Article

History of corrosion expert engineer education in BME

January 2009
Korrozios Figyelo 49(4):72-78+62

Authors:

In our country, in the decades past, the most successful form of corrosion expert education was the postgraduate education in the universities. The education had started at the same time, in 1964 in Budapest and in Veszprém, and had lasted until 1980 in Chemical University of Veszprém, and until 2005 in BME Department of Chemical Engineering. In this two place, almost 400 people had been got acquainted with the basis of corrosion, various methods and materials of corrosion protection. In this review, the history of corrosion expert engineer education in BME between 1964 and 2005 is summarized.

ResearchGate has not been able to resolve any citations for this publication.

ResearchGate has not been able to resolve any references for this publication.

Chapter

Electrodeposition of Paint

September 1985 · ACS Symposium Series

GEORGE E. F. BREWER

In the late 1950s a group of chemical engineers of Ford Motor Co. began to experiment with a new paint application process that they called "electrocoating." The process resembles metal plating in as much as an electric direct current causes the paint to deposit on conductive surfaces (Figure 1). Quickly, the many advantages of the process were recognized and summarized as "Electrocoating... The ... [Show full abstract] greatest breakthrough since the invention of the spray gun...." Background Corrosion of metals results in enormous damage to our economy, and a great need exists for improved corrosion protection. A study of the deplorable junk piles reveals that discarded merchandise exhibits shiny, almost new looking surfaces in certain of its areas, while other sections of the same piece are completely corroded. Typical examples for the selective action of corrosion are automobile bodies. The roof of a car, the hood, and the trunk lid show usually very little

Article

Problems related to standardising in corrosion engineering practice in the year 2002

January 2002

T. Miklós

The present situation evolved by the ratification of standards in English (and in some cases in German) is not acceptable for the practising engineers. It means that the guidance of the technical works are expressed in foreign language; and not only in the field of corrosion protection. The practice of cathodic protection is regulated by one standard in Hungarian and six standards in English. ... [Show full abstract] This situation causes confusion mainly in construction and operation. The statement of the Chamber of Hungarian Engineers afford an acceptable compromise.

Article

Corrosion of stainless steels in highly oxidizing nitric acid

January 1988

Hiroo Nagano

The article summarizes the corrosion behavior of stainless steels in highly oxidizing nitric acid. Included are the effects of environmental and material factors on corrosion in the trans-passive potential region. The mechanism of selective grain boundary attack and corrosion protection by controlling the environments or using corrosion resistant alloys are also described.

Article

Corrosion Protection of Steel Viewed from the Standpoint of Economics.

February 1975

K.A. Van Oeteren

The costs of corrosion damage and the need for corrosion protection are reviewed. The importance of the application of protective coatings as part of the processing, rather than the application, of steel is emphasized.

Article

Corrosion Problems in Chile

December 1961 · Anti-Corrosion Methods and Materials

T.P. Hoar

Though Chile is cut off through geographical considerations from the mainstreams of knowledge in the corrosion protection field,there are several small centres of investigation, research and development that may be the nuclei for future growth. Engineers there have been forced to develop their own methods and have in many cases been remarkably successful. After a recent stay in Chile, which ... [Show full abstract] included a wide coverage of the industrial scene, Dr. Hoar presents a firmly outlined picture of the ‘corrosion situation’.

Article

Sind Vorbehalte gegenüber einer Verwendung verzinkter Bauteile in Hallenbädern gerechtfertigt?

January 2012 · Stahlbau

U. Nürnberger

In der DIN EN ISO 12944, Teil 2, wird die Korrosionsbelastung in Hallenbädern einer Korrosivitätskategorie C4 (starke Korrosionsbelastung) zugeordnet. Folgt man den Angaben dieser Norm, dann sollte bei verzinkten Bauteilen der jährliche Zinkabtrag in einer Hallenschwimmbadatmosphäre mehrere Mikrometer betragen. Ein solches Korrosionsverhalten stimmt jedoch nicht mit den baupraktischen Erfahrungen ... [Show full abstract] überein. Im vorliegenden Beitrag wird die Badatmosphäre aus korrosionschemischer Sicht betrachtet. Weiterhin werden Untersuchungen an verzinkten Bauteilen in bis zu 40 Jahre alten Hallenschwimmbädern dargestellt, und es werden Ergebnisse zur langzeitigen Zinkkorrosion in einem im Hinblick auf die Korrosionsbeanspruchung eher kritischen Bad dargelegt. Danach ist die Zinkkorrosion in den mit Leitungswasser betriebenen normalen Hallenschwimmbädern erheblich geringer als in der DIN EN ISO 12944 ausgewiesen. Es wird ein Vorschlag unterbreitet, diesem Sachverhalt im Regelwerk Rechnung zu tragen. Are reservations against the usage of galvanized building elements for indoor pools justified? According to DIN EN ISO 12944, part 2, the corrosion exposure in indoor pools falls under corrosion category C4 (severe corrosion exposure). Consequently, the zinc corrosion of the galvanized building elements exposed to an indoor pool atmosphere would amount to several micrometers. However, this kind of corrosion behaviour does not correspond with the practical building experiences. This paper pertains to chemical corrosion in a pool atmosphere. Furthermore, the investigations of galvanized building elements in up to 40-year-old indoor swimming pools are summarized and the results of long-time zinc corrosion in a rather critical pool atmosphere are presented. Accordingly, the zinc corrosion in a normal indoor pool using tap water is substantially lower than stated in DIN EN ISO 12944. It is proposed that account should be taken pertaining to this issue.

Article

Advances in monitoring the corrosion and protection of concrete reinforcement over the past decade

January 2006 · NACE - International Corrosion Conference Series

This paper reviews trends regarding the use of electrochemical methods over the past decade in the context of monitoring corrosion and corrosion protection of steel in concrete. Emphasis is placed on the methodology, techniques, and the application of electrochemical corrosion monitoring in practice.

Article

MICROCIRCUIT CORROSION AND MOISTURE CONTROL.

May 1985

Robert K. Lowry

The author discusses some chemical considerations of metallized-IC corrosion, including the contributory role of residual ionic species. Precautions for corrosion protection as well as analytical methods for measuring moisture in hermetic packaging are also discussed.

Article

Korrosion und Korrosionsschutz in der Hochdrucktechnik

October 2004 · Materials and Corrosion

Ausgehend von einigen herkömmlichen Behältertypen und Dichtungselementen geben die Verfasser eine Übersicht typischer Korrosionserscheinungen, die im Druckbereich bis 500 bar zu berücksichtigen sind. Dabei wird gezeigt, daß es in bestimmten Fällen noch nicht möglich ist, dem Konstrukteur die theoretischen Grundlagen zu liefern, die eine Beherrschung dieser Korrosionen ermöglichen. Man ist daher ... [Show full abstract] bei der Lösung der für das Hochdruck- und Hochtemperaturgebiet typischen Probleme noch immer auf die Empirie angewiesen. Bezüglich des Korrosionsschutzes stehen im wesentlichen die folgenden Hilfsmittel zur Verfügung: Innenauskleidung; Futterrohr; plattierte Bleche; Schwimmblase; Auftragsschweißung. Corrosion and corrosion protection in high pressure technology Starting from a number of conventional types of containers and sealing elements the authors present a review of typical corrosion phenomena to be taken account of in the pressure range up to 5000 bars. It is shown in this context that in certain cases it is not yet possible to make available to the designing engineer the theoretical bases which would enable these corrosions to be kept under control. This is why the solution of problems typical to high pressure and high temperatur ranges has still to rely on empirics. As to corrosion protection the following means can be applied: lining; internal tube; plated sheet; floating internal vessel; bard facing.

Article

THE CORROSION and PROTECTION CENTRE AT U.M.I.S.T.: I: Corrosion education

December 1972 · Anti-Corrosion Methods and Materials

In April 1972, Corrosion and Protection Centre was established at the University of Manchester Institute of Science and Technology, based upon the former Corrosion Science Division of the Department of Chemical Engineering. Simultaneously, the appointment of a Professor of Corrosion Science, Britain's first such chair, was announced. Professor G. C. Wood, formerly Reader in Corrosion Science in ... [Show full abstract] the Department of Chemical Engineering, was elected to this Chair. We shall attempt to outline, in a series of brief articles, the reasons for the establishment of the Centre and to describe the approach adopted by the Centre to its three main areas of activity in corrosion and protection, namely education, research and advice and assistance to industry.

Conference Paper

Full-text available

Concrete of Sewage Collectors and Their Protection: Corrosion Mechanisms

June 1997

The analysis of investigations aimed at the study of chemical and biochemical processes taking place in sewage collectors is perfomed. The mechanism of concrete corrosion in above-water part of the sewage collectors is explained. The measures of their protection and durability providing are developed.

Article

Research progress of thermal spray technology for corrosion control of marine steel structures sn sp...

January 2012 · Corrosion and Protection

The splash zone is the most severe corrosion environment for marine steel structures, which seriously threatens the security of service for steel structures, tt is particularly necessary to develop long lasting technology for steel structures in splash zone, This paper introduces recent advances in the development of the corrosion control techaiques for steel structures in splash zone at home and ... [Show full abstract] abroad, In addition, thermal spray anti-corrosion technique and its engineering application are summarized, the characteristics and future research directions of thermal spray corrosion protection technique are also presented.

Last Updated: 22 Oct 2024