Near Field Communication (NFC) Technology: A Survey

Abstract

Near Field Communication, NFC-is one of the latest short range wireless communication technologies. NFC provides safe communication between electronic gadgets. NFC-enabled devices can just be pointed or touched by the users of their devices to other NFC-enabled devices to communicate with them. With NFC technology, communication is established when an NFC-compatible device is brought within a few centimetres of another i.e. around 20 cm theoretically (4cm is practical). The immense benefit of the short transmission range is that it prevents eavesdropping on NFC-enabled dealings. NFC technology enables several innovative usage scenarios for mobile devices. NFC technology works on the basis of RFID technology which uses magnetic field induction to commence communication between electronic devices in close vicinity. NFC operates at 13.56MHz and has 424kbps maximum data transfer rate. NFC is complementary to Bluetooth and 802.11 with their long distance capabilities. In card emulation mode NFC devices can offer contactless/wireless smart card standard. This technology enables smart phones to replace traditional plastic cards for the purpose of ticketing, payment, etc. Sharing (share files between phones), service discovery i.e. get information by touching smart phones etc. are other possible applications of NFC using smart phones. This paper provides an overview of NFC technology in a detailed manner including working principle, transmission details, protocols and standards, application scenarios, future market, security standards and vendor's chipsets which are available for this standard. This comprehensive survey should serve as a useful guide for students, researchers and academicians who are interested in NFC Technology and its applications [1].

Full text

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
DOI: 10.5121/ijci.2015.4213 133
NEAR FIELD COMMUNICATION (NFC)
TECHNOLOGY: A SURVEY
Anusha Rahul
1
, Gokul Krishnan G
2
, Unni Krishnan H
3
and Sethuraman Rao
4
Amrita Center for Wireless Networks and Applications, Amrita Vishwa Vidyapeetham,
Kollam, Kerala, India
A
BSTRACT
Near Field Communication, NFC- is one of the latest short range wireless communication technologies.
NFC provides safe communication between electronic gadgets. NFC-enabled devices can just be pointed or
touched by the users of their devices to other NFC-enabled devices to communicate with them. With NFC
technology, communication is established when an NFC-compatible device is brought within a few
centimetres of another i.e. around 20 cm theoretically (4cm is practical). The immense benefit of the short
transmission range is that it prevents eavesdropping on NFC-enabled dealings. NFC technology enables
several innovative usage scenarios for mobile devices. NFC technology works on the basis of RFID
technology which uses magnetic field induction to commence communication between electronic devices in
close vicinity. NFC operates at 13.56MHz and has 424kbps maximum data transfer rate. NFC is
complementary to Bluetooth and 802.11 with their long distance capabilities. In card emulation mode NFC
devices can offer contactless/wireless smart card standard. This technology enables smart phones to
replace traditional plastic cards for the purpose of ticketing, payment, etc. Sharing (share files between
phones), service discovery i.e. get information by touching smart phones etc. are other possible
applications of NFC using smart phones. This paper provides an overview of NFC technology in a detailed
manner including working principle, transmission details, protocols and standards, application scenarios,
future market, security standards and vendor’s chipsets which are available for this standard. This
comprehensive survey should serve as a useful guide for students, researchers and academicians who are
interested in NFC Technology and its applications [1].
K
EYWORDS
Near Field Communication, RFID
1.
I
NTRODUCTION
Nowadays the increasing mobility of devices provided by mobile communications has become an
important feature in the emerging technical world. Before the introduction of Near Field
Communication (NFC) technology, the mobile phones already had several types of
communication options with the external environment .When the mobile phones were introduced,
the primary need was to setup voice communication, it was primarily provided by Global System
for Mobiles (GSM) which has other services such as SMS, MMS and even internet access. Later
Bluetooth technology was introduced that connects peripherals with computing devices including
mobile phones [2]
In present days, a new communication technology known as NFC is becoming popular in mobile
smart phones. This technology needs two NFC compatible devices placed very near to each other
(less than 4cm) in order to communicate. NFC operates at 13.56 MHz and can transmit

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
134
information up to a maximum rate of 424 Kbits per second [3]. In an NFC communication, two
devices are needed. First device is called the initiator which is an active device and is responsible
for starting the communication, whereas second device is called the target and responds to the
initiator’s requests. The target device may be active or passive. The communication starts when
the active device gets close to the target and generates a 13.56 MHz magnetic field and powers
the target device [3, 4] (See Figure 1).The NFC technology works via magnetic field induction
and operates on an unlicensed radio frequency band. Also it includes an embedded energy source
component whereas the target can be a RFID card, tag or an NFC device which gives the reply to
initiator’s request [5].
The remaining part of this paper is structured as follows. Section II gives a clear idea about NFC
hand over, working principle and data transmission. Section III discusses about NFC protocols
and standards. Section IV discusses about the various NFC operation modes. In Section V we
give an overview of NFC security including the potential threats in NFC technology and
solutions. In Section VI we discuss about the worldwide NFC application. Section VII covers
NFC setup and Section VIII talks about NFC vendors and manufacturers.
Figure 1: NFC Enabled Phone
2.
N
FC
H
ANDOVER
,
W
ORKING
P
RINCIPLE
&
D
ATA
T
RANSMISSION
In NFC technology the communication is initiated with NFC but later the transmission is done by
some other technologies such as Wi-Fi/Bluetooth. The two handover mechanisms specified by
NFC forum are negotiated handover and static handover. In the first case, the initiator (handover
requester) sends a handover request to target device (handover selector) which might support
multiple carriers such as Wi-Fi/Bluetooth. Target device sends a response to the requester, i.e.
initiator (see Figure 2). NFC requester device can select the best possible carrier that is
compatible with both devices when it receives the response message. In static hand over method,
handover selector device does not comprise an NFC Forum device but has a NFC Forum tag
attached which gives memory space that can be read or written [6]. The main advantage of NFC

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
135
over Bluetooth is that it consumes far less power and doesn't require pairing but the highest data
transfer rate of NFC (424 Kbit/s) is lesser than that of Bluetooth V2.1 (2.1 Mbit/s) [1].
Figure 2: NFC Handover
NFC uses an inductive coupling technique comparable to the transformer principle i.e. the
magnetic near-field of two conductor coils is used to pair the initiator (Polling) device and target
(Listener) device (See Figure 3). In this pairing of the coils of initiator and target, a passive
listening device also affects the active polling device. A variation in the impedance of the
listening device results in an amplitude or phase changes to the antenna voltage of the polling
device, detected by the polling device [7].
Figure 3: NFC Transmission

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
136
3.
N
FC
P
ROTOCOLS
A
ND
S
TANDARDS
The NFC protocol needs standardization in order to be accepted by the industry for
commercialization and provide for compatibility between the devices produced by different
vendors. Standardization means keeping the specifications open and stable, and accessible for
everyone, also facilitating the protocol analysis and device adaptation for various purposes. The
standards are published by ECMA International and ETSI standards. The three standards ISO/IEC
14443 A, ISO/IEC 14443 B and JIS X6319-4 are RFID standards which have been prompted by
different companies (NXP, Infineon and Sony) [4,7].
• ISO-IEC Protocol
ISO/IEC 14443 is a series of international standards used for international interchange that
describes the parameters for identification cards as described in ISO/IEC 7810. It also gives a
detailed information about polling for proximity cards into the field of a nearest coupling device,
the initial request and reply command content, techniques to sense and communicate with one
proximity card amongst several proximity cards and other parameters necessary to initialize
communications between a proximity pairing device which can be the initiator or target and a
proximity card. Protocols used by upper layers and by applications which are used after the
primary phase is detailed in ISO/IEC 14443-4 [8].
• ISO 15963
This Standard gives information about the numbering systems that are accessible for the
recognition of RF tags used for the traceability of the IC and RF tag which is used for the close
evaluation in a multi-antenna configuration
• ISO 18000:
This standard has 2 mode of procedure, proposed to address diverse applications [3].
• ISO 18092(NFCIP-1) or ECMA 340
This Standard describes active and passive communication modes for NFC protocol and interface.
This gives the specifications of coding, modulation schemes, frame format, transfer speeds of the
RF interface, initialization schemes and surroundings required for data collision control through
initialization [8].
4.
N
FC
O
PERATION
M
ODES
NFC technology defines two types of devices. One is initiator device and other is target device.
Initiator device is one who initiates the communication and controls the data exchanges. Target
device is the device who responds to the initiator device. Active and Passive are the two operating
modes of NFC [13]. In active mode, both the initiator and the target generate the RF signal on
which the data is carried. In passive mode, RF signal is generated only by the initiator, and target
communicates back to the initiator using a technique called load modulation. NFC uses two types
of coding mechanism to transfer data, they are Manchester and Miller coding.
In addition to the two operating modes, there are three operating modes for device
communication [14]. These three modes depend on the application. Figure 4 shows three
operating modes of NFC technology standard.

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
137
4.1. Reader/Writer mode
In Reader/Writer mode of operation the application transfers data in NFC forum defined message
format. In this mode the NFC enabled mobile phone can perform read/write operation on NFC
tags. In Reader Mode, NFC initiator reads data from the NFC tag where as in the writer mode,
initiator writes data in to the tag. It should be noted that Reader/Writer mode of communication is
not secure. The applications supported by this mode are,
• Smart Poster
• Remote Marketing
• Remote Shopping
• Social Networking
•
Location based services
Figure 4: NFC Operating Modes
4.2. Card Emulation Mode
In card emulation mode, the NFC enabled mobile device acts as a contactless smart card. The
examples of smart card are debit card, credit card, access cards etc. Data transfer in this mode is
highly secure. This mode supports the following applications.
• Payment
• Loyalty
• Ticketing
• Access control
• Identity Services

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
138
4.3. Peer to Peer mode
Peer to peer mode supports link level communication. It supports two NFC enabled device to
exchange information such as a text message, contact record or data of any other kind. NFCIP-1
and LLCP are the two standardized options in peer to peer mode. This mode of communication is
secure. The applications supported by this mode are the following.
• Exchanging Data
• Money Transfer
• Social Networking
5.
N
FC
S
ECURITY
5.1. Threats
NFC applications such as contactless money payment demand a high level of security. As NFC
security has great importance, so it is to be a part of the basic NFC technology structure. Possible
threats associated with NFC are explained below.
5.2. Eavesdropping
Eavesdropping is a common threat found in all wireless communication technologies. NFC is also
a wireless communication interface between two entities [10]. They use RF signals to
communicate, so any equipment with an antenna in the range can receive the signal. The attacker
can extract the information from the signal transmitted through experimentation and periodic
analysis processes. This is very dangerous in the case of money payments, where the users use
some secret password; the eavesdropper acquires this information and can misuse it. It is very
difficult to prevent eaves dropping as the attacker who uses a very precise antenna can receive the
signal even if the signal strength is too weak. The only solution to eavesdropping is to use a
secure channel for communication.
5.3. Data Corruption and Manipulation
In NFC, data is sent from sender to receiver wirelessly. There are some specific formats for data
to be sent, so that the receiver accepts and decodes it [11]. The data which is not in the correct
format is rejected. Data corruption and manipulation attack arises when an attacker in between
corrupts or manipulates the data. The attacker may change the data format or change the contents
in it, so that the data becomes useless or gets rejected as it reaches the receiver. For some coding
schemes this attack is possible. The solution for this attack is to use a secure channel between the
communicating parties.
5.4. Man- in- the Middle attack
Man in the middle attack is one step further to data corruption and manipulation attack. In this
attack a third party intercepts the communication between two parties [12]. The attacker acts as a
relay between the sender and receiver and forwards data (See Figure 5). The attacker can corrupt,
alter, or discard the data being sent. Man in the middle attack is very difficult to achieve in NFC
links and so it is not common. The solution for this attack is to use active-passive communication
mode.

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
139
Figure 5: Man in the middle attack
5.5. NFC Worm
NFC worm attack is found in NFC enabled phones. In this the PushRegistry can be abused to
intercept all URI NDEF messages. It is done by utilizing the standardized NFC Java API [21].
Push Registry helps the applications to register themselves for handling some specific data like
images
5.6. Solutions
Establishing a secure channel between the sender and the receiver is the best solution for
eavesdropping, data corruption and manipulation attacks. As NFC is having inherent protection
against man in the middle attack, it is an easy task to setup. A shared key can be obtained between
sender and receiver using Diffie –Hellman based on RSA or elliptical curve. This shared key can
be used to derive a symmetric key like 3DES or AES. The symmetric key can be used to enable a
secure channel between the communicating entities. NFC specific key agreement mechanism is
also there, which is of less computational cost for establishing a secure channel.
6.
O
VERVIEW
O
F
N
FC
A
PPLICATIONS
This section provides an overview of NFC applications in the real world (See Figure 6) such as in
retail, automotive, office, terminal, theatre/ stadium etc. NFC technology is used for the purpose
of ticketing, payment, sharing (share files between phones), service discovery i.e. get information
by touching smart phones etc.
Some of the advantages of NFC to industrial applications are listed below [8]:
• NFC enables touch based and easy communication between two devices.
• Communication setup with NFC takes milliseconds order of time whereas for Bluetooth it
is typically in seconds order.
NFC enables longer lifetime of the sensor battery in wireless sensor applications, or even battery
less implementation of the sensor.

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
140
Figure 6: NFC Applications
6.1. NFC Ticketing
In NFC Ticketing, the user needs to carry a NFC enabled mobile phone to read and store the
ticket or access code from the reader [22]. There is a ticketing sever to which a NFC reader is
connected. The user can read the ticket from the reader and store it (See Figure 7).
Figure 7: NFC Ticketing

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
141
6.2. NFC Mobile Payment System
In NFC Mobile Payment System, credit card or debit card essentials of the user are stored in the
secure element which is built in the OS. The merchant’s NFC reader can read the essentials to
transfer the money from the account to finish the payment (See Figure 8).
Figure 8: NFC Mobile Payment
7.
N
FC
S
ETUP
Those who wish to use NFC must own an NFC compatible device or buy a SIM card or SD card
with an NFC chip installed on it [20]. So with this, one can communicate with other NFC devices
and tags. Most common operating systems used on NFC devices are android OS and Apple's iOS.
Users can activate Google wallet that is pre - installed on NFC compatible android phones. Other
android applications like PayPal’s mobile app, NFC payments can be downloaded from sites like
play store. Money transfer can be done by keeping two devices close to each other. Note that it is
very important to make your phone protected with a password, to prevent a thief from unlocking
the phone and using services such as Google Wallet to purchase items or send money from the
owner’s PayPal account to the thief’s own account.
8.
N
FC
V
ENDORS
A
ND
M
ANUFACTURERS
There are many vendors that have been working on NFC. Some of the names and their chipsets
are given in Table I. [15], [16], [17], and [18]. This is only for understanding of companies
that are manufacturing NFC chipsets and most of them are not available for retail sale.
Among these companies HTC and Xiaomi are using NFC controllers from NXP and Broadcom
[15]. Except Inside secure and MediaTek chipsets, all others will support full duplex mode of
communication. The prices of all chipsets are almost the same. Among them, Sony’s chipset is
expensive which is used in Sony’s NFC one touch remote [18] and NXP’s PN544 gives high
level of integration and greater flexibility. Also it supports a number of RF protocols [16].

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
142
Table 1: NFC Vendors and Manufacturers
Sl
No
Manufacturer / Vendor
Model Price
1 Broadcom BCM206794 US $18
2 NXP PN544 US $8.68
3 NXP NTAG203 US $8.2
4 Samsung Electronics S3FHRN2 12.28 Euro
5 Sony RC S330 US $28.33
6 HTC NXP/Broadcom
7 Xiaomi NXP/Broadcom
8 STMicroelectronics ST21NFCA NA
9 Oberthur Technologies Dragonfly NA
10 Qualcomm QCA1990 NA
11 MediaTek MT6605 NA
12 Shangai Fudan
Microelectronics[17]
FM1930 NA
13 Inside secure VaultIC 150/150D NA
9.
F
UTURE
D
IRECTIONS
O
F
N
FC
S
ERVICES
Many applications of NFC are the extensions to current solutions. Wireless /Contactless payment
and ticketing solutions are commonly available across the world and, are compatible with NFC
enabled devices. Taking these applications to an appropriately equipped mobile device will be the
next step in the adoption of NFC.
New generations gadgets such as iPad, iPhone and iPod are equipped with NFC technology [19].
Recently, Microsoft announced that all Windows8 Phone devices will make use of the NFC
technology. Google’s Smartphone app, Google Wallet, allows users to load entire credit card
information and pay with the swipe of their phone. Visa and Samsung combined to create a NFC
compatible Smartphone which will carry special content that aims to make purchases at the
Olympic Games faster.
10.
C
ONCLUSION
This paper covered the entire details of Near Field Communication (NFC) technology. NFC can
be combined with existing infrared, Bluetooth technologies for improving the range of NFC.
NFC offers a secure and simple way for transferring data between two electronic devices.
Another advantage of NFC is its compatibility with RFID technology. NFC is actually based on
RFID technology. RFID uses magnetic field induction to initiate communication between
electronic devices in close vicinity.NFC operates at 13.56MHz and has 424kbps maximum data
transfer rate. NFC is complementary to Bluetooth and 802.11 with their long distance capabilities.
This paper discussed the concepts of NFC technology in a detailed manner including working,
transmission details, protocols and standards, application scenarios, future market, security
standards and vendors’ chipsets available for this standard.

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
143
A
CKNOWLEDGEMENTS
We thank God Almighty for his grace, for giving us strength and ideas for making this work flow
smoothly.
R
EFERENCES
[1] NFC,Wikipedia,Available: http://en.wikipedia.org/wiki/Near_field_communication
[2] Vedat Coskun, Busra Ozdenizci, Kerem,” A Survey on Near Field Communication (NFC)
Technology” Wireless Personal Communications Volume 71, Issue 3 , pp 2259-2294
[3] NFC-Forum, Available: http://www.nfc-forum.org
[4] Ecma International, Near Field Communication - White Paper, 2005, Ecma/TC32-TG19/2005/012,
Available: http://www.ecma-international.org/
[5] Esko Strömmer,Juha Pärkkä, Arto,Ilkka\Korhonen Ylisaukkooja, “Application of Near Field
Communication for Health Monitoringin Daily Life”, Proceedings of the 28th IEEE EMBS Annual
International Conference, February 2006.
[6] NFC
handover,Available:http://developer.nokia.com/community/wiki/NFC_Handover_working_principle
[7] Rohde & Schwarz, NFC technology and measurements White Paper, June 2011.
[8] Shyamal Pampattiwar,”Literature Survey on NFC, Applications and Controller”, International Journal
of Scientific & Engineering Research, Volume 3, Issue 2, February-2012
[9] Future of NFC, available: http://www.nearfieldcommunicationnfc.net/nfc-future.html
[10] NFC Security Available: http://www.radio-electronics.com/info/wireless/nfc/nfc-near-field-
communications-security.php
[11] NFC Security available: http://www.nearfieldcommunication.org/nfc-security.html
[12] Ernst Haselsteiner and Klemens Breitfuß, “Security in Near Field Communication (NFC) Strengths
and Weaknesses”
[13] NFC operation modes available: http:// en.wikipedia.org/wiki/Near_field_communication.
[14] Ekta Desai and Mary Grace Shajan, “A Review on the Operating Modes of Near Field
Communication”, In proceedings of International Journal of Engineering and Advanced Technology
(IJEAT), December 2012
[15] BCM206794, Available: www.broadcom.com/products/NFC/NFCSolutions/BCM2079x-Family
[16] PN544,Available:http://www.nxp.com/documents/leaflet/75016890.pdf
[17] FM1930, Available: www.fmsh.com/xqitadmin/uploadFiles/20130529043554.pdf
[18] RC S330, Available: www.sony.net/HOME/Products/USB NFC Reader
[19] Phone list using NFC, available: www.nfcworld.com/nfc-phones-list/
[20] Setting up NFC, Available: http://www.nearfieldcommunication.org/howto-setup.html
[21] Collin Mulliner, “Vulnerability Analysis and Attacks on NFC-enables Mobile Phones” International
Conference on Availability, Reliability and Security, 2009
[22] Shyamal Pampattiwar, “Literature Survey on NFC, Applications and Controller” International Journal
of Scientific and Engineering Research, Volume 3, Issue 2, 2012
AUTHORS
Anusha Rahul received B. tech degree in Information technology from Mahatma
Gandhi University, India in 2006.She had more than 5 years teaching experience in
India and Abroad. She is now pursuing her Post Graduation in Wireless Networks and
Application from Amrita University, India. Currently she is working on wireless sensor
networks based project for augmenting women’s safety in women’s only local intracity
railway carriages.
Gokul Krishnan G received B.Tech degree in Electronics and Communication
Engineering from Cochin University of Science and Technology, India in 2013. He is now
pursuing his Post Graduation in Wireless Networks and Applications from Amrita
University, India. Currently he is working in a project which is associated with National
Knowledge Network (NKN)

International Journal on Cybernetics & Informatics (IJCI) Vol. 4, No. 2, April 2015
144
Unnikrishnan H received degree in Electronics and Communication Engineering from
Kerala University, India in 2012. He is now doing his Post Graduation in Wireless Networks
and Application from Amrita University, India. Currently he is working in a project on
Overtaking assistance System related to VANET Technology.
Prof. Sethuraman Rao is an associate professor at Amrita Center for Wireless Networks
and Applications, Amrita University, Kollam, Kerala, India. He holds a Masters degree in
Computer Science and a Bachelor's degree in Mechanical Engineering from IIT Madras,
India. He has over 20 years of international experience in the networking industry having
held technical and management positions at Juniper Networks, Alcatel-Lucent and a few
startups. His areas of interest include wired and wireless LANs, wireless security, software
engineering and network management.