Conference Paper

Identification of lack of knowledge using analytical redundancy applied to structural dynamic systems

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

Abstract

Reliability of sensor information in today's highly automated systems is crucial. Neglected and not quantifiable uncertainties lead to lack of knowledge which results in erroneous interpretation of sensor data. Physical redundancy is an often-used approach to reduce the impact of lack of knowledge but in many cases is infeasible and gives no absolute certainty about which sensors and models to trust. However, structural models can link spatially distributed sensors to create analytical redundancy. By using existing sensor data and models, analytical redundancy comes with the benefits of unchanged structural behavior and cost efficiency. The detection of conflicting data using analytical redundancy reveals lack of knowledge, e.g. in sensors or models, and supports the inference from conflict to cause. We present an approach to enforce analytical redundancy by using an information model of the technical system formalizing sensors, physical models and the corresponding uncertainty in a unified framework. This allows for continuous validation of models and the verification of sensor data. This approach is applied to a structural dynamic system with various sensors based on an aircraft landing gear system.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

ResearchGate has not been able to resolve any citations for this publication.
Article
Full-text available
The integration of data and knowledge from several sources is known as data fusion. This paper summarizes the state of the data fusion field and describes the most relevant studies. We first enumerate and explain different classification schemes for data fusion. Then, the most common algorithms are reviewed. These methods and algorithms are presented using three different categories: (i) data association, (ii) state estimation, and (iii) decision fusion.
Conference Paper
Full-text available
This paper presents a sensor fusion strategy based on Bayesian method that can identify the inconsistency in sensor data so that spurious data can be eliminated from the sensor fusion process. The proposed method adds a term to the commonly used Bayesian technique that represents the probabilistic estimate corresponding to the event that the data is not spurious conditioned upon the data and the true state. This term has the effect of increasing the variance of the posterior distribution when data from one of the sensors is inconsistent with respect to the other. The proposed strategy was verified with the help of extensive simulations. The simulations showed that the proposed method was able to identify inconsistency in sensor data and also confirmed that the identification of inconsistency led to a better estimate of desired state variable
Book
Modern mineral processing plants are required to be safe and profitable and to minimize their environmental impact. The consequent quest for higher operational standards at reduced cost is leading the industry towards automation technologies as capital-effective means of attaining these objectives. Advanced Control and Supervision of Mineral Processing Plants describes the use of dynamic models of major items of mineral processing equipment in the design of control, data reconciliation and soft-sensing schemes; through examples, it illustrates tools integrating simulation and control system design for comminuting circuits and flotation columns. Full coverage is given to the design of soft sensors based on either single-point measurements or more complex measurements like images. The chief issues concerning steady-state and dynamic data reconciliation and their employment in the creation of instrument architecture and fault diagnosis are surveyed. In consideration of the widespread use of distributed control and information management systems in mineral processing, the book describes the current platforms and toolkits available for implementing such advanced systems. Applications of the techniques described in real mineral processing plants are used to highlight their benefits; information for all of the examples, together with supporting MATLAB® code can be found at www.springer.com/978-1-84996-105-9. The provision of valuable tools and information on the use of modern software platforms and methods will benefit engineers working in the mineral processing industries, and control engineers and academics interested in the real industrial practicalities of new control ideas. The book will also be of interest to graduate students in chemical, metallurgical and electronic engineering looking for applications of control technology in the treatment of raw materials.
Article
After a short overview of the historical development of model-based fault detection, some proposals for the terminology in the field of supervision, fault detection and diagnosis are stated, based on the work within the IFAC SAFEPROCESS Technical Committee. Some basic fault-detection and diagnosis methods are briefly considered. Then, an evaluation of publications during the last 5 years shows some trends in the application of model-based fault-detection and diagnosis methods.
Article
The C++ package ADOL-C described in this paper facilitates the evaluation of first and higher derivatives of vector functions that are defined by computer programs written in C or C++. The numerical values of derivative vectors are obtained free of truncation errors at mostly a small multiple of the run time and a fix small multiple random access memory required by the given function evaluation program. Derivative matrices are obtained by columns, by rows or in sparse format. This tutorial describes the source code modification required for the application of ADOL-C, the most frequently used drivers to evaluate derivatives and some recent developments. @InProceedings{walther:DSP:2009:2084, author = {Andrea Walther}, title = {Getting Started with ADOL-C}, booktitle = {Combinatorial Scientific Computing}, year = {2009}, editor = {Uwe Naumann and Olaf Schenk and Horst D. Simon and Sivan Toledo}, number = {09061}, series = {Dagstuhl Seminar Proceedings}, ISSN = {1862-4405}, publisher = {Schloss Dagstuhl - Leibniz-Zentrum fuer Informatik, Germany}, address = {Dagstuhl, Germany}, URL = {http://drops.dagstuhl.de/opus/volltexte/2009/2084}, annote = {Keywords: ADOL-C, algorithmic differentiation of C/C++ programs} }
Conference Paper
Agreement problems involve a system of processes, some of which may be faulty. A fundamental problem of fault-tolerant distributed computing is for the reliable processes to reach a consensus. We survey the considerable literature on this problem that has developed over the past few years and give an informal overview of the major theoretical results in the area. 1 Agreement Problems To achieve reliability in distributed systems, protocols are needed which enable the system as a whole to continue to function despite the failure of a limited number of components. These protocols, as well as many other distributed computing problems, requires cooperation among the processes. Fundamental to such cooperation is the problem of agreeing on a piece of data upon which the computation depends. For example, the data managers in a distributed database system need to agree on whether to commit or abort a given transaction [20, 26]. In a replicated file system, the nodes might need to agree o...
  • Pk-Lqp
  • Knkt Report
KNKT, Aircraft Accident Investigation Report: Boeing 737-8 (MAX), PK-LQP, Report KNKT.18.10.35.04, 29 October 2018.
Multisensor data fusion: A review of the state-of-the-art, in: Information Fusion
  • Khaleghi
  • Bahador
Khaleghi, Bahador, et al.; Multisensor data fusion: A review of the state-of-the-art, in: Information Fusion, 14, 2013, pp. 28-44.
Fault Detection and Diagnosis for Electrohydraulic Actuators
  • R Kreß
Kreß, R., et al.; Fault Detection and Diagnosis for Electrohydraulic Actuators, in: IFAC Proceedings Volumes, 33, 2000, pp. 983-988.
Unsicherheitsklassifizierung anhand einer Unsicherheitskarte, Internal Report, Chair of Fluid Systems
  • P F Pelz
  • P Hedrich
P. F. Pelz, P. Hedrich, Unsicherheitsklassifizierung anhand einer Unsicherheitskarte, Internal Report, Chair of Fluid Systems. 2015. Darmstadt.
  • A G Baydin
  • B A Pearlmutter
  • A A Radul
  • J M Siskind
Baydin, A. G. ; Pearlmutter, B. A. ; Radul, A. A. ; Siskind, J. M.: Automatic Differentiation in Machine Learning: a Survey. In: Journal of Machine Learning Research 18 (2018), No. 153,pp. 1-43.