Chapter

Neutrons Unveil Secrets of Musical Instruments

Authors:
  • CREF - Museo Storico della Fisica e Centro Studi e Ricerche Enrico Fermi
To read the full-text of this research, you can request a copy directly from the authors.

Abstract

Ancient musical instruments are complex objects constructed in the past with the aim of obtaining the best sound quality. Construction parameters change during time according to the aesthetics of the historical period and required sonic/musical features. Musical instruments are mostly made of wood, metals and hide. Neutron based methods such as diffraction, radiography and tomography can be used to study musical instruments providing a link between different disciplines including nuclear physics, metallurgy, cultural heritage and acoustics.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

Conference Paper
Full-text available
This paper describes the technical approach and practical application of a new non-destructive microscopic identification method which is ideally suited for the wood identification of cultural (heritage) objects, e.g. music instruments. 3D-reflected-light microscopy enables the scientist to study individual components in historical instruments without destructive preparation of microscopic slides from detached wood blocks. This special technique offers a good option to determine which timbers are traditionally used for certain components in historical plucked and stringed instruments.
Article
Full-text available
Conservation of Cultural Heritage is extremely important not only from a cultural point of view, but also from a practical one. It is our duty to pass on to future generations the cultural heritage left tous by our ancestors. Wood is one of the most common materials used to generate works of art which are in a state of constant change and/or deterioration. In order to optimize the knowledge of artworks together with their conservation, it is necessary to use the most advanced scientific and technological tools. In the following paper, we will show the results which can be achieved by application of complementary techniques based on the combined use of X-rays and neutrons as structural probes.
Article
Full-text available
A metallic 19th century flute was studied by means of integrated and simultaneous neutron-based techniques: neutron diffraction, neutron radiative capture analysis and neutron radiography. This experiment follows benchmark measurements devoted to assessing the effectiveness of a multitask beamline concept for neutron-based investigation on materials. The aim of this study is to show the potential application of the approach using multiple and integrated neutron-based techniques for musical instruments. Such samples, in the broad scenario of cultural heritage, represent an exciting research field. They may represent an interesting link between different disciplines such as nuclear physics, metallurgy and acoustics.
Article
Full-text available
A non-destructive method is described applicable for the investigation of inner defects and especially the description of the moisture distribution in wooden samples, based on the transmission with neutrons. Contrary to the application of x- or gamma ray, neutrons have a high sensitivity in hydrogen detection. In this way, it becomes possible to measure the naturally hydrogen content in wood and to prove changes in the wood wetness. This process can be analysed quantitatively in its local and time dependent development. The method can be used for the check of the value of waterproofing liquids or coatings, the localisation of inner defects and failures as well as generally for the description of moisture transport in wood.
Article
Since the advent of the nuclear reactor, thermal neutron scattering has proved a valuable tool for studying many properties of solids and liquids, and research workers are active in the field at reactor centres and universities throughout the world. This classic text provides the basic quantum theory of thermal neutron scattering and applies the concepts to scattering by crystals, liquids and magnetic systems. Other topics discussed are the relation of the scattering to correlation functions in the scattering system, the dynamical theory of scattering and polarisation analysis. No previous knowledge of the theory of thermal neutron scattering is assumed, but basic knowledge of quantum mechanics and solid state physics is required. The book is intended for experimenters rather than theoreticians, and the discussion is kept as informal as possible. A number of examples, with worked solutions, are included as an aid to the understanding of the text. © Cambridge University Press 1978 and Dover Publications Inc. 1996 and G. L. Squires 2012.
Article
The basics and experimental details of transmission radiation techniques in the application to conservation of wooden cultural objects are described. Standard and synchrotron X-rays, as well as neutrons, can provide very useful options for the non-invasive analysis of the wood structure, its conservation state and the influence of wood treatment in the conservation and decontamination process. The working and application range specific to each kind of radiation is discussed. Although X-ray methods (standard tube systems and synchrotron light source facilities) can cover a wide range in object size and wood density, neutrons can be used preferentially to study and quantify substances with high hydrogen content (moisture, resin, glues, wax) inside the wooden structure. Several examples chosen from studies performed within COST Action IE0601 illustrate the results that can be obtained using these techniques and their combination. The need for further studies using the performances available at large-scale facilities is discussed as a way to establish routine approaches for wood conservation and museums objects.
Article
At December 3rd 1996, the spallation neutron source SINQ had its first proton beam onthe target. With a steady-state proton beam of 850 IlA this facility is now the strongest of its kind in the world. One of the first experimental facilities in operation was theradiography station NEUTRA (for NEUtron Transmission Radiography). The designwas described at earlier meetings [1,2] and the first validation measurements werereported [3]. There are some advantages in comparison to other radiography stations atresearch reactors. This will be demonstrated in detail by means of the measured valuesand examples of practical applications. The use as reference facility will be envisagedwithin an European project (COST-524).
Article
In 2003, the components for the neutron radiography and tomography facility ANTARES were constructed and assembled at the beam line SR4B in the northeast corner of the experimental hall at FRM II (J. Radiat. Isotopes (2002), accepted for publication). ANTARES consists of an external beam shutter, flight tube, radiation shielding and measurement blockhouse. The shielding elements are constructed as steel casings filled with heavy concrete. Many harsh constrains in space, accessibility and other conditions (such as a very limited area accessible by the hall crane and restricted space due to surrounding instruments) made it necessary to develop special technical solutions for every step of the construction of the facility. From filling up shielding elements with heavy concrete in winter conditions (temperature below 0°C) to the development of an hydraulics driven external shutter and collimator positioning system, new convex-shaped nearly one meter diameter vacuum flanges and windows, the development of a movable 30-ton wall on rails as blockhouse door, upto the assembly and exact positioning of heavy components (upto 50tons) using air cushions, ball casters and a special small truck-mounted telescopic crane.
Article
Attenuation coefficients and mass attenuation coefficients of wood were determined theoretically and experimentally for thermal and cold neutrons. Experiments were carried out at the neutron imaging facilities at the Paul Scherrer Institute, Villigen (CH). For the calculation of theoretical attenuation coefficients, only the three main elemental components (carbon, oxygen and hydrogen) were taken into consideration. While hydrogen accounts only for 6% (by wt) of wood, over 90% of the attenuation can be attributed to this element. Nitrogen and other trace elements were estimated to have a negligible impact on the theoretical attenuation coefficient. For the experimental determination of the attenuation coefficients, samples from different European and tropical wood species were tested in order to examine the influence of density and extractives content. Experimental results show a very strong linear correlation between attenuation coefficient and wood density irrespective of the tested species and extractives content that play only a minor role. As neutrons are very susceptible to scattering, it is necessary to apply a scattering correction if a quantitative evaluation is intended.
Article
Different oils, waxes, natural and synthetic resins are in use for conservation and stability enhancement of degraded wood samples. X-ray radiography, tomography and thermography studies were carried out at several places as an attempt for the visualization of the conservation procedures.Because of the high sensitivity of neutrons in detecting hydrogen-containing materials, the visualization of their distribution can be obtained by means of neutron radiography at the NEUTRA facility of SINQ with good resolution. One of the most common conservation preservatives for wood consolidation is the acryl resin “Paraloid B-72”. Combined with different solvents in a variety of solvent mixtures, B-72 can be used to address a diversity of absorption, dispersion or evaporation determinants for different wooden objects. Therefore, four different acryl resin solvents of the same acryl resin applied to coniferous wood samples (4×4×2.7 cm) were investigated to determine the uptake and loss processes, followed by measuring sequences of images of the 2-dimensional distribution. This was done by creating image sequences showing the process of uptake and loss processes as two-dimensional distribution over about 20 h. The resin uptake depends strongly on the solvent, as well on the proportion of the resin in the composition. The acryl-ethylacetate composition has the lowest uptake, but the composition of 20% acryl 80% toluol has soaked up almost eight times more. Out of these results, a composition of 20% acryl and 80% toluol seems to be the best of the tried compositions, because the greatest part of resin remains and its allocation seems to be the most homogeneous as well.
Article
In this paper we discuss an analytical method, neutron-resonance-capture-analysis (NRCA), which uses the energies of resonances to recognize elements. These resonances are observed by the time-of-flight technique using a pulsed neutron beam at the GELINA facility in Geel (Belgium). The prompt γ-radiation, emitted after a neutron is captured, is used to signal that capture occurred. Areas of resonance peaks are used to evaluate the elemental composition of objects and materials quantitatively. A comparison of NRCA and PGAA is made and elucidated with experimental data resulting from measurements of bronze artefacts at GELINA and at the Budapest Neutron Centre.
Article
Combined algorithms are now available that make use of various formalisms to treat x-ray and neutron scattering data.
Non-destructive testing of wood by means of neutron imaging in comparison with similar methods
  • D Mannes