PatentPDF Available

Apparatus and method for producing hydrogen-dissolved drinking water

August 2013

License
USPTO TOS

Patent: US8518225B2

Authors:

CLEA INC.

An apparatus for producing in the home hydrogen-dissolved drinking water that is suitable for drinking, has a high dissolved hydrogen concentration, and a long dissolved hydrogen life. A hydrogen-dissolved drinking water production apparatus includes an electrolytic cell through which water can pass for producing drinking water having a pH in a range of 2.5 to 8.5, and in particular, in a range of 5.8 to 8.5, and a dissolved hydrogen concentration of 0.1 ppm or more by supplying high-purity water having a conductivity of 50 μS/cm or less. The hydrogen-dissolved drinking water production apparatus is characterized in that the electrolytic cell includes a vertical anode chamber having a water-permeable plate-like anode electrode and a vertical cathode chamber having a plate-like cathode electrode, the anode chamber and the cathode chamber are separated by a diaphragm formed from a fluorine-based cation exchange membrane, the water-permeable plate-like anode electrode is closely adhered to the diaphragm formed from the fluorine-based cation exchange membrane, and an ion-exchange resin is filled in a space between the diaphragm and the cathode electrode.

Available via license: USPTO TOS

Content may be subject to copyright.

ResearchGate has not been able to resolve any citations for this publication.

ResearchGate has not been able to resolve any references for this publication.

Article

The hydrogen ion-alkali cation exchnage in aqueous mixtures ...

January 1970

Typescript. Thesis (Ph. D.)--Duke University, 1962.

Article

Full-text available

Analisis effisiensi penukaran ion pada unit demineralisasi di PT Petrowidada Analysis of ion exchang...

September 2023

ABSTRAK: Air demineralisasi merupakan air yang memiliki banyak kegunaan. Dilaboratorium air demineralisasi digunakan sebagai pelarut dan pencuci peralaratan laboratorium, sedangkan di industri air demineralisasi digunakan sebagai air proses untuk BWF (Boiler Feed Water). Proses demineralisasi air menggunakan pertukaran ion merupakan salah satu cara proses pemurnian air .Pada dasarnya proses ... [Show full abstract] pemurnian air dengan metode pertukaran ion adalah mengganti semua kation dan anion(selain OH-) yang terlarut dalam air dengan kation hidrogen dan anion OH-dari dalam resin. Analisis efisiensi resin pertukran ion pada penelitian ini mengunakan data pengamatan konduktivias raw water dengan produk air hasil deminerlisasi. Hasil penelitian menunjukan bahwa nilai efisiensi resin kation dan anion pada proses demineralisasi secara berurutab sebesar 72,86 % dan 82,05 %. Hasil lain juga menunjukan bahwa lama siklus regenerasi pada proses demineralisasi yaitu selama 13 jam untuk penggunaan secara berkelanjutan. Nilai efisiensi resin kation tergolong dibawah standar yaitu 80%, artiya resin kation mengalami kejenuhan dan penurunan kualitas. Sementara itu untuk resin anion perolehan nilai efisiensinya diatas 80% menunjukan kualitas resin tergolong sangat baik dan tidak jenuh. ABSTRACT: Demineralized water is water that has many uses. In laboratories, demineralized water is used as a solvent and for washing laboratory equipment, while in industry demineralized water is used as process water for BWF (Boiler Feed Water). The water demineralization process using ion exchange is one method of water purification process. Basically, the water purification process using the ion exchange method is to replace all cations and anions (other than OH-) dissolved in water with hydrogen cations and OH-anions from the resin. Analysis of the efficiency of ion exchange resins in this research uses observation data on the conductivity of raw water with demineralized water products. The research results show that the efficiency values of cation and anion resins in the demineralization process are 72.86% and 82.05%, respectively. Other results also show that the length of the regeneration cycle in the demineralization process is 13 hours for continuous use. The efficiency value of the cation resin is below the standard, namely 80%, meaning that the cation resin is experiencing saturation and a decrease in quality. Meanwhile, for anion resin, the efficiency value obtained is >80%, indicating that the resin quality is classified as so good and not saturated.

Article

Small water supply system with plasma-modified poly(tetrafluoroethylene) membrane for drinking water...

March 2024 · Process Safety and Environmental Protection

Article

ELECTROLYTIC SYNTHESIS REACTION WITH THE PARTICIPATION OF PROTONS GENERATED BY IONIZATION OF HYDROGE...

September 1984

An important problem in electrolytic synthesis of organic compounds is the correct selection of solvent and electrolyte. In view of the low solubility of the majority of organic compounds in water, their solutions in mixtures of water with organic solvents or in pure organic solvents are used for electrolysis of such compounds. A second important problem in the electrolytic synthesis of organic ... [Show full abstract] compounds is the problem of separation of the electrolysis products from the electrolyte. To solve these problems the authors suggest the use of a solid polymer electrolyte, which has recently found wide application in the electrolysis of water. The use as an electrolyte of a cation exchange or anion exchange membrane with electrodes/catalysts deposited directly on it provides stable electrical conductivity for the system and separation of the cathodic and anodic areas, and simplifies separation of the reaction products since the electrolyte does not mix with either the original materials or with the reaction products. It is shown that in comparison with the normal methods organic electrolysis with a solid polymer electrolyte possesses a number of advantages and provides a means of extending the possibility of synthesis of various types of organic materials without the use of base electrolytes, the separation of the desired products of simplifying, and of reducing the power consumption required for the process.