Conference Paper

Tracking of Aging Processes in Power Electronic Converters Using the Rainflow Method

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

Article
Full-text available
What does it mean to achieve a 100% renewable grid? Several countries already meet or come close to achieving this goal. Iceland, for example, supplies 100% of its electricity needs with either geothermal or hydropower. Other countries that have electric grids with high fractions of renewables based on hydropower include Norway (97%), Costa Rica (93%), Brazil (76%), and Canada (62%). Hydropower plants have been used for decades to create a relatively inexpensive, renewable form of energy, but these systems are limited by natural rainfall and geographic topology. Around the world, most good sites for large hydropower resources have already been developed. So how do other areas achieve 100% renewable grids? Variable renewable energy (VRE), such as wind and solar photovoltaic (PV) systems, will be a major contributor, and with the reduction in costs for these technologies during the last five years, large-scale deployments are happening around the world.
Article
Full-text available
Molded IGBT modules are widely used in low power motor drive applications due to their advantage like compactness, low cost, and high reliability. Thermo-mechanical stress is generally the main cause of degradation of IGBT modules and thus much research has been performed to investigate the effect of temperature stresses on IGBT modules such as temperature swing and steady-state temperature. The temperature swing duration is also an important factor from a real application point of view, but there is a still lack of quantitative study. In this paper, the impact of temperature swing duration on the lifetime of 600 V, 30 A, 3-phase molded Intelligent Power Modules (IPM) and their failure mechanisms are investigated. The study is based on the accelerated power cycling test results of 36 samples under 6 different conditions and tests are performed under realistic electrical conditions by an advanced power cycling test setup. The results show that the temperature swing duration has a significant effect on the lifetime of IGBT modules. Longer temperature swing duration leads to the smaller number of cycles to failure. Further, it also shows that the bond-wire crack is the main failure mechanism of the tested IGBT modules.
Book
Full-text available
Reliability of Power Electronic Converter Systems outlines current research into the scientific modeling, experimentation, and remedial measures for advancing the reliability, availability, system robustness, and maintainability of Power Electronic Converter Systems (PECS) at different levels of complexity. Drawing on the experience of an international team of experts the book introduces reliability engineering in power electronic converter systems, and goes on to cover a range of topics including: ◾anomaly detection and remaining life prediction for power electronics; ◾reliability of DC-link capacitors in power electronic converters; ◾reliability of power electronics packaging; modeling for life-time prediction of power semiconductor modules; ◾minimization of DC-link capacitance in power electronic converter systems; ◾wind turbine systems; ◾smart control strategies for improved reliability of power electronics systems; ◾lifetime modelling; ◾power module lifetime test and state monitoring; tools for performance and reliability analysis of power electronics systems; ◾fault tolerant adjustable speed drive systems; ◾mission profile oriented reliability design in wind turbine and photovoltaic systems; ◾reliability of power conversion systems in photovoltaic applications; ◾power supplies for computers; and high-power converters. This title is essential reading for any researchers, professionals and students working with power electronics and their applications
Conference Paper
Full-text available
DC-link capacitors are an important part in the majority of power electronic converters which contribute to cost, size and failure rate on a considerable scale. From capacitor users' viewpoint, this paper presents a review on the improvement of reliability of DC-link in power electronic converters from two aspects: 1) reliability-oriented DC-link design solutions; 2) conditioning monitoring of DC-link capacitors during operation. Failure mechanisms, failure modes and lifetime models of capacitors suitable for the applications are also discussed as a basis to understand the physics-of-failure. This review serves to provide a clear picture of the state-of-the-art research in this area and to identify the corresponding challenges and future research directions for capacitors and their DC-link applications.
Conference Paper
Full-text available
We present the results of power cycling tests of transfer molded, DCB and copper based power components at temperature swings up to 155 K. The results of the DCB based components are statistically analysed with Weibull distribution. An Analysis of the components after the tests provides an overview on the failure mechanisms. The results of the DCB based, transfer molded components exceed the expectations based on extrapolation of LESIT results.
Article
A new equivalent definition of the rainflow cycle counting method is presented, which expresses the rainflow cycle amplitudes in explicit analytical formulae. The method attaches to each maximum of the strain function the amplitude of a corresponding cycle or two half cycles, which are evaluated independently from each other. This definition is more convenient for the statistical analysis of rainflow cycle amplitudes for a random loading process.
Conference Paper
A large number of power cycling data from different IGBT module generations and test conditions have been evaluated. Multiple regression with respect to the variables temperature swing DeltaTJ, TJ, power-on-time (ton), chip thickness, bonding technology, diameter (D) of bonding wire, current per wire bond (I) and package type was performed. It provided parameters for a new empirical model describing number of power cycles (Nf) in relation to these variables. For a fixed module technology and blocking voltage class, the set of variables have been restricted to DeltaTJ, TJ, ton and I as the factors influencing the number of cycles to failure. The model is used to estimate the power cycling capability for the new generation of 1200V-IGBT4 Modules, which are rated up to a junction temperature of 150deg C in operation.
Article
Two simple algorithms for performing rainflow counting are presented in this paper. The second algorithm is suitable for microcomputer devices that are placed in vehicles to record field data.
Article
Two forms of the rainflow cycle counting algorithm for fatigue damage prediction are shown to be equivalent, namely the three-point algorithm as presented by Bannantine et al. [Bannantine JA, Comer JJ, Handrock JL. Fundamentals of metal fatigue analysis. Englewood Cliffs, NJ: Prentice-Hall; 1990], and the four-point algorithm as presented by Amzallag et al. [Amzallag C, Gerey JP, Robert JL, Bahuaud J. Standardization of the rainflow counting method for fatigue analysis. Int J Fatigue 1994; 16:287-293]. While it can be demonstrated by example that the same result is obtained by the two algorithms, no generalised proof of their equivalence has previously been presented. The proof is built on several identified properties of the four-point algorithm, including that certain modifications to the stress series being analysed do not alter the outcome.