No full-text available
To read the full-text of this research,
you can request a copy directly from the authors.
The Workshop Management Control System Design to Business Information Technology
Abstract
Through the analysis of Chinapsilas modern enterprise information problems and taking one enterprise as the example, the article introduced a business information technology workshop management controller functions on the basis of the analysis. The author designed and developed the workshop management controller, realized some kinds of features, such as production plan, artwork, working hours, the acceptance of materials, preparation and management, production orders issued, the production of feedback information, statistics production, and so on.
Composite fluorocarbon/ZnO films were deposited by RF sputtering, using polytetrafluoroethylene and Zn targets, on polyethylene terephthalate substrates. Argon and oxygen were used as working and reacting gases, respectively, with an oxygen:argon volume ratio of 3:1. The films were characterized by X-ray Photoelectron Spectroscopy, Fourier Transform Infrared Spectroscopy and static contact angle measurements. It was found that the deposited films are made up of the four components –CF3, –CF2–, –CF– and –C–. The proportions of the four components varied with sputtering conditions. There was a large number of C=C double bonds on the surface of deposited films. The static contact angle of the deposited films was greater than 90°, indicating excellent hydrophobicity. The contact angle of films decreased after washing, and the washing fastness of the composite films were slightly inferior to those of the fluorocarbon films.
With the hope to provide an effective approach for personalized diagnosis and treatment clinically, Traditional Chinese Medicine (TCM) is being paid increasing attention as a complementary and alternative medicine. It performs treatment based on ZHENG (TCM syndrome) differentiation, which could be identified as clinical special phenotypes by symptoms and signs of patients. However, it caused skepticism and criticism because ZHENG classification only depends on observation, knowledge, and clinical experience of TCM practitioners, which is lack of objectivity and repeatability. Scientists have done fruitful researches for its objectivity and standardization. Compared with traditional four diagnostic methods (looking, listening and smelling, asking, and touching), in this paper, the applications of new technologies and new methods on the ZHENG differentiation were systemically reviewed, including acquisition, analysis, and integration of clinical data or information. Furthermore, the characteristics and application range of these technologies and methods were summarized. It will provide reference for further researches.
Internal control problems and improvement of existing measures
- Tang Jun-Yu
Private internal management and control of small enterprises
- Luo Dong-Min
China's private enterprise groups, mother and son management control mode of choice
- Zhu Mei-Guang
On the corporate cost control
- Zhang Zeng-Guo
Preliminary Research on the Informatization Management System Information of China Machinery Industry
- Zhu Zhang Gen-Bao
- Ren Yu-Qing
- Xian-Lin Etal
A Study on the Fit between Organizational Structure and Governance Characteristic in Diversified Firm
- Dun Yue-Xia
- Xue You-Zhi