Conference PaperPDF Available

Development of RFID-aided system for reducing inspection time in offsite construction project



The inspection process and time taken when handling prefabricated materials during the supply phase can be difficult and lengthy, if based on manual methods. A scenario-based case study has been undertaken in this research, where initial observations revealed the need for a time-saving tracking approach. This could result in the reduction of process waste and in an increase in productivity. As a preliminary step after problem identification, development of radio frequency identification (RFID)-aided component tracking system takes place. Works have been conducted considering RFID in academia previously, aiding different industries. However, this research is specific to a factory case in Melbourne, Australia and considers inspection time and losses due to misplacement of items and rework.
[S1-1] Smart Building and City for Durability & Sustainability
- Sung-woo Shin (Chairman, SBE19 Seoul Conference)
[S1-2] Neighborhood Performance Assessment and SNTool
- Nils Larsson (CEO, International Initiative for a Sustainable Built Environment(iiSBE))
[S1-3] Celebrating Life: The Role of Social and Ecological Systems in Smart Sustainable Cities
- Annie R. Pearce (Virginia Tech University)
[S2-1] Analysis of compressive strength growth of concrete considering the interactions between hydration
and drying
- Xiao-Yong Wang (Kangwon National University)
- In-Suk Yoon (Induk University)
[S2-3] Nano-structure of cementitious materials and its application for multi-functional construction materials
- Juhyuk Moon (Seoul National University)
[S2-4] Innovative and Sustainable Cementitious Materials
- Seyoon Yoon (Kyonggi University)
[R1-1] Interactive Data Visualisation of the Built-Environment for Smart City Analytics
- Duncan Smith (University College London)
[R1-2] Sejong Smart City: Urban design strategies to make better place for the future
- Ji-Eun Kim (Korea Planning Association)
[R1-3] Developing Simulation Model for Smart Urban Management
- Dong-Han Kim (Korea Research Institute for Human Settlements)
- 7
[TS1-1] Irregular High-rise Building subject to Earthquake Forces
- Behzad Mohammadzadeh
[TS1-2] Development of Heat Reduction Technology Using Data Sharing and Green Infrastructure
- Jaekyoung Kim
[TS1-3] An analysis of the achieved credits and project goal of the LEED 2009 certified buildings in Vietnam
- Duy-Hoang Pham
[TS1-4] Development of GCI for the Early Stage of Green Building Design in China
- Yu Liu
[TS1-5] Evaluation of the Energy Performance of a Net Zero Energy Building
- Minjae Shin
[TS1-6] Green Building Rating Systems and Sustainable Development Goals in Vietnam
- Le Thi Hong Na
[TS2-1] Summertime overheating in a sustainable multi-residential development in Melbourne, Australia
- Jin Woo
[TS2-2] The Role of Reference Groups and Entitativity in the Group Identification process for Personalized
Normative Messaging Interventions
- Kwonsik Song
[TS2-3] Association Rule Mining Approach for Analysis of BIM Issues in the Design Conversion Phase
- Ly Dang Huy
[TS2-4] Application of Defect Data Analysis for Construction Defect Management by Using Association Rule
- Nguyen Dang Hoang Nhat Truong
[TS2-5] Cyber Security Awareness in BIM/VDC-Related Courses at Higher Education Institutions
- Min-Jae Suh
[TS2-6] Green Climate Fund Financing for Energy Efficiency Infrastructure Projects in Developing Countries
- Sung Yoon
- 8
[TS3-1] Strategies And Lessons Learned To Create Virtual Reality Immersive Games For Construction Safety
- Dongnyeok Han
[TS3-2] Thermal Benefit of Residential Building with Vertical Planting Balcony in Urban
- Po-Cheng Chou
[TS3-3] Arup Neuron Platform for One Taikoo Place Develop New Benchmark of Building Sustainability
Through Artificial Intelligence & Digital Technologies
- Alvin Lo
[TS3-4] A Case Study Of Integrative Design Process To Achieve A Zero-Energy School
- Brian Baewon Koh
[TS3-5] Analysis of bridge condition rate and maintenance according to service years using NBI database
- Hyunsik Kim
[TS3-6] Analytic Approaches for Sustainable Business Model Innovation of Construction Companies
- Youjin Jang
[TS4-1] A Fundamental Study on Properties of Cement Mortar for 3D Printing Concrete Using Methyl-
Cellulose Thickener
- Hansol Kim
[TS4-2] The carbonation characters of cement-based materials containing -C2S and slag
- Zhengxin Chen
[TS4-3] Preservation of Historical Un-Reinforced Masonry Structures
- Fahimeh Yavartanoo
[TS4-4] Influence of quartz powder in cement hydration and compressive properties
- Run-sheng Lin
[TS4-5] Resilience of Tall Building Structures against Seismic and Wind Events
- Hamidreza Alinejad
[TS4-6] Preparation and characterization of microencapsulated stearic acid with silicon dioxide shell
through sol-gel process
- Shafiq Ishak
[TS4-7] Evaluation of Structural Durability under Multi-Hazards by Nonlinear Analysis
- Seung-Yong Jeong
- 9
[TS5-1] Review of Power Generation Using Wind Turbine System on High Rise Building
- Sanghee Kim
[TS5-2] Vitality Housing A Service Model for Transitional Social Housing in Hong Kong
- Tim Lo
[TS5-3] The Development of a GIS-Based Model for Assessing Universities Outdoor Space Design
- Mohammed Gabr
[TS5-4] AI Algorithm Development and Key Variables for Smart Building
- Myungjin Chae
[TS5-5] A Theoretical Concept of Heterogeneous Robots for Infrastructure Maintenance System (HR4IMS)
in Future Smart City
- Sungjin Kim
[TS5-6] Enhancing Comprehensive Quality Assurance of Construction Projects toward Smart City
Sustainability using Blockchain Technology
- Kyubyung Kang
[TS5-7] City Dashboard: the integrated platform to create smart cities
- Seungho Yoo
[TS5-8] Review of Self-Climbing Systems for Façade Installation in High-Rise Developments
- Jordan Dupont
[TS6-1] Environmental Life Cycle Assessment of buildings in Europe
- Rolf Frischknecht
[TS6-2] Case study on Particulate matter Monitoring and Influence Factor on Construction Site
- Ding Yiwei
[TS6-3] Fundamental Study on the Proposal of Fine Dust Measurement Method in Construction Sites
- Ji-Hwan Yang
[TS6-4] Open space on low energy high rise apartment in warm humid tropics
- Vivien Soebiyan
[TS6-5] Research on Sustainable Development Strategy of Existing Rural Buildings
- Xudong Zeng
[TS6-6] Causes of Rework in Modular Construction Design Process
- Hosang Hyun
[TS6-7] Comparison study on Environmental Impact of 5 different buildings; Apartment, Timber-framed
house, Han-ok, Passive house and Modular house
- Sunghee Kim
- 10
[TS7-1] Energy performance analysis for the zero energy commercial building in a warm and dry climate
- Sukjoon Oh
[TS7-2] Development of Evaluation Factors for Port Facility Maintenance
- Suyeul Park
[TS7-3] Green Maintainability and Future Adaptive Reuse of the Net Zero Energy Building (NZEB) in Singapore
- Sheila Conejos
[TS7-4] The production of bio-oil derived from sustainablelignin via hydrothermal liquefaction
- Gahee Kim
[TS7-5] Development of RFID-aided system for reducing inspection time in offsite construction project
- Fida Hussain Siddiqui
[TS7-6] Valuation of the Impact of Climate Change and Urban Heat Island Effect on Building Energy Demand
in Seoul, Korea
- Choul-Woong Kwon
[TS7-7] Feature Selection and Engineering for Improving PV Power Output Predictions with Machine Learning
- Young-Tae Chae
[TS8-1] Effect of annealing on mechanical property of (Cu60Zr25Ti15)99Sn1bulk metallic glass
- Soumen Mandal
[TS8-2] Sodium Hydroxide and Sodium Silicate Activated Glass Powder-GGBS Blended Geopolymer Mortar
- Sasui Sasui
[TS8-3] Mechanical Properties and Hydration Kinetics of CNT/TNT Hybrid Reinforced Cementitious Composites
- Liu Junxing
[TS8-4] Sustainable Practices for Strengthening of Unbonded PT RC Beams against Impact
- Andrew Nghiem
[TS8-5] A Fundamental Study on the Prediction of Concrete Carbonation Coefficient Using Deep Neural
- Do-Hyun Jung
[TS8-6] Neutron Shielding Performance of PE-B4C Composite-incorporated Cement Paste
- Jaeyeon Park
[TS8-7] Characterisation of Ammonium Phosphate and Caesium Nitrate Treated Al Coating
- Jitendra Kumar Singh
- 11
... represents the digital skills, categories and relevant terminologies utilised in the literature. Different categories i.e., Automation & Robotics, Coding & Programming, Communication, Design, Drafting & Engineering, Digital Literacy, Digitisation & Virtualisation, Modelling & Simulation, and Planning & Estimation as presented inTable 1were formed partially based on inspiration from(Oesterreich & Teuteberg, 2016;Tayeh et al., 2020) and authors' mutual brainstorming sessions.Automation & Robotics:Growing advancements in the sector recently, has increased the usage of several tools and methodologies such as 3D printing, automation-based technologies, autonomous vehicles, offsite construction and manufacturing, drones/unmanned aerial vehicles (UAVs)(Hossain et al., 2020;Li & Liu, 2019;Siddiqui et al., 2019). The integration of automation and robotics technologies in the construction sector has resulted in improvements in cost, safety, quality and productivity(García de Soto et al., 2019). ...
Full-text available
As an important part of power system, the safe and stable operation of distribution network affects the power quality of the whole society and the reliability of power grid operation. As a technology widely used in Internet of things equipment, radio frequency identification (RFID) has the characteristics of non-contact reading and wide identification range, which is especially suitable for the working situation of patrol distribution network equipment. Based on radio frequency identification technology, non-contact two-way communication is carried out. According to the task transmitted from the workstation, the inspection results are recorded, and the field data is transmitted to the background management system through the wireless communication network. The intelligent purpose of the distribution network inspection system is realized, so as to improve the inspection efficiency and the reliability of the power grid operation.
ResearchGate has not been able to resolve any references for this publication.