text available
O design está se transformando. Observam-se grandes mudanças nos seus horizontes de atuação. Mudanças também são observadas nos instrumentos usados pelo design e nas pessoas que, de forma consciente ou não, o praticam. Não existe nada de novo ou de estranho nestas considerações: o design tem que mudar. Este livro é um testemunho da mudança: Lia Krucken nos conduz a uma reflexão que vai ao centro de alguns temas do design contemporâneo. Integrando transversalmente conhecimentos de diversas disciplinas, a autora aborda um âmbito não convencional à área de design – o território, a biodiversidade, os produtos locais – e a obra assume uma perspectiva evidentemente interdisciplinar. A obra Design e território: valorização de identidades e produtos locais é, portanto, um testemunho da mudança de horizonte em direção ao vasto universo de potencialidades de gerar qualidade nos produtos e serviços. (...) Por Ezio Manzini e Anna Meroni - Politecnico di Milano
Article
Design for Environmental Sustainability is a technical and operative contribution to the United Nations "Decade on Education for Sustainable Development" (2005-2014), aiding the development of a new generation of designers, responsible and able in the task of designing environmentally sustainable products. Design for Environmental Sustainability provides a comprehensive framework and a practical tool to support the design process. The book offers an organic vision of methodologies, tools and strategies for the integration of environmental requirements into product development. Possible strategies and design guidelines are highlighted, accompanied by a large selection of high-quality environmentally-aware product design case studies. Divided into four parts, the first part covers environmental sustainability and presents the general guidelines that can be followed to reach it. The second part examines the Life Cycle Design approach and the strategies to minimise consumption of resources, select low environmental impact resources, optimise product life span, extend the life of materials, and design for disassembly. The third part presents methods and tools to evaluate the environmental impact of products (e.g., Life Cycle Assessment) and other support tools for the integration of environmental requirements into real design processes. The fourth and final part describes the historical evolution of sustainability, both in design practice and research. Design for Environmental Sustainability is an important text for all students, designers and design engineers interested in product development processes.
Article
Prior to Victor Papanek's Design for the Real World and E.F. Schumacher's Small is Beautiful, the Amhedabad Declaration on Industrial Design and Development, which resulted from a meeting in January 1979, has discussed the promotion of industrial design in developing countries. In subsequent years neither ICSID nor UNIDO followed through on this vision but a far more restricted view of design for development. The aim of this paper is to rethink the scope of design for development so it can address the needs of developing countries in the most effective ways.
Article
This article introduces the concept of distributed economies (DE) as a fresh strategy to guide industrial development towards becoming more sustainable. The concept calls for a transformation in the industrial system towards DE departing from the socio-economically and environmentally unsustainable dynamics associated with large-scale, centralised production units that are favoured by neoclassical economic drivers. With DE, a selective share of production is distributed to regions where a diverse range of activities are organised in the form of small-scale, flexible units that are synergistically connected with each other and prioritise quality in their production. However, rather than the total abolishment of large-scale production, our argument concentrates on finding a renewed balance between large- and small-scale and between resource flows that take place within and across regional boundaries. Other desirable characteristics of production units compatible with DE are elaborated. The paper concludes by calling for the deployment of the vast amount of globally and regionally available knowledge for the formation of regionally adapted strategies to create dynamically “self-organizing” business environments.
Article
396 p., graph., ref. bib. : 28 p.1/2 In this groundbreaking paradigm for the economy, three leading business visionaries explain how the world is on the verge of a new industrial revolution, one that promises to transform our fundamental notions about commerce and its role in shaping our future. Over the past decade many farsighted companies have begun to discover remarkable opportunities for saving both money and resources through the ingenious application of novel technologies and business practices. Consider the following. The automobile industry is undergoing a transformation that will spell the end of the petroleum industry and a shift away from traditional car models to Hypercars"―fuel cell-powered vehicles that would be both lighter and safer, produce negligible pollution, cost both the producer and consumer less, and have fuel efficiencies as high as 200 miles per gallon. : New houses designed with heat-trapping "super-windows" can remain cool in temperatures as high as 115° F with no air conditioner and warm at - 47° F with no furnace, and cost less to build. Atlanta-based Interface Corporation is shifting from selling carpeting to leasing floor-covering services, using a new material that's more attractive, requires 97 percent less material, is cheaper to produce, and is completely recyclable. Today's best techniques for using wood fiber more productively could supply all the paper and wood the world currently requires from an area about the size of Iowa. In the long-anticipated new book by Paul Hawken and Amory and Hunter Lovins, these durable, practical, and stunningly profitable principles are synthesized for the first time into the foundations for a system called natural capitalism. With hundreds of thousands of copies of their works in print worldwide, the authors are leaders in set-ting the agenda for rational, ecologically sound industrial development, and in Natural Capitalism they have written their most significant and genuinely inspiring work. Traditional capitalism, they argue, has always neglected to assign monetary value to its largest stock of capital―namely, the natural resources and ecosystem services that make possible all economic activity, and all life. Natural capitalism, in contrast, takes a proper accounting of these costs. As the first step toward a solution to environmental loss, it advocates resource productivity-doing more with less, wringing up to a hundred times as much benefit from each unit of energy or material consumed. Natural capitalism also redesigns industry on biological models that result in zero waste, shifts the economy from the episodic acquisition of goods to the continual flow of value and service, and prudently invests in sustaining and expanding existing stores of natural capital. Drawing upon sound economic logic, intelligent technologies, and the best of contemporary design, Natural, Capitalism presents a business strategy that is both profitable and necessary. The companies that practice it will not only take a leading position in addressing some of our most profound economic and social problems, but will gain a decisive competitive advantage through the worthy employment of resources, money, and people.
Conference Paper
The author explores the need for improved modeling and analysis support to make DFE (design for environment) a practical aspect of integrated product development. He points out that an integrated life cycle model (ILCM) for design verification is needed for effective use of DFE in integrated product development. The ILCM should be capable of assessing the relative importance of environmental, health, and safety issues associated with all product life cycle stages, should explicitly represent uncertainty, and should allow evaluation of economic impacts associated with product strategy decisions. For practical reasons, the ILCM should be available as part of a customized computer-aided design and engineering (CAD/CAE) environment to allow integrated assessment and optimization of strategic decisions. One economic modeling approach well-suited to development of an ILCM is dynamic simulation using generic business process models
Industrialização e emprego no Brasil
  • J Almeida
ALMEIDA, J. Industrialização e emprego no Brasil. Rio de Janeiro: IPEA/INPES. 1974, p.134.