Conference Paper

Multidisciplinary Control of a Sparse Interferometric Array Satellite Testbed

Authors:
To read the full-text of this research, you can request a copy directly from the authors.

Abstract

The MIT Adaptive Reconnaissance Golay-3 Optical Satellite (ARGOS) is a wide-angle Fizeau interferometer spacecraft testbed. Designing a space-based interferometer, which requires such high tolerances on pointing and alignment for its apertures, presents unique multidisciplinary challenges in the areas of structural dynamics, controls and multi-aperture phasing active optics. In meeting these challenges, emphasis is placed on modularity in spacecraft subsystems and optics as a means of allowing expandability and upgradeability. For the interferometer to function properly, unique methods of coherent wave front sensing are developed and used for error detection in control of the Fast Steering Mirrors (FSMs). The space environment is simulated by floating ARGOS on a frictionless air-bearing that allows it to track fast moving satellites such as the International Space Station (ISS), planets or point stars. A System Identification is performed on ARGOS to determine its dynamic properties and to design optimal controllers for the Attitude Control System (ACS). ACS sensors include an electronic compass with a 2-axis tip-tilt sensor, a viewfinder camera with centroiding algorithm, and a 3-axis rate gyroscope. Nonlinear, quaternion-based control is employed using reaction wheels as the spacecraft's actuators.

No full-text available

Request Full-text Paper PDF

To read the full-text of this research,
you can request a copy directly from the authors.

... Traditional simulator can also unload the gravity of each link of robot arm. MIT has built several 3-DOF (degree of freedom) air bearing simulators to test the control method of small satellites formation flight [5][6][7]. Those simulators can move on the horizontal plane and rotate around the vertical axis. ...
Article
Full-text available
In this paper, a simple and low-cost three-axis gimbal simulator is introduced. This simulator has been constructed in Amirkabir University of Technology and is used for implementation of attitude control algorithms of remote-sensing satellites in a real time condition using three reaction wheels as hardware in the loop test-bed. This simulator is modeled in Solidworks software package to determine its mass properties in order to utilize in obtaining the dynamic model of the simulator. Afterward, an attitude control algorithm is designed. Performance of the designed attitude control algorithm is investigated by implementing it on the simulator.
Article
Future spaceborne interferometric arrays must meet stringent optical performance and tolerance requirements while exhibiting modu- larity and acceptable manufacture and integration cost levels. The Mas- sachusetts Institute of Technology (MIT) Adaptive Reconnaissance Golay-3 Optical Satellite (ARGOS) is a wide-angle Fizeau interferometer spacecraft testbed designed to address these research challenges. De- signing a space-based stellar interferometer, which requires tight toler- ances on pointing and alignment for its apertures, presents unique mul- tidisciplinary challenges in the areas of structural dynamics, controls, and multiaperture phasing active optics. In meeting these challenges, emphasis is placed on modularity in spacecraft subsystems and optics as a means of enabling expandability and upgradeability. A rigorous theory of beam-combining errors for sparse optical arrays is derived and flown down to the design of various subsystems. A detailed elaboration on the optics system and control system is presented based on the per- formance requirements and beam-combining error tolerances. The space environment is simulated by floating ARGOS on a frictionless air- bearing that enables it to track both fast and slow moving targets. © 2004
Article
Air-bearing-based spacecraft simulators are widely used to develop and verify spacecraft control techniques required by modern spacecraft applications. To create a spacelike environment with ground spacecraft simulators, the effects of gravity should be minimized. For a spherical air-hearing system with 3 rotational degrees of freedom, the center of rotation of the spacecraft simulator should be exactly aligned with the center of gravity. This paper presents the automatic mass balancing method, which compensates for the center of gravity offset from the center of rotation by actuating three proof masses on linear motion stages. Adaptive control of the automatic mass balancing system is used while the balancing masses are actuated in real time. The proposed techniques are implemented on the ground-based three-axis spacecraft simulator for the bifocal relay mirror spacecraft.
Conference Paper
Full-text available
The Next Generation Space Telescope will depart from the traditional means of providing high optical quality and stability, namely use of massive structures. Instead, a benign orbital environment will provide stability for a large, flexible, lightweight deployed structure, and active wavefront controls will compensate misalignments and figure errors induced during launch and cool-down on orbit. This paper presents a baseline architecture for NGST wavefront controls, including initial capture and alignment, segment phasing, wavefront sensing and deformable mirror control. Simulations and analyses illustrate expected scientific performance with respect to figure error, misalignments, and thermal deformation.
Article
Full-text available
Citation MARCEL J. E. GOLAY, "Point Arrays Having Compact, Nonredundant Autocorrelations," J. Opt. Soc. Am. 61, 272-273 (1971) http://www.opticsinfobase.org/josa/abstract.cfm?URI=josa-61-2-272
Article
Full-text available
The diffraction-limited performances of synthetic aperture configuration arrays of four telescopes, used for coherent imaging or beam transmission, are calculated and compared. The optical performance of phased telescope arrays was found to be more sensitive to rms piston errors than to rms tilt errors. Image degradation due to pupil mapping errors imposes tight tolerances upon the structural integrity of the telescope. One part in 10,000 pupil mapping error limits the field-of-view to approximately 30 arcsec. Field curvature of the independent telescopes provides a fundamental limit to the field-of-view for phased arrays made up of two-mirror telescopes. These field-of-view limitations may profoundly affect target acquisition, tracking, or imaging applications.
Article
Full-text available
A nine telescope imaging phased array is being demonstrated at the Lockheed Martin Advanced Technology Center in Palo Alto. The sparse array consists of nine afocal telescopes arranged in a Y-formation that are combined to a common focus in a Fizeau interferometer configuration. We have demonstrated diffraction limited performance over a 150 microradian field of view with broad band (500 to 800 nm) illumi- nation. We have also used white light phase diversity wavefront sensing techniques to adjust the phasing of each separate telescope in a closed loop control, using point sources and extended imagery.
Article
This paper presents the Frequency Domain Observability Range Space Extraction (FORSE) identification algorithm. FORSE is a singular value decomposition based identification algorithm which constructs a state space model directly from frequency domain data. The concept of system identification by observability range space extraction was developed by generalizing the Q-Markov Covariance Equivalent Realization and Eigensystem Realization Algorithm. The numerical properties of FORSE are well behaved when applied to multi-variable and high dimensional structural systems. It can achieve high modeling accuracy by properly overparameterizing the system. The effectiveness of this algorithm for structural system identification is demonstrated using the MIT Middeck Active Control Experiment (MACE). MACE is an active structural control experiment to be conducted in the Space Shuttle middeck. Results of ground experiments using this algorithm will be discussed.
Article
A phased array telescope is an array of optical telescopes whose images are coherently combined so as to achieve the resolution of a single but much large telescope. Phased array telescopes deliver the resolution of very large telescopes without the difficulties and expenses associated with very large optics. To achieve this resolution, a wide field of view (FOV) phased array imaging system must accurately control phase and must superimpose the images from all telescopes to within a fraction of a resolution element over the whole FOV simultaneously. We built a test bed called the Multipurpose Multiple Telescope Testbed (MMTT). It consists of four 20-cm-aperture telescopes phased together with a +/- 15- arcmin FOV. It has no mount and is designed for laboratory use only. We present a brief description of the MMTT and then describe performance tests and results. The phasing and image superpositioning accuracy of the array were measured using star tests. Several of the resulting point spread functions were recorded simultaneously at three different field angles to determine the wide FOV performance of this phased array. These images were analyzed and compared to theoretical predictions.
Article
Cost and weight data for optical and radio telescopes are analyzed to derive scaling laws appropriate to the design and costing of very large telescopes of the future. A scaling law exponent close to the 2. 0 power of aperture diameter is found for telescopes of comparable sophistication ranging from a 0. 4 m to 5. 0 m aperture, in contrast to the often cited 2. 7 exponent. Predicted characteristics for a 25-meter aperture steerable dish Next Generation Telescope (NGT) are 5 multiplied by 10**6 kg, 20 /kg and a total cost of 1. 3 multiplied by 10**8 .
Article
After giving an account of coherent field-of-view (FOV) limitations in space optical interferometry, where the size of the field required is inferred from the number of photoevents and from stellar density, an examination is conducted of FOV limitations in both Michelson and Fizeau cases in order to ascertain their maximum. It is shown that, in all cases, the field is too small to include a reference star in the Michelson final-image field when the input pupil is excessively diluted; while this is not the case for the Fizeau case, the alignment tolerances are extremely severe. The problem of spatial frequency plane coverage is addressed, and a novel mission concept is proposed.
Article
In order to better understand the technological difficulties involved in designing and building a sparse aperture array, the challenge of building a white light Golay-3 telescope was undertaken. The MIT Adaptive Reconnaissance Golay-3 Opti-cal Satellite (ARGOS) project exploits wide-angle Fizeau interferometer technology with an emphasis on modularity in the optics and spacecraft subsystems. Unique design procedures encompassing the nature of coherent wavefront sensing, control and combining as well as various system engineering aspects to achieve cost effectiveness, are developed. To demonstrate a complete spacecraft in a 1-g environment, the ARGOS system is mounted on a frictionless air-bearing, and has the ability to track fast orbiting satellites like the ISS or the planets. Wavefront sensing techniques are explored to mit-igate initial misalignment and to feed back real-time aberrations into the optical control loop. This paper presents the results and the lessons learned from the conceive, design and implementation phases of ARGOS. A preliminary assess-ment shows that the beam combining problem is the most challenging aspect of sparse optical arrays. The need for optical control is paramount due to tight beam combining tolerances. The wavefront sensing/control requirements appear to be a major technology and cost driver.
Article
Recent studies show that an infrared nulling interferometer dedicated to the detection and spectroscopy of exoplanetary systems must fulfill three main requirements. It must provide very strong suppression of the light originating from the target star and good spectral coverage (from 6 to 18 μm) with a fixed baseline and must be able to distinguish planets from local dust disc emission without any ambiguity. We present here a solution with five 1.5 m class telescopes deployed in an elliptical array that meets all these constraints. The telescope array, whose dimensions are about 50 by 25 m, has been optimized so that the exozodiacal emission is strongly extinguished, very weakly modulated by rotation about the line of sight, and concentrated at a few even frequencies. The planet's signal, in contrast, is strongly modulated at many distinctive frequencies. A simple cross-correlation method recovers a single image of a solar system twin at 10 pc distance after about 30 hr of integration time. The spectroscopy of the planets can then be undertaken with the same baseline and would reveal absorption features of water, ozone, and carbon dioxide for an Earthlike planet at 10 pc in less than 1 mo.
Wide Field Performance of a Phased Array Telescope
  • De Hainaut
De Hainaut, C. R., et al, "Wide Field Performance of a Phased Array Telescope", Optical Engineering, vol. 34 No.3, March 1995.
CostScalingLawsApplicabletoVery LargeTelescopes
  • A B Meinel