Article

Simple and cost-effective thickness measurement terahertz system based on a compact 155 μm λ/4 phase-shifted dual-mode laser

Optics Express (Impact Factor: 3.49). 11/2012; 20(23):25990-9. DOI: 10.1364/OE.20.025990
Source: PubMed

ABSTRACT

A simple thickness measurement method based on the coherent homodyne CW THz system was demonstrated; it does not require precise control of the frequencies of the beat source, and only accurate scanning of the optical delay line is needed. Three beat frequencies are sufficient for measuring the thickness of a sample without considering the modulo 2π ambiguity. A novel compact 1.55 μm λ/4 phase-shifted dual-mode laser (DML) was developed as an optical beat source for the CW THz system. The thickness of a sample was accurately estimated from the measurements using the proposed method. Our results clearly show the possibility of a compact, simple, and cost-effective CW THz system for practical applications.

Download full-text

Full-text

Available from: Kiwon Moon, Nov 20, 2014
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: Three-dimensional (3D) terahertz (THz) imaging or THz tomography has recently proven to be useful for nondestructive testing of industrial materials and structures. In place of previous imaging techniques such as THz pulsed/continuous-wave radar and THz computed tomography, we propose a THz optical coherence tomography using photonics- and electronics-based THz sources, and demonstrate thickness measurement and tomographic imaging in frequency regions from 400 to 800 GHz. (C) 2014 Chinese Laser Press
    Full-text · Conference Paper · Jan 2013
  • [Show abstract] [Hide abstract]
    ABSTRACT: We demonstrate the tunable continuous-wave (CW) terahertz generator based on the λ/4 phase-shifted 1.3 μm dual-mode laser diode (DML) and travelling-wave photodiode (TWPD). The DML and TWPD operate as an optical beat source and terahertz photomixer, respectively. The laser diodes (LDs) operating at the 1.3 μm have more suitable characteristics as optical beat sources than the LDs operating at 1.55 μm because of their high efficiency and better thermal stability. The micro-heaters are integrated on top of each DFB LD for mode beat frequency tuning. The fabricated DML was continuously tuned from 230 GHz to 1485 GHz by increasing the temperature of each DFB section independently via integrated micro-heaters. The high-speed TWPD with an InGaAs absorber was designed and fabricated to efficiently generate the photomixing terahertz CW. A complementary log-periodic antenna was integrated with the TWPD to radiate the generated terahertz wave with minimum reflection in the wide frequency range. The terahertz characteristics of the tunable CW terahertz generator based on the DML and TWPD were measured in a fiber-coupled, homodyne terahertz photomixing system. Our results of the tunable CW terahertz generator show the feasibility of a compact and highly efficient CW terahertz spectrometer and imager.
    No preview · Article · Mar 2013 · Proceedings of SPIE - The International Society for Optical Engineering
  • [Show abstract] [Hide abstract]
    ABSTRACT: We have developed a 1.3 μm phase-shifted dual-mode laser diode (pDML) for a tunable continuous-wave terahertz (CW THz) emitter. The mode beat frequency of the pDML is continuously tuned from 250 to 1480 GHz by introducing monolithically integrated micro-heaters and multiple sections to an all-active structure. The pDML shows a narrow spectral linewidth and a strong four-wave mixing signal throughout the entire tuning range. By combining InGaAs based photomixers, we have successfully generated continuous-wave THz radiation, and confirmed the precise beat frequency settings and fast sweeping of this. This pDML operating at 1.3 μm shows excellent performance in terms of THz conversion efficiency, tuning range and thermal stability.
    No preview · Article · Jun 2013 · Laser Physics Letters
Show more