Content uploaded by Bradley M. Wetherbee
Author content
All content in this area was uploaded by Bradley M. Wetherbee on Feb 28, 2017
Content may be subject to copyright.
Accepted by M.R. de Carvalho: 19 Jan. 2017; published: 28 Feb. 2017
ZOOTAXA
ISSN 1175-5326 (print edition)
ISSN
1175-5334
(online edition)
Copyright © 2017 Magnolia Press
Zootaxa 4237 (2): 371
–
382
http://www.mapress.com/j/zt/
Article
371
https://doi.org/10.11646/zootaxa.4237.2.10
http://zoobank.org/urn:lsid:zoobank.org:pub:43FE1ADD-00F5-4A65-B878-3EF231A03A2B
Etmopterus lailae sp. nov., a new lanternshark (Squaliformes: Etmopteridae)
from the Northwestern Hawaiian Islands
DAVID A. EBERT
1,2,3,7
,YANNIS P. PAPASTAMATIOU
4
,
STEPHEN M. KAJIURA
5
& BRADLEY M. WETHERBEE
6
1
Pacific Shark Research Center, Moss Landing Marine Laboratories, 8272 Moss Landing Road, Moss Landing, CA 95039, USA.
E-mail: debert@mlml.calstate.edu
2
Research Associate, South African Institute for Aquatic Biodiversity, Private Bag 1015, Grahamstown, 6140, South Africa
3
Research Associate, Department of Ichthyology, California Academy of Sciences, 55 Music Concourse Drive, San Francisco, CA,
94118, USA
4
Department of Biological Sciences, Florida International University, North Miami, Florida 33181, USA
5
Department of Biological Sciences, Florida Atlantic University, Boca Raton, Florida 33431, USA
6
Department of Biological Sciences, University of Rhode Island, Kingston, Rhode Island 02881, USA and Guy Harvey Research Insti-
tute, Nova Southeastern University, Ft. Lauderdale, FL., USA
7
Corresponding author
Abstract
A new species of lanternshark, Etmopterus lailae (Squaliformes: Etmopteridae), is described from the Northwestern Ha-
waiian Islands, in the central North Pacific Ocean. The new species resembles other members of the “Etmopterus lucifer”
clade in having linear rows of dermal denticles, and most closely resembles E. lucifer from Japan. The new species occurs
along insular slopes around seamounts at depths between 314–384 m. It can be distinguished from other members of the
E. lucifer clade by a combination of characteristics, including a longer anterior flank marking branch, arrangement of der-
mal denticles on the ventral snout surface and body, flank and caudal markings, and meristic counts including number of
spiral valve turns, and precaudal vertebrate. A key to species of the Etmopterus lucifer-clade is included.
Key words: Chondrichthyes, elasmobranch, E. lucifer clade, new species, central North Pacific Ocean
Introduction
The genus Etmopterus Rafinesque, 1810 (Squaliformes: Etmopteridae) is one of the most species rich shark genera
with approximately 38 valid species, of which 11 have been described since 2002 (Ebert, 2015; Ebert et al., 2013,
2016). Most of these new Etmopterus species have been from the western Indo-Pacific and southern African
regions (Ebert et al. 2013). In the central North Pacific four Etmopterus species have been reported, all from the
Hawaiian Islands and associated seamounts (Crow & Crites, 2002; Mundy, 2005). These include E. bigelowi Shirai
& Tachikawa, 1993, E. lucifer Jordan & Snyder, 1902, E. pusillus (Lowe, 1839), and the poorly known E. villosus
Gilbert, 1905.
Records of an Etmopterus species tentatively identified as E. lucifer from throughout the Hawaiian Islands
through the Hancock Seamount are common, but Mundy (2005) commented that the occurrence of this species
from this region required confirmation. During the course of examining Etmopterus species collected in Hawaiian
waters, now in the fish collection at the Bernice P. Bishop Museum (BPBM), it was determined that three
individuals previously identified as E. lucifer represent a distinctly different species from E. lucifer found in
Japanese waters. Here we describe this new species, Etmopterus lailae, from Hawaiian waters.
EBERT ET AL.
372
·
Zootaxa 4237 (2) © 2017 Magnolia Press
Materials and methods
The holotype and two paratypes were measured externally following Ebert et al. (2011) and meristics, including
tooth, spiral valve, and vertebral counts, were taken. Holotype values are followed in parentheses by a range of
paratype values. Comparative material was examined from collections at the Australian Museum, Sydney (AMS),
Bavarian State Collection of Zoology (ZSM), BPBM, Natural History Museum (BMNH), California Academy of
Sciences (CAS), Commonwealth Scientific and Industrial Research Organization, Division of Marine and
Atmospheric Research (CSIRO), South African Institute for Aquatic Biodiversity (SAIAB), Iziko-South African
Museum (iSAM), United States National Museum of Natural History, Smithsonian Institution, Washington DC
(USNM), and Zoological Museum Hamburg (ZMH). Institutional abbreviations follow Sabaj (2016).
Genus Etmopterus Rafinesque, 1810
Etmopterus Rafinesque, 1810: 14. Type species: Etmopterus aculeatus Rafinesque, 1810 by monotypy.
Etmopterus lailae, new species
Laila’s Lanternshark
(Figures 1–3a, 4–5, Table 1)
Holotype. BPBM 40183, 368 mm TL, immature male, R/V Townsend Cromwell cruise 8805, leg 2, station 216,
Koko Seamount, 35° 16.48´N 171° 17.13´E to 35° 16.55´N 171° 17.20´E, 314–358 m, 13 August 1988.
Paratypes. BPBM 40174, 303 mm TL, immature male, R/V Townsend Cromwell cruise 8805, leg 2, station
167, South Kanmu Seamount, 32° 03´N 173° 04´E to 32° 02´N 173° 06´E, 336–338 m, 6 August 1988; BPBM
40182, 265 mm TL, immature male, R/V Townsend Cromwell cruise 8805, leg 2, station 218, Koko Seamount, 35°
17.05´N 171° 22.01´E to 35° 17.05´N 171° 21.54´E, 368–384 m, 14 August 1988.
Diagnosis. Etmopterus lailae is a moderately large, slender species of linear–denticled Etmopterus that can be
separated from most of its congeners within the E. lucifer clade by the length of its anterior flank marking branch
being much longer relative to its posterior branch; all other members of this genus, except for two species, have a
posterior branch that is equal to or longer than the anterior branch. The only two species with an anterior branch
relatively longer than the posterior branch, E. lucifer Jordan & Snyder, 1902 and E. sculptus Ebert, Compagno, &
De Vries, 2011, can be separated from the new species by a lower spiral valve count (8–9 vs 14–16 for E. lailae), a
slightly higher precaudal vertebral count (55–64 vs 53–57), and a higher number of teeth on the lower jaw (30–43
vs 26–28). Etmopterus lailae lacks dermal denticles between the nostrils on the ventral snout surface and on the
dorsal fins, while the other two species have denticles present on the snout and dorsal fins.
Description. Proportional measurements expressed as a percentage of total length (TL) are given for the
holotype and the range for two paratypes (Table 1).
Body fusiform, trunk sub-cylindrical, width 1.2 (0.7–1.0) in trunk height; head sub-conical, moderate-sized,
length 14.9 (13.9–16.2)% TL, slightly depressed, height 1.6 (1.3–1.6) times width. Snout moderately long,
triangular–shaped becoming rounded at snout–tip in dorsal view, slightly depressed in lateral view, head width 11.1
(9.2–10.9)% TL. Eyes oval-shape, large, length 2.9 (2.6–3.3) in head, 1.9 (1.6–1.8) times width of eye; orbits with
anterior and posterior notches; inter–orbital space 1.6 (1.3–1.5) in width of head; eye length 1.3 (1.4–1.5) times in
inter–orbital distance. Spiracles small, greatest diameter 1.9 (1.3–1.5)% TL, 2.7 (3.3–4.0) times into length of eye,
distance to eye 2.4 (2.6)% TL, eye–spiracle length 0.9 (0.9) times into height of eye. Nostrils large, oblique, length
1.4 (1.5–1.6) times into internarial width, 2.7 (2.6–2.7) times eye diameter; anterior nasal flap well developed,
triangular, anterior tip extending across nasal opening, length 0.6 (0.5) times into spiracle length. Gill openings
small, slightly oblique, in horizontal series, height decreasing progressively posteriorly, first two openings
noticeably larger than last three openings, fifth opening just in front of pectoral fin origin; height of first gill slit 1.8
(1.3–1.8) in height of fifth gill opening; inter-gill length about equal, 1.1 (1.2–1.3) times, to length of eye. Mouth
broad, length 4.0 (3.0–3.3) times width, slightly arched, width 0.7 (0.6) in preoral length.
Zootaxa 4237 (2) © 2017 Magnolia Press
·
373
A NEW LANTERNSHARK FROM HAWAII
TABLE 1. Morphometrics and meristics of Etmopterus lailae holotype (BPBM 40183) and two paratypes (BPBM
40174; BPBM 40182). Values expressed as percent TL.
Measurement Holotype Paratypes
Total length (mm) 368 265–303
Precaudal length 80.4 75.5–78.5
Prenarial length 2.4 2.3–2.3
Preoral length 10.6 10.9–11.2
Preorbital length 6.5 5.3–5.9
Prespiracle length 13.0 12.8–13.9
Pregill length 19.0 18.1–18.8
Head length 14.9 13.9–16.2
Prepectoral length 23.9 21.8–22.6
Prepelvic length 53.3 48.3–50.8
Snout–vent length 57.6 52.1–54.5
Pre–first dorsal fin length 35.1 32.8–33.3
Pre–second dorsal fin length 61.4 56.6–57.4
Interdorsal fin length 22.0 18.1–20.1
Dorsal–caudal length 12.0 10.6–10.9
Pectoral–pelvic length 22.3 21.5–24.4
Pelvic–caudal length 17.1 16.2–19.2
Eye length 5.2 4.9–5.3
Eye height 2.7 3.0–3.0
Interorbital length 6.8 7.2–7.3
Nostril width 1.9 1.9–2.0
Internarial length 2.7 3.0–3.0
Anterior nasal flap length 1.1 0.7–0.8
Spiracle length 1.9 1.3–1.5
Eye–spiracle length 2.4 2.6–2.6
Mouth length 1.9 2.0–2.3
Mouth width 7.6 6.6–6.8
Upper labial furrow 1.6 2.3–2.3
Lower labial furrow 1.6 1.3–1.9
First gill height 1.9 1.9–2.3
Second gill height 1.6 1.5–2.0
Third gill height 1.1 1.5–1.7
Fourth gill height 1.1 1.3–1.5
Fifth gill height 1.1 1.3–1.5
Head height 7.1 6.8–6.9
Head width 11.1 9.2–10.9
Pectoral fin length 9.0 8.3–8.3
Pectoral fin anterior margin length 7.9 8.3–8.6
Pectoral fin base length 4.6 4.3–4.9
Pectoral fin height 6.8 4.6–7.2
Pectoral fin inner margin length 5.2 4.5–5.0
Pectoral fin posterior margin length 6.5 4.6–7.2
Pelvic fin length 11.1 8.6–10.6
Pelvic fin anterior margin length 4.9 5.3–6.0
Pelvic fin base length 6.5 5.3–6.8
Pelvic fin height 1.9 2.0–2.6
Pelvic fin inner margin length 5.4 3.3–4.2
Pelvic fin posterior margin length 6.0 4.0–6.4
First dorsal fin length 9.0 7.9–8.6
First dorsal fin spine length Broken 3.0–3.4
First dorsal fin spine exposed length Broken 1.7–1.9
First dorsal fin anterior margin length 3.8 4.5–4.6
First dorsal fin base length 5.2 5.3–5.3
First dorsal fin height 2.4 1.5–2.6
......continued on the next page
EBERT ET AL.
374
·
Zootaxa 4237 (2) © 2017 Magnolia Press
TABLE 1. (Continued)
Measurement Holotype Paratypes
First dorsal fin inner margin length 4.1 3.4–3.6
First dorsal fin posterior margin length 3.5 2.6–3.3
Second dorsal fin length 13.0 12.5–13.2
Second dorsal fin spine length Broken 6.9–7.5
Second dorsal fin spine exposed length Broken 4.2–4.3
Second dorsal fin anterior margin length 7.1 6.3–6.4
Second dorsal fin base length 7.6 7.9–9.4
Second dorsal fin height 4.3 3.3–4.5
Second dorsal fin inner margin length 5.7 5.7–5.9
Second dorsal fin posterior margin length 7.1 4.6–6.0
Caudal fin dorsal margin 17.7 18.5–23.1
Caudal fin fork width 6.8 6.6–7.2
Caudal fin preventral margin 7.6 7.2–8.9
Caudal fin lower postventral margin 2.7 1.3–3.0
Caudal fin upper postventral margin 8.4 6.9–9.4
Caudal fin subterminal margin 3.0 2.6–4.0
Caudal fin terminal margin 3.0 3.4–5.0
Caudal fin terminal margin 3.5 4.5–6.9
First dorsal fin midpoint to pectoral fin insertion 6.3 7.3–8.7
First dorsal fin midpoint to pelvic fin origin 17.7 13.2–15.8
Pelvic fin midpoint to first dorsal fin insertion 15.5 14.7–16.2
Pelvic fin midpoint to second dorsal fin origin 4.6 2.0–3.0
Flank marking anterior branch 11.1 9.6–10.4
Flank marking posterior branch 6.3 6.3–7.9
Flank marking base 1.8 1.9–2.0
Central caudal marking 6.0 6.3–6.8
Upper caudal marking 7.1 6.6–6.8
FIGURE 1. Etmopterus lailae new species, immature male holotype (BPBM 40183).
Zootaxa 4237 (2) © 2017 Magnolia Press
·
375
A NEW LANTERNSHARK FROM HAWAII
FIGURE 2. Tooth morphology of upper and lower teeth of immature male holotype (BPBM 40183).
Teeth dissimilar in upper and lower jaw (Fig. 2); upper jaw teeth with strong central cusp flanked on each side
by two smaller lateral cusplets, less than one-half the height of median cusp, and decreasing in size distally; lower
jaw teeth unicuspid, blade-like, oblique, fused into a single row. Tooth count in first row of upper jaw 24 (22–24)
and in first row of lower jaw 28 (26–26).
First dorsal fin small, length of first dorsal fin 9.0 (7.9–8.6)% TL, anterior margin slightly curved, rounded at
apex, origin slightly behind pectoral fin free rear tip; fin base insertion well forward of pelvic-fin origin; pre–first
dorsal length 1.6 (1.7–1.8) in inter–dorsal distance; first dorsal–fin spine nearly straight, short, (0.4–0.9) times into
height of first dorsal fin, located posterior to pectoral fin posterior margin. Second dorsal fin noticeably larger than
first dorsal fin, length of first dorsal fin 0.7 (0.6–0.7) into second dorsal fin, height of first dorsal fin (0.5–0.6) into
second dorsal fin; apex broadly rounded, posterior margin concave, free rear tip elongated, length 13.0 (12.5–
13.2)% TL, pre–second dorsal length 2.8 (2.9–3.1) in inter–dorsal distance; second dorsal–fin spine large, height
about equal to or slightly higher than fin height, slightly curved near tip towards fin apex; origin behind over or
slightly behind pelvic fin free rear tips. Interspace between first and second dorsal fins 2.8 (2.9–3.1) times into pre–
pectoral length.
Pectoral fin length 9.0 (8.3)% TL, broadly rounded at free rear tips, base into anterior margin length ratio 1.7
(1.7–2.0), posterior margin nearly straight edged. Caudal peduncle rounded, relatively short, 12.0 (10.6–10.9)%
TL, and tapering posteriorly; height slightly greater than width, 1.3 (1.0–1.4) times width; distance less than upper
caudal fin length. Caudal fin elongated, slightly greater than head length, sub–terminal notch conspicuous;
preventral caudal fin margin 2.4 (3.2–3.0) into dorsal caudal fin margin.
Dermal denticles on dorsal body surface erect, thorn-like, curved rearwards, in distinct longitudinal rows
extending from dorsal head surface to caudal fin; distance between rows appear to decrease behind pelvic fin
insertions to caudal fin. Ventral snout surface with prominent pores (ampullae of Lorenzini) surrounded by dermal
denticles, except for bare patch between nostrils and extending just behind posterior nostril edges; area above upper
lip of jaw without dermal denticles (Fig. 3a). Dorsal fins mostly naked, without dermal denticles extending on fin
base or ceratotrichia.
EBERT ET AL.
376
·
Zootaxa 4237 (2) © 2017 Magnolia Press
FIGURE 3. Dermal denticle arrangement on ventral snout surface of (a) Etmopterus lailae new species (holotype BPBM
40183) and (b) E. lucifer (syntype, CAS-SU 6863). Arrows denote areas of presence (E. lucifer) or absence (E. lailae) of
dermal denticles.
Luminescent markings distinct, covering ventral head surface, extending to level of nostrils and at about
orbital anterior notch, descending below eye level to mouth, then extending upward over mouth corners, but not
encircling mouth; discontinuous with belly marking posterior to mouth at about first gill openings, demarcated by a
faint band of transverse dermal folds across throat extending from below lower edges of first and second gill
openings on either side.
Belly marking originates behind mouth on posterior portion of transverse dermal folds and extends ventrally
along pectoral fin bases slightly extending upwards to about level with fin base insertion, about level with ventral
edges of gill openings, and posteriorly to pelvic fin bases; ventral surface of pectoral fin with two very dark lobe-
shaped markings, one at fin origin and another at insertion, each extending from fin base to origin of ceratotrichia
bisected by distinct lighter band forming a two–prong fork pattern; margin on pectoral–pelvic space clearly
demarcated, line extending from rear margin of pectoral–fin insertion nearly to pelvic–fin origin except for lighter
space at pelvic–fin origin; dark ventral belly surface terminates under free rear inner margin of second dorsal fin;
ventral caudal peduncle surface with darker marking just behind cloaca and extending about halfway to lower
caudal origin (Fig. 4).
Flank markings distinctive, with anterior and posterior branches present; anterior branch slender, curving
slightly over pelvic fins with a downward concavity, thin proximally near marking base, thickening medially
before narrowing to acute tip distally; length relatively long, 11.1 (9.6–10.4)% TL as measured from marking base
to tip, extending beyond origin of pelvic–fin; posterior branch nearly straight, relatively thick, length less than
anterior branch, 6.3 (6.3–7.9)% TL, extending just beyond second dorsal fin base insertion, terminating below and
before midpoint of inner fin margin; base of flank marking relatively narrow, origin posterior to pelvic fin insertion.
Zootaxa 4237 (2) © 2017 Magnolia Press
·
377
A NEW LANTERNSHARK FROM HAWAII
Caudal central marking distinct, thick, ovoid-shaped, length 6.0 (6.3–6.8)% TL, longer than base width of flank
marking. Caudal fin upper marking very narrow, its length 1.2 (1.0–1.1) times central caudal marking.
Vertebral counts: total vertebral counts 86 (79–82); monospondylous 40 (40); diplospondylous 17 (13–15);
total precaudal 57 (53–55); caudal 29 (26–27). Spiral valve count is 16 (14–16).
FIGURE 4. Ventral flank marking between pelvic fins and lower caudal origin of Etmopterus lailae new species (holotype
BPBM 40183).
Coloration. After preservation dorsal and lateral surface a light to medium brown, except for prominent dark
brown lateral and caudal markings, ventral surfaces also a dark brown; transition between lateral and ventral
surfaces sharply demarcated. Body with 1 to 3 rows of prominent dark photophores extending from head
posteriorly along flanks to about upper caudal origin; an irregular row of dark photophores also extending between
pectoral and pelvic fins. Ventral surface a dark brown to blackish around mouth, belly, between pelvic fin origins
and lower caudal origin; area around mouth distinctly dark brownish, sharply contrasting the lighter brown snout;
area across throat slightly lighter than area anterior and posterior to this region. Gills and area just below darker
than lighter brown area above. Pectoral and pelvic fin bases light brown above, darker below, and with blackish
posterior and inner margins; remainder of fins becoming translucent. Dorsal fins light brown at base, becoming
lighter to translucent. Lateral and caudal flank markings prominent, sharply demarcated, but without lighter
colored lateral flanks. Caudal fin after preservation lacks vertical dark bar or any noticeable markings except for
upper caudal marking.
Size. Maximum length is at least 370 mm TL (holotype: BPBM 40183) for an immature male, both paratypes
are immature males; females were not available for examination.
Distribution. The new species presently is known only from the Koko and South Kanmu seamounts,
Northwestern Hawaiian Islands, and at a depth range of 314–384 m (Fig. 5).
Etymology. The new species is named after Laila Mostello-Wetherbee, shark enthusiast and daughter of co-
author Brad Wetherbee. The proposed common name is Laila’s Lanternshark.
Comparisons. Etmopterus lailae can be assigned to the “E. lucifer clade” as defined by Straube et al. (2010)
with its predominant lateral flank markings displaying conspicuous anterior and posterior branches. The members
EBERT ET AL.
378
·
Zootaxa 4237 (2) © 2017 Magnolia Press
of this group are also referred to as linear denticle etmopterids due to the characteristic arrangement of distinct
linear rows of denticles on the dorsal head surface that also extends to the flanks, caudal peduncle and caudal base.
The “E. lucifer clade” can further be subdivided into three distinct subgroups based on the relative lengths of the
lateral flank marking branches (Ebert et al., 2016); anterior flank marking branch longer than posterior, anterior
branch shorter than posterior, and anterior and posterior branches relatively equal in length. Eleven Etmopterus
species are currently recognized to fall within the “E. lucifer clade”, of which six species (E. alphus Ebert, Straube,
Leslie & Weigmann, 2016, E. brachyurus Smith & Radcliffe, 1912, E. bullisi Bigelow & Schroeder, 1957, E.
decacuspidatus Chan, 1966, E. dislineatus Last, Burgess, & Séret, 2002, and E. molleri Whitley, 1939) have an
anterior flank branch that is shorter than the posterior, and three species (E. burgessi Schaaf-DaSilva & Ebert,
2006, E. evansi Last, Burgess, & Séret, 2002, and E. pycnolepis, Kotlyar, 1990) have anterior and posterior branch
lengths that are about equal in length (Ebert et al., 2011, 2016). The remaining two species, E. lucifer and E.
sculptus Ebert, Compagno, & De Vries, 2011, each has an anterior branch length that is longer than the posterior,
and appear to be closest to E. lailae based on the relative branch lengths of flank markings (Ebert et al. 2011).
FIGURE 5. Distribution map of Hawaiian Etmopterus species.
Etmopterus lailae can be separated from its two closest congeners by a combination of external morphological
and internal meristic characteristics. Externally, E. lailae can be separated from E. sculptus by a shorter posterior
flank branch marking (6.3–7.9 vs 7.5–8.6)% TL; a longer central caudal marking (6.0–6.8 vs 3.4–5.0)% TL; central
caudal marking length 3.3–3.6 vs 1.4–1.9 times flank base marking width; and a shorter upper caudal marking
(1.1–1.2 vs 2.0–2.5) relative to the central caudal marking. The ventral snout surface of E. lailae between the
nostrils is bare, but posteriorly has dermal denticles surrounding tiny pores (ampullae of Lorenzini), while E.
sculptus is rather uniformly covered with dermal denticles, with small naked patches along the upper lips, and
around and between the nostrils. Internally, E. lailae compared to E. sculptus has a higher spiral valve turn count
(14–16 vs 8–9), a lower precaudal vertebral count (53–57 vs 60–64), and a lower tooth count on the lower jaw (26–
28 vs 36–43). The biogeography is also informative since E. lailae is only known from the north central Pacific
Ocean, while E. sculptus occurs from off Namibia to southern Mozambique in the southern hemisphere (Ebert et
al., 2011).
The closest congener geographically and morphologically to E. lailae is the Japanese E. lucifer, but these two
species can be separated by a combination of meristic and external morphological characteristics. Etmopterus
lailae can be separated meristically from Japanese E. lucifer by having a higher spiral valve turn count (14–16 vs
8–9), a lower tooth count on the lower jaw (26–28 vs 30–39), and an overlapping although slightly lower precaudal
Zootaxa 4237 (2) © 2017 Magnolia Press
·
379
A NEW LANTERNSHARK FROM HAWAII
vertebral count (53–57 vs 55–63) and a lower total vertebral count (79–86 vs 85–90), although it should be noted
that precaudal and total vertebral counts vary widely depending on the region and within some regions (Last &
Stevens, 2009; Last & Stewart, 2015). For example, Yamakawa et al. (1986) based on 65 Japanese E. lucifer
specimens reported a range of 55–62 precaudal vertebral, while we found the range for five Japanese E. lucifer to
be 59–63. Although Yamakawa et al. (1986) did not report on the number of total vertebrae from their study, we
found this number to range from 85–90 based on five Japanese E. lucifer specimens, while E. lailae had a range of
79–86.
Etmopterus lailae can be separated from E. lucifer by the following body ratios: mouth width shorter (6.6–7.6
vs 7.4–10.1)% TL; pre-pectoral length slightly shorter (21.8–22.6 vs 22.6–25.3)% TL; pectoral pelvic space shorter
(21.5–24.4 vs 24.2–33.2)% TL; anterior pectoral fin length shorter (7.9–8.6 vs 8.8–11.0)% TL; first dorsal fin
length longer (7.9–9.0 vs 5.4–8.0)% TL; second dorsal fin height relatively low, its height 26.3–34.3 vs 34.5–
41.9% TL of its overall length. The flank markings are also informative in separating these two species: E. lailae
when compared to E. lucifer has a shorter anterior flank marking branch (9.8–12.6% vs 12.7–14.0)%; a lateral
flank marking base width that is slightly narrower (1.8–2.0% vs 2.1–2.5%); a slightly narrower flank base width
9.2–9.3 vs 9.6–13.9; a longer central caudal marking (6.0–6.8% vs 2.8–5.1%); central caudal marking length 3.3–
3.6 vs 2.5–2.7 times flank base marking width.
The arrangement of the dermal denticles, including their presence or absence, is informative when separating
E. lailae from E. lucifer. The ventral snout surface of E. lailae has a naked patch between, and extending just
posterior to, the space between the inner nostrils (Fig. 2a). Also, beginning just posterior to the inner nostril
opening is a bare patch, absent dermal denticles, extending rearwards to the upper lip except for small patch of
denticles bisecting it about one-third the distance from the inner nostril opening to the upper lip; this area has
several large pore openings. The area just anterior to the upper lip of the jaw, and traversing its length, also has a
bare area with a few large scattered pores. Distinct pores cover the remainder of the snout ventral surface. In
contrast, the snout ventral surface of E. lucifer is densely and relatively evenly covered by dermal denticles, but has
no bare patches, except along the upper lip (Fig. 2b); some small pores are apparent, but scattered. The dorsal fins
of E. lailae are mostly naked, without dermal denticles extending onto the dorsal fins, while E. lucifer has linear
rows of denticles present on the bases and extending onto the dorsal fins, including the ceratotrichia. The lateral
dermal denticles extending the length of the body on E. lailae appear more sculpted than observed in E. lucifer.
In addition to the above parameters these two species differ significantly in the size at maturity. All three
known specimens of E. lailae are immature males, with the largest measuring 368 mm TL after preservation (370
mm TL before preservation), while E. lucifer from Japanese waters is a much smaller species with males maturing
(before preservation) at a minimum length of 278 mm TL, with a maximum of 310 mm TL, based on the
individuals examined in this study.
The separation of “E. lucifer clade” etmopterids, including the new species E. lailae, is complicated due to the
inadequate original description of E. lucifer from Japan and the convoluted taxonomic history of this species from
Japanese waters and elsewhere. The original description and type series of E. lucifer was based on a combination of
two different etmopterid species, one form with an anterior branch longer than the posterior, and the other with the
posterior branch being longer than the anterior. Examination of several of the syntypes by DAE and J.A. Schaaf-Da
Silva (California Department Fish & Wildlife) confirms that two different species are among the type series.
Furthermore, a lectotype has never been designated for the species, thus leaving open the question of what species
exactly constitutes true E. lucifer, and leaves unresolved the status of the other species comprising the type series.
Resolution to, and a description of, true E. lucifer with a lectotype designation are currently under investigation by
DAE and N. Straube (Bavarian State Collection of Zoology).
Key to the Etmopterus lucifer-clade of Lanternsharks:
1a. Lateral flank marking anterior and posterior branches nearly equal in length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.
1b. Lateral flank marking anterior and posterior branches dissimilar in length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.
2a. Caudal fin without dark band at fin tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E. burgessi. (Western North Pacific: Taiwan)
2b. Caudal fin with dark band at fin tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.
3a. Caudal peduncle with dark saddle; caudal fin with dark band across middle of upper lobe and at fin tip. . . .Etmopterus evansi.
(Eastern Indian Ocean: off northern Western Australia, Arafura Sea and Timor Sea)
EBERT ET AL.
380
·
Zootaxa 4237 (2) © 2017 Magnolia Press
3b. Caudal peduncle without dark saddle; caudal fin without dark band across middle of upper lobe and at fin tip. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus pycnolepis. (Southeastern Pacific: Nazca and Sala y Gomez submarine ridges)
4a. Lateral flank marking anterior branch noticeably shorter than posterior branch in length. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.
4b. Lateral flank marking anterior branch noticeably longer than posterior branch in length . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.
5a. Posterior branch of lateral flank marking extends past second dorsal fin free rear tip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.
5b. Posterior branch of lateral flank marking extends does not past second dorsal fin free rear tip. . . . . . . . . . . . . . . . . . . . . . . . . 8.
6a. Flanks with elaborate pattern of conspicuous rows of dark dots and dashes.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus dislineatus (Southwestern Pacific: off northern Queensland, Australia).
6b. Flanks without elaborate pattern of conspicuous rows of dark dots and dashes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.
7a. Anterior (6.0–10.6%) and posterior (9.3–12.7%) flank branches relatively shorter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus alphus (Southwestern Indian Ocean).
7b. Anterior (8.0–11.5%) and posterior (11.0–15.4%) flank branches relatively longer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus molleri (Western Pacific: eastern Australasia to New Zealand).
8a. Upper teeth with 4 or 5 pairs of cusplets on each side; dermal denticles not arranged in rows.. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus decacuspidatus (Western North Pacific: South China Sea).
8b. Upper teeth with less than 4 or 5 pairs of cusplets on each side; dermal denticles arranged in rows. . . . . . . . . . . . . . . . . . . . . 9.
9a. Color light above and conspicuously dark below. Caudal and flank photomarks conspicuous. Denticles closely spaced with
low, hooked conical crowns. . . . . . . . . . . . Etmopterus brachyurus (Western Pacific: Japan to Philippines, possibly Australia).
9b. Color uniformly dark. Caudal and flank photomarks obscure. Denticles widely spaced with high, hooked conical crowns. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus bullisi (Western Atlantic).
10a. Body slender; ventral snout surface between nostrils bare, without dermal denticles; central caudal marking length 6 %TL or
more. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus lailae n. sp. (Central North Pacific: Hawaiian Islands).
10b. Body stout; ventral snout surface between nostrils uniformly covered with dermal denticles, and depending on the species may
or may not have small bare patches; central caudal marking length less than 5.1 %TL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.
11a. Flank marking anterior branch nearly twice the length of the posterior branch; area between nostrils without small bare
patches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Etmopterus lucifer (Central North Pacific: Hawaiian Islands).
11b. Flank marking anterior branch only slightly longer than posterior branch; area between nostrils with small bare patches. . . . . .
. . . . . . . . . . . . . . . Etmopterus sculptus (Southeast Atlantic and Southwest Indian Ocean: Namibia to southern Mozambique).
Comparative material examined
Etmopterus alphus—Holotype, iSAM MB-F37564, adult male 325 mm TL, 18°14'S, 37°31'E, 472 m, 17 July
1994. Material information for 28 paratype specimens is listed in Ebert et al. (2016).
Etmopterus brachyurus—Holotype, USNM 70257, male, 186 mm TL, Jolo Island, Philippines; 17 specimens
(8 males, 267–305 mm TL and 9 females, 261–325 mm TL), collected by David A. Ebert, Ta–Chi, Taiwan (24° 53’
N, 122° 01’ E), April–May 1988.
Etmopterus burgessi—Holotype, CAS 223476, 355 mm TL, adult male, Ta-Chi, Taiwan, 24° 53' N, 122° 01'
E, collected by David A. Ebert, 11 May 1988; Paratypes (3 specimens), all collected at Ta-Chi, Taiwan, 24° 53' N,
122° 01' E. CAS 223477 (Fig. 2), adult female, 406 mm TL, 22 May 2005; CAS 223478, juvenile female, 241 mm
TL, 23 May 2005; CAS 223479, juvenile female, 239 mm TL, 21 May 2005.
Etmopterus dislineatus—Holotype, CSIRO H 1416-01, mature male, 445 mm TL; Paratype, CSIRO H 947-2,
female, 308 mm TL.
Etmopterus evansi—Holotype, CSIRO H 3141-06, female 270 mm TL, Rowley Shoals, Western Australia, 29
February 1992; Paratype, CSIRO H 3143-02, adult male 262 mm TL, north of Dampier Archipelago, Western
Australia, 10 March 1992; NTUM 10312, juvenile male 172 mm TL, Astrolabe Bay, Madang, Papua New Guinea,
520–575m depth, 14 December 2012; NTUM 10317, male 299 mm TL, east of Cape Croisiles, Madang, Papua
New Guinea, 680–689 m depth, 16 December 2012; ASIZ P. unreg (BIOPAPUA field code CP3689-1), adult male
343 mm TL, west of Manus Island, Papua New Guinea, 679–685 m depth, 29 September 2010; ASIZ P. unreg
(BIOPAPUA field code CP3713), female 177 mm TL, Astrolabe Bay, Madang, Papua New Guinea, 608–610 m
depth, 5 October 2010.
Etmopterus lucifer—Syntype, CAS-SU 6863, adult male, 278 mm in total length (TL), Misaki, Japan; CAS-
SU 23662, male, 308 mm TL, off Sandai, Japan; CAS-SU 26782; USNM 51282 (2 of 10 specimens), both males,
Misaki, Japan; USNM 161515, female, Sagami Bay, Japan.
Three specimens catalogued as Etmopterus lucifer at the CAS were examined and determined to have a longer
posterior flank marking relative to anterior flank marking. These specimens are CAS-SU 23779 (1 specimen),
Zootaxa 4237 (2) © 2017 Magnolia Press
·
381
A NEW LANTERNSHARK FROM HAWAII
female, 347 mm TL, off Sagami Nada, Japan, collector A. Owston, 21 March 1906; CAS-SU 11225 (2 specimens),
both female, 265–293 mm TL, off Misaki, Japan, collectors D.S. Jordan & J.O. Synder.
Etmopterus molleri—Holotype, AMS 5816, female, 295 mm BL, off New South Wales Australia; CSIRO H
7030-4, female, 374 mm TL, CSIRO H 7059-2, female, 390 mm TL.
Etmopterus sculptus—Holotype, SAM 37569, 442 mm TL, mature male, R/V Africana cruise 060,
mesopelagic survey, station A 6986 060 01-02B, 33° 22.9´S 17° 29.1´E, 552 m, 04 March 1988; Paratypes, SAM
33011, 498 mm TL, mature female, R/V Africana cruise 060, mesopelagic survey, station A6987 060 01-03B, 33°
34.6´S 17° 23.6´E, 718 m, 05 March 1988; SAM 37570 (2 specimens), 435 and 501 mm TL, mature male/mature
female, R/V Africana cruise 060, mesopelagic survey, station A 6986 060 01–02B, 33° 22.9´S 17° 29.1´E, 552 m,
04 March 1988; SAM 37571 (2 specimens), 474 and 495 mm TL, mature females, R/V Africana cruise 060,
mesopelagic survey, station A 6990 060 02-02B, 33° 18.6´S 17° 28.4´E, 480 m, 05 March 1988. ZMH
uncatalogued, 10 specimens, R/V Vityaz, cruise 17, stations 2637 (3 specimens), 2707 (1), 2735 (1), and 2765 (5).
Etmopterus villosus—Holotype, USNM-51583, 170 mm TL immature male, Albatross sta. 3824, off S. coast
of Molokai, Lae-o Ka Laau Light, 35° N, 6.1' W, 406–911 m.
Acknowledgements
The following individuals are thanked for their assistance and support: Robert Humphries of the NOAA Pacific
Islands Fisheries Science Center made available the specimens, which were collected during NOAA research
cruises. Arnold Suzumoto accessioned the specimens at the Bernice P. Bishop Museum. Dave Catania, Jon Fong
(California Academy of Sciences), Jeff Williams (United States National Museum, Smithsonian), Rob Leslie
(Department of Agriculture, Forestry, and Fisheries), Roger Bills, Alan Whitfield, and Paul Cowley (South African
Institute for Aquatic Biodiversity), Michael Bougaardt and Dylan Clarke (Iziko-South African Museum), Jayna
Schaaf-DaSilva (California Department Fish and Wildlife), and Nicolas Straube (Bavarian State Collection of
Zoology). DAE acknowledges support from NOAA/NMFS to the National Shark Research Consortium and Pacific
Shark Research Center, the David and Lucile Packard Foundation and Moss Landing Marine Laboratories.
References
Borets, L.A. (1986) Ichthyofauna of the northwestern and Hawaiian submarine ridges. Journal of Ichthyology, 26 (2), 208–220.
[in Russian. English translation, 1986, in J. Ichthyol, 26 (3), 1–13.]
Compagno, L.J.V. (1984) FAO species catalogue. Volume 4. Sharks of the world. An annotated and illustrated catalogue of
shark species known to date. Part 1. Hexanchiformes to Lamniformes. FAO [Food and Agriculture Organization of the
United Nations] Fisheries Synopsis, 125, 1–249.
Crow, G.L. & Crites, J. (2002) Sharks and rays of Hawaii. Mutual Publishing, Honolulu, HI, 203 pp.
Ebert, D.A. (2015) Deep-sea Cartilaginous Fishes of the Southeastern Atlantic Ocean. FAO Species Catalogue for Fishery
Purposes. No. 9. FAO, Rome, 251 pp.
Ebert, D.A., Compagno, L.J.V. & DeVries, M.J. (2011) A new lantershark (Squaliformes: Etmopteridae: Etmopterus) from
southern Africa. Copeia, 2011, 379–384.
https://doi.org/10.1643/CI-09-183
Ebert, D.A., Fowler, S. & Compagno, L.J.V. (2013) Sharks of the world: a fully illustrated guide to the sharks of the world.
Wild Nature Press, Plymouth, 528 pp.
Ebert, D.A., Straube, N., Leslie, R.W. & Weigmann, S. (2016) Etmopterus alphus n. sp.: a new lanternshark (Squaliformes:
Etmopteridae) from the south-western Indian Ocean. African Journal of Marine Science, 38, 329–340.
https://doi.org/10.2989/1814232X.2016.1198275
Humphries, R.L. Jr., Tagami, D.T. & Seki, M.P. (1984) Seamount fishery resources within the southern Emperor-northern
Hawaiian Ridge area. In: Grigg, R.W. & Tanoue, K.Y. (eds.), Proceedings of the second symposium on resource
investigations in the Northwestern Hawaiian Islands. Vol.1. Sea Grant Miscellaneous Reports, UNIHI-SEAGRANT-MR-
84-01, 283–327.
Kotlyar, AN. (1990) Dogfish sharks of the genus Etmopterus Rafinesque from the Nazca and Sala y Gómez Submarine Ridges.
Trudy Instituta Okeanologii Imeni P.P. Shirshova, 125, 127–147.
Last, P.R. & Stevens, J.D. (2009) Sharks and rays of Australia. CSIRO Publishing, Melbourne, 644 pp.
Last, P.R. & Stewart, A.L. (2015) Family Etmopteridae. In: Roberts, C.D., Stewart, A.L., Struthers, C.D. (Eds.), Fishes of New
Zealand. Vol . 2. Te Papa Press, Wellington, pp. 139–147.
EBERT ET AL.
382
·
Zootaxa 4237 (2) © 2017 Magnolia Press
Mundy, B.C. (2005) Checklist of the fishes of the Hawaiian Archipelago. Bishop Museum Bulletins in Zoology, 6, 1–704.
Sabaj, M.H. (Ed.) (2016) Standard symbolic codes for institutional resource collections in herpetology and ichthyology: an
Online Reference. Version 6.5 (16 August 2016). American Society of Ichthyologists and Herpetologists, Washington, DC.
Available from: http://www.asih.org/ (accessed 8 October 2016)
Schaaf-DaSilva, J.A. & Ebert, D.A. (2006) Etmopterus burgessi sp. nov., a new species of lanternshark (Squaliformes:
Etmopteridae) from Taiwan. Zootaxa, 1373, 53–64.
Shirai, S. & Tachikawa, H. (1993) Taxonomic resolution of the Etmopterus pusillus species group (Elasmobranchii,
Etmopteridae), with description of E. bigelowi, n. sp. Copeia, 1993 (2), 483–495.
https://doi.org/10.2307/1447149
Straube N., Iglésias, S.P., Sellos, D.Y., Kriwet, J. & Schliewen, U.K. (2010) Molecular phylogeny and node time estimation of
bioluminescent lanternsharks (Elasmobranchii: Etmopteridae). Molecular Phylogenetics and Evolution, 56, 905–917.
https://doi.org/10.1016/j.ympev.2010.04.042
Taylor, L.R. (1993) Sharks of Hawai‘i: their biology and cultural significance. University of Hawai‘i Press, Honolulu, 126 pp.
Wetherbee, B.M. & Kajiura, S.M. (2000) Occurrence of a rare squaloid shark, Trigonognathus kabeyai, from the Hawaiian
Islands. Pacific Science, 54 (4), 389–394.
White, W.T., Ebert, D.A., Naylor, G.J.P., Ho, H-C, Clerkin, P.J., Verissimo, A. & Cotton, C.F. (2013) Revision of the genus
Centrophorus (Squaliformes: Centrophoridae): Part 1
—
redescription of Centrophorus granulosus (Bloch & Schneider), a
senior synonymy of C. acus Garman and C. niaukang, Teng. In: Carvalho, M.R. de, Ebert, D.A., Ho, H-C, & White, W.T.
(Eds.), Systematics and biodiversity of sharks, rays, and chimaeras (Chondrichthyes) of Taiwan. Zootaxa, 3752 (1), 35–72.