Content uploaded by Allen Maroma
Author content
All content in this area was uploaded by Allen Maroma on Apr 08, 2022
Content may be subject to copyright.
Open Access Library Journal
How to cite this paper: Maroma, A.N. (2014) Solar Powered Cell Phone Charging Station. Open Access Library Journal, 1:
e1156. http://dx.doi.org/10.4236/oalib.1101156
Solar Powered Cell Phone Charging Station
Allen N. Maroma
Faculty of College of Industrial Technology, Bulacan State University, Malolos, Philippines
Email: maromaallen@yahoo.com
Received 27 October 2014; revised 29 November 2014; accepted 17 December 2014
Copyright © 2014 by author and OALib.
This work is licensed under the Creative Commons Attribution International License (CC BY).
http://creativecommons.org/licenses/by/4.0/
Abstract
This study is focused on the development of a cell phone charging station that is solely operated
through solar power by means of a solar cell which is attached to the charging station through a
backup storage battery. The device is mainly aimed for commercial use since it can require a cer-
tain fee for a specified period to charge a mobile phone. However, in case of calamities the charg-
ing station can be used as an emergency charging station in the event of prolonged power outages.
Since the device is a standalone system it can charge mobile phone as long as there is sunlight.
Even during night time, the device can still charge phone as long as the battery still has power.
Keywords
Solar Powered, Cellphone, Charging Station
Subject Areas: Electric Engineering, Entrepreneurship
1. Introduction
Abatement of global warming: Renewable energy use does not produce carbon dioxide and other greenhouse
emissions that contribute to global warming. The carbon dioxide released when biomass is burned equal amount
absorbed from the atmosphere by plants as they are grown for biomass fuel. Improving access to clean energy
sources: Increasing the flexibility of power systems as electricity demand changes, reducing pollution and emis-
sions from conventional energy systems. Reducing dependency, and minimizing spending on imported fuels.
Another advantage for many renewable energy technologies is that they are well-suited to small-grid applica-
tions and thus good for remote rural areas.
Electricity can be produced from renewable resources, the sun’s energy can be used to heat fluids for turbines
in solar thermal systems or can be converted directly to electricity using the principles of photovoltaic. The ex-
ponential rise in oil prices, the growing awareness of energy-related pollution, and the adverse effects of climate
change have all contributed to a re-evaluation of energy use. This re-evaluation has resulted in the improvement
in the efficiency with which energy is used in industry and power generation, as well as in lighting, household
appliances and transportation. The efficient use of energy is a major factor that contributes to the improvement
A. N. Maroma
OALibJ | DOI:10.4236/oalib.1101156 2 December 2014 | Volume 1 |
e1156
of in energy consumption that has occurred in the last decades in almost all industrialized countries. The amount
of additional energy required to improve the desired energy services depends on the efficiency with which the
energy is produced, delivered, and used. Energy efficiency improvement would help reduce financially invest-
ment in new energy supply system [1].
Cell phone is one of the most common means of communication today and through advancements in tech-
nology, also one of the most affordable electronic gadgets that one can avail. Many systems and devices have been
integrated into the cell phone making it a multipurpose gadget that can process pictures, emails and the like [2].
But as with many electronic gadgets, cell phones rely on electric current to carry out its many functions and
they require to be charged every so often. More so with android phones which consume battery power much
faster than regular cell phones. In order to address the issue of presenting an alternative method of powering
electronic devices, the researcher opted to develop a Solar Powered Cell Phone Charging Station.
2. Objective of the Study
The main thrust of this study is to develop a mobile phone charging station that is powered through solar energy.
Specifically, this study aimed to achieve the following objectives:
1) Determine a solar panel that is appropriate for providing power for a cell phone charging station.
2) Design circuits and their corresponding interfaces that can safely provide charging power for mobile
phones.
3) Determine a suitable timing system for providing cell phone charging services.
4) Determine the acceptability of the device based on the following:
a) Physical features;
b) Cost;
c) Durability;
d) Operation.
3. Data and Method
In an effort to be guided in the implementation of the study, the conceptual model has been used as a guide in
developing the Solar Powered Cellphone Charging Station (Figure 1).
The INPUTS of the study are the conceptualization taken from similar studies and advised from experts.The
design of the studio and set-up of equipments was also done during this stage. The equipment and materials as
well of its costs have been identified.
The PROCESS composed of constructing the casing and interconnecting the essential circuit were also suc-
cessfully undertaken. After all the equipments have been set-up and calibrated the station was tested and eva-
luated by faculty, students and potential users of the device.
The OUTPUT was the operational Solar Powered Cell Phone Charging Station after experts were satisfied
and their recommendations were taken into considerations. The project foretold the limitation, conclusion and
recommendation of the project.
4. Description of the Device
The device is composed of Circuits and interfaces that can safely provide charging power for mobile phones
Figure 1. Conceptual model of the study.
A. N. Maroma
OALibJ | DOI:10.4236/oalib.1101156 3 December 2014 | Volume 1 |
e1156
namely, the Solar Cell Module, switching circuits for the coin switch and a regulator circuit for maintaining the
voltage used for charging mobile phones (Figures 2-6).
4.1. Research Method
To attain the objectives set in the study, the developmental method of research was employed by the researchers.
Developmental Research aims to systematically examine products, tools, processes, and models in order to
provide reliable, usable information to both practitioners and theorists. It is intricately connected to real world
practice. It creates a loop with practice informing research and research, in turn, informing practice [3].
Specifically the Type 1 developmental study was utilized as the main method for achieving the objectives
which is focused upon a given instructional product, program, process, or tool. They reflect an interest in identi-
fying either general development principles or situation-specific recommendations. Typically Type 1 studies
address not only product design and development, but evaluation as well. At times they may validate a particular
design or development technique or tool [3].
4.2. Data Gathering Instrument
The researcher used evaluation questionnaires to determine the respondent’s perception on the acceptability and
functionality of the FM Broadcast Station Trainer. The profile of the respondents was shown below (Table 1,
Table 2).
Figure 2. Solar module for powering the system and the solar powered cell phone charg-
ing station.
Figure 3. Coin slot circuit.
A. N. Maroma
OALibJ | DOI:10.4236/oalib.1101156 5 December 2014 | Volume 1 |
e1156
Table 1. Weighted mean and verbal description.
Scale Verbal Interpretation
4.21 - 5.00 Highly Acceptable
3.41 - 4.20 Acceptable
2.61 - 3.40 Moderately Acceptable
1.81 - 2.60 Unacceptable
1.0 - 1.80 Highly Unacceptable
Table 2. Profile of the respondents.
Teacher
Respondent by Schools Population Sample Size Percentage %
Bulacan
State University 12 6 50
Bulacan
Polytechnic College 3 3 100
AMA
Computer University (Q.C.) 15 15 100
Lyceum
of the Phil. University (Manila) 3 3 100
ABC
5 Engineers (2) 2 2 100
TOTAL
35 29 83
4.3. Statistical Treatment of Data
Weighted Mean
For the Trainer for each indicator.
5. Results and Discussion
The group of evaluators composed of EEC Department faculty, engineers, people who are in the field of broad-
casting and the beneficiaries were requested to evaluate the acceptability of the Station in terms of the following
criteria, namely: 1) Physical Features, 2) Cost, 3) Durability, and 4) Operation (Table 3).
5.1. Physical Features
Based on the result of the evaluation, the appearance of the project was generally very acceptable as shown by
the computed over all mean of 4.26.
5.2. Cost
The group of the evaluators proved the acceptability of the research project as far as appearance and construc-
tion is concerned.
The evaluators strongly agreed, as revealed by the computed mean = 3.36 for the cost of research study mate-
rials used are locally-available with standard quality and some of the materials and components are slightly used
to be alternative source to attain reasonable costing (Table 4).
5.3. Durability
The table shows the materials used in the Solar Powered Cell Phone Charging station are of quality standard as
revealed by an average mean of 4.05 which means that the materials used in Very Acceptable (Table 5).
5.4. Operation
Since the instructions on how to use the device were clearly printed on the front panel, the evaluators needed no
assistance on how to operate it and rated the device with a mean rating of 4.17 with a descriptive rating of Very
Acceptable. And since it is solar powered it requires minimal maintenance. Thus, in terms of operation, the de-
vice was evaluated with a mean rating of 4.21 with a descriptive rating of Very Acceptable (Table 6, Table 7).
A. N. Maroma
OALibJ | DOI:10.4236/oalib.1101156 6 December 2014 | Volume 1 |
e1156
Table 3. Mean & descriptive ratings for physical features.
Physical
Features Mean Interpretation
Physical
features workmanship
The quality imparted to a thing in the process of making. 4.3 Very acceptable
Acceptability of the circuit
sub-assemblies
Easy to use or understand 4.2 Very acceptable
Labelling
of the parts well presented
Slip of paper, cloth, or other
material,
marked or inscribed, for attachment to something
toindicate
its control and destination.
4.3 Very acceptable
Average
4.26 Very acceptable
Table 4. Mean & descriptive ratings for cost.
Cost
Mean Interpretation
Material
Cost
Amount paid or required in payment for a purchase. 3.3 Moderately Acceptable
Development
Cost
Amount paid for the improvement of the project. 4.0 Very Acceptable
Average
3.36 Moderately Acceptable
Table 5. Mean & descriptive ratings for durability.
Durability
Mean Interpretation
Quality
of materials used pre-established measure of the
quality
of a material, expressed in physical units. 4.1 Very Acceptable
Rigidity
of construction
The property of a substance that renders it inflexible, stiff,
or no pliable. 4.0 Very Acceptable
Average
4.05 Very Acceptable
Table 6. Mean & descriptive ratings for operation.
Operation
Mean Interpretation
Easy
to operate/user friendly
Functioning effectively; efficient. 4.17 Very Acceptable
Absence
of the risk of electric shock
The danger or probability of loss to an insurer. 4.3 Very Acceptable
Low
Maintenance need
not needing much effort or money. 4.1 Very Acceptable
Average
4.21 Very Acceptable
Table 7. Over-all mean and descriptive rating of the evaluation of the acceptability of the device.
Criteria Mean Descriptive Rating
Physical Features 4.26 Very Acceptable
Cost 3.36 Moderately Acceptable
Durability 4.05 Very Acceptable
Operation 4.36 Very Acceptable
Total 4.008 Very Acceptable
A. N. Maroma
OALibJ | DOI:10.4236/oalib.1101156 7 December 2014 | Volume 1 |
e1156
5.5. Findings
Based on the set objective of the study, the following findings were derived:
1) The solar panel appropriate for providing power for a cell phone charging station is an 80 watt solar panel.
2) Circuits and interfaces that can safely provide charging power for mobile phones are the Solar Cell Module,
switching circuits for the coin switch and a regulator circuit for maintaining the voltage used for charging mo-
bile phones.
3) Timing system utilized for limiting the charging time is a simple 555 timer monostable circuit.
4) Based on the evaluation conducted to determine the acceptability of the device, the device was deemed as
highly acceptable by the respondents.
6. Conclusions
On the basis of the foregoing findings and the result of the evaluation, the following conclusions were derived:
1) The solar panel does not harness the optimum voltage during certain times of the day and has to be directed
manually towards the direction of the sun.
2) The time programmed for charging (15 minutes) was deemed to be too short for charging cell phones.
3) The main charging station was considered by some to be too high for short operators.
7. Recommendations
Based on the foregoing findings and conclusions, the following recommendations were made:
1) Height of the charging station should be lowered.
2) Standard charging time should be 20 minutes.
3) A voice warning prompt should be programmed on the device to inform the user of the time remaining.
4) A sun tracker can be installed to the solar panel to automatically direct the panel for maximum energy har-
nessing.
5) It is highly recommended, that a follow up feasibility study be made to determine the business potential of
the device.
References
[1] Lacap, A.M., et al. (2004) Solar Power Harvester. Undergraduate Thesis, Lyceum of the Philippines.
[2] Nolasco Jr., E.L. (2008) Enhance Solar Powered Wireless Weather Station Multi Source Cellular Phone Charger. Un-
published Master’s Thesis, Bulacan State University, Bulacan.
[3] Richey and Klein (2005) Developmental Study Concepts.
