Content uploaded by Hazel Monica Matias Peralta
Author content
All content in this area was uploaded by Hazel Monica Matias Peralta on Jan 17, 2019
Content may be subject to copyright.
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
*Corresponding author: norazlinh@uthm.edu.my
2018 UTHM Publisher. All right reserved.
e-ISSN: 2600-7924/penerbit.uthm.edu.my/ojs/index.php/jst
Application of Starch and Starch-Based Products in Food Industry
Nurulain Syuhada Mohamad Yazid, Norazlin Abdullah*, Norhayati Muhammad and Hazel
Monica Matias-Peralta
Department of Technology and Natural Resources, Faculty of Applied Sciences and Technology, Universiti Tun
Hussein Onn Malaysia, Pagoh Educational Hub, 84600 Pagoh, Johor, Malaysia.
Received 30 September 2017; accepted 16 May 2018; available online 1 August 2018
1. Starch
Starch, which is the most plentiful
carbohydrate stored in a plant acts as the key
factor in determining quality of food products
[1]. Moreover, it is one of the most important
polymers that has been extensively used daily
in both food and non-food application [2]. It is
normally derived from natural source of
polymer, available in abundance, low cost and
usually consumable and edible by animal or
any living creature [3]. According to [4],
various functions of most studied biopolymers
which are starch basically due to its easily
available. Koko Krunch is an example of
Malaysian most common consumed cereal
grains by kids or even adults in conjunction
with a study reported that the main source of
energy is coming from starch present in cereal
grains [5]. Moreover, it comes from a variety
of source worldwide such as barley, corn,
potato, wheat, tapioca and rice [6].
Corn, potato, rice, tapioca and wheat are
the main available source of commercially
produced starches in the market [7]. These five
starches have been categorised as gluten-free
starch which suits well for people with
allergen towards gluten [8]. Hence, making
starch as a major raw material for food
industrial purpose. A brief explanation on
several selected types of food crops including
barley, corn, wheat, potato, rice and tapioca
containing starch will be described in the
following paragraphs.
Barley (Hordeum vulgare L.) is a good
source of gluten-free flour producing bread
with a more compact texture as compared to
bread made up of wheat flour containing
gluten [9]. Furthermore, malt and beer
production is depending on barley produced as
its main raw material, while it is also used for
animal feed [10]. Livestock energy, human gut
health and fermentable sugars in brewing are
depending on the degraded functional
properties of barley [11]. It has been found by
previous study that by substituting wheat with
barley bran, capability of dough water
absorption was increased up to 71.5% in
chapatti production [12].
There are differences between a normal
and naked barley or known as hull-less barley
which commonly consumed by Tibetan people
in Tibetan Plateau. Naked barley easily had
undergone threshing process. Threshing is
known as a process of separating seeds from
its husks or hulls [13]. During retrogradation,
barley containing longer chains of amylopectin
performs more perfect crystals and a higher
peak temperature (Tp) achieved when it has
been analysed by using differential scanning
Abstract: Starch is an edible polymer derived from plant basis. It is commonly used in food industry as it
offers good stabilising effect. Moreover, starch can be easily modified either physically or chemically
making it a very versatile source. For instance, its capability to be easily modified and coming from low
cost source making starch as one of the most important ingredient in food preparation. There are currently
varieties of commercially modified starch available in Malaysian market. For example, potato, corn, wheat
and tapioca starch are presently on the top list. However, there are also numbers of unexplored native starch
for example from fruits processing waste. Besides, these fruit by-products are considered as underutilised
source of starch. Although there are few existing reported studies on starch extracted from fruits seed and
other waste products, more new sources are believed to be explored in future according to particular starch-
based products industries and demands. Therefore, this review discusses current starch based-products
developments and application of unconventional starch in food industry.
Keyword: Food Industry; Modified Starch; Physicochemical Properties; Starch; Waste.
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
145
calorimetry (DSC) [14]. Thus, it supports
claim made by recent study that barley is
currently on number four of most consumed
cereal crop worldwide [15].
Corn starch is as important as any other
starch in industrial use. Starch isolated from
corn was fused into many baked goods such as
cookies, cakes, icings and fillings due to its
ability in maintaining moisture content,
prevent growth of crystal from sugars and
enhanced juiciness [16]. Corn starch also
provides consistency and good gelling
properties during heating of corn-banana
custard paste [17]. Furthermore, 25% of
amylose was reported present in normal corn
starch granule [18]. [19] reported that 50%
from total starch production has been utilised
by food industry. According to [20], costs
could be saved and at the same time cow’s
dairy produced could be maintained by
supplying cow with low-corn starch based
diets. By partially substituting wheat flour
with corn resistant starch, a whiter, less
yellowish and reddish cake was produced [21].
Another fun fact of corn is that in industries, it
comes in two varieties which is normal corn
starch and the other one is waxy corn starch.
The composition of amylose and amylopectin
varies depending on starch origin. Amylose
present in a starch molecule in the range of 20
– 30%. Whereas, highly branched glucose
polymer present at about 70% in a starch
molecule known as amylopectin. This is
specifically for normal starch. However, the
situation changes for waxy starch when the
composition is 100% amylopectin [22].
Wheat, which is scientifically known as
(Triticum aestivum) has been the oldest and
most consumed crop in various forms of food
products worldwide such as cake, cookies and
bread due to its promising energy supplies and
other good constituents [23]. Baking quality of
wheat products such as cookies and bread are
depending on the starch molecular structure
and its properties [24]. Lipids, protein and
starch are main component of wheat flour [25].
Despite of being world’s leading food
component, high consumption of wheat-based
product can result in a negative health impact
such as obesity and type 2 diabetes [26]. In
Malaysia, bran and wheat germ bread
produced by Gardenia brand is an example of
how wheat by products have been utilised by
food industry which accounted 10% from the
cereal waste production. Recent study claimed
that the wheat bran has been disposed as
animal feedstock despite of its rich-antioxidant
properties [27].
Potatoes are produced mostly in a mild
climate area whereas harvested products will
be collected upon reaching autumn season
[28]. Despite of its well played role in food
industry, potato starch was also found to
function well in paper and textile sizing
together with stiffening laundered fabrics [29].
Recent study reported that phosphorous which
was found in starch of potato at a peak amount
may affect functionality of this particular
starch [30]. According to [31], potato starch
does not respond well to pressure-induced
gelatinization. In general, gelatinization is a
process occurring in the presence of water and
heat. Even though potato is the most consumed
food crop worldwide, it has been labelled as
contains a high glycaemic index (GI) due to its
ability in causing sharp increase of blood
glucose level [32]. Starch produced from
tapioca and potato have been extensively
applied by both food and non-food industries
[33]. Therefore, potato is also crucial in food
industry for starch production.
Rice (Oryza sativa L.) starch which is
made up of majority 70 – 80% of branched
amylopectin and 20 – 30% of linear amylose,
is normally eaten in the form of cooked rice
[34]. In Maluku, Indonesia, rice production per
annum can only fulfil about 40% of
consumer’s demand. Starch presence in rice
cause it one of the most utmost food crops
consumed in Asian countries like Malaysia,
Indonesia and Thailand [35]. Recent study
stated that food and non-food industries are
enjoying benefits obtained from versatility of
rice starches [36]. Different region produced
different taste and variety of rice. As an
example, there are two most common
consumed rice varieties known as Basmathi
and Irri in Pakistan. Even in Malaysia, people
are common with Basmathi rice type imported
from Pakistan due to its promising aroma and
quality. This is supported by a recent study,
which found that the Basmathi rice is pricier
but contains more aromas whereas Irri rice is a
way cheaper due to its non-aromatic properties
[37]. It can be concluded that rice is staple
food for Southeast region.
Tapioca (Manihot esculenta Crantz) has
been processed into sago and starch which
could be found abundantly in Tamil Nadu,
India [38]. Besides, it is a good source of
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
146
starch in forming soft and transparent gel
despite of its low protein content [39]. Sour
starch produced from cassava starch can be
used in bread-making and pastry production or
as an alternative for gluten-free bread [40].
This is consistent with previous research,
which claimed that rice, potato and tapioca
starch as the most leading used starches in the
production of many gluten-free products in
terms of texture characteristics [41]. Recent
study stated that tapioca can grow well in low
rainfall areas and barren soil thus making it an
attractive source of starch [42]. In many food
products, thickening and gelling properties
were supplied by tapioca starch [43]. There are
few benefits of tapioca starch for example
contains no smell, clarity of paste and
stickiness which is favourable in food industry
[44]. Therefore, tapioca or cassava is also as
essential as other source of food crops.
Starch is actually an insoluble
carbohydrate, which composed of α-glucose
polymers [45]. There are two most essential
components present in starch compound which
are amylose and amylopectin. These two
major polysaccharides present in starch
supports the characteristics of biodegradable
and thermoplastic polymer [46]. In a chain of
glucose polymers, there are bonds that joining
them, which are α-1,4- and α-1,6-glycosidic
linkages [47]. According to [11], it is way
much easier to hydrolyse starches with α-1,4-
glycosidic bonds than α-1,6-glycosidic bonds.
Amylase is the most important enzyme in
catalysing α-1,4-glycosidic bonds in a starch
polymer [48].
Low molecular weight with several long
branches belongs to amylose, whereas a vast
number of short branches and highly branched
polymers belong to amylopectin [49].
Moreover, within the starch granule, amylose
and amylopectin are found in the form of
water soluble lamellae and semi-crystalline
structure [50]. Normally in starch harvested
products, amylose was found to be 20 – 30%,
while amylopectin 70 – 80% and this amylose
to amylopectin ratio are crucial in determining
each different starch physicochemical
properties [51].
Biological genetics backgrounds of a
starch source have a great influence in amylose
and amylopectin ratio [52]. Starch derived
from carbohydrates has a wide range of
functions in variety of food products [53]. In
addition, many different industries have
utilised the goodness of starch functions and
not only applicable in food industry such as in
cosmetics, textile, paper and pharmaceutical
industry [54]. On the other hand, cooking,
processing, organoleptic capabilities and
starchy food digestibility are all influenced by
amylose to amylopectin ratio [55]. In a recent
study reported that when comparing between
amylose-rich starch and amylopectin-rich
starch in terms of expanding in size,
amylopectin-rich starch did way better [56].
Therefore, starch structural and functional
properties depend solely on content and
structure of amylose and amylopectin [57].
Table 1 [58] elaborates amylose and
amylopectin in starch.
Table 1 Amylose and amylopectin in starch.
[58]
Photosynthesis plays important roles in
synthesising glucose molecules in plant cells.
Higher photosynthetic rate produces greater
yield productions. Starch is carbohydrate end
product obtained from plants when they
perform photosynthesis and each plant have
different starch distribution amount depending
on its species [59]. On the other hand, fruits
are undeniably containing all the goodness of
antioxidants and helps in maintaining one’s
health and weight management. Nutritionist
and dietician will always advise a client under
their consultation to consume more fruits due
to its promising health benefits. However,
recent study on several commonly consumed
tropical fruits in Nigeria claimed that for
people with type 2 diabetes may not suggested
to have high intake of fruits due to starch
presence in that particular fruit [60].
Starch will be less functional if it is in its
native conditions despite of its sources and
origins. This is supported by previous study,
which stated few disadvantages of native
starch such as sensitive towards pH, low
clarity of starch paste, high retrogradation, low
in syneresis and decomposition [61]. Besides,
starch presence in banana is good for human’s
blood glucose control as resistant starch in
banana preventing one’s blood glucose level to
have rapid increase. However, if banana starch
Amylose
Amylopectin
Linear polymer
Branched polymer
α-1,4-glycosidic
linkages
α-1,4- and α-1,6-
glycosidic linkages
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
147
applied in industry requiring this particular
starch to swell properly, forming gel and hold
moisture, it will not be able to do so in its raw
conditions and yet modification still in need
fulfilling such demands [62]. Therefore, next
section will be discussing on application of
starch in food industry and modification of
starch.
2. Application of Starch
Starch is the main source of energy in the
human diet. Due to its practicality in diverse
application of food products, starch is gaining
biggest attention as compared to other
carbohydrate polymers [63]. Breakfast cereals,
bread, cookies, pasta, pastries and noodles are
among commonly processed cereal grains
[64]. These are among the most common
starch containing products available in
Malaysia. On the other hand, appearance,
grade and shape of foods depending on starch
viscosity attributes, retrogradation and pasting
elements making starch as the main functional
components in food products [65]. Ability of
starch in nature to react with itself or other
compounds leads to several usage in food
systems such as thickener, gelling agent,
stabilizing agent or as filler [66].
Normally, it can be found in the plants,
where carbohydrate store starch in the amplest
amount. According to the Malaysian Food
Pyramid, as prescribed by Ministry of Health
Malaysia, the base part of the pyramid is made
up of carbohydrate food sources such as bread,
cereals, and rice [67]. Therefore, starches
based food products provide 50 – 55% of the
total daily energy of a human being.
Moreover, starch is also significant in
providing energy for animal feed and
feedstock. In the food industry, starch is an
essential food additive due to its gel-forming
ability, thickening agent and stabilising food
products [68, 69]. A study was done to help
people with dysphagia, which is difficulty in
swallowing starch-based products, by
modifying food consistency using sago and
tapioca starch that acts as thickener [70].
Different starches source fulfilling various
industrial demands. As an example, sago
starch is great in terms of elasticity, softness,
flexible to use and less adhesive [71]. As
compared to tapioca starch that has a very
cohesive texture despite of its better cold
stability [72].
On the other hand, native starch extracted
from tapioca may be potentially applied as a
new thickener for fruit fillings [73]. According
to [74], food industries consider well on
physical, chemical, physicochemical, pasting
and thermal properties of tapioca flour and
starch. The versatility of starch is not only
applicable to the food industry, but also in
pharmaceutical use. Starch extracted from
water chestnut fruits and pine tree seed or also
known as pinhão were tested for their ability to
act as excipients or drug delivery [75, 76].
Other than that, starch is crucial in edible film
production. For example, rice husk fibre starch
was used to produce film [77]. In another case
where modified corn starch films were used to
coat Red Crimson grapes making longer-
lasting of products freshness [78]. On the other
hand, starch also provides substitution towards
Malaysian oil and gas sector. According to a
study reported by [79], bioethanol extracted
from Sri Kanji 1 cassava starch is way much
cheaper as compared to gasoline fuel. Starch
also helps in enhancing paper coating industry
[80, 81]. Thus, starch is necessary for food,
pharmaceutical, edible film, bioethanol
products and paper coating industry.
Table 2 shows commercially available
starch and its functions reported by previous
studies between 2012 and 2017. Corn, wheat,
potato, tapioca/cassava and rice are among the
most commonly starch available in the market.
Normally starches are added for enhancing
quality of products in food industries. For
example, corn starch helps in increasing fibre
content in cake productions [82]. It also helps
in reducing sponge cake texture as compared
to wheat flour [83]. [84] reported that corn has
been extensively used for syrup production
especially high fructose corn syrup for
industrial needs. Corn is also a good source of
starch for thickening agent in infant formula
[85].
Wheat starch, on the other hand, has been
used in breadfruit cookies formulation [86]. It
was also found to supply gelling properties to
food products [87]. Potato starch was found to
act as a good pasting and gelling agent at the
same time [88]. Potato starch film was also
found be able to be produced from potato
starch [89]. Tapioca/cassava starch was
reported in a previous study to help in risen up
the quality of jasmine rice bread gluten-free
quality [90]. Besides, tapioca starch is also a
good thickening agent in fruit filling
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
148
production such as blueberry filling in a
blueberry cheesecake [91]. In addition, it was
also found to increase the quality of soup
production [92]. Last but not least, rice starch
acts as an emulsion stabiliser [93] and able to
improve gelling properties when added with
hydrocolloids such as sodium
carboxymethylcellulose (CMC) and hydroxyl-
propyl methylcellulose (HPMC) [94].
Table 2 Commercially available starch and functions.
Starch source
Function
Corn
Increased fibre content in cake production [82].
Reduce sponge cake texture as compared to wheat flour [83].
Corn syrup production [84].
Thickener in infant formula [85].
Wheat
Breadfruit cookies formulation [86].
Gelling properties [87].
Potato
Pasting and gelling properties [88].
Production of potato starch film [89].
Tapioca/ Cassava
Increased quality gluten-free jasmine rice bread [90].
Thickener in fruit filling [91].
Enhancing soup product [92].
Rice
Emulsion stabiliser [93].
Improved gel properties with the addition of hydrocolloids [94].
Recent study reported that the knowledge
of pasting properties in starch-based products
is important in order to get required
consistency [95]. Viscosity, gelling,
digestibility and stability of frozen storage of
heated starch suspensions were all depending
on the starch chemical and structural
characteristics together with different origins
and botanical source [96]. Starch is the most
important edible polysaccharide containing
nutritionally high to low molecular weight
sugars [97]. Food industry uses starch as a
thickening, bulking agent, gelling and for
water holding capacity making it as a treasured
factor [98]. Recent study documented that
fully digested starch in small intestine is
known as digestible starch, the incompletely
digested starch in small intestine is known as
partially digested starch, while starch that
totally forbids digestion in small intestine is
known as resistant starch [99]. Table 3 shows
a list of underutilised starch and its functions
documented by previous studies. Underutilised
source of plants remain undiscovered despite
of its contribution to rising of world’s food
production [100].
Food industry favours starch which is
stable, white in colour and odourless thus
making (Araucaria angustifolia) seed as a
perfect candidate by having 34% starch [101].
Recent study claimed that it is crucial to
explore new and underutilised starch as it
offers multiple functions in food and non-food
industry [102]. Hairless Canary Seed (Phalaris
Canariensis L.) and jackfruit seed were
reported to act as a good gel stabiliser [103,
104]. Quinoa, on the other hand, is extremely
stable and widely used in food grade pickering
emulsion stabiliser specifically in (particle-
stabilised emulsion) [105]. Carob is an
excellent source for making gluten-free bread
which suits people that are gluten intolerance
[106]. Sweet potato, on the other hand, has
been widely used in Chinese starch industry
[107]. Another example is Chestnut (Castanea
sativa Mill) which was claimed to have the
same function as corn starch but when
extracted by using low processing temperature
[108]. Pinhão helps in β-carotene
microencapsulation [109]. Jackfruit which is
common to Southeast Asia and India was
found to have seeds that able in increasing
quality of chocolate aroma produced [110] and
for encapsulation process of rice bran oil
[111].
In addition, seeds of these Artocarpus
genus were reported to function well in
gelatinisation properties [112]. Flour was also
one of the most common thing that can be
obtained from jackfruit seed [113]. Thus, the
jackfruit seed flour has ability of producing
reduced calorie chocolate cake [113].
Mangifera Indica kernel, on the other hand,
was documented in two previous studies to
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
149
function well as a coating agent. In the first
study, it was found to coat the almond kernel
[114]. Starch extracted from mango seeds
shows a superficial amount of starch which
can be utilised in industry needing starch
[114]. In the second study has reported that the
mango kernel starch could help in retaining a
longer shelf life of a tomato (Solanum
lycopersicum) fruit [115]. From industrial by-
products, mango kernel can be easily obtained
and produced at low cost [116].
Besides that, soursop (Anona muricata)
starch extracted from its white fleshy flesh has
been used in bread production [117]. Tikhur
(Curcuma angustifolia) was found to be able
in having properties as tapioca sago starch
[118], while moth bean (Vigna Aconotifolia)
was claimed to be having good quality for
food products requiring high thermal stability
[119]. On the other hand, tamarind or in
Malaysia is widely known as ‘asam jawa’ was
reported by recent study that it contains high
swelling power when tested in the range of 55
to 95 °C [120]. The unripe banana was found
to have high ability in forming pasting
properties [121]. Whereas, in another study
comparing cooking banana and dessert banana,
both have claimed to own potential in acting as
an emulsifying agent [122]. Recent study
stated that pea (Pea sativum) and Bambara
groundnut (Vigna subterranea) is an
underutilised food crops in Nigeria and
currently explored of its potential in terms of
starch isolation [123]. Lastly, litchi or is also
known by Malaysian as lychee can be obtained
in fresh form or canned in glucose syrup. Its
kernel starch was reported to have good gel
strength and elasticity [124]. Starch extracted
from underutilised sources has numbers of
unexploited applications. Therefore, it is
important to do further research on potential
source of starch either from indigenous fruits
or botanical source, or it could be from
industrial processing waste such as fruit peels
and seeds.
Table 3 Underutilised starch and functions.
Starch source
Function
Hairless Canary Seed
(Phalaris Canariensis L.)
Gel stabiliser [103, 104].
Quinoa
Food grade pickering emulsions stabiliser
(particle-stabilised emulsions) [105].
Carob
Gluten-free bread production [106].
Sweet potato
Used in Chinese starch industry [107].
Chesnut (Castanea sativa Mill)
Substitute to cornstarch - lower processing temperature [108].
Pinhão
Microencapsulation of β- carotene [109].
Jackfruit seed
Chocolate aroma production [110].
Rice bran oil encapsulation [111].
Gelatinisation purposes [112].
Flour production [113].
Production of reduced calorie chocolate cake [113].
Mango kernel
Coating purpose – almonds (Prunus dulcis) kernels [114].
Edible coating for enhancing shelf- life of tomato (Solanum
lycopersicum) fruit [115].
Composite film production [116].
Soursop (Anona muricata)
Bread production [117].
Tikhur (Curcuma angustifolia)
Mimic properties of Tapioca Sago [118].
Moth bean (Vigna Aconitifolia)
For food products requiring high thermal stability [119].
Tamarind (Tamarindus indica L.)
kernel starch
For food products requiring high swelling power [120].
Banana
For food products requiring high pasting ability [121].
Emulsifying agent [122].
Litchi kernel starch
Good gel strength and elasticity [124].
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
150
3. Starch Modification
Starch is found in an ample amount and
fall into second place compared to other
carbohydrates and by applying some
modification it can fit to various industrial
demands [125]. Starch has broad applications
in food industries. However, starch in native
state is unable to attain specific industrial
requirement. Thus, modifications can be made
either physically or chemically [126]. In order
to improve starch pasting properties and shelf
life extension, modification of starch by using
chemical is the most frequently used method
[127]. Processing quality can be improved by
altering pasting, gelatinizing and
retrogradation properties of starch [128].
Commercialized starch such as corn and other
type of cereals are normally underwent
physical modification or simple chemical
modification to enable them to be used by food
or other industry [129]. Starch was modified
physically or chemically in order to obtain
heat stable or resistance towards heat product,
stable during freeze-thaw process and easily
dissolve either in hot or cold suspension [130].
One of the most common modification
methods by using chemical is crosslinking
[131]. Introducing intra and intermolecular
bonds in starch molecule at random locations
is known as cross-linking [132]. Thermal
properties of starch can also be modified by
applying cross-linking agent and not only
changing physical characteristics however this
is all depending on starch plant origin and
botanical source [133]. Moreover, starch that
has undergone chemical modifications is
extensively used in food industry due to its
better emulsion and pasting characteristics
[134]. Native starch which is modified using
acetylation and oxidation may be used as food
additives [135]. The disadvantages of using
chemical modification are easily causing
chemical residue to be left after modifying
starch and definitely not an eco-friendly even
though it is a fast, simple, extensively used and
efficient method [136].
Chemical modification of starch usually
involves acid or base at high concentration to
destroy hydrogen bond intermolecular
interactions and crystallization areas [137].
Hydroxyl group presence in starch may cause
chemical reaction by exposing one or more
reactive groups on its surface and will be
efficiently coupled to matrix [138]. Modifying
starch by using ether agents resulted in
amphiphilic side chains of product and
hydrophobic character of starch modified
product was fixed by the length of alkenyl
groups [139]. Recent study on using
chemically modified starch in replacing fat in
yogurt based products, suggested a good effect
in syneresis and good flow and better
viscoelastic characteristics [140]. However,
there are two major disadvantages of utilizing
solely pure starch which first is high attraction
towards water and second is extreme rigidity
[141].
Moreover, chemically modified starch will
be susceptible to amylolytic enzymes due to
the presence of chemical substituents and
additional bonds [142]. Maltodextrin is an
example of enzymatically modified starch by
using amylolytic enzymes [143]. An adequate
amount of starch-stearic acid complexes can
be formed by modifying pure starch using few
methods such as acetylation, de-branching and
using enzyme such as β-amylase [144].
Canned and frozen foods required starch with
low viscosity, thus starch modification is
crucial in order to get the required viscosity
[145]. Modification of starch helps in
enhancing industrial application. One of them
is pharmaceutical. Modifying corn, cassava
and sweet potato using acetylation helps in
producing stronger paracetamol which is not
easily crumble during transportation and
storage until reaching consumer [146].
Table 4 and Table 5 show some of the
chemical and physical method for starch
modification done by previous studies. Table 4
shows examples of starch that has been
chemically modified. According to [147],
oxidation produces starch film with the most
stable tensile strength. Cross-linking and
oxidation of starch isolated from elephant foot
yam (Amorphophallus paeoniifolius) help in
improving paste clarity, solubility and thermal
characteristics when tested using DSC without
causing any effect on starch granules [148].
Starch with low paste viscosity is suitable
for production of edible coatings and
biodegradable films [149]. Maleic acid was
used to modify jackfruit seed starch in India to
produce starch with high solubility because
acid tends to break down the amylopectin at
1,6 bonds [150]. On the other hand, ionic
gums were used in a study of modifying water
chestnut (Trapa natans) starch [151].
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
151
Table 4 Chemically modified starch.
Starch source
Modification
Lotus rhizome (Nelumbo nucifera)
Oxidation and cross-linked [149]
Elephant foot yam
(Amorphophallus paeoniifolius)
Oxidation and cross-linked [148].
Jackfruit seeds
(Artocarpus heterophyllus Lam)
Maleic acid [150]
Water chestnut (Trapa natans)
Ionic gums [151]
Tapioca
Acetylation [152]
Acetylation – acetic anhydride [153]
Esterification – Dodecenyl succinic anhydride [154]
Maize
Acetylated (Ac) [156]
Cross-linked [157]
Acha (Digitaria exilis)
Cross-linked with citric acid [158]
Banana (green/unripe)
Hydrochloric acid [159]
Mango kernel (Mangifera indica L.)
Hydrochloric acid [160]
Rice (Oryza sativa L.)
Citric acid, lactic acid and acetic acid [161]
Acetylation – acetic anhydride [162, 163]
Cross linking – citric acid [166]
Sago
Acid hydrolysis and hydroxypropylation [167]
Acetylation – acetic anhydride [168]
Esterification - Octenyl succinic anhydride (OSA) [169]
Durian (Durio zibethinus) seed starch
Acetic acid [170]
Cross-linking [171]
Avocado (Persea americana, Miller)
Acetic acid [172]
Cross-linking [173]
Black eyed pea (Vigna unguiculata)
Acid hydrolysis – Concentrated hydrochloric acid (36%
by weight) [174]
Carioca beans
(Phaseolus vulgaris L.; cv. Pérola)
Oxidation – sodium hypochlorite [175]
White Sorghum (Sorghum bicolor)
Oxidation – sodium hypochlorite [176]
Dual modification – acid hydrolysis and succinylation
[177]
Potato (Solanum tuberosum L.)
Oxidation – sodium hypochlorite [178]
Acetylation and oxidation [179]
Oxidation [180]
Cross-linked with acetic anhydride [181]
Cross-linked with sodium trimetaphosphate (STMP) /
sodium tripolyphosphate (STPP) [183]
Barley (Hordeum vulgare)
Acetylation – sodium hydroxide (NaOH) and oxidation
(active chlorine) [184]
Yellow sorghum
Acetylation, benzylation and hydroxypropylation [185]
Red Zaragoza bean (Phaseoluslunatus)
seeds
Acetylation – acetic anhydride [187]
Pinhão (Araucaria angustifolia) seeds
Acid hydrolysis – hydrochloric acid [188]
Musa AAB (Poovan banana)
Acetylation [190]
Tapioca starch has been used as an
alternative source for products requiring
encapsulation as it comes from inexpensive
source and in this case it helps to slow down
release of crucial bioactive compound such as
chlorogenic acid due to its increasing in
hydrophobicity after acetylation [152].
Chlorogenic acid (5-caffeoylquinic acid,
CGA) was claimed to aid in sliming process
and could be found in a plentiful amount
present in green coffee beans mainly Robusta
species [153].
Acetylation is a chemical modification
process by introducing acetyl groups in starch
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
152
chains and this process can be confirmed by
Fourier transform infrared spectroscopy
(FTIR) [154]. Recent study suggested that by
adding acetyl groups to cassava starch, it
enables to be part of stabiliser in emulsion and
starch gel in frozen food products as it can
function well at low temperature [155].
Besides, maize or corn starch was also
modified using the same acetylated (Ac)
method and cross-linked [156, 157]. Cross-
linking of starch was reported in a study on
acha (Digitaria exilis) starch by introducing
citric acid [158].
Modified unripe banana using
hydrochloric acid does not show any changes
based on its pattern which has been proved by
X-ray diffraction and based on its structure by
scanning electron micrograph [159]. Structure
and shape of starch granule isolated from
mango kernel (Mangifera indica L.) and has
been modified by using acid also do not show
any changes [160].
Rice (Oryza sativa L.) was previously
modified by using three types of organic acids
which are lactic, citric and acetic acid. The
citric acid has the best result in modifying rice
starch as it increases starch solubility [161].
By inserting acetyl groups into native starch, it
will cause amylose and amylopectin to
reassociate its current order and leads to
decreasing in gelatinization temperature. This
is where the process will be beneficial to
industry when acetylation helps in reducing
temperature for starch to gelatinize and will
cut industrial processing cost. Acetylation
causes starch granules in low-amylose rice
starch to breakdown in which producing end
products containing relative stability during
cooking and sensitive to high temperature
[163].
In order to classify starch, there are two
common classifications which are waxy and
non-waxy starches. Waxy starch is made up of
100% amylopectin with low amylose or either
contains no amylose, whereas non-waxy starch
has 20 – 30% amylose and 70% amylopectin.
Rheological and textural properties of waxy
rice products depend on its structure and
gelatinization temperature [164]. Previous
study comparing two rice starch varieties
available in Australia claimed that waxy rice
or commonly known as glutinous rice starch
loses its original shape when heat is applied
due to the presence of air space between the
starch granule. Besides, its endosperm is
whiter and more opaque when compared with
non-glutinous or non-waxy rice [165]. Native
rice starch is extensively used as binding agent
and thickener in sauce production, puddings,
foods for baby and processed meats. However
when modified using cross linking agent such
as citric acid, result obtained showed a better
application of rice starch in food industry as a
dietary fibre [166].
By combining acid hydrolysis and
hydroxypropylation, modified sago starch are
less prone towards retrogradation and even at
high concentration it is still able to solubilise
in cold water [167]. On the other hand, sago
starch in Papua has been modified using acetic
anhydride in acetylation process in order to
improve its thickening properties [168].
Esterification is one of the modifications listed
under chemical modification. Modification of
native sago starch using esterification process
using octenyl succinic anhydride (OSA) cause
it to have potential to be applied as thickener
replacing Arabic gum, emulsifier and oil-water
emulsion stabilizer [169].
Durian seed starch obtained from night
market in Perlis and Kedah, Malaysia was
modified by using acetic acid in realising idea
of using durian waste in order to be an
alternative source of starch replacing current
dependence on petroleum-based plastics [170].
Starch extracted from durian seed not only
applicable for food industry. Recent study
reported that modified starch by cross-linking
from durian seed was found to act as a natural
flocculant in landfill sector as the modification
treatment helps in improving starch
interconnection [171].
Modification of starch by using lactic acid
shows no changes in structure of avocado seed
when analysed by using scanning electron
micrograph (SEM) while it causes reduction in
thermal stability and crystallinity [172]. In a
recent study, modifying avocado seed starch
was done by using cross-linking method
(Persea americana Mill.). Results obtained
suggested that starch isolated from avocado
seed can be an alternative source towards
current available commercial starch source as
it helps in improving paste viscosity and
stability for cream soup production. In
addition, chain of starch is stronger than native
starch due to the presence of phosphate group
gained during cross-linking process [173].
By applying concentrated hydrochloric
acid at 36% by weight, black eyed peas (Vigna
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
153
unguiculata) starch was able to be modified
successfully when it shows an increment in its
solubility, freeze-thaw stability and clarity of
paste [174]. Common bean starch was
modified by oxidation process using sodium
hypochlorite as oxidizing agent. Results
obtained proposed that these modified starch
might be an alternative source in coating food
products and in dairy products. In addition, as
the concentration of oxidizing agent increases,
starch obtained shows whiter in colour which
could be a substitute in paper manufacturing
[175].
Previous study suggested that oxidation
helps in improving solubility and paste clarity
of white sorghum starch and could be an
alternative source for food products requiring
high solid contents without over-thickening
[176]. Reported studies claimed that white
sorghum starch modified by combined acid
hydrolysis and succinylation resulting in lower
paste viscosity, less gumminess and reduced in
tendency towards retrogradation which suits in
food products requiring these properties for
example frozen pie filling, custards and
puddings [177].
Several studies have suggested acetylation
and oxidation mode of modification makes
potato as a potential source of film which can
withstand high water activity in its
surrounding. First study claimed that oxidation
using sodium hypochlorite caused potato
starch to have low water solubility as
compared to its native starch. This study
suggested modified potato starch can be turned
into film and use it in a higher water activity
environment [178].
Oxidation of potato starch as reported in
previous study using oxidizing agent caused
hydroxyl group of starch to transform into
carboxyl or carbonyl group which could be
one of the reason increasing in hydrophobicity
of modified potato starch [179]. Second study
reported potato starch modified using
acetylation shows greater reduction in water
vapour absorbing capability as compared to
modification using oxidation process [180].
Potato starch properties were reported unable
to modify most efficient at temperature of
25°C or lower when using acid hydrolysis
[181].
On the other hand, cross-linking suggested
different methods of modification in potato
starch. Present hydrogen bonds in potato
starch will be strengthen during cross-linking
using cross-linking agent for example acetic
anhydride which in turns resulting in starch
product that has high resistant towards heat,
acid and increase in shearing properties as
compared to native and unmodified starch
[182]. Another study reported modifying
potato starch using sodium trimetaphosphate
(STMP) or sodium tripolyphosphate (STPP) as
its cross-linking agent resulted in modified
starch having desired properties to be applied
in food industry such as binding agent,
stabilizer and thickener [183].
Previous study found that by inserting
acetyl group through acetylation and addition
of carbonyl and carboxyl group by oxidation
makes barley starch decreasing in its viscosity
and in turns reducing possibility to retrograde
which could be a potential source in making
biodegradable films [184]. Yellow sorghum
starch was subjected to acetylation,
benzylation and hydroxypropylation resulting
in food product having low tendency towards
retrogradation which could be a good
alternative source in sauces and bread
production [185].
During heating of starch in excess
availability of water, starch takes up water and
swelling occur inside the granule. In this
condition, amylose and amylopectin disappear.
This is called as gelatinization process. When
heating stops, amylose starts to form back and
in a longer term amylopectin will follow the
same condition. This is known as
retrogradation [186]. Increasing degree of
acetylation in zaragoza (Phaseoluslunatus)
bean seeds starch obtained from Colombia
resulting in a good alternative source in cream
manufacturing due to high viscosity level
[187].
Modification of pinhão seed starch using
hydrochloric acid shows end result having
better solubility and more transparent which
could be an alternative source in coating
materials or film [188]. What is actually
happening during hydrolysis of acid is acid for
example hydrochloric acid was added to the
suspension of starch in aqueous condition and
controlled at certain desired temperature below
gelatinization temperature for a fixed period of
time [189]. Results obtained from this study
reported that pasting properties of poovan
banana from India rises after acetylation
process compared to its native form [190].
Table 5 shows several examples on
physically modified starch. Altering starch
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
154
granules and molecular structure is practiced
in physical modification of starch in order to
obtain a stabilize starch granules, decreasing in
retrogradation and enhancing in paste and gel
properties when in use [191].
Table 5 Physically modified starch
Starch source
Modification
Corn
Ultrasound treatment [211]
Heat moisture treatment [212]
Pinhão (Araucaria angustifolia)
seeds
Annealing, heat-moisture, sonication [214]
Ultrasound treatment [215]
Heat moisture treatment [217]
Potato
Ultrasonic treatment [218, 219, 220]
Annealing and ultra - high pressure (UHP) [221]
Rice
Annealing [222]
Heat-moisture treatment [223]
Improved Extrusion Cooking Technology (IECT) [224]
Parboiling – steeping step [225]
Ultrasound treatment [226]
Sweet Potato
Annealing [227]
Heat-moisture treatment [239]
Repeated heat moisture treatment (RHMT) [228]
Steam explosion [229]
Wheat
Annealing and ultra - high pressure (UHP) [230]
Ultrasound treatment [231]
Yam (Dioscorea spp.)
Annealing [229]
Annealing and ultra - high pressure (UHP) [229]
Heat moisture treatment [232]
Jackfruit seed
Microwave [233]
Partial gelatinization [234]
Foxtail millet
Heat moisture treatment [235]
Ultrasound treatment (UT) [236]
Sago
Heat moisture treatment [238]
Red adzuki beans
Continuous and repetition heat moisture treatment [240]
Taro
Microwave and heat moisture treatment [241]
Water chestnut
Microwave [242]
Acorn
Annealing and heat moisture treatment [243]
Lotus (Nelumbo nucifera Gaertn)
seed
Microwave [248]
Tapioca
Ball – milling [249]
Bambara groundnut (Vigna
subterranea)
Annealing [254]
Ensete/False banana
(Ensete ventricosum Musaceae)
Annealing and heat moisture treatment [255]
Morado banana
Heat moisture treatment [256]
Banana (Musa sapietum and Musa
paradisiaca)
Heat moisture treatment [258]
White Sorghum
(Sorghum bicolor)
Annealing [259]
Arrowroot
(Marantha arundinacea L)
Autoclave – cooling treatment [260]
Heat moisture treatment (HMT) helps in
improving elasticity of dough made from
wheat and barley flour [192]. Besides HMT,
ultrasound is another method commonly used
to modify starch physically. Recent study
reported that ultrasound is gaining recognition
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
155
due to its various benefits such as low cost,
efficient and eco- friendly as no chemical
usage involved as compared to other chemical
modification method [193]. According to
[194], larger bubbles can be formed if lower
frequency of ultrasound used and cavitation
process that occur during ultrasound causing
both covalent and non- covalent bond inside
polymer such as starch to be broken down. By
applying ultrasound, starch component present
in plant polymer can be modified physically
[195].
If modifying starch by using either fully or
partially gelatinization, it will be able to
produce starch with cold water-swelling
capacity and gel barrier properties [196]. Rice
(Oryza Sativa L.) being the major nutrient and
calories source of Asian people was found by
recent study in reducing its glycaemic index
by applying heat moisture treatment and
annealing [197]. The usage of modified starch
among them is to increase viscosity, shelf life
of food products, textures, solubility,
appearance and emulsification of food
products [198]. Annealing is categorised under
hydrothermal modification method of starch
other than HMT. The process of annealing
includes starch nurtured in an excess amount
of water in a temperature range below
gelatinisation temperature but higher than
temperature of glass transition [199].
Starch has been modified in order to gain a
better surface area and increase in pore volume
due to its huge presence worldwide at low cost
[200]. Moreover, according to [201], varieties
of indigenous corn starches from different
botanical sources have been well studied and
reported by previous researchers regarding its
physicochemical characteristics. Recent study
reported that modified starch able to replace
current available dietary fat [201]. Human
beings and animals with simple single-
chambered stomach like cats, rats and pigs
unable to digest native starch granules well
[202]. When comparing between maltodextrin,
native and modified tapioca starch, it was
found that modified tapioca starch had a
broader distribution of particle size [203].
Three most common function of modified
starch in food industry are as agent of gelling,
stabilising and thickening [204]. According to
[205] starch-modified physically for example
using the most common treatment such as
heat-moisture treatment and annealing can
produce a safe raw material. On the other
hand, starch modified by using the chemical
for example sodium hypochlorite (NaOCl)
produced end products that have high
viscosity, stronger resistance to acid, heat, and
shear, swelling decreases and not easily
breakdown [206]. Starch paste properties can
be easily modified expressively by applying
several cross-links [207].
When people consuming starchy foods for
example bread and rice, main supply of energy
was actually supplied by physical and
chemical properties of starch that act as main
source of carbohydrate [208]. Increasing the
starch paste stability and reducing pH, heat
and shear properties of tapioca starch during
food processing is the main focus of
modifying starch by food scientist in Thailand
[209]. As an example, by undergo dual
modification process, sorghum starch was
reported to be a new potential source replacing
current available biodegradable films [210].
Corn starch was reported successfully
modified by applying ultrasound treatment
[211]. Pre-treated samples with ultrasound
treatment helps in altering corn starch
physicochemical properties [212]. In another
study, corn starch was modified using heat
moisture treatment and resulted in reduction of
swelling power, percent solubility,
gelatinization enthalpy and pasting viscosities
when compared with untreated corn starch
samples [213].
Pinhão (Araucaria angustifolia) which
could be found in Brazil and was reported to
be in high starch content and can be modified
physically using process of annealing, heat-
moisture treatment and sonication [214].
Physically modified pinhão seed shows better
results in terms of syneresis whereas other
parameters show no significant difference as
compared to its native starch [215]. Pinhão
seed obtained from pines trees that grow well
in forests Southern part of Latin America and
when applying HMT, molecular structure and
its properties changes which suggested that it
could be utilised as it is an underutilised
source of starch and apply in food and non –
food based application [216]. HMT is an
example of physical modification which
reported in previous study on pinhão seeds can
provide strongest effect towards gelatinization
and enthalpy if tested using differential
scanning calorimeter machine [217].
Potato was also modified by using
ultrasound treatment [218, 219, 220]. Basically
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
156
ultrasound is a sound waves having a
frequency which beyond human hearing
capability [221]. On the other hand, for rice
starch, several methods have been reported by
previous studies. Annealing [222], HMT
[223], improved extrusion cooking technology
(IECT) [224] and ultrasound treatment [225].
Steeping is the first step in parboiling process
followed by heating and drying of rice. Recent
study reported that starch isolated from rice
kernels is different from kernel itself in terms
of its structure and properties [226]. Recent
study suggested starch extracted from sweet
potato modified by using steam explosion can
be a good source for treating diabetic patients
by encapsulating this starch into the medicine
[227]. Sweet potatoes were claimed by
previous research on applying annealing [228]
and HMT [229].
Recent study claimed that by annealing
wheat starch, stability increases as the
interaction between the starch chains
increases. Combining both method of
annealing and HMT modification causes
starch granules structure in yam and potato
starches to change [231]. Yam (Dioscorea
spp.) starch was physically modified by
annealing process [229]. Annealing or also
recognized as tempering has caused a rising in
pasting temperature, peak time, setback and
final viscosities of yam starch as compared to
modification using acid hydrolysis, results
obtained is vice versa [232].
Recent study in Vietnam had partially
gelatinized jackfruit seed starch as a
modification procedure and results showing
highly soft and elastic starch gel [233].
Modification of starch by using microwave
was found to be more efficient and time saving
compared to modification by using acid in a
study using starch isolated from jackfruit seed
in India [234].
Previous study reported that by applying
physical modification such as hydrothermal
treatment, modified starch obtained will be
more viscous, transparent, stable and swelling
power will also increase when compared with
native starch. In addition, this process is
known as pre-gelatinisation which could be the
initial step crucial before chemical
modification [235]. Foxtail millet starch in
previous study was reported can be modified
by using HMT and ultrasound treatment (UT).
Heat moisture treatment is an interesting and
alternative way of modifying starch physico-
chemical properties without disturbing starch
structure of molecule [236]. Heat moisture
treatment when combined with citric acid
shows changes in sweet potato starch
crystallinity type from B to C and reduced its
peak viscosity which shows that by applying
such treatment, a significant change can be
observed. Besides, another study reported
starch isolated from sweet potato starch were
successfully modified using repeated heat
moisture treatment (RHMT) when a
significant changes were observed on X-ray
diffraction pattern and its crystallinity, thermal
and pasting properties when compared with
native starch [237].
Better noodles in terms of elasticity and
firmness were detected in noodles made up
from sago starch that has undergone heat
moisture treatment [238]. In addition, another
study also claimed that HMT caused reduction
in sweet potato starch viscosity but shows
rising in swelling power and solubility as
compared to native or modified starch using
annealing process [239]. Reduction paste
viscosities properties, swelling power and
solubility is supported by another study using
continuous and repeated heat moisture
treatment towards red adzuki beans starch in
Yangling, China [240].
Taro starch was modified using dual
modification of microwave and HMT shows
better results in terms of viscosity and freeze-
thaw stability as compared to native taro starch
[241]. By applying microwave heating, starch
extracted from water chestnut shows
increasing in pasting properties and enthalpy
values. However, the swelling power and
percent solubility decreases [242]. Main
reason of utilising modified starch in food
industry is due to its ability in rapidly
dissolves in cold water [242].
Acorn is the fruits gained from oak tree
categorised under genus Quercus, which has
been modified by using annealing and HMT.
The HMT gave more significant result in
terms of altering starch properties compared to
annealing [243]. Previous study stated that
amylose and amylopectin are the main
component of acorn starch though amylopectin
composition was found higher than amylose
[244]. In a study producing gluten free bread
from acorn flour, substitution at 20% shows
the most significant impact on volume of
bread and its physical characteristics.
However, beyond these 20% addition of acorn
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
157
flour will reduce bread volume. In conjunction
with previous statement, carbon dioxide
presence in gluten network formation inside
bread dough has been reduced due to gluten
network deficiency which in turns resulting in
bread with lowers loaf volume [245].
Recent study claimed that lotus is
normally found in a dried form rather than
fresh form due to its short life span in fresh
condition which contributes by enzymatic
browning, microbial growth and deterioration
of quality [246]. Lotus seed starch (Nelumbo
nucifera Gaertn) has been modified using
microwave heating, which resulted in
increment of its crytallinity, volume of pore
and surface area, whereas yield of extraction
and average size of starch particle decreases
[247]. Another study reported using
microwave radiation on lotus seed starch helps
in producing starch with low glycaemic and
hydrolysis index due to increasing in number
of resistant and slowly digestible starch by
amplifying microwave radiation [248].
In this study, three methods of tapioca
starch modification has been combined which
are through enzymatic, acid hydrolysis and
physical modification using ball milling as it
was claimed to change structure of starch from
its native condition to smaller size of starch
granule [249]. Tapioca starch in paste form
contains no odour, high in paste clarity and
stickiness make it extensively used in food and
non-food industry in Thailand. However, like
other starch in native condition, tapioca starch
unable to perform well in industry as it
produces unwanted characteristic of gel with
weak structure, cannot withstand shear forces
and reduction in stability of viscosity when
heat applied [250].
In order to have a better quality of starch
based product, many of starch source have
different degree of gelatinization so it can fit
many food formulations depending on product
needs [251]. Recent study found that by
adding physically modified starch to yogurt
based product containing skimmed milk
powder, it enhances consumer acceptance and
yogurt become creamier and having consistent
texture compared to non-added starch based
yogurt [252]. Modification of native starch
will not only result in reduction of
retrogradation occurrence but will also benefit
in many ways. For example, paste of modified
starch will be more stable during cooling and
freezing process, less prone towards formation
of gel, less opaque and enriches gel texture
[253].
Modification of Bambara groundnut
(Vigna subterranea), an underutilised starch
source from Nigeria using annealing process
reported to have caused cracks and pores on
starch surface based on image obtained from
SEM [254]. In a study of modifying starch
using both hydrothermal treatment which are
annealing and HMT, results obtained showed
false banana (Ensete ventricosum Musaceae)
starch could be possibly used as functional
ingredients in both food and pharmaceuticals
industry [255]. In a study of modifying
Morado banana starch using HMT, results
gained indicated that it a good method of
producing starch which could fit industrial
needs in terms of added value product [256].
HMT was able to change the diffraction
patterns based on X-ray diffraction results on
two types of banana starch (Musa sapietum
and Musa paradisiaca) in Nigeria from B to C
type [257]. Recent study claimed that
annealing is a greener way of modifying
desired properties of starch and enhance final
product quality [258]. White sorghum
(Sorghum bicolor) starch was subjected to
annealing in a reported study shown increasing
in paste clarity. Thus, it could be a functional
additive in a food product requiring starch
with high clarity [259].
Arrowroot is popular among Indonesian as
it is one of the carbohydrate sources and
scientifically known as (Marantha
arundinacea L) has been modified using
autoclave and cooling treatment. Gel produced
from physically modified arrowroot showed a
softer texture and less rigid [260]. Annealing,
HMT, ultrasound and sonication are widely
used in physical modification of starch.
However, there are also other methods to
modify such physically such as parboiling, ball
milling, microwave and gelatinization.
Therefore, there are varieties of choices to
modify starch physically.
Conclusion
In conclusion, starches are widely used in
food industries. Thus, modifying starch to
fulfill specific industrial needs can be done
either using chemical or physical treatment.
Numbers of starch in the future should be
produced from unexplored source with further
studies done. This is because rather than to
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
158
reduce the waste, it is cheaper and easily
available source. The underutilised starch
should be transformed into a more useful
product for future use.
Acknowledgements
Authors are thankful to Universiti Tun Hussein
Onn Malaysia for providing research facilities
and financial support through Centre for
Graduate Studies, Short-Term Grant (UTHM-
STG-U538-2016), and Postgraduate Research
Grant (UTHM-GPPS-U813-2017).
References
[1] Wang, S., Li, C., Zhang, X., Copeland,
L. & Wang, S. (2016). “Retrogradation
Enthalpy Does Not Always Reflect the
Retrogradation Behaviour of Gelatinized
Starch” in Scientific Reports.
[2] Przetaczek-Rożnowska, I. (2017).
“Physicochemical Properties of Starches
Isolated from Pumpkin Compared with
Potato and Corn Starches” International
Journal of Biological Macromolecules,
Vol. 101 pp. 536-542.
[3] Marvizadeha, M.M.,
Oladzadabbasabadi, N., Nafchi, M.A. &
Jokar, M. (2017). “Preparation and
Characterization of Bionanocomposite
Film Based on Tapioca Starch/Bovine
Gelatin/Nanorod Zinc Oxide” in
International Journal of Biological
Macromolecules, Vol. 99 pp. 1-7.
[4] de Oliveira, C.S., Andrade, M.M.P.,
Colman, T.A.D., da Costa, F.J.O.G. &
Schnitzler, E. (2014). “Thermal,
Structural and Rheological Behaviour of
Native and Modified Waxy Corn Starch
with Hydrochloric Acid at Different
Temperatures” in Journal of Thermal
Analysis and Calorimetry, Vol. 115. No.
1 pp. 13-18.
[5] Xie, X.S. & Liu, Q. (2004).
“Development and Physicochemical
Characterization of New Resistant
Citrate Starch from Different Corn
Starches” in Starch - Stärke, Vol. 56.
No. 8 pp. 364-370.
[6] Santoso, B. (2018). “Recovery of Starch
From Sago Pith Waste and Waste Water
Treatment , Sago Palm” in Springer, pp.
261-269.
[7] Naz, M.Y., Sulaiman, S.A., Ariwahjoedi
B. & Shaari, K.Z.K. (2014).
“Characterization of Modified Tapioca
Starch Solutions and Their Sprays for
High Temperature Coating
Applications” in The Scientific World
Journal.
[8] Horstmann, S.W., Belz, M.C.E.,
Heitmann, M. Zannini, E. & Arendt,
E.K. (2016). “Fundamental Study on
The Impact of Gluten-Free Starches on
The Quality of Gluten-Free Model
Breads” in Foods, Vol. 5. No. 2 pp. 30.
[9] Djurle, S., Andersson, A.A.M. &
Andersson, R. (2018). “Effects of
Baking on Dietary Fibre, with Emphasis
on β-Glucan and Resistant Starch, in
Barley Breads” in Journal of Cereal
Science, Vol. 79 pp. 449-455.
[10] Yu, W., Tan, X., Zou, W., Hu, Z., Fox,
G.P., Gidley, M.J. & Gilbert, R.G.
(2017). “Relationships Between Protein
Content, Starch Molecular Structure and
Grain Size in Barley” in Carbohydrate
Polymers, Vol. 155 pp. 271-279.
[11] Yu, W., Zou, W., Dhital, S., Wu, P.,
Gidley, M.J., Fox, G.P. and Gilbert, R.
G. (2018). “The Adsorption of α-
Amylase on Barley Proteins Affects The
In Vitro Digestion of Starch in Barley
Flour” in Food Chemistry, Vol. 241 pp.
493-501.
[12] Gujral, H.S., Sharma, B. & Khatri, M.
(2018) “Influence of Replacing Wheat
Bran with Barley Bran on Dough
Rheology, Digestibility and
Retrogradation Behavior of Chapatti”
Food Chemistry, Vol. 240 pp. 1154-
1160.
[13] Yangcheng, H., Gong, L., Zhang, Y. &
Jane, J.l. (2016). “Physicochemical
Properties of Tibetan Hull-Less Barley
Starch” in Carbohydrate Polymers, Vol.
137 pp. 525-531.
[14] Källman, A., Vamadevan, V., Bertoft,
E., Koch, K., Seetharaman, K., Åman, P.
& Andersson, R. (2015). “Thermal
Properties of Barley Starch and Its
Relation to Starch Characteristics” in
International Journal of Biological
Macromolecules, Vol. 81 pp. 692-700.
[15] Cuesta-Seijo, J. A., Nielsen, M.M.,
Ruzanski, C., Krucewicz, K., Beeren,
S.R., Rydhal, M.G., Yoshimura, Y.,
Striebeck, A., Motawia, M.S., Willats,
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
159
W.G.T. & Palcic.,M.M. (2016). “In
Vitro Biochemical Characterization of
All Barley Endosperm Starch
Synthases” in Frontiers in Plant
Science, Vol. 6 pp. 1265.
[16] Ali, A., Wani, T.A., Wani, I.A. &
Masoodi, F.A. (2016). “Comparative
Study of The Physico-Chemical
Properties of Rice and Corn Starches
Grown in Indian Temperate Climate” in
Journal of the Saudi Society of
Agricultural Sciences, Vol. 15. No. 1 pp.
75-82.
[17] Alimi, B.A., Workneh, T.S. &
Oyeyinka, S.A. (2017). “Structural,
Rheological and In-Vitro Digestibility
Properties of Composite Corn-Banana
Starch Custard Paste” in LWT-Food
Science and Technology, Vol. 79 pp. 84-
91.
[18] de Oliveira, C.S., Andrade, M.M.P.,
Colman, T.A.D., da Costa, F.J.O.G. &
Schnitzler, E. (2014). “Thermal,
Structural and Rheological Behaviour of
Native and Modified Waxy Corn Starch
with Hydrochloric Acid at Different
Temperatures” in Journal of Thermal
Analysis and Calorimetry, Vol. 115. No.
1 pp. 13-18.
[19] Lee, S.J., Lee, H.S., Kim, S.Y. & Shin,
K.-S. (2018). “Immunostimulatory and
Anti-Metastatic Activity of
Polysaccharides Isolated from by
Products of The Corn Starch Industry”
in Carbohydrate Polymers, Vol. 181 pp.
911-917.
[20] Luo, G., Xu, W., Yang, J., Li, Y.,
Zhang, L., Wang, Y., Lin, C. & Zhang,
Y. (2017). “Effects of Ruminally
Degradable Starch Levels on
Performance, Nitrogen Balance, and
Nutrient Digestibility in Dairy Cows Fed
Low Corn-Based Starch Diets” in Asian-
Australasian Journal of Animal
Sciences, Vol. 30. No. 5 pp. 653.
[21] Majzoobi, M., Hedayati, S., Habibi, M.,
Ghiasi, F. & Farahnaky, A. (2014).
“Effects of Corn Resistant Starch on The
Physicochemical Properties of Cake” in
Journal of Agricultural Science and
Technology (JAST), Vol. 16. No. 3 pp.
569 – 576.
[22] Klaochanpong, N., Puttanlek, C.,
Rungsardthong, V., Puncha-arnon, S. &
Uttapap, D. (2015). “Physicochemical
and Structural Properties of Debranched
Waxy Rice, Waxy Corn and Waxy
Potato Starches” in Food Hydrocolloids,
Vol. 45 pp. 218-226.
[23] Lu, Y., Luthria, D., Fuerst, E.P.,
Kiszonas, A.M., Yu, L. & Morris, C.F.
(2014). “Effect of Processing on
Phenolic Composition of Dough and
Bread Fractions Made from Refined and
Whole Wheat Flour of Three Wheat
Varieties” in Journal of Agricultural and
Food Chemistry, Vol. 62. No. 43
pp.10431-10436.
[24] Zhou, Q., Li, X., Yang, J., Zhou, L., Cai,
J., Wang, X., Dai, T., Cao, W. and Jiang,
D. (2018). “Spatial Distribution Patterns
of Protein and Starch in Wheat Grain
Affect Baking Quality of Bread and
Biscuit” in Journal of Cereal Science,
Vol. 79 pp. 362-369.
[25] Wang, X., Appels, R., Zhang, X.,
Diepeveen, D., Torok, K., Tomoskozi,
S., Bekes, F., Ma, W., Sharp, P. &
Islam, S. (2017). “Protein Interactions
During Flour Mixing Using Wheat Flour
with Altered Starch” in Food Chemistry,
Vol. 231 pp. 247-257.
[26] López-Barón, N., Gu, Y., Vasanthan, T.
& Hoover, R. (2017). “Plant Proteins
Mitigate In Vitro Wheat Starch
Digestibility” in Food Hydrocolloids,
Vol. 69 pp. 19-27.
[27] Fleischman, E.F., Kowalski, R.J.,
Morris, C.F., Nguyen, T., Li, C.,
Ganjyal, G. & Ross, C.F. (2016).
“Physical, Textural and Antioxidant
Properties of Extruded Waxy Wheat
Flour Snack Supplemented with Several
Varieties of Bran” in Journal of Food
Science, Vol. 81. No. 11 pp. 1-8.
[28] Spooner, D.M., Ghislain, M., Simon, R.,
Jansky, S.H. & Gavrilenko, T. (2014).
“Systematics, Diversity, Genetics, and
Evolution of Wild and Cultivated
Potatoes” in The Botanical Review, Vol.
80. No. 4 pp. 283-383.
[29] Jiang, S., Liu, C., Wang, X., Xiong, L.
& Sun, Q. (2016). “Physicochemical
Properties of Starch Nanocomposite
Films Enhanced by Self-Assembled
Potato Starch Nanoparticles” in LWT-
Food Science and Technology, Vol. 69
pp. 251-257.
[30] Charles, A.L., Cato, K., Huang, T.-C.,
Chang, Y.-H., Ciou, J.-Y., Chang, J.-S.
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
160
and Lin, H.-H. (2016). “Functional
Properties of Arrowroot Starch in
Cassava and Sweet Potato Composite
Starches” in Food Hydrocolloids, Vol.
53 pp. 187-191.
[31] Kim, H.-Y., Oh, S.-M., Bae, J.-E.,
Yeom, J.-H., Kim, B.-Y., Kim, H.-S. &
Baik, M.-Y. (2017). “Preparation and
Characterization of Amorphous
Granular Potato Starches (AGPS) and
Cross-Linked Amorphous Granular
Potato Starches (CLAGPS)” in
Carbohydrate Polymers, Vol. 178 pp.
41-47.
[32] Daudt, R.M., Külkamp-Guerreiro, I. C.,
Cladera-Olivera, F., Thys, R.C.S. &
Marczak, L.D.F. (2014). “Determination
of Properties of Pinhão Starch: Analysis
of Its Applicability as Pharmaceutical
Excipient” in Industrial Crops and
Products, Vol. 520 pp. 420-429.
[33] Van Hung, P., Huong, N.T.M., Phi,
N.T.L. & Tien, N.N.T. (2017).
“Physicochemical Characteristics and In
Vitro Digestibility of Potato and
Cassava Starches Under Organic Acid
and Heat-Moisture Treatments” in
International Journal of Biological
Macromolecules, Vol. 95 pp. 299-305.
[34] Lee, S., Lee, J.H. & Chung, H.-J.
(2017). “Impact of Diverse Cultivars on
Molecular and Crystalline Structures of
Rice Starch for Food Processing” in
Carbohydrate Polymers, Vol. 169 pp.
33-40.
[35] Girsang, W. (2018). “Feasibility Of
Small-Scale Sago Industries in The
Maluku Islands, Indonesia. Sago Palm”
in Springer, pp. 109-121.
[36] Precha-Atsawanan, S., Puncha-arnon, S.,
Wandee, Y., Uttapap, D., Puttanlek, C.
& Rungsardthong, V. (2018).
“Physicochemical Properties of Partially
Debranched Waxy Rice Starch” in Food
Hydrocolloids, Vol. 79 pp. 71 - 80.
[37] Moin, A., Ali, T.M. & Hasnain, A.
(2017). “Characterization and Utilization
of Hydroxypropylated Rice Starches for
Improving Textural and Storage
Properties of Rice Puddings” in
International Journal of Biological
Macromolecules, Vol. 105 pp. 843-851.
[38] Kathiravan, V., Saranya, S., Kumar,
K.S.V. & Rajasekar, D.D. (2017).
“Economics of Processing of Different
Tapioca Based Products in Salem
District of Tamil Nadu, India” in Int. J.
Curr. Microbiol. App. Sci, Vol. 6. No.11
pp. 1613-1619.
[39] Ogunmuyiwa, O.H., Adebowale, A.A.,
Sobukola, O.P., Onabanjo, O.O.,
Obadina, A.O., Adegunwa, M.O.,
Kajihausa, O.E., Sanni, L.O. & Keith, T.
(2017). “Production and Quality
Evaluation of Extruded Snack from
Blends of Bambara Groundnut Flour,
Cassava Starch, and Corn Bran Flour” in
Journal of Food Processing and
Preservation, pp. 1-11.
[40] Alvarado, P.M., Grosmaire, L., Dufour,
D., Toro, A.G., Sánchez, T., Calle, F.,
Santander, M.A.M., Ceballos, H.,
Delarbre, J.L. & Tran, T. (2013).
“Combined Effect of Fermentation, Sun-
Drying and Genotype on Breadmaking
Ability of Sour Cassava Starch” in
Carbohydrate Polymers, Vol. 98. No.1
pp. 1137-1146.
[41] Chuang, L., Panyoyai, N., Shanks, R.A.
& Kasapis, S. (2017). “Effect of Salt on
The Glass Transition of Condensed
Tapioca Starch Systems” in Food
Chemistry, Vol. 229 pp. 120-126.
[42] Singh, A., Geveke, D.J., & Yadav, M.P.
(2017). “Improvement of Rheological,
Thermal and Functional Properties of
Tapioca Starch by Using Gum Arabic”
in LWT-Food Science and Technology,
Vol. 80 pp. 155-162.
[43] Trinh, K.S. & Du Le, H. (2017).
“Tapioca Resistant Starch Production
and Its Structural Properties Under
Annealing and Plasma Treatments” in
Carpathian Journal of Food Science and
Technology, Vol. 9. No. 1 pp. 36 – 42.
[44] Pfister, B. & Zeeman, S.C. (2016).
“Formation of Starch in Plant Cells” in
Cellular and Molecular Life Sciences,
Vol. 73. No. 14 pp. 2781-2807.
[45] Lozano-Navarro, J.I., Díaz-Zavala, N.P.,
Velasco-Santos, C., Melo-Banda, J.A.,
Páramo-García, U., Paraguay-Delgado,
F., García-Alamilla, R., Martínez-
Hernández, A.L. & Zapién-Castillo, S.
(2018). “Chitosan-Starch Films with
Natural Extracts: Physical, Chemical,
Morphological and Thermal Properties”
in Materials, Vol.11. No. 1 pp. 120.
[46] Martinez-Garcia, M., Kormpa, A. & Van
der Maarel, M.J. (2017). “The Glycogen
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
161
of Galdieria Sulphuraria as Alternative
to Starch for The Production of Slowly
Digestible and Resistant Glucose
Polymers” in Carbohydrate Polymers,
Vol. 169 pp. 75-82.
[47] Li, Y., Ren, J., Liu, J., Sun, L., Wang,
Y., Liu, B., Li, C. & Li, Z. (2018).
“Modification by α-D-Glucan Branching
Enzyme Lowers The In Vitro
Digestibility of Starch From Different
Sources” in International Journal of
Biological Macromolecules, Vol. 107
pp. 1758-1764.
[48] Lehoczki, G., Kandra, L. & Gyémánt, G.
(2018). “The Use of Starch Azure for
Measurement of Alpha-Amylase
Activity” in Carbohydrate Polymers,
Vol. 183 pp. 263-266.
[49] Syahariza, Z., Sar, S., Hasjim, J.,
Tizzotti, M.J. & Gilbert, R.G. (2013).
“The Importance of Amylose and
Amylopectin Fine Structures for Starch
Digestibility in Cooked Rice Grains” in
Food Chemistry, Vol. 136. No. 2 pp.
742-749.
[50] Ahmed, Z., Tetlow, I.J. Falk, D.E., Liu,
Q. & Emes, M.J. (2016). “Resistant
Starch Content is Related to Granule
Size in Barley” in Cereal Chemistry,
Vol. 93. No. 6 pp. 618-630.
[51] Schwall, G.P., Safford, R., Westcott,
R.J., Jeffcoat, R.A., Tayal, S., Yong-
Cheng, Gidley, M.J. & Jobling, S.A.
(2000). “Production of Very-High-
Amylose Potato Starch by Inhibition of
SBE A and B” in Nature Biotechnology,
Vol. 18. No. 5 pp. 551.
[52] Chen, P., Liu, X., Zhang, X., Sangwan,
P. & Yu, L. (2015). “Phase Transition of
Waxy and Normal Wheat Starch
Granules During Gelatinization” in
International Journal of Polymer
Science,
http://dx.doi.org/10.1155/2015/397128
[53] Whitney, K., Reuhs, B.L., Martinez
M.O. & Simsek, S. (2016). “Analysis Of
Octenylsuccinate Rice and Tapioca
Starches: Distribution of
Octenylsuccinic Anhydride Groups in
Starch Granules” in Food Chemistry,
Vol. 211 pp. 608-615.
[54] Banura, S., Thirumdas, R., Kaur, A.,
Deshmukh, R. & Annapure, U. (2018).
“Modification of Starch using Low
Pressure Radio Frequency Air Plasma”
in LWT, Vol. 89 pp. 719-724.
[55] McMaugh, S.J., Thistleton, J.L.,
Anschaw, E., Luo, J., Konik-Rose, C.,
Wang, H., Huang, M., Larroque, O.,
Regina, A. & Jobling, S.A. (2014).
“Suppression of Starch Synthase I
Expression Affects The Granule
Morphology and Granule Size and Fine
Structure of Starch in Wheat
Endosperm” in Journal of Experimental
Botany, Vol. 65. No. 8 pp. 2189-2201.
[56] Vanier, N.L., Vamadevan, V., Bruni,
G.P., Ferreira, C.D., Pinto, V.Z.,
Seetharaman, K., Zavareze, E.d.R.,
Elias, M.C. & Berrios, J.D.J. (2016).
“Extrusion of Rice, Bean and Corn
Starches: Extrudate Structure and
Molecular Changes in Amylose and
Amylopectin” in Journal of Food
Science, Vol. 81. No. 12 pp. 1 – 7.
[57] Pan, T., Lin, L., Wang, J., Liu, Q. &
Wei, C. (2018). “Long Branch-Chains of
Amylopectin with B-Type Crystallinity
in Rice Seed with Inhibition of Starch
Branching Enzyme I and IIb Resist In
Situ Degradation and Inhibit Plant
Growth during Seedling Development”
in BMC Plant Biology, Vol. 18. No. 1
pp. 9.
[58] Miao, M., Li, R. Jiang, B. Cui, S.W.,
Zhang, T. & Jin, Z. (2014). “Structure
and Physicochemical Properties of
Octenyl Succinic Esters of Sugary
Maize Soluble Starch and Waxy Maize
Starch” in Food Chemistry, Vol. 151 pp.
154-160.
[59] Wang, B., Ma, M., Lu, H., Meng, Q., Li,
G. & Yang, X. (2015). “Photosynthesis,
Sucrose Metabolism, and Starch
Accumulation in Two NILs of Winter
Wheat” in Photosynthesis Research,
Vol. 126. No. 2-3 pp. 363-373.
[60] Oboh, G., Ademosun, A.O., Akinleye,
M.O., Omojokun, S., Boligon, A.A. &
Athayde, M.L. (2015). “Starch
Composition, Glycemic Indices,
Phenolic Constituents, and Antioxidative
and Antidiabetic Properties of Some
Common Tropical Fruits” in Journal of
Ethnic Foods, Vol. 2. No. 2 pp. 64-73.
[61] Bismark, S., Zhifeng, Z. & Benjamin, T.
(2018). “Effects of Differential Degree
of Chemical Modification on the
Properties of Modified Starches: Sizing”
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
162
in The Journal of Adhesion, Vol. 94. No.
2 pp. 97-123.
[62] Wu, T.-Y., Sun, N.-N. & Chau, C.-F.
(2018). “Application of Corona
Electrical Discharge Plasma on
Modifying The Physicochemical
Properties of Banana Starch Indigenous
to Taiwan” in Journal of Food and Drug
Analysis, Vol. 26. No. 1 pp. 244-251.
[63] Santoso, B. (2018). “Recovery of Starch
from Sago Pith Waste and Waste Water
Treatment, Sago Palm” in Springer, pp.
261-269.
[64] Soong, Y.Y., Quek, R.Y.C. & Henry,
C.J. (2015). “Glycemic Potency of
Muffins Made with Wheat, Rice, Corn,
Oat and Barley Flours: A Comparative
Study Between In Vivo and In Vitro” in
European Journal of Nutrition, Vol. 54.
No. 8 pp. 1281-1285.
[65] Ahmad, J., Wahab, S., Hamid, A. &
Pardi, M. (2012). Malaysian Food
Pyramid. Retrieved on September 25,
2017, from
http://www.myhealth.gov.my/en/malaysi
an-food-pyramid-2/.
[66] Gilbert, R.G., Witt, T., & Hasjim, J.
(2013). “What is Being Learned About
Starch Properties from Multiple-Level
Characterization” in Cereal Chemistry,
Vol. 90. No. 4 pp. 312-325.
[67] Moo-Huchin, V., Cabrera-Sierra, M.,
Estrada-León, R., Ríos-Soberanis, C.,
Betancur-Ancona, D., Chel-Guerrero,
L., Ortiz-Fernández, A., Estrada-Mota,
I. & Pérez-Pacheco, E. (2015).
“Determination of Some
Physicochemical and Rheological
Characteristics of Starch Obtained from
Brosimum Alicastrum Swartz Seeds” in
Food Hydrocolloids, Vol. 45 pp. 48-54.
[68] Syahariza, Z. & Yong, H. (2017).
“Evaluation of Rheological and Textural
Properties of Texture-Modified Rice
Porridge using Tapioca and Sago Starch
as Thickener” in Journal of Food
Measurement and Characterization,
Vol. 11. No. 4 pp. 1586 - 1591.
[69] Zhou, Q., Li, X., Yang, J., Zhou, L., Cai,
J., Wang, X., Dai, T., Cao, W. & Jiang,
D. (2018). “Spatial Distribution Patterns
of Protein and Starch in Wheat Grain
Affect Baking Quality of Bread and
Biscuit” in Journal of Cereal Science,
Vol. 79 pp. 362-369.
[70] Zhou, Q., Li, X., Yang, J., Zhou, L., Cai,
J., Wang, X., Dai, T., Cao, W. & Jiang,
D. (2018). “Spatial Distribution Patterns
of Protein and Starch in Wheat Grain
Affect Baking Quality of Bread and
Biscuit” in Journal of Cereal Science,
Vol. 79 pp. 362-369.
[71] Ogunmuyiwa, O.H., Adebowale, A.A.,
Sobukola, O.P., Onabanjo, O.O.,
Obadina, A.O., Adegunwa, M.O.,
Kajihausa, O.E., Sanni, L.O. & Keith, T.
(2017). “Production and Quality
Evaluation of Extruded Snack from
Blends of Bambara Groundnut Flour,
Cassava Starch, and Corn Bran Flour” in
Journal of Food Processing and
Preservation, pp. 1-11.
[72] Agudelo, A., Varela, P., Sanz, T. &
Fiszman, S. (2014). “Native Tapioca
Starch as A Potential Thickener for Fruit
Fillings. Evaluation of Mixed Models
Containing Low-Methoxyl Pectin” in
Food Hydrocolloids, Vol. 35 pp. 297-
304.
[73] Oladunmoye, O.O., Aworh, O.C.,
Maziya‐Dixon, B., Erukainure, O.L. &
Elemo, G.N. (2014). “Chemical and
Functional Properties of Cassava Starch,
Durum Wheat Semolina Flour, and
Their Blends” in Food Science and
Nutrition, Vol. 2. No. 2 pp. 132-138.
[74] Daudt, R.M., Külkamp-Guerreiro, I.C.,
Cladera-Olivera, F., Thys, R.C.S. &
Marczak, L.D.F. (2014). “Determination
of Properties of Pinhão Starch: Analysis
of Its Applicability as Pharmaceutical
Excipient” in Industrial Crops and
Products,Vol. 52 pp. 420-429.
[75] Singh, A.V., Kumar, R. & Singh, A.
(2015). “Evaluation of Physicochemical
Character of Trapa Bispinosa Roxb
Starch as Pharmaceutical Excipient” in
Journal of Science and Technology, Vol.
3. No. 6 pp. 73-81.
[76] Kargarzadeh, H., Johar, N., & Ahmad, I.
(2017). “Starch Biocomposite Film
Reinforced by Multiscale Rice Husk
Fiber” in Composites Science and
Technology, doi:
10.1016/j.compscitech.2017.08.018
[77] Fakhouri, F.M., Martelli, S.M., Caon,
Velasco, T.J.I. & Mei, L.H.I. (2015).
“Edible Films and Coatings Based on
Starch/Gelatin: Film Properties and
Effect of Coatings On Quality Of
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
163
Refrigerated Red Crimson Grapes” in
Postharvest Biology and Technology,
Vol. 109 pp. 57-64.
[78] Hanif, M., Mahlia, T., Aditiya, H. &
Chong,W. (2016). “Techno-Economic
and Environmental Assessment of
Bioethanol Production from High Starch
and Root Yield Sri Kanji 1 Cassava in
Malaysia” in Energy Reports, Vol. 2 pp.
246-253.
[79] LeCorre, D., Dufresne, A. Rueff, M.,
Khelifi, B. & Bras, J. (2014). “All Starch
Nanocomposite Coating for Barrier
Material” in Journal of Applied Polymer
Science, Vol. 131. No 3 pp. 1-7.
[80] Cheng, S., Zhao, W. & Wu,Y. (2015).
“Optimization of Synthesis and
Characterization of Oxidized Starch‐
Graft‐Poly (Styrene‐Butyl Acrylate)
Latex for Paper Coating” in Starch
‐
Stärke, Vol. 67. No. 5-6 pp. 493-501.
[81] Majzoobi, M., Hedayati, S., Habibi, M.,
Ghiasi, F. & Farahnaky, A. (2014).
“Effects of Corn Resistant Starch on The
Physicochemical Properties of Cake” in
Journal of Agricultural Science and
Technology, Vol. 16 No. 3 pp. 569-576.
[82] Guadarrama-Lezama, A., Carrillo-
Navas, H., Pérez-Alonso, C., Vernon-
Carter, E. & Alvarez-Ramirez, J. (2016).
“Thermal and Rheological Properties of
Sponge Cake Batters and Texture and
Microstructural Characteristics of
Sponge Cake Made with Native Corn
Starch in Partial or Total Replacement of
Wheat Flour” in LWT-Food Science and
Technology, Vol.70 pp. 46-54.
[83] Li, Z., Liu, W., Gu, Z., Li, C., Hong, Y.
& Cheng, L. (2015). “The Effect of
Starch Concentration on The
Gelatinization and Liquefaction of Corn
Starch” in Food Hydrocolloids, Vol. 48
pp.189-196.
[84] González-Bermúdez, C.A., Frontela-
Saseta, C., López-Nicolás, R., Ros-
Berruezo, G. & Martínez-Graciá, C.
(2014). “Effect of Adding Different
Thickening Agents on The Viscosity
Properties and In Vitro Mineral
Availability of Infant Formula” in Food
Chemistry, Vol. 159 pp.5-11.
[85] Sitohang, K.A., Lubis, Z. & Lubis, L.M.
(2015). “The Effect of Ratio Wheat
Starch and Breadfruit Flours with Kinds
of Stabilizer on The Quality of
Breadfruit Cookies” in Jurnal Rekayasa
Pangan dan Pertanian, Vol.3 No. 3 pp.
308-315.
[86] Majzoobi, M., Kaveh, Z. & Farahnaky,
A. (2016). “Effect of Acetic Acid on
Physical Properties of Pregelatinized
Wheat and Corn Starch Gels” in Food
Chemistry, Vol. 196 pp. 720-725.
[87] Witczak, T., Witczak, M. & Ziobro, R.
(2014). “Effect of Inulin and Pectin on
Rheological and Thermal Properties of
Potato Starch Paste and Gel” in Journal
of Food Engineering, Vol. 124 pp. 72-
79.
[88] da Rosa Zavareze, E., Pinto, V.Z., Klein,
B., El Halal, S.L.M., Elias, M.C.,
Prentice-Hernández, C. & Dias, A.R.G.
(2012). “Development of Oxidised and
Heat–Moisture Treated Potato Starch
Film” in Food Chemistry, Vol. 132. No.
1 pp. 344-350.
[89] Pongjaruvat, W., Methacanon, P.,
Seetapan, N., Fuongfuchat, A. &
Gamonpilas,C. (2014). “Influence of
Pregelatinised Tapioca Starch and
Transglutaminase on Dough Rheology
and Quality of Gluten-Free Jasmine Rice
Breads” in Food Hydrocolloids, Vol. 36
pp. 143-150.
[90] Agudelo, A., Varela, P., Sanz, T. &
Fiszman, S. (2014). “Native Tapioca
Starch as A Potential Thickener for Fruit
Fillings. Evaluation of Mixed Models
Containing Low-Methoxyl Pectin” in
Food Hydrocolloids, Vol. 35 pp. 297-
304.
[91] Wongsagonsup, R., Pujchakarn, T.,
Jitrakbumrung, S., Chaiwat,W.,
Fuongfuchat, A., Varavinit, S., Dangtip,
S. & Suphantharika, M. (2014). “Effect
of Cross-Linking on Physicochemical
Properties of Tapioca Starch and Its
Application in Soup Product” in
Carbohydrate Polymers, Vol. 101 pp.
656-665.
[92] Li, C., Li, Y., Sun, P. & Yang, C.
(2013). “Pickering Emulsions Stabilized
by Native Starch Granules” in Colloids
and Surfaces A: Physicochemical and
Engineering Aspects, Vol. 431 pp. 142-
149.
[93] Sun, J., Zuo, X.B., Fang, S., Xu, H.N.,
Chen, J., Y. Meng, C. & Chen, T.
(2017). “Effects of Cellulose Derivative
Hydrocolloids on Pasting, Viscoelastic,
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
164
and Morphological Characteristics of
Rice Starch Gel” in Journal of Texture
Studies, Vol.48. No. 3 pp. 241-248.
[94] Shrivastava, M., Yadav, R.B., Yadav,
B.S. & Dangi, N. (2018). “Effect of
Incorporation of Hydrocolloids on The
Physicochemical, Pasting and
Rheological Properties of Colocasia
Starch” in Journal of Food
Measurement and Characterization, pp.
1-9.
[95] Ehtiati, A., Koocheki, A., Shahidi, F.,
Razavi, S.M.A. & Majzoobi, M. (2017).
“Pasting, Rheological, and
Retrogradation Properties of Starches
from Dual‐Purpose Sorghum Lines” in
Starch
‐
Stärke, Vol. 69 pp. 7-8.
[96] Thory, R. & Sandhu, K.S. (2017). “A
Comparison of Mango Kernel Starch
With A Novel Starch from Litchi (Litchi
Chinensis) Kernel: Physicochemical,
Morphological, Pasting, and Rheological
Properties” in International Journal of
Food Properties, Vol. 20. No. 4 pp. 911-
921.
[97] Amini, A.M., Razavi, S.M.A. &
Mortazavi, S.A. (2015). “Morphological,
Physicochemical, and Viscoelastic
Properties of Sonicated Corn Starch” in
Carbohydrate Polymers, Vol. 122 pp.
282-292.
[98] Afolabi, T.A., Opara, A.O., Kareem,
S.O. & Oladoyinbo, F.O. (2018). “In
Vitro Digestibility of Hydrothermally
Modified Bambara Groundnut (Vigna
Subterranean L.) Starch and Flour” in
Food Science and Nutrition, Vol. 6. No.
1 pp. 36-46.
[99] Agiriga, A. & Siwela, M. (2017).
“Techniques Applied in Characterising
Non-starch Polysaccharides in
Underutilised Crops in Sub-Saharan
Africa” in Food Analytical Methods,
Vol. 10. No. 9 pp. 3106-3118.
[100] Bello‐Pérez, L.A., García‐Suárez, F.J.,
Méndez‐Montealvo, G., Oliveira do
Nascimento, J.R., Lajolo, F.M. &
Cordenunsi, B.R. (2006). “Isolation and
Characterization of Starch From Seeds
of Araucaria Brasiliensis: A Novel
Starch for Application in Food Industry”
in Starch
‐
Stärke, Vol. 58. No. 6 pp. 283-
291.
[101] Nawab, A., Alam, F., Haq, M.A. &
Hasnain, A. (2016). “Effect of Guar and
Xanthan Gums on Functional Properties
of Mango (Mangifera Indica) Kernel
Starch” in International Journal of
Biological Macromolecules, Vol. 93 pp.
630-635.
[102] Irani, M., Abdel-Aal, E.-S.M., Razavi,
S.M., Hucl, P. & Patterson, C.A. (2017).
“Thermal and Functional Properties of
Hairless Canary Seed (Phalaris
canariensis L.) Starch in Comparison
with Wheat Starch” in Cereal
Chemistry, Vol. 94. No. 2 pp. 341-348.
[103] Tran, P. L., Nguyen, D.H.D., Do, V.H.,
Kim, Y.-L., Park, S., Yoo,S.-H., Lee, S.
& Kim, Y.-R. (2015). “Physicochemical
Properties of Native and Partially
Gelatinized High-Amylose Jackfruit
(Artocarpus heterophyllus Lam.) Seed
Starch” in LWT-Food Science and
Technology, Vol. 62. No. 2 pp. 1091-
1098.
[104] Rayner, M., Timgren, A., Sjöö, M. &
Dejmek, P. (2012). “Quinoa Starch
Granules: A Candidate For Stabilising
Food‐Grade Pickering Emulsions” in
Journal of the Science of Food and
Agriculture, Vol. 92 No. 9 pp. 1841-
1847.
[105] Tsatsaragkou, K., Gounaropoulo, G. &
Mandala, I. (2014). “Development of
Gluten Free Bread Containing Carob
Flour and Resistant Starch” in LWT-
Food Science and Technology, Vol. 58.
No. 1 pp. 124-129.
[106] Abegunde, O.K., Mu, T.-H., Chen, J.-W.
& Deng, F.-M. (2013).
“Physicochemical Characterization of
Sweet Potato Starches Popularly Used in
Chinese Starch Industry” in Food
Hydrocolloids, Vol. 33. No. 2 pp. 169-
177.
[107] Cruz, B.R., Abraão, A.S., Lemos, A.M.
& Nunes, F.M. (2013). “Chemical
Composition and Functional Properties
of Native Chestnut Starch (Castanea
sativa Mill)” in Carbohydrate Polymers,
Vol. 94. No. 1 pp. 594-602.
[108] Spada, F.P., Zerbeto, L.M., Ragazi,
G.B.C., Gutierrez, É.M.R., Souza, M.C.,
Parker, J. K. & Canniatti-Brazaca, S.G.
(2017). “Optimization of Postharvest
Conditions to Produce Chocolate Aroma
from Jackfruit Seeds” in Journal of
Agricultural and Food Chemistry, Vol.
65. No. 6 pp. 1196-1208.
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
165
[109] Spada, J.C., Marczak, L.D.F., Tessaro,
I.C. & Noreña, C.P.Z. (2012).
“Microencapsulation of β‐Carotene
Using Native Pinhão Starch, Modified
Pinhão Starch and Gelatin by Freeze‐
Drying” in , Vol. 47. No. 1 pp. 186-194.
[110] Murali, S., Kar, A., Patel, A.S.,
Mohapatra, D. & Krishnakumar, P.
(2017). “Optimization of Rice Bran Oil
Encapsulation Using Jackfruit Seed
Starch–Whey Protein Isolate Blend as
Wall Material and Its characterization”
in International Journal of Food
Engineering, Vol. 13. No. 4 pp. 1-11.
[111] Noor, F., Rahman, M.J., Mahomud,
M.S., Akter, M.S., Talukder, M.A.I. &
Ahmed, M. (2014). “Physicochemical
Properties of Flour and Extraction of
Starch From Jackfruit Seed” in
International Journal of Nutrition and
Food Sciences, Vol. 4. No. 3 pp. 347-
354.
[112] Siti Faridah, M. & Noor Aziah, A.A.
(2012). “Development of Reduced
Calorie Chocolate Cake With Jackfruit
Seed (Artocarpus heterophyllus Lam.)
Flour and Polydextrose Using Response
Surface Methodology (RSM)” in
International Food Research Journal,
Vol. 19. No. 2 pp. 515-519.
[113] Nawab, A., Alam, F. & Hasnain, A.
(2017). “Mango Kernel Starch as A
Novel Edible Coating for Enhancing
Shelf-life of Tomato (Solanum
lycopersicum) Fruit” in International
Journal of Biological Macromolecules,
Vol. 103 pp. 581-586.
[114] Tesfaye, T., Johakimu, J.K., Chavan, R.,
Sithole, B. & Ramjugernath, D. (2018).
“Valorisation of Mango Seed Via
Extraction of Starch: Preliminary
Techno-Economic Analysis” in Clean
Technologies and Environmental Policy,
Vol. 20. No. 1 pp. 81-94.
[115] Nawab, A., Alam, F. & Hasnain, A.
(2017). “Mango Kernel Starch as a
Novel Edible Coating for Enhancing
Shelf-Life of Tomato (Solanum
lycopersicum) Fruit” in International
Journal of Biological Macromolecules,
Vol. 103 pp. 581-586.
[116] Bet, C., Cordoba, L., Ribeiro, L. &
Schnitzler, E. (2017). “Effect of Acid
Modification on The Thermal,
Morphological and Pasting Properties of
Starch From Mango Kernel (Mangifera
indica L.) of Palmer Variety” in
International Food Research Journal,
Vol. 24. No. 5 pp. 1967-1974.
[117] Zabidi, M. A. & Yunus, A.M. (2014).
“Effect on Physicochemical and Sensory
Attributes of Bread Substituted with
Different Levels of Matured Soursop
(Anona muricata) Flour” in International
Journal of Biological, Food, Veterinary
and Agricultural Engineering, Vol. 8.
No. 7 pp. 732-736.
[118] Kumari, R., Sl, S., Hn, M. & Meghwal,
M. (2017). “Physicochemical and
Functional Properties of Curcuma
angustifolia (Tikhur) - An Underutilized
Starch” in The Pharma Innovation, Vol.
6. No. 7(b) pp. 114.
[119] Punia, R., Sharma, M.M., Kalita, D.,
Mukhrjee, J., Nayak, T. & Singh, H.
(2017). “Physicochemical,
Morphological, Thermal and Pasting
Characteristics of Starches from Moth
Bean (Vigna aconitifolia) Cultivars
Grown in India: An Underutilized Crop”
in Journal of Food Science and
Technology, Vol. 54. No. 13 pp. 4484-
4492.
[120] Kaur, M. & Singh, S. (2016).
“Physicochemical, Morphological,
Pasting, and Rheological Properties of
Tamarind (Tamarindus indica L.)
Kernel Starch” in International Journal
of Food Properties, Vol. 19. No. 11 pp.
2432-2442.
[121] Agama‐Acevedo, E., Rodriguez‐Ambriz,
S.L., García‐Suárez, F.J., Gutierrez‐
Méraz, F., Pacheco‐Vargas, G. & Bello‐
Pérez, L.A. (2014). “Starch Isolation and
Partial Characterization of Commercial
Cooking and Dessert Banana Cultivars
Growing in Mexico” in Starch‐Stärke,
Vol. 66. No. 3-4 pp. 337-344.
[122] Jain, S. & Anal, A.K. (2018).
“Preparation of Eggshell Membrane
Protein Hydrolysates and Culled Banana
Resistant Starch-Based Emulsions and
Evaluation of Their Stability and
Behavior in Simulated Gastrointestinal
Fluids” in Food Research International,
Vol. 103 pp. 234-242.
[123] Oyeyinka, S.A., Adegoke,R., Oyeyinka,
A.T., Salami, K.O., Olagunju, O.F.,
Kolawole, F.L., Joseph, J.K. &
Bolarinwa I.F. (2018). “Effect of
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
166
Annealing on The Functionality of
Bambara Groundnut (Vigna
subterranea) Starch–Palmitic Acid
Complex” in International Journal of
Food Science and Technology, Vol. 53.
No. 2 pp. 549-555.
[124] Thory, R. & Sandhu, K.S. (2017). “A
Comparison of Mango Kernel Starch
With a Novel Starch from Litchi (Litchi
chinensis) Kernel: Physicochemical,
Morphological, Pasting, and Rheological
Properties” in International Journal of
Food Properties, Vol. 20. No. 4 pp. 911-
921.
[125] Lappalainen, K., Kärkkäinen, J.,
Niemelä, M., Vartiainen, H., Rissanen,
O. & Korva, H. (2017). “Preparation of
Cationized Starch from Food Industry
Waste Biomass and Its Utilization in
Sulfate Removal from Aqueous
Solution” in Carbohydrate Polymers,
Vol. 178 pp. 331-337.
[126] Lin, J.-H., Kao, W.-T., Tsai, Y.-C. &
Chang,Y.-H. (2013). “Effect of Granular
Characteristics on Pasting Properties of
Starch Blends” in Carbohydrate
Polymers, Vol. 98. No. 2 pp. 1553-1560.
[127] Zhang, S., Zhou, Y., Jin, S., Meng, X.
Yang, L. & Wang, H. (2017).
“Preparation and Structural
Characterization of Corn Starch–Aroma
Compound Inclusion Complexes” in
Journal of the Science of Food and
Agriculture, Vol. 97, No. 1 pp. 182-190.
[128] Park, E.Y., Ma, J.-G., Kim, J.D.H., Lee,
S., Kim, Y., Kwon, D.-J. & Kim, J.-Y.
(2018). “Effect of Dual Modification of
HMT and Crosslinking on
Physicochemical Properties and
Digestibility of Waxy Maize Starch” in
Food Hydrocolloids, Vol. 75 pp. 33-40.
[129] Waliszewski, K.N., Aparicio, M.A.,
Bello, L.S.A. & Monroy, J.A. (2003).
“Changes of Banana Starch by Chemical
and Physical Modification” in
Carbohydrate Polymers, Vol. 52. No. 3
pp. 237-242.
[130] Syahariza, Z. & Yong, H. (2017).
“Evaluation of Rheological and Textural
Properties of Texture-Modified Rice
Porridge Using Tapioca and Sago Starch
As Thickener” in Journal of Food
Measurement and Characterization, pp.
1-6, http:// DOI 10.1007/s11694-017-
9538-x.
[131] Park, E.Y., Ma, J.-G., Kim, J., Lee,
D.H., Kim, S.Y., Kwon, D.-J. & Kim, J.-
Y. (2018). “Effect of Dual Modification
of HMT and Crosslinking on
Physicochemical Properties and
Digestibility of Waxy Maize Starch” in
Food Hydrocolloids, Vol. 75 pp. 33-40.
[132] Sukhija, S., Singh, S. & Riar, C.S.
(2016). “Physicochemical, Crystalline,
Morphological, Pasting and Thermal
Properties of Modified Lotus Rhizome
(Nelumbo nucifera) Starch” in Food
Hydrocolloids, Vol. 60 pp. 50-58.
[133] Hazarika, B. J. & Sit, N. (2016). “Effect
of Dual Modification with
Hydroxypropylation and Cross-Linking
on Physicochemical Properties of Taro
Starch” in Carbohydrate Polymers, Vol.
140 pp. 269-278.
[134] Wang, C., He, X., Fu, X., Huang, Q. &
Zhang, B. (2016). “Substituent
Distribution Changes The Pasting and
Emulsion Properties of Octenylsuccinate
Starch” in Carbohydrate Polymers, Vol.
135 pp. 64-71.
[135] Witczak, T., Stępień, A., Witczak, M.,
Pietrzyk, S., Bednarz, A. & Florkiewicz,
A. (2016). “Sorption Properties of
Modified Potato Starch” in Nauka
Przyroda Technologie, Vol. 10. No. 4
pp. 48.
[136] Li, Y., Ding, G., Yokoyama, W. &
Zhong, F. (2018). “Characteristics of
Annealed Glutinous Rice Flour and Its
Formation of Fast-Frozen Dumplings” in
Journal of Cereal Science, Vol. 79 pp.
106-112.
[137] Ma, X., Liu, X., Anderson, D.P. &
Chang, P.R. (2015). “Modification of
Porous Starch for The Adsorption of
Heavy Metal Ions from Aqueous
Solution” in Food Chemistry, Vol. 181
pp. 133-139.
[138] Flores-Hernández, C.G., Colin-Cruz, A.,
Velasco-Santos, C., Castaño, V.M.,
Almendarez-Camarillo, A., Olivas-
Armendariz, I. & Martínez-Hernández,
A.L. (2017). “Chitosan–Starch–Keratin
Composites: Improving Thermo-
Mechanical and Degradation Properties
Through Chemical Modification” in
Journal of Polymers and the
Environment, pp. 1-10.
[139] Rosu, A. M., Grigoras, C.G., Rafin, C.
& Veignie, E. (2017). “A Green
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
167
Chemical Approach of Corn Starch
Modification for Innovative Solutions In
Adsorption of Polycyclic Aromatic
Hydrocarbons” in Scientific Study and
Research. Chemistry and Chemical
Engineering, Biotechnology, Food
Industry, Vol. 18. No. 1 pp. 97.
[140] Lobato-Calleros, C., Ramírez-Santiago,
C., Vernon-Carter, E. & Alvarez-
Ramirez, J. (2014). “Impact of Native
and Chemically Modified Starches
Addition as Fat Replacers in The
Viscoelasticity of Reduced-Fat Stirred
Yogurt” in Journal of Food Engineering,
Vol. 131 pp. 110-115.
[141] Ramírez‐Hernández, A., Aparicio‐
Saguilán, A., Mata‐Mata, J.L.,
González‐García, G., Hernández‐
Mendoza, H., Gutiérrez‐Fuentes, A. &
Báez‐García, E. (2017). “Chemical
Modification of Banana Starch by The
In Situ Polymerization of ϵ‐Caprolactone
in One Step” in Starch‐Stärke, Vol. 69
pp. 5-6.
[142] Pycia, K., Juszczak, L., Gałkowska, D.,
Socha, R. & Jaworska, G. (2017).
“Maltodextrins from Chemically
Modified Starches. Production and
Characteristics” in Starch‐Stärke, Vol.
69 pp. 5-6.
[143] Pycia, K., Gryszkin, A., Berski, W. &
Juszczak, L. (2018). “The Influence of
Chemically Modified Potato
Maltodextrins on Stability and
Rheological Properties of Model Oil-in-
Water Emulsions” in Polymers, Vol. 10.
No. 1 pp. 67.
[144] Arijaje, E.O., Wang,Y.-J., Shinn, S.,
Shah, U. & Proctor, A. (2014). “Effects
of Chemical and Enzymatic
Modifications on Starch–Stearic Acid
Complex Formation” in Journal of
Agricultural and Food Chemistry, Vol.
62. No. 13 pp. 2963-2972.
[145] Singh, M. & Adedeji, A.A. (2017).
“Characterization of Hydrothermal and
Acid Modified Proso Millet Starch” in
LWT-Food Science and Technology,
Vol. 79 pp. 21-26.
[146] Lawal, M.V., Odeniyi, M.A. & Itiola,
O.A. (2015). “Effect of Thermal and
Chemical Modifications on The
Mechanical and Release Properties of
Paracetamol Tablet Formulations
Containing Corn, Cassava and Sweet
Potato Starches As Filler-Binders” in
Asian Pacific Journal of Tropical
Biomedicine, Vol. 5. No. 7 pp. 585-590.
[147] Biduski, B., da Silva, F.T., da Silva,
W.M., El Halal, S.L.d.M., Pinto,V.Z.,
Dias, A.R.G. & da Rosa Zavareze, E.
(2017). “Impact of Acid and Oxidative
Modifications, Single or Dual, of
Sorghum Starch on Biodegradable
Films” in Food Chemistry, Vol. 214 pp.
53 - 60.
[148] Sukhija, S., Singh, S. & Riar, C.S.
(2016). “Effect of Oxidation, Cross-
Linking and Dual Modification on
Physicochemical, Crystallinity,
Morphological, Pasting and Thermal
Characteristics of Elephant Foot Yam
(Amorphophallus paeoniifolius) Starch”
in Food Hydrocolloids, Vol. 55 pp. 56-
64.
[149] Sukhija, S., Singh, S. & Riar, C.S.
(2016). “Physicochemical, Crystalline,
Morphological, Pasting and Thermal
Properties of Modified Lotus Rhizome
(Nelumbo nucifera) Starch” in Food
Hydrocolloids, Vol. 60 pp. 50-58.
[150] Karadbhajne, S. & Yatin, S. (2014).
“Comparison of Physico-Chemical
Properties of Modified Jackfruit Starch
with Maize Starch” in International
Journal of ChemTech Research, Vol. 6.
No. 1 pp. 487-494.
[151] Gul, K., Riar, C.S., Bala, A. & Sibian,
M.S. (2014). “Effect of Ionic Gums and
Dry Heating on Physicochemical,
Morphological, Thermal and Pasting
Properties of Water Chestnut Starch” in
LWT-Food Science and Technology,
Vol. 59. No. 1 pp. 348-355.
[152] Lozano-Vazquez, G., Lobato-Calleros,
C., Escalona-Buendia, H., Chavez G.,
Alvarez-Ramirez, J. & Vernon-Carter,
E. (2015). “Effect of The Weight Ratio
of Alginate-Modified Tapioca Starch on
The Physicochemical Properties and
Release Kinetics of Chlorogenic Acid
Containing Beads” in Food
Hydrocolloids, Vol. 48 pp. 301-311.
[153] Raseetha, S., Zulkifli, M.F., Nurul –
Nabilah, M. & Ismail, W.I.W. (2017).
“Inhibition of Lipid Accumulation in
3T3 – L1 Adipocytes by Chlorogenic
Acid Derived from Green Coffee
(Robusta sp.) Beans and Pulps” in
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
168
Malaysian Applied Biology, Vol. 46.
No. 4 pp. 175–182.
[154] Ashwar, B.A., Gani, A., Shah, A. &
Masoodi, F.A. (2017). “Production Of
RS4 from Rice by Acetylation: Physico‐
Chemical, Thermal, and Structural
Characterization” in Starch‐Stärke, Vol.
69 pp. 1-2.
[155] Hong, J., Zeng, X.-A., Buckow, R., Han,
Z. & Wang, M.-S. (2016).
“Nanostructure, Morphology and
Functionality of Cassava Starch After
Pulsed Electric Fields Assisted
Acetylation” in Food Hydrocolloids,
Vol. 54 pp. 139-150.
[156] Lim, Y.-M., Hoobin, P., Ying, D.
Burgar, I., Gooley, P.R. & Augustin,
M.A. (2015). “Physical Characterisation
of High Amylose Maize Starch and
Acylated High Amylose Maize
Starches” in Carbohydrate Polymers,
Vol. 117 pp. 279-285.
[157] Liu, J., Wang, B., Lin, L., Zhang, J., Liu,
W., Xie, J. & Ding, Y. (2014).
“Functional, Physicochemical Properties
and Structure of Cross-Linked Oxidized
Maize Starch” in Food Hydrocolloids,
Vol. 36 pp. 45-52.
[158] Isah, S., Oshodi, A. & Atasie, V. (2017).
“Physicochemical Properties of Cross
Linked Acha (Digitaria exilis) Starch
with Citric Acid” in Chem. Int, Vol. 3
pp. 150-157.
[159] Schnitzler, E., Silva, R.G., Cordoba,
L.P., Ribeiro, L.S. & Bet, C.D. (2015).
“Thermal, Rheological and Structural
Analysis of Modified Green Banana
Starch with Hydrochloric Acid” in
Brazilian Journal of Thermal Analysis,
Vol. 4. No. 3 pp. 26-31.
[160] Bet, C., Cordoba, L., Ribeiro, L. &
Schnitzler, E. (2017). “Effect of Acid
Modification on The Thermal,
Morphological and Pasting Properties of
Starch from Mango Kernel (Mangifera
indica L.) of Palmer variety” in
International Food Research Journal,
Vol. 24. No. 5.
[161] Singh, M. & Adedeji, A.A. (2017).
“Characterization of Hydrothermal and
Acid Modified Proso Millet Starch” in
LWT-Food Science and Technology,
Vol. 79 pp. 21-26.
[162] Colussi, R., El Halal, S.L.M., Pinto,
V.Z., Bartz, J., Gutkoski, L.C., da Rosa
Zavareze, E. & Dias, A.R.G. (2015).
“Acetylation of Rice Starch in An
Aqueous Medium for Use in Food” in
LWT-Food Science and Technology,
Vol. 62. No. 2 pp. 1076-1082.
[163] Colussi, R., Pinto, V.Z., El Halal,
S.L.M., Vanier, N.L., Villanova, F.A., e
Silva, R.M., da Rosa Zavareze E. &
Dias, A.R.G. (2014). “Structural,
Morphological, and Physicochemical
Properties of Acetylated High, Medium,
and Low-Amylose Rice Starches” in
Carbohydrate Polymers, Vol. 103 pp.
405-413.
[164] Oh, S.M. & Shin, M. (2015).
“Physicochemical Properties and
Molecular Structures of Korean Waxy
Rice Starches” in Food Science and
Biotechnology, Vol. 24. No. 3 pp. 791-
798.
[165] Nawaz, M.A., Fukai,S., Prakash, S. &
Bhandari, B. (2018). “Effect of Starch
Modification in The Whole White Rice
Grains on Physicochemical Properties of
Two Contrasting Rice Varieties” in
Journal of Cereal Science, http://
doi.10.1016/j.jcs.2018.02.007
[166] Kim, J.Y., Lee, Y.-K. & Chang, Y.H.
(2017). “Structure and Digestibility
Properties of Resistant Rice Starch
Cross-Linked with Citric Acid” in
International Journal of Food Properties,
pp. 1-12.
[167] Fouladi, E. & Nafchi, A.M. (2014).
“Effects of Acid-Hydrolysis and
Hydroxypropylation on Functional
Properties of Sago Starch” in
International Journal of Biological
Macromolecules, Vol. 68 pp. 251-257.
[168] Nanggewa, Y.A., Purnomo, A.S. &
Putra, S.R. (2016). “Effects of Acetic
Anhydride Toward Degree of
Substitution on Acetylation Method of
Sago Starch (Metroxylon sp.) from
Papua” in IPTEK Proceedings Series,
Vol. 2. No. 1.
[169] Abiddin, N.Z., Yusoff, A. & Ahmad, N.
(2018). “Effect of Octenylsuccinylation
on Physicochemical, Thermal,
Morphological and Stability of Octenyl
Succinic Anhydride (OSA) Modified
Sago Starch” in Food Hydrocolloids,
Vol. 75 pp. 138-146.
[170] Ismail, N.M., Osman, H. &
Husseinsyah, S. (2014). “Tensile
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
169
Properties of Durian Seed Starch Filled
Low Density Polyethylene Composites:
Effects of Chemical Surface
Modification by Acetic Acid” in
Applied Mechanics and Materials, Vol.
695 pp. 310.
[171] Yusoff, M.S., Aziz, M.F., Zamri, M.A.
Abdullah, A.Z., & Basri, N.E.A. (2018).
“Floc Behavior and Removal
Mechanisms of Cross-Linked Durio
zibethinus Seed Starch As A Natural
Flocculant for Landfill Leachate
Coagulation-Flocculation Treatment” in
Waste Management,
https://doi.org/10.1016/j.wasman.2018.0
1.016
[172] Bet, C.D., Waiga,L.H., de Oliveira, C.S.,
Lacerda, L.G. & Schnitzler, E. (2017).
“Morphological and Thermoanalytical
Study of Modified Avocado Seeds with
Lactic Acid” in Chemistry Journal of
Moldova, Vol. 12. No. 2 pp. 13 - 18.
[173] Cornelia, M. & Christianti, A. (2018).
“Utilization of Modified Starch from
Avocado (Persea americana Mill.) Seed
in Cream Soup Production” in IOP
Conference Series: Earth and
Environmental Science, IOP Publishing,
doi :10.1088/1755-1315/102/1/012074.
[174] Bhandari, L., Sodhi, N.S. & Chawla, P.
(2016). “Effect of Acidified Methanol
Modification on Physico Chemical
Properties of Black-Eyed Pea (Vigna
unguiculata) Starch” in International
Journal of Food Properties, Vol. 19. No.
12 pp. 2635-2648.
[175] Vanier, N.L., da Rosa Zavareze, E.,
Pinto, V.Z., Klein, B. Botelho, F.T.,
Dias, A.R.G. & Elias, M.C. (2012).
“Physicochemical, Crystallinity, Pasting
and Morphological Properties of Bean
Starch Oxidised by Different
Concentrations of Sodium
Hypochlorite” in Food Chemistry, Vol.
131. No. 4 pp. 1255-1262.
[176] Ali, T.M. & Hasnain, A. (2014).
“Morphological, Physicochemical, and
Pasting Properties of Modified White
Sorghum (Sorghum bicolor) Starch” in
International Journal of Food Properties,
Vol. 17. No. 3 pp. 523-535.
[177] Mehboob, S., Ali, T.M., Alam, F. &
Hasnain, A. (2015). “Dual Modification
of Native White Sorghum (Sorghum
bicolor) Starch Via Acid Hydrolysis and
Succinylation” in LWT-Food Science
and Technology, Vol. 64. No. 1 pp. 459-
467.
[178] Fonseca, L.M., Gonçalves, J.R., El
Halal, S.L.M., Pinto, V.Z., Dias, A.R.G.,
Jacques, A.C. & da Rosa Zavareze, E.
(2015). “Oxidation of Potato Starch with
Different Sodium Hypochlorite
Concentrations and Its Effect on
Biodegradable Films” in LWT-Food
Science and Technology, Vol. 60. No. 2
pp. 714-720.
[180] Pietrzyk, S., Fortuna, T., Juszczak, L.,
Gałkowska, D., Bączkowicz, M.,
Łabanowska, M. & Kurdziel, M. (2018).
“Influence of Amylose Content and
Oxidation Level of Potato Starch on
Acetylation, Granule Structure and
Radicals’ Formation” in International
Journal of Biological Macromolecules,
Vol. 106 pp. 57-67.
[181] Ulbrich, M., Lampl, V. & Flöter, E.
(2016). “Impact of Modification
Temperature on The Properties of Acid‐
Thinned Potato Starch” in Starch‐Stärke,
Vol. 68. No. 9-10 pp. 885-899.
[182] Heo, H., Lee, Y.K. & Chang, Y.H.
(2017). “Effect of Cross-linking On
Physicochemical and In Vitro
Digestibility Properties of Potato Starch”
in Emirates Journal of Food and
Agriculture, Vol. 29. No. 6 pp. 463.
[183] Heo, H., Lee, Y.K. & Chang, Y.H.
(2017). “Rheaological, Pasting, and
Structural Properties of Potato Starch by
Cross-linking” in International Journal
of Food Properties, pp. 1-13.
[184] El Halal, S.L.M., Colussi, R., Pinto,
V.Z., Bartz, J., Radunz, M., Carreño,
N.L.V., Dias, A.R.G. & da Rosa
Zavareze, E. (2015). “Structure,
Morphology and Functionality of
Acetylated and Oxidised Barley
Starches” in Food Chemistry, Vol. 168
pp. 247-256.
[185] Olayinka, F., Olayinka, O., Olu-
Owolabi, B. & Adebowale, K. (2015).
“Effect of Chemical Modifications on
Thermal, Rheological and
Morphological Properties of Yellow
Sorghum Starch” in Journal of Food
Science and Technology, Vol. 52. No.
12 pp. 8364-8370.
[186] Qiu, S., Yadav, M.P., Zhu, Q., Chen, H.
Liu, Y. & Yin, L. (2017). “The Addition
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
170
of Corn Fiber Gum Improves The Long-
Term Stability and Retrogradation
Properties of Corn Starch” in Journal of
Cereal Science, Vol. 76 pp. 92-98.
[187] Marrugo-Ligardo, Y., Blanco-Santander,
C., Severiche-Sierra, C. & Jaimes-
Morales, J. (2017). “Effect of
Acetylation of Bean Starch Zaragoza
(Phaseolus lunatus) Red Variety on its
Functional Properties” in International
Journal of ChemTech Research, Vol. 10
pp. 506-514.
[188] Gonçalves, P.M., Noreña, C.P.Z., da
Silveira, N.P. & Brandelli, A. (2014).
“Characterization of Starch
Nanoparticles Obtained from Araucaria
angustifolia seeds by Acid Hydrolysis
and Ultrasound” in LWT-Food Science
and Technology, Vol. 58. No. 1 pp. 21-
27.
[189] Biduski, B., da Silva, F.T., da
Silva,W.M., El Halal, S.L.d.M., Pinto,
V.Z., Dias, A.R.G. & da Rosa Zavareze,
E. (2017). “Impact of Acid and
Oxidative Modifications, Single Or
Dual, of Sorghum Starch on
Biodegradable Films” in Food
Chemistry, Vol. 214 pp. 53-60.
[190] Reddy, C., Haripriya, S. & Suriya, M.
(2014). “Effect of Acetylation on
Morphology, Pasting and Functional
Properties of Starch from Banana (Musa
AAB)” in Ind. J. Sci. Res. Technol, Vol.
2. No. 6 pp. 31-36.
[191] Bae, I.Y. & Lee, H.G. (2018). “Effect of
Dry Heat Treatment on Physical
Property and In Vitro Starch
Digestibility of High Amylose Rice
Starch” in International Journal of
Biological Macromolecules, Vol. 108
pp. 568-575.
[192] Collar, C. & Armero, E. (2018). “Impact
of Heat Moisture Treatment and
Hydration Level on Physico-Chemical
and Viscoelastic Properties of Doughs
from Wheat-Barley Composite Flours”
in European Food Research and
Technology, Vol. 244. No. 2 pp. 355-
366.
[193] Li, M., Li, J. & Zhu, C. (2018). “Effect
of Ultrasound Pretreatment on
Enzymolysis and Physicochemical
Properties of Corn Starch” in
International Journal of Biological
Macromolecules, Vol. 111 pp. 848 –
856.
[194] Fan, P., Wang, L., Jia, S., Chen, F.,
Yang, J. & Zhong, M. (2017).
“Encapsulated Graphenes Through
Ultrasonically Initiated In Situ
Polymerization: A Route to High
Dielectric Permittivity, Low Loss
Materials With Low Percolation
Threshold” in Journal of Applied
Polymer Science, Vol. 134. No. 12 pp. 1
– 10.
[195] Zhu, F. (2015). “Impact of Ultrasound
on Structure, Physicochemical
Properties, Modifications, and
Applications of Starch” in Trends in
Food Science and Technology, Vol. 43.
No. 1 pp. 1-17.
[196] Wiącek, A.E. (2015). “Effect of Surface
Modification on Starch Biopolymer
Wettability” in Food Hydrocolloids,
Vol. 48 pp. 228-237.
[197] Van Hung, P., Chau, H.T. & Phi, N.T.L.
(2016). “In Vitro Digestibility and In
Vivo Glucose Response of Native and
Physically Modified Rice Starches
Varying Amylose Contents” in Food
Chemistry, Vol. 191 pp. 74-80.
[198] Falade, K.O. & Ayetigbo, O.E. (2015).
“Effects of Annealing, Acid Hydrolysis
and Citric Acid Modifications on
Physical and Functional Properties of
Starches from Four Yam (Dioscorea
spp.) Cultivars” in Food Hydrocolloids,
Vol. 43 pp. 529-539.
[199] Shariffa, Y., Uthumporn, U., Karim, A.
& Zaibunnisa, A. (2017). “Hydrolysis of
Native and Annealed Tapioca and Sweet
Potato Starches at Sub-Gelatinization
Temperature Using A Mixture of
Amylolytic Enzymes” in International
Food Research Journal, Vol. 24. 5 pp.
1925 – 1933.
[200] Zhang, C., Han, J.-A. & Lim, S.-T.
(2017). “Characteristics of Some
Physically Modified Starches Using
Mild Heating and Freeze-Thawing” in
Food Hydrocolloids, http:// doi:
10.1016/ j.foodhyd.2017.11.035.
[201] Verma, R., Jan, S., Rani, S., Jan, K.,
Swer, T.L., Prakash, K.S., Dar,M. &
Bashir, K. (2018). “Physicochemical and
Functional Properties of Gamma
Irradiated Buckwheat and Potato Starch”
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
171
in Radiation Physics and Chemistry,
Vol. 144 pp. 37-42.
[202] Malumba, P., Doran, L., Danthine, S.,
Blecker, C. & Bera, F. (2018). “The
Effect of Heating Rates on Functional
Properties of Wheat and Potato Starch-
Water Systems” in LWT-Food Science
and Technology, Vol. 88 pp. 196-202.
[203] Loksuwan, J. (2007). “Characteristics of
Microencapsulated β-Carotene Formed
By Spray Drying with Modified Tapioca
Starch, Native Tapioca Starch and
Maltodextrin” in Food Hydrocolloids,
Vol. 21. No. 5 – 6 pp. 928 - 935.
[204] Pietrzyk, S., Fortuna, T., Juszczak, L.,
Gałkowska, D., Bączkowicz, M,.
Łabanowska, M. & Kurdziel, M. (2018).
“Influence of Amylose Content and
Oxidation Level of Potato Starch on
Acetylation, Granule Structure and
Radicals Formation” in International
Journal of Biological Macromolecules,
Vol. 106 pp. 57-67.
[205] Pinto, V.Z., Vanier, N.L., Deon, V.G.,
Moomand, K., El Halal, S.L., da Rosa
Zavareze, M., Lim, E.L.T. & Dias,
A.R.G. (2015). “Effects of Single and
Dual Physical Modifications on Pinhão
Starch” in Food Chemistry, Vol. 187 pp.
98-105.
[206] Sukhija, S., Singh, S. & Riar, C.S.
(2016). “Physicochemical, Crystalline,
Morphological, Pasting and Thermal
Properties of Modified Lotus Rhizome
(Nelumbo nucifera) Starch” in Food
Hydrocolloids, Vol. 60 pp. 50-58.
[207] Zhao, J., Schols, H.A., Chen, Z., Jin, Z.,
Buwalda, P. & Gruppen, H. (2012).
“Substituent Distribution Within Cross-
linked and Hydroxypropylated Sweet
Potato Starch and Potato Starch” in Food
Chemistry, Vol. 133. No. 4 pp. 1333-
1340.
[208] Camelo-Méndez, G.A., Agama-
Acevedo, E. Sanchez-Rivera, M.M. &
Bello-Pérez, L.A. (2016). “Effect on in-
vitro Starch Digestibility of Mexican
Blue Maize Anthocyanins” in Food
Chemistry, Vol. 211 pp. 281 - 284.
[209] Deeyai, P., Suphantharika, M.,
Wongsagonsup, R. & Dangtip, S.
(2013). “Characterization of Modified
Tapioca Starch in Atmospheric Argon
Plasma Under Diverse Humidity by
FTIR Spectroscopy” in Chinese Physics
Letters, Vol. 30 No. 1 pp. 1 – 4.
[210] Biduski, B., da Silva, F.T., da
Silva,W.M., El Halal, S.L.d.M., Pinto,
V.Z., Dias, A.R.G. & da Rosa Zavareze,
E. (2017). “Impact of Acid and
Oxidative Modifications, Single or Dual,
of Sorghum Starch on Biodegradable
Films” in Food Chemistry, Vol. 214 pp.
53-60.
[211] Sujka, M. (2017). “Ultrasonic
Modification of Starch–Impact on
Granules Porosity” in Ultrasonics
Sonochemistry, Vol. 37 pp. 424-429.
[212] Li, M., Li, J. & Zhu, C. (2018). “Effect
of Ultrasound Pretreatment on
Enzymolysis and Physicochemical
Properties of Corn Starch” in
International Journal of Biological
Macromolecules, Vol. 111 pp. 848 –
856.
[213] Xing, J.-J., Liu, Y., Li, D., Wang, L.-J.
& Adhikari, B. (2017). “Heat-Moisture
Treatment and Acid Hydrolysis of Corn
Starch in Different Sequences” in LWT-
Food Science and Technology, Vol. 79
pp. 11-20.
[214] Pinto, V.Z., Vanier, N.L., Deon, V.G.,
Moomand, K., El Halal, S.L., da Rosa
Zavareze, M., Lim, E.L.T. & Dias,
A.R.G. (2015). “Effects of Single and
Dual Physical Modifications on Pinhão
Starch” in Food Chemistry, Vol. 187 pp.
98-105.
[215] Gonçalves, P.M., Noreña, C.P.Z., da
Silveira, N.P. & Brandelli, A. (2014).
“Characterization of Starch
Nanoparticles Obtained from Araucaria
angustifolia Seeds by Acid Hydrolysis
and Ultrasound” in LWT-Food Science
and Technology, Vol. 58. No. 1 pp. 21-
27.
[216] Pinto, V.Z., Moomand, K., Vanier, N.L.,
Colussi, R., Villanova, F.A., Zavareze,
E.R., Lim, L.T. & Dias, A.R. (2015).
“Molecular Structure and Granule
Morphology of Native and Heat‐
Moisture‐Treated Pinhão Starch.
International Journal of Food Science
and Technology, Vol. 50. 2 pp. 282-289.
[217] Pinto, V.Z., Vanier, N.L., Deon, V.G.,
Moomand, K., El Halal, S.L.M., da Rosa
Zavareze, Lim, E.L.T. & Dias, A.R.G.
(2015). “Effects of Single and Dual
Physical Modifications on Pinhão
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
172
Starch” in Food Chemistry, Vol. 187 pp.
98-105.
[218] Wang, D., Ma, X., Yan, L.,
Chantapakul, T., Wang, W., Ding, T.,
Ye, X. & Liu, D. (2017). “Ultrasound
Assisted Enzymatic Hydrolysis of Starch
Catalyzed by Glucoamylase:
Investigation on Starch Properties and
Degradation Kinetics” in Carbohydrate
Polymers, Vol. 175 pp. 47-54.
[219] Bai, W., Hébraud, P., Ashokkumar, M.,
& Hemar, Y. (2017). “Investigation on
The Pitting of Potato Starch Granules
During High Frequency Ultrasound
Treatment” in Ultrasonics
Sonochemistry, Vol. 35 pp. 547-555.
[220] Monroy, Y., Rivero, S. & García, M.A.
(2017). “Microstructural and Techno-
Functional Properties of Cassava Starch
Modified by Ultrasound” in Ultrasonics
Sonochemistry, Vol. 42 pp. 795 – 804.
[221] Sujka, M. (2017). “Ultrasonic
Modification of Starch–Impact on
Granules Porosity” in Ultrasonics
Sonochemistry, Vol. 37 pp. 424-429.
[222] Van Hung, P., Chau, H.T. & Phi, N.T.L.
(2016). “In Vitro Digestibility and In
Vivo Glucose Response of Native and
Physically Modified Rice Starches
Varying Amylose Contents” in Food
Chemistry, Vol. 191 pp. 74-80.
[223] Ye, J., Hu, X., Zhang, F., Fang, C., Liu,
C. & Luo, S. (2016). “Freeze-Thaw
Stability of Rice Starch Modified by
Improved Extrusion Cooking
Technology” in Carbohydrate Polymers,
Vol. 151 pp. 113-118
[224] Sujka, M. (2017). “Ultrasonic
Modification of Starch–Impact on
Granules Porosity” in Ultrasonics
Sonochemistry, Vol. 37 pp. 424-429.
[225] Trung, P.T.B., Ngoc, L.B.B., Hoa, P.N.,
Tien, N.N.T. & Van Hung, P. (2017).
“Impact of Heat-Moisture and
Annealing Treatments on
Physicochemical Properties and
Digestibility of Starches From Different
Colored Sweet Potato Varieties” in
International Journal of Biological
Macromolecules,
http://dx.doi.org/10.1016/j.ijbiomac.201
7.07.131.
[226] Sittipod, S. & Shi, Y.C. (2016).
“Changes in Physicochemical Properties
of Rice Starch During Steeping in The
Parboiling Process” in Journal of Cereal
Science, Vol. 69 pp. 398-405.
[227] Li, G., Pang, L., Li, F., Zeng, J. & Sun,
J. (2017). “Preparation of Resistant
Sweet Potato Starch by Steam Explosion
Technology Using Response Surface
Methodology” in Tropical Journal of
Pharmaceutical Research, Vol. 16. No. 5
pp. 1121-1127.
[228] Sujka, M. (2017). “Ultrasonic
Modification of Starch–Impact on
Granules Porosity” in Ultrasonics
Sonochemistry, Vol. 37 pp. 424-429.
[229] Falade, K.O. & Ayetigbo, O.E. (2015).
“Effects of Annealing, Acid Hydrolysis
and Citric Acid Modifications on
Physical and Functional Properties of
Starches from Four Yam (Dioscorea
spp.) Cultivars” in Food Hydrocolloids,
Vol. 43 pp. 529-539.
[230] Qin, X.-S., Sun, Q.-Q., Zhao, Y.-Y,.
Zhong, X.-Y., Mu, D.-D., Jiang, S.-T.,
Luo, S.-Z. & Zheng, Z. (2017).
“Transglutaminase-Set Colloidal
Properties of Wheat Gluten With
Ultrasound Pretreatments” in
Ultrasonics Sonochemistry, Vol. 39 pp.
137-143.
[231] Wang, S., Wang, J., Wang, S. & Wang,
S. (2017). “Annealing Improves Paste
Viscosity and Stability of Starch” in
Food Hydrocolloids, Vol. 62 pp. 203-
211.
[232] Falade, K.O. & Ayetigbo, O.E. (2015).
“Effects of Annealing, Acid Hydrolysis
and Citric Acid Modifications on
Physical and Functional Properties of
Starches from Four Yam (Dioscorea
spp.) Cultivars” in Food Hydrocolloids,
Vol. 43 pp. 529-539.
[233] Tran, P.L., Nguyen, D.H.D., Do, V.H.,
Kim, Y.-L., Park, S., Yoo, S.-H., Lee, S.
& Kim, Y.-R. (2015). “Physicochemical
Properties of Native and Partially
Gelatinized High-Amylose Jackfruit
(Artocarpus heterophyllus Lam.) Seed
Starch” in LWT-Food Science and
Technology, Vol. 62. No. 2 pp. 1091-
1098.
[234] Karadbhajne, S. & Yatin, S. (2014).
“Comparison of Physico-Chemical
Properties of Modified Jackfruit Starch
with Maize Starch” in International
Journal of ChemTech Research, Vol. 6.
No. 1 pp. 487-494.
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
173
[235] Włodarczyk-Stasiak, M., Mazurek, A.,
Kowalski, R., Pankiewicz, U. & Jamroz,
J. (2017). “Physicochemical Properties
of Waxy Corn Starch After Three-Stage
Modification” Food Hydrocolloids, Vol.
62 pp. 182-190.
[236] Arns, B., Bartz, J., Radunz, M., do
Evangelho, J.A., Pinto, V.Z., da Rosa
Zavareze, E. & Dias, A.R.G. (2015).
“Impact of Heat-Moisture Treatment on
Rice Starch, Applied Directly in Grain
Paddy Rice or in Isolated Starch” in
LWT-Food Science and Technology,
Vol. 60. No. 2 pp. 708-713.
[237] Huang, T.-T., Zhou, D.-N., Jin, Z.-Y.,
Xu, X.-M. & Chen,H.-Q. (2016). “Effect
of Repeated Heat-Moisture Treatments
on Digestibility, Physicochemical and
Structural Properties of Sweet Potato
Starch” in Food Hydrocolloids, Vol. 54
pp. 202-210.
[238] Chandla, N.K., Saxena, D. & Singh, S.
(2017). “Processing and Evaluation of
Heat Moisture Treated (HMT) Amaranth
Starch Noodles; An Inclusive
Comparison with Corn Starch Noodles”
in Journal of Cereal Science, Vol. 75 pp.
306-313.
[239] Huang, T.-T., Zhou, D.-N., Jin, Z.-Y.,
Xu, X.-M. & Chen,H.-Q. (2016). “Effect
of Repeated Heat-Moisture Treatments
on Digestibility, Physicochemical and
Structural Properties of Sweet Potato
Starch” in Food Hydrocolloids, Vol. 54
pp. 202-210.
[240] Gong, B., Xu, M., Li, B., Wu, H., Liu,
Y., Zhang, G., Ouyang, S. & Li, W.
(2017). “Repeated Heat-Moisture
Treatment Exhibits Superiorities in
Modification of Structural,
Physicochemical and Digestibility
Properties of Red Adzuki Bean Starch
Compared to Continuous Heat-Moisture
Way” in Food Research International,
Vol. 102 pp. 776-784.
[241] Deka, D. & Sit, N. (2016). “Dual
Modification of Taro Starch by
Microwave and Other Heat Moisture
Treatments” in International Journal of
Biological Macromolecules, Vol. 92 pp.
416-422.
[242] Zhu, B., Liu, J. & Gao, W. (2017).
“Process Optimization of Ultrasound-
Assisted Alcoholic-Alkaline Treatment
for Granular Cold Water Swelling
Starches” in Ultrasonics Sonochemistry,
Vol. 38 pp. 579-584.
[243] Molavi, H.,S. Razavi, M.A. & Farhoosh,
R. (2018). “Impact of Hydrothermal
Modifications on The Physicochemical,
Morphology, Crystallinity, Pasting and
Thermal Properties of Acorn Starch” in
Food Chemistry, Vol. 245 pp. 385-393.
[244] Tokita, N., Miyata, S., Nakiri, S. &
Tokita, T. (2015). “Morphological
Development and Starch Accumulation
of Konara Oak (Quercus serrata)
Acorns as A Wildlife Food Source” in
Asian Journal of Plant Science and
Research, Vol. 5. No. 3 pp. 17-23.
[245] Korus, J., Witczak, M., Ziobro, R. &
Juszczak, L. (2015). “The Influence of
Acorn Flour on Rheological Properties
of Gluten-Free Dough and Physical
Characteristics of The Bread” in
European Food Research and
Technology, Vol. 240. No. 6 pp. 1135-
1143.
[246] Zhao, Y., Jiang Y., , Zheng, B., Zhuang,
W., Zheng, Y. and Tian, Y. (2017).
“Influence of Microwave Vacuum
Drying on Glass Transition
Temperature, Gelatinization
Temperature, Physical and Chemical
Qualities of Lotus Seeds” in Food
Chemistry, Vol. 228 pp. 167-176.
[247] Nawaz, H., Shad, M.A., Saleem, S.,
Khan, M.U.A., Nishan, U., Rasheed, T.,
Bilal, M. & Iqbal, H.M. (2018).
“Characteristics of Starch Isolated from
Microwave Heat Treated Lotus
(Nelumbo nucifera) Seed Flour” in
International Journal of Biological
Macromolecules, http:// doi:10.1016/
j.ijbiomac.2018.02.125.[248] Zeng,
S., Chen, B., Zeng, H., Guo, Z., Lu, X.,
Zhang, Y. & Zheng, B. (2016). “Effect
of Microwave Irradiation on The
Physicochemical and Digestive
Properties of Lotus Seed Starch” in
Journal of Agricultural and Food
Chemistry, Vol. 64. No. 12 pp. 2442-
2449.
[249] Prompiputtanapon, K. & Tongta, S.
(2015). “Modification of Tapioca Starch
Granule Surfaces on Soluble Fiber
Formation” in Journal of Food Science
and Agricultural Technology (JFAT),
Vol. 1 pp. 116-121.
Journal of Science and Technology, Vol. 10 No. 2 (2018) p. 144-174
174
[250] Wongsagonsup, R., P., Deeyai, W.,
Chaiwat, S., Horrungsiwat, K.,
Leejariensuk, M., Suphantharika, A.
Fuongfuchat, & S. Dangtip, (2014).
“Modification of Tapioca Starch by
Non-Chemical Route Using Jet
Atmospheric Argon Plasma” in
Carbohydrate Polymers, Vol. 102 pp.
790-798.
[251] Xing, J.-j., Liu, Y., Li, D., Wang, L.-J.
and Adhikari, B. (2017). “Heat-Moisture
Treatment and Acid Hydrolysis of Corn
Starch in Different Sequences” in LWT-
Food Science and Technology, Vol. 79
pp. 11-20.
[252] Morell, P., Hernando, I., Llorca, E. &
Fiszman, S. (2015). “Yogurts With An
Increased Protein Content and
Physically Modified Starch:
Rheological, Structural, Oral Digestion
and Sensory Properties Related to
Enhanced Satiating Capacity” in Food
Research International, Vol. 70 pp. 64-
73.
[253] Luchese, C.L., Frick, J.M., Patzer, V.L.,
Spada, J.C. & Tessaro, I.C. (2015).
“Synthesis and Characterization of
Biofilms Using Native and Modified
Pinhão Starch” in Food Hydrocolloids,
Vol. 45 pp. 203-210.
[254] Oyeyinka, S.A., R., Adegoke, A.T.,
Oyeyinka, K. O., Salami, O.F.,
Olagunju, F.L., Kolawole, J.K. Joseph,
& I.F. Bolarinwa, (2018). “Effect of
Annealing on The Functionality of
Bambara Groundnut (Vigna
subterranea) Starch–Palmitic Acid
Complex” in International Journal of
Food Science and Technology, Vol. 53.
No. 2 pp. 549-555.
[255] Alimi, B.A., T.S. Workneh, & M.O.
Oke, (2016). “Effect of Hydrothermal
Modifications on The Functional,
Pasting and Morphological Properties of
South
African Cooking Banana and Plantain”
in CyTA-Journal of Food, Vol. 14. No. 3
pp. 489-495.
[256] Hoyos‐Leyva, J.D., Bello‐Pérez, L.A.,
Agama‐Acevedo, E. & Alvarez‐
Ramirez, J. (2015). “Optimising The
Heat Moisture Treatment of Morado
Banana Starch by Response Surface
Analysis” in Starch
‐
Stärke, Vol. 67. No.
11-12 pp. 1026-1034.
[257] Alimi B.A., Workneh, T.S. & Sibomana,
M.S. (2016). “Effect of Hydrothermal
Modifications on Functional, Pasting
and Structural Properties of False
Banana (Ensete ventricosum) Starch” in
Food Biophysics, Vol. 11. No. 3 pp.
248-256.
[258] Li, Y., Ding, G., Yokoyama, W. &
Zhong, F. (2018). “Characteristics of
Annealed Glutinous Rice Flour and Its
Formation of Fast-Frozen Dumplings” in
Journal of Cereal Science, Vol. 79 pp.
106-112.
[259] Ali, T.M. & Hasnain, A. (2016). “Effect
of Annealing on Morphological and
Functional Properties of Pakistani White
Sorghum (Sorghum bicolor) Starch” in
Journal of Basic and Applied Sciences,
Vol. 12 pp. 358-364.
[260] Astuti, R.M., Asiah, N., Setyowati, A. &
Fitriawati, R. (2018). “Effect of Physical
Modification on Granule Morphology,
Pasting Behavior, and Functional
Properties of Arrowroot (Marantha
arundinacea L.) Starch” in Food
Hydrocolloids.