Growth, spectroscopy and laser operation of Yb : KGd(PO3)(4) single crystals

Universitat Rovira i Virgili, Tarraco, Catalonia, Spain
Optics Express (Impact Factor: 3.49). 04/2007; 15(5):2360-8. DOI: 10.1364/OE.15.002360
Source: PubMed


Macrodefect-free single crystals of Yb-doped KGd(PO(3)), a noncentrosymmetric laser host which possesses second-order nonlinear susceptibility, were grown using the top seeded solution growth slow-cooling (TSSG-SC) technique, reaching a maximum ytterbium concentration in the crystal of approximately 3.2x10(20) at/cm(3). In order to evaluate the potential for self-frequency doubling, the dispersion of the refractive indices of KGd(PO(3))(4) was studied and Sellmeier equations were constructed which are valid in the visible and near-infrared. The Stark splitting of the two electronic states of ytterbium was determined from absorption and emission measurements at room and low temperatures, and this allowed to compute the emission cross sections at room temperature. The fluorescence decay time is quite long, 1.22+/-0.01 ms. Laser generation in the 1 mum range is demonstrated with this new Yb host for the first time. Although the maximum output power achieved, of the order of 100 mW, was limited by the available crystal size and doping level, the more than 55% slope efficiency obtained with this first sample is rather promising for the future.

Download full-text


Available from: Maria Cinta Pujol
  • [Show abstract] [Hide abstract]
    ABSTRACT: Summary form only given. Doped CeO2-based ceramics are the most promising substitute for the existing YSZ (yttria stabilized zirconia) as the electrolyte material for SOFCs (solid oxide fuel cells). Cerium oxide fine powders doped with different amounts of Gd, Sm and Y were synthesized from nitrate salts dissolved in water using a radio-frequency inductively coupled plasma reactor. An atomization probe was used to inject the solutions into the system, which was operated under vacuum using argon and oxygen as central and sheath gases, respectively. The effect of plasma operating parameters on particle synthesis was also investigated. Particle Ce and dopant composition was determined qualitatively using energy dispersive spectroscopy (EDS). X-ray diffraction measurements demonstrated that the amount of dopant for a given dopant did not affect the basic CeO2 crystalline lattice. Measurements of crystal size by peak broadening suggested that dopant additions retarded crystal growth. SEM micrographs showed three different types of particles and size distribution ranges that were later confirmed using laser diffraction to measure particle size.
    No preview · Article · Jan 2004 · IEEE International Conference on Plasma Science
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: With the growing interest for broadband mobile services in mobile communication networks, the investigation of radio transmission in and into buildings is getting more important. Popular empirical and deterministic models for the propagation inside buildings compute the Field strength based on the inner structure of the buildings (walls, furniture). But for current and future wireless networks (3G, B3G, W-LAN, WiMax,..), the neighboring buildings must also be considered to avoid interference problems in these buildings. Additionally the indoor coverage of outdoor transmitters must be analyzed to guarantee a high QoS even inside buildings. A new concept for the prediction of the field strength in such hybrid scenarios (urban and indoor) is presented in this paper. This new concept does not rely only on the direct ray (like empirical models) and it does not consider hundreds of rays for a single radio link (like ray tracing). The new model focuses on the most dominant path(s) between transmitter and receiver. The parameters of these paths are determined (e.g. path length, number and type of interactions, material properties of objects, ...) and are used for the prediction of the path loss. This model allows also the computation of the transition from an urban to an indoor scenario and vice versa, thus allowing an accurate computation of the received power inside and around buildings. For the validation of the new model, measurements were made
    Preview · Conference Paper · Oct 2005
  • [Show abstract] [Hide abstract]
    ABSTRACT: We report on continuous-wave lasing of Yb(3+) at room temperature in the noncentrosymmetric RbTiOPO(4) crystal, codoped with Nb(5+), for all three possible polarizations. A maximum output power of 154 mW at 1050 nm was obtained for an absorbed power of 386 mW. The highest slope efficiency reached approximately 60% and the lowest threshold (with respect to the absorbed power) was 18 mW. The laser was tunable from 1009 to 1081 nm.
    No preview · Article · Aug 2007 · Optics Letters
Show more