Content uploaded by Karen Maas
Author content
All content in this area was uploaded by Karen Maas on Oct 27, 2020
Content may be subject to copyright.
Social Impact Measurement: classification of methods
Karen Maas, PhD*, Department of Business Economics, Erasmus
University Rotterdam, maas@ese.eur.nl
Kellie Liket, Msc, Erasmus Centre for Strategic Philanthropy, Erasmus
University Rotterdam, liket@ese.eur.nl
Abstract
This paper analyses and categorizes thirty contemporary social impact
measurement methods. These methods have been developed in response to the
changing needs for management information resulting from increased interest of
corporations in socially responsible activities. The social impact measurement
methods were found to differ on the following dimensions: purpose, time frame,
orientation, length of time frame, perspective and approach. The main
commonalities and differences between the methods are analysed and the
characteristics of the methods are defined. The classification system developed in
this paper allows for managers to navigate their way through the landscape of
social impact methods. Moreover, the classification clearly illustrates the need for
more social impact methods that truly measure impact, take an output orientation,
and concentrate on longer term effects. Furthermore, this paper discusses the lack
of consensus in defining social impact. The paper concludes with a brief
discussion on theoretical and practical implications.
1
1. Introduction
In the last decade responsible corporate behaviour has been a major topic of both
academic and public discourse. Consequently, tools have been developed for both
the managing and reporting of the wide range of corporate responsibility activities.
This paper outlines a classification system for the categorization of contemporary
measurement methods developed to measure social impact. The term social impact
is used for the impact of a corporation on society on the economic, environmental
and social dimension. Whereas environmental accounting methods have been
embraced by both academic analysis and a wide range of corporations (Burritt and
Saka 2006, Schaltegger et al. 2002), the landscape of social impact methods has
yet to be categorized. The purpose that the categorization performed in this paper
serves is twofold. Firstly, it allows for the analysis of status quo of the social
impact methods for corporate social responsibility (CSR). Secondly, it aids the
CSR manager in the navigation through the wide range of existing tools.
Analogous to financial accounting methods, environmental and social accounting
methods aim to measure the impact of corporate activities on society. Such social
and environmental impacts are often not expressed by the market, do not have a
market value and are therefore often ignored by corporations (Elkington 1999,
Schaltegger and Burritt 2000, Lamberton 2005). However, accounting methods
provide crucial information for managerial decision-making (accounting for
decision-making) and for internal and external reporting (accounting for control)
(Zimmerman 2009). Whereas environmental accounting methods are relatively
widespread, as shown by their frequent occurrence in annual reports, CSR
activities often extend to more numerous dimensions than the environmental one,
with impact on both the economy and society. The lack of consensus on the
definition of social impact and the best way to measure it hampers both the
academic debate on social impact, as well as the usage of social impact methods
(Maas and Boons 2010). This paper is a first attempt at increasing the consensus
by analysing social impact and categorizing the contemporary social impact
methods.
2. From a single towards a multiple bottom line
Although CSR is widely used, numerous terms refer to the social behaviour of
corporations, such as community involvement, corporate responsiveness,
corporate citizenship, corporate social performance, and many others (Matten et al.
2003, de Bakker et al. 2005, Maas and Bouma 2005). Nevertheless, all terms refer
to actions that have been defined by McWilliams and Siegel (2001:117) as ‘...an
action that appears to further some social good, beyond the interest of the
corporation and that which is required by law’. It is important to recognize that
these actions are not specific to the private sector (Clark et al. 2004), as both
2
governments and non-profit organisations undertake actions to provide value for
society. The demands for more tangible accountability in these sectors have also
increased their attention on the need for social impact methods (London 2009).
Traditionally, it was believed that value is either economic (created by for-profit
organisations) or social (created by non-profit or nongovernmental organisations)
(Weisbrod 1988, Ben-Ner and Hoomissen 1992). In alignment with this belief it is
not surprising to find that social impacts are often not explicitly included in
valuation studies or are even ignored. Moreover, existing research puts most
emphasis on the business case or the payback results of social initiatives for
corporations, instead of an emphasis on the impact of social initiatives (Fry et al.
1982, Margolis and Walsh 2003, Juholin 2004, Aguilera et al. 2007). However,
Emerson (2003) finds that, more recently, the number of mainstream corporate
CEOs discussing the social and environmental impacts of their corporations as a
strategy for increasing the total value of their corporations has increased.
Elkington (1999) has predictions of the evolution of win-win thinking in business
providing support for a more active attitude towards CSR. A similar integrated
approach to CSR is the triple bottom line (TBL) concept. The TBL concept
focuses on value creationi across the three dimensions of sustainability; the
economic, social and environmental dimensions. Although this concept has been
widely used, the interpretation of value creation differs among users; some
interpret TBL as a zero-sum game while others interpret TBL as an optimisation
game of blended value (Emerson 2003). The idea behind the blended value is that
all corporations, whether for-profit or not, create value that consist of economic,
social and environmental value components; and this value is itself non-divisible
and, therefore, a blend of these three elements (Ann et al. 1999, Elkington et al.
2006). Consequently, the challenge for any organisation, non-profit,
nongovernmental or for-profit, is to optimize impacts on several dimensions
instead of maximizing impacts against any single dimension.
Over time, the movement towards a more integrated approach towards value
creation by corporations has shifted from a more defensive to a more
encompassing approach. Under numerous external pressures, originating from
stakeholders such as consumers, rating agencies and governments, corporations
gradually changed their attitudes towards CSR (see Figure 1). Whereas the 1970s
were characterized by defensive attitudes, in the 1980s corporations started to
work with environmental managers. It was not until the 1990s that the attention for
CSR in process and product design grew, extending the involvement to marketing
managers. In the 2000s CSR entered the board rooms and required the
involvement of CEOs. Elkington et al. (2006) predict that in the future
involvement will extend to CFOs, investment bankers and venture capitalists.
3
Figure 1: Internal involvement in the corporate goals (based on Elkington et
al. 2006)
It is important to note that the involvement of a wide variety of constituents within
the corporation does not guarantee socially responsible behaviour. The debate on
the intentions of corporations in their engagement in CSR can be categorized in
three perspectives. Whereas the first perspective faithfully pursues Friedman’s
argument that a business its business is business (Friedman 1970, Matten et al.
2003), the opposite perspective points to the good intentions of corporate leaders
or CSR managers (e.g. Husted and Salazar 2006, Porter and Kramer 2006). The
third perspective takes a middle-way in that it attempts to integrate good intentions
with financial gains, by pointing out the indirect benefits of CSR through
employee satisfaction or corporate reputation (Margolish and Walsh 2003).
Regardless of the perspective taken, it is reasonable to assume that corporations
have an interest in social impact measurement for reporting and decision making
purposes. In the latter case, social impact measurement allows for a first step in the
process towards optimising value on multiple dimensions. For corporations, but
also for their investors, relatively standardized measurement and reporting
guidelines have been developed that provide clear insight into the financial
efficiency of a corporation. Measuring the impact upon the society, however,
remains a much greater challenge.
3. Definitions of social impact
The lack of consensus on the definition of social impact causes confusion and
hampers the ability to study the phenomenon. Variations are found between the
various academic fields such as business and society studies, management
accounting, and strategic management. An overview of a number of definitions
can be found in Table 1 (e.g. Latané 1981, Burdge and Vanclay 1996). Main
differences are found in the usage of words such as ‘impact’, ‘output’, ‘effect’ and
‘outcome’. Moreover, the term social impact is often replaced by terms such as
‘social value creation’ (Emerson et al. 2000) and ‘social return’ (Clark et al. 2004).
4
1970s
Lawyers,
public relations
1980s
Environmental
managers
1990s
Process and
product design,
marketing,
managers
2000s
CEOs, boards,
investor
relations
Tomorrow
CFOs,
investment
bankers, venture
capitalists
Term Definition
Social impact
(Burdge and
Vanclay 1996)
By social impacts we mean the consequences to human populations of
any public or private actions that alter the ways in which people live,
work, play, relate to one another, organise to meet their needs and
generally act as a member of society.
Social impact
(Latané 1981)
By social impact, we mean any of the great variety of changes in
physiological states and subjective feelings, motives and emotions,
cognitions and beliefs, values and behaviour, that occur in an
individual, human or animal, as a result of the real, implied, or
imagined presence or actions of other individuals.
Impact
(Clark et al.
2004)
By impact we mean the portion of the total outcome that happened as a
result of the activity of the venture, above and beyond what would
have happened anyway.
Social Value
(Emerson et al.
2000)
Social value is created when resources, inputs, processes or policies are
combined to generate improvements in the lives of individuals or
society as a whole.
Social Impact
(Freudenburg
1986)
Social impact refers to impacts (or effects, or consequences) that are
likely to be experienced by an equally broad range of social groups as a
result of some course of action.
Social Impact
(Gentile 2000)
Social impacts are the wider societal concerns that reflects and respects
the complex interdependency between business practice and society.
Social Impact
(IAIAii by
Wikipedia
2009)
Social impacts are intended and unintended social consequences, both
positive and negative, of planned interventions (policies, programs,
plans, projects) and any social change processes invoked by those
interventions.
Table 1:Definitions of social impact and related terms
Here, the definition of Social Impact as developed by Clark et al. (2004) is used;
‘by impact we mean the portion of the total outcome that happened as a result of
the activity of an organisation, above and beyond what would have happened
anyway.’
This definition is based on the so called Impact Value Chain (see Figure 2) and is
used to differentiate outputs from outcomes and impacts. By including ‘what
would have happened anyway’ in the definition, the use of a benchmark or
counterfactual is inferred. Differentiation between the elements of the social value
chain illustrate the conceptualisation of the idea that impacts are different from
outputs. While outputs and outcomes are related to the provider of the product,
activity or service, impacts are associated with the user (Kolodinsky et al. 2006). It
is important to note that impacts include intended as well as unintended effects,
negative as well as positive effects and both long term and short term effects
(Wainwright 2002). Ideally, evaluation of the impact is utilized to inform goal
alignment.
5
Figure 2: Impact value chain (adapted from Clark et al. 2004)
4. Developments in performance measurement
From an economic perspective, the purpose of economic behaviour is believed to
be the maximisation of wealth or profit, attained by the management of scarce
resources in the best possible manner. Therefore, emphasis is placed on the need
for managers to seek efficient outcomes (Burritt and Saka 2006). Efficiency
measures the relation between outputs and inputs to a process. The higher the
output for a given input, or the lower the input for a given output, the more
efficient the activity, product, or corporation is. The general understanding of both
investment and return is founded upon a traditional separation of social value and
economic value. However, the pursuit of a blended value is for investments and
returns not to separate social and financial impacts, but to be composed of both
(Emerson 2003).
Conventional performance measurement is often based on the so-called goal-
attainment approach and does not usually consider social or environmental
questions. The assumption that underlies the goal-attainment approach is that the
goals of an organisation are identifiable and unambiguous (Forbes 1998). An
organisation’s effectiveness is represented by the attainment or progress towards
these organisational goals. Attaining organisational goals such as increasing
production, increasing profit or reducing costs, can be researched by using
conventional performance measurement methods. Including impact upon society
along various dimensions - economic, environmental, social – of performance
measurement complicates the ability to identify, measure and value these impacts.
While generally accepted principles of financial accounting are established to
6
Input Activities Output Goal
alignment
Changes to social systems
-
= IMPACT
Outcomes
What would have
happened anyway
measure and report on the economic impact at an organisational level, comparable
standards for measuring the impact upon society have yet to be developed (Maas
and Bouma 2005). Consequently, current practice in performance measurement
tends to focus on measuring only a part of the total impact that organisations have
on society.
In order to develop this integrated blended value perspective accounting methods
would have to integrate all three dimensions. In 1991, Eccles (1991) envisaged the
start of a revolution in performance measurement and predicted that ‘within the
next five years, every corporation will have to redesign how it measures its
business performance’ (p. 131). Corporations traditionally have relied almost
exclusively on financial measures of performance (Ittner and Larcker 1998). New
strategies and competitive realities demand new measurement systems for
integrating social dimensions of corporate performance.
New information systems and processes capable of measuring the creation of
value in this changed context are needed. One step forward is to look beyond our
traditional financial, monetary and quantifiable measures of impacts of activities,
and start to explore and incorporate methodologies borrowed from other
disciplines, such as sociology. Corporations judge their success on the basis of the
tasks completed and milestones achieved – the amount of money invested,
quantity of products distributed, and so on – rather than on how well their
activities translate into changes on the ground (London 2009). Impacts can be
measured at different levels, the individual level, the corporation level, and the
societal level. The integration of social impact into the processes of decision
making, planning and problem solving requires an innovative and interdisciplinary
approach. Behind the scenes, scientists, practitioners, and consultants develop
improved (multidisciplinary) methodologies for assessing impacts against the
double bottom line, the triple bottom line, or other concepts linked to multi-
dimensional value creation. An overview of methods is provided in the next
section.
5 Social impact measurement
5.1. Absence of a categorisation
Despite the practical and theoretical importance of categorising social impact
measurement methods, a system to do so has not yet been developed. Multiple
reasons could have contributed to this absence. For one, social impacts are often
difficult to measure and quantify. This is because of the qualitative nature of social
impact, which makes it hard to attach an objective value to the impact and to sum
7
the various qualitative expressions of impact. Secondly, corporations can have a
positive or negative impact upon the society along several dimensions: the
environmental dimension, economic dimension and social dimension. Similarly,
this can cause problems with adding the various impact dimensions. Thirdly, social
impact includes short term as well as long term effects on society. Moreover, many
components can contribute to economic, environmental and social impact.
Consequently it is often hard to link activities and impact because of difficulties
with attribution and causality questions. Currently, no widely accepted scientific
approach to attribution and causality questions in impact measurement exists.
Lastly, the greatest difficulty might be the challenges around finding a consensus
on the definition of social impact. Whereas some researchers solely refer to social
impact when it includes positive, negative, intended and unintended effects, others
solely refer to the intended positive effects (Boyne 2002, Ebrahim 2005).
Moreover, consensus is absent on the use of a counterfactual or benchmark, and
whether or not social impact by definition requires data collection in a
participatory manner.
5.2An overview of methods
From the 1990s onwards, many methods have been developed to measure social
impact. Literature research, internet search and expert information resulted in a list
of thirty quantitative (social) impact measurement methodsiii (see Table 2) (e.g.
Schaltegger et al. 2002, Clark et al. 2004, Epstein 2008). Quantitative methods are
needed for corporations to make intangible results more tangible and to use social
impact measurement for decision-making and control issues. This list is not
intended to be exhaustive, but provides an overview of social impact measurement
methods.
Several methods have been developed by, or for, non profit or governmental
corporations. Examples (see Table 2) are SROI, OASIS, SCBA, and LEM. Other
methods are mainly developed for, and used by, for-profit corporations. Examples
are SRA, ACAFI, TBL, MIF, and BACO. Although a method might initially have
been developed for a certain kind of organisation, the method could be used and
adapted by other kinds of organisations. The use of SROI is a good example of this
phenomenon. This method was initially developed for non-profit organisation and
is currently increasingly used by profit corporations. Next to these quantitative
impact measurement methods several corporations, non-government
organization’s (NGO’s) and associations developed guidelines or frameworks,
often based on one or more existing methods, on how to measure social impact. A
few examples are the ‘guidance document for the oil and gas industry’ (IPIECA
2008) and two guidelines developed by Shell (Shell 2008a, 2008b).
8
(Social) Impact measurement methods
1. Acumen Scorecard
2. Atkinsson Compass Assessment for Investors (ACAFI)
3. Balanced Scorecard (BSc)
4. Best Available Charitable Option (BACO)
5. BoP Impact Assessment Framework
6. Center for High Impact Philanthropy Cost per Impact
7. Charity Assessment Method of Performance (CHAMP)
8. Foundation Investment Bubble Chart
9. Hewlett Foundation Expected Return
10. Local Economic Multiplier (LEM)
11. Measuring Impact Framework (MIF)
12. Millennium Development Goal scan (MDG-scan)
13. Measuring Impacts Toolkit
14. Ongoing Assessment of Social Impacts (OASIS)
15. Participatory Impact Assessment
16. Poverty Social Impact Assessment (PSIA)
17. Public Value Scorecard (PVSc)
18. Robin Hood Foundation Benefit-Cost Ratio
19. Social Compatibility Analysis (SCA)
20. Social Costs-Benefit Analysis (SCBA)
21. Social Cost-Effectiveness Analysis (SCEA)
22. Social e-valuator
23. Social Footprint
24. Social Impact Assessment (SIA)
25. Social return Assessment (SRA)
26. Social return on Investment (SROI)
27. Socio-Economic Assessment Toolbox (SEAT)
28. Stakeholder Value Added (SVA)
29. Toolbox for Analysing Sustainable Ventures in Developing Countries
30. Wellventure Monitor
Table 2:Overview of social impact measurement methods
5.3 Characteristics of methods
There is a need for a wide range of methods tailored to the requirements of
different types of corporations, depending on their activities, objectives and the
aspects of impacts they want to measure. Next to this, there is no single tool or
method that can capture the whole range of impacts or that can be applied by all
corporations. The multitude of existing social impact measurement methods is
confusing for managers when selecting a methods or academics when analysing
9
the progress in social impact measurement. Existing measurement methods do not
show a common understanding of what to measure, why or for whom to measure,
or how to measure.
Borrowing insights from environmental accounting for a system to categorise
measurement methods, four suggestions for categorisation can be found:
Schaltegger et al. (2000) develop a framework for the instruments of
environmental accounting
Loew et al. (2001) and Loew (2003) systematise cost concepts by combining
environmental impact and environmental costs
Clark et al. (2004) categorise measurement methods into three: process
methods, impact methods and monetarisation methods
The US-EPA (1995) publishes a study with key concepts and terms related
to environmental accounting.
Specifications of these systems might be useful to characterise social impact
methods. From careful analysis it is found that the framework as developed by
Schaltegger et al. (2000) and the categorisation from Clark et al. (2004) are useful
to the categorisation of social impact methods. The other frameworks focus more
on output and cost relations (Loew et al. 2001), or on concepts and terms (US-EPA
1995) instead of classification of methods. Schaltegger et al. (2000) distinguish
five dimensions of environmental accounting methods:
(1) information type; monetary versus physical
(2) scope; internal versus external
(3) length of time frame; short term focus versus long term focus
(4) time frame; past orientated versus future orientated
(5) routineness of information; routinely generated information versus ad hoc
information.
From this categorisation the time frame and length of time frame dimensions are
relevant for the categorization of social impact methods. From Clark et al. (2004)
the categorisation towards the approach to methods is relevant for the
categorization of social impact methods.
10
As a result, it is found that methods differ on the following dimensions: purpose,
time frame, orientation, length of time frame, perspective and approach. Table 3
provides an overview of method characteristics relevant for method
selection.
Characteristics Types
Purposes Screening
Monitor
Reporting
Evaluation
Time frame Prospective
Ongoing
Retrospective
Orientation Input
Output
Length of Time frame Short term
Long term
Perspective Micro (Individual)
Meso (Corporation)
Macro (Society)
Approach Process Methods
Impact Methods
Monetarisation
Table 3:Characteristics of social impact measurement methods.
Purpose
Measurement methods can be developed for different purposes depending on what
it is intended to measure. Methods that are particularly suited for (a) screening, (b)
monitoring, (c) reporting and (d) evaluation were identified. Methods suited for (a)
screening facilitate evaluation of investment opportunities and of their
performance with respect to investors’ specific social and financial objectives.
Methods suited for (b) monitoring assist management with ongoing operational
decision-making and provide data for investor oversight. It may also help
entrepreneurs to identify business model modifications or market opportunities.
Methods for (c) reporting are particularly useful to report to external stakeholders,
such as potential investors, the public or other entities that require or request
performance reports on a regular basis. Methods for (d) evaluation may be used
for retrospective, ex-post impact assessment of achievements for academic
purposes but also for organisational learning.
11
Time frame
Methods may use a different time frame for the assessment. Some methods can be
applied prospectively to assess impacts which can, for example be expected from
planned reforms and programs. Those methods have the ability to open up space
for different options, support the design of mitigation measures and modifications,
and assist decision makers in choosing the options which best fit (IPC 2008).
Methods can also be developed with a focus on ongoing or retrospective purposes.
Methods focusing on the ongoing events are useful for testing assumptions along
the way. Retrospective methods are useful for evaluation of past activities.
Orientation
Methods can have either an orientation on the inputs or an orientation on the
outputs. Input orientated methods are useful to assess differences in input (for
example expenditure saved by increased employee satisfaction) as a result of a
social activity. Output orientated methods, on the other hand, are useful to assess
differences in output as a result of a social activity (for example a better
reputation).
Length of Time frame
Methods can have a length of time frame focusing on the long term or on the short
term. In more traditional measurement methods the focus is normally on the short
term. However, for social impact measurement, both a short term and a long term
focus can be needed. Impacts often do not occur in total after a short time; it can
take a long time before social impacts occur. An example is the global warming
effects resulting from greenhouse gasses.
Perspective
Measurement methods can use a different perspective. Measurement methods
originating from, for example, business measurement, social science evaluation,
policy or program evaluation all use different perspectives. An initial inventory
shows that social impact measurement from a business (micro) perspective does
include, for example, different indicators than social impact measurement from a
(macro) socio-economic perspective (Maas and Bouma 2005). Depending on the
perspective used, different indicators will be used and therefore different impacts
will be measured. Consequently, the perspective used is decisive for the results of
the measurement.
Approach
Methods can have different approaches to measuring social impact. In the
literature, three broad categories are defined: process methods, impact methods
and monetarisation methods (Clark et al. 2004). Process methods monitor the
efficiency and cost-effectiveness of ongoing operational processes. As such, they
do not provide an absolute measure of social returns. However, outputs can be
12
evaluated by the extent to which they correlate with, or cause desired social
outcomes. Impact methods measure operational outputs and their impact, i.e. the
incremental outcome beyond and above what would have happened if the
organisation did not exist. Impact can be measured in several ways. There are
methods that measure impact by linking Corporate Social Performance (CSP) and
Corporate Financial Performance (CFP) (McWilliams and Siegel 2000, Margolis
et al. 2003, Dentchev 2004). Another example of impact methods is the so called
3P approach where the economic dimension (Profit), social dimension (People)
and environmental dimension (Planet) are all measured in their own unit
(Elkington 1999, Labuschagne et al. 2005, GRI 2006). Next to this, monetarisation
methods quantify social and environmental indicators and translate those
indicators into a monetary value to be comparable with traditional financial data
(Lamberton 2005, Pearce et al. 2006). A comprehensive overview of several
monetarisation methods can be found in the environmental economic literature
(Pearce et al. 1994, Pearce et al. 2006).
5.4 Classification of methods
All methods are classified based on the characteristics as specified in the previous
section. The classification is based on descriptions of the individual toolsiv
provided by the developers, researchers or obtained from the internet. The results
are shown in Tables 4a and 4b.
The table shows the characteristics of the different methods. By doing this it can
be easily seen for which purpose the different methods can be used (screening,
monitoring, reporting and evaluation). Next to this, the table shows which time
frame, orientation, length of time frame, and perspective the methods adopt.
Finally, the approach used by the methods can be observed.
13
Characteristics Types
1. Acumen scorecard
2. ACAFI
3. Balanced Scorecard
4. BACO
5. BoP Impact
Assessment Framework
6. Center for high
impact philanthropy
cost per impact
7. CHAMP
8. Foundation
Investment Bubble
9. Hewlett Foundation
Expected Return
10. Local Economic
Multiplies
11. Measuring Impact
Framework
12. MDG-scan
13.Measuring Impacts
Toolkit
14. OASIS
15. Participatory
Impact Assessment
Purposes Screening X - X X X X - - X X X - - - X
Monitoring X X X X X X - - - - X - - X X
Reporting X X X X X X X X - - X X - X X
Evaluation - - X - X X X X - X X X X X X
Time Frame Prospective X X X X X X - - X X X - - - X
Ongoing X X X X X X - X - - X - - X X
Retrospective - - X X X - X X - X X X X X X
Orientation Input X X - X X X X - - X X - X X X
Output - - X - - - - X X - - X - X -
Length of Time
Frame
Short Term X X X X X X X X X X X X X X X
Long Term X X - - - X - - - - X - - - X
Perspective Micro (Individual) - X - - X X X X X X - - X X X
Meso
(corporation)
X X X X X - - - - X X - X - -
Macro (society) - - X X X X X X X - X X X X X
Approach Process methods X X X X X X X X X X X X X X X
Impact methods - - O - X - - - - X O - X X
Monetisation - - - X - - - - - X - - X X -
Characteristic of tool; X: yes, O: partially, -: no
Table 4a: Classification of social impact measurement tools.
14
Characteristics Types
16. PSIA
17. Public Value
Scorecard
18. Robin Hood
Foundation Benefit-
cost ratio
19. SCA
20. SCBA
21. SCEA
22. Social e-valuator
23. Social Footprint
24. SIA
25. Social Return
Assessment
26. SROI
27. SEAT
28. SVA
29. Toolbox for
Analysing
Sustainable Ventures
30. Wellventrue
Monitor
Purposes Screening X - X X X - - X X X - - - X -
Monitoring - X - X - - X X X X X X - X -
Reporting X X X - X X X X X X X X - X X
Evaluation X - X X X X X X X X X X X X X
Time Frame Prospective - X X X X - - X X X - - - X -
Ongoing - X X X X - X X X X X X - - -
Retrospective X - X - X X X X X X X X X X X
Orientation Input X X - X X X X - X X X X - X -
Output - - X - - - - X - - - - X - X
Length of Time
Frame
Short Term X X X X X X X X X X X X - X -
Long Term X - X - X X - X - - - - - X X
Perspective Micro (Individual) X - - - - - X X - X X - - X X
Meso (corporation) - X - X - - - X - X - X X X X
Macro (society) X X X X X X O X X X O X X X
Approach Process methods X X X X X X X X X X X X X X X
Impact methods X - X - X - O - X - O - - - -
Monetisation - - X - X X X - - X X - X O -
Characteristic of tool; X: yes, O: partially, -: no
Table 4b: Classification of social impact measurement tools.
15
Purpose
Almost all of the thirty methods can be used for multiple purposes. More than half of the
methods (17/30) allow for (a) screening purposes, facilitating an evaluation of investment
opportunities or performance relative to the investor’s social and financial objectives. A
similar number of methods (18/30) can be used to (b) monitor social impact. In almost half of
the cases (10/17) the two purposes of monitoring and screening overlap with one another. A
much more dominant purpose of the social impact measurement methods is (c) reporting
(24/30), which signals that measuring social impact is regularly motivated by the need to
report to external stakeholders. Lastly, the most dominant purpose (25/30) of social impact
methods is (d) evaluation. The (13) measuring impacts toolkits and the (28) SVA are solely
evaluation tools. However, five of the methods allow for evaluation and reporting; (7)
CHAMP, (8) Foundation Investment Bubble, (12) MDG – scan, (21) SCEA and (30)
Wellventure Monitor. The (10) Local Economic Multiples allows for both evaluation and
screening. Nine (in Table numbers 3, 5, 6, 11, 15, 23, 24, 25 and 29) out of the thirty (9/30)
measures can be used for all purposes of (a) screening, (b) monitoring, (c) reporting and (d)
evaluation.
Time Frame
The social impact measurement methods most often allow for the use of different time
frames. In nine out of thirty methods (9/30) only a retrospective time frame can be taken. As
expected, in all cases these methods have the purpose of evaluation, sometimes in
combination with other purposes. Only (9) Hewlett Foundation Expected Return takes solely
a prospective time frame, as its purpose is screening of the investment. The methods that
allowed for the use of all purposes (9/30) also allow for the use of all time frames in most
cases (10/30 allow for all time frames), except for (29) Toolbox for Analysing Sustainable
Ventures and (6) Centre for high impact philanthropy cost per impact . None of the twenty
methods that take an ongoing perspective allow for either a prospective or retrospective time
frame.
Orientation
Only one method (14) OASIS, has an orientation on both inputs and outputs for social
activity. Most methods look at the differences in inputs that result from a social activity
(21/30). Only eight methods (8/30) look at the differences in output as a result of the social
activity. These methods with an output orientation also always take a retrospective time
frame.
Length of Time Frame
Less than half of the methods (12/30) take a long term frame of time. All methods except for
(28) SVA, which specifies no length of time frame, and the (3) Wellventure Monitor, which
solely takes a long term time frame, also measure social impact for the short term.
Perspective
Six methods (6/30) can analyse social impact from a micro, meso and macro perspective.
These are often methods that also allow for all time frames and purposes. Next to these
methods, another eleven methods (in total 17/30) take a micro perspective. Moreover, ten
methods next to those that adopt all perspectives analyse the meso perspective (in total 16/30)
and eighteen take the macro perspective (in total 24/30). Two methods partially take the
macro perspective (making the total 26/30).
16
Approach
Only eight out of the thirty (8/30) methods truly measure impact, with four methods partially
measuring impact (making the total 12/30). The process however, can be measured with all
methods (30/30). A relatively large number of methods, eleven out of thirty (11/30), allow for
the monetarisation of the social impact measured, with one method partially doing so (making
the total 12/30).
The classification of methods shows that despite the development of numerous social impact
methods, only eight of the thirty methods actually measure social impact, and four methods
are capable of partiallyv measuring social impact. Most of the methods have an orientation
towards inputs rather than outputs. While most methods are useful for reporting, hardly any
methods are specifically designed for reporting purposes. With the exception of three
methods, all are useful for evaluation purposes. Only one method, the Hewlett Foundation
Expected Return, is limited to a purely prospective time frame and is therefore only useful for
screening purposes. All methods take a process approach. Moreover, eleven methods are
developed to transfer all effects into monetary units. The methods that truly aim at measuring
impact all have a macro, societal, perspective. All methods are designed to include short term
effects, while only twelve methods are capable of including long term effects.
6. Conclusions
The wide range of social impact measurement methods makes it hard for managers to select a
suitable method for the measurement of the social impact of their social activities. Partially,
the difficulty stems from the lack of consensus on the definition of social impact. However,
the challenges mostly stem from the absence of a categorisation system for these methods. In
this paper, such a classification system has been developed, providing managers with a
framework that allows for the selection of the most suitable method depending on their
specific needs.
In the literature several frameworks, classification schemes, and systems of concepts exist.
However, these concentrate on environmental accounting and environmental management
accounting. The classification system that has been developed in this paper is a combination
of the framework that is dominant in environmental accounting by Schaltegger et al. (2000)
and a framework by Clark et al. (2004) that specifies different approaches used by impact
measurement methods. A number of additional characteristics are included as they are
specifically relevant to social impact methods, such as purpose, perspective and orientation.
Eventually, the classification system includes six characteristics: purposes, methods can be
used for screening, monitoring, reporting, and evaluation; time frame, can be either
prospective, ongoing or retrospective; orientation, methods can be input or output orientated;
Length of time frame, methods can address a short term or a long term time frame;
perspective, methods can use an individual, organisational or community or societal
perspective; approach, methods can use different approaches to measure impact, i.e. process
methods, impact methods, monetarisation methods.
While all methods identified have been specifically developed to measure social impact, this
research shows that only eight of the thirty methods actually do measure social impact. These
methods all adopt a macro, societal, perspective. In view of the rising interest in social impact
measurement the development of this classification will provide managers with a way
forward in seeking to adopt social impact measurement. The classification clarifies the
concept and applicability of social impact tools.
17
This research is limited as the analysis of the methods is based on desk research, combined
with interviews with experts and users of the methods. However, future research could take
this analysis a step further by conducting comparative analyses of the methods in an applied
research setting. Measuring the practicality, reliability and validity of the methods could be
undertaken by using a number of methods to capture the social impact of a single social
activity. This could be extended by selecting a number of similar activities and also
comparing the results across them. These analyses would provide a rigorous way to compare
the features, possibilities and limitations of the methods. Moreover, it might be helpful to
develop a guideline for managers with examples from practice to aid to the process of
choosing a social impact measurement method.
18
References
Aguilera RV, Rupp DE, Williams CA and Ganapathi J 2007, ‘Putting the s back in corporate
social responsibility: A multilevel theory of social change in organizations’, The Academy of
Management, vol. 32, no.3, pp. 836-863.
Ann KB, Allen CA and Matthew AR 1999, ‘Beyond resources: The mediating effect of top
management discretion and values on corporate philanthropy’, Business and Society, vol. 38,
no. 2, pp. 167-187.
Ben-Ner A and v. Hoomissen T 1992, ‘An empirical investigation of the joint determination
of the size of for-profit, nonprofit and governmental sectors’, Annals of Public and
Cooperative Economics, vol. 63, no. 3, pp. 392-415.
Boyne G 2002, ‘Public and Private Management: What's the Difference?’, Journal of
Management Studies, vol. 39, no. 1, pp. 97-121.
Burdge RJ and Vanclay F 1996, ‘Social impact assessment: A contribution to the state of the
art series’, Impact Assessment, vol. 14, pp. 59-86.
Burritt RL and Saka C 2006, ‘Environmental management accounting applications and eco-
efficiency: Case studies from Japan’, Journal of Cleaner Production, vol. 14, pp. 1262-1275.
Clark C, Rosenzweig W, Long D and Olsen S 2004, Double bottom line project report:
Assessing social impact in double bottom line ventures; methods catalog, viewed 28 may
2010, <http://www.shidler.hawaii.edu/Portals/1/resources/DoubleBottomLine.pdf>.
Conner KR 1991, ‘A historical comparison of resource-based theory and five schools of
thought within industrial organization economics: Do we have a new theory of the firm?’,
Journal of Management, vol. 17, no. 1, pp.121-154.
de Bakker FGA, Groenewegen P and den Hond F 2005, ‘A bibliometric analysis of 30 years
of research and theory on corporate social responsibility and corporate social performance’,
Business and Society, vol. 44, no.3, pp. 283-317.
Dentchev NA 2004, ‘Corporate social performance as a business strategy’, Journal of
Business Ethics, vol. 55, no. 4, pp. 395-410.
Ebrahim A 2005, NGOs and Organizational Change: Discourse, Reporting, and Learning,
Cambridge University Press, Cambridge
Eccles RG 1991, ‘The performance measurement manifesto’, Harvard Business
Review, vol. 69, no. 1, pp. 131-137.
Elkington J 1999, Cannibal with forks, the triple bottom line of 21st century business,
Capstone, Oxford.
Elkington J, Emerson J and Beloe S 2006, ‘The value palette: a tool for a full spectrum
strategy’, California Management Review, vol. 48, no.2, pp. 6-28.
Emerson J, Wachowicz J and Chun S 2000, Social return on investment: Exploring aspects of
value creation in the non-profit sector, The Roberts Foundation, San Francisco.
19
Emerson J 2003, ‘The blended value proposition: Integrating social and financial returns,
California Management Review, vol. 45, no. 4, pp. 35-51.
Epstein MJ 2008, Making sustainability work: Best practices in managing and measuring
corporate social, environmental, and economic impacts, Greenleaf Publishing Limited,
Sheffield.
Forbes, DP 1998, ‘Measuring the unmeasurable: Empirical studies of nonprofit organization
effectiveness from 1977 to 1997’, Nonprofit and Voluntary Sector Quarterly, vol. 27. no. 2,
pp. 183-202.
Freudenburg WR 1986, ‘Social impact assessment’, Annual Review of Sociology, vol. 12, pp.
451-478.
Friedman, M 1970, ‘The social responsibility of business is to increase its profits’, The New
York Times Magazine, 13 September, p. 32-33, 122, 126.
Fry LW, Keim GD and Meiners RE 1982, ‘Corporate contributions: Altruistic or for-profit?’,
The Academy of Management Journal, vol. 25, no. 1, pp. 94-106.
Gentile MC 2000, Social impact management, a definition, Discussion Paper II Aspen ISIB:
The Aspen Institute, viewed 28 may 2010, <http:// www.aspenisib.org>.
GRI 2006, Sustainability reporting guidelines (G3), Global Reporting Initiative, Amsterdam.
Husted BW and de Jesus Salazar, J 2006, ‘Taking Friedman seriously: Maximizing profits and
social performance’, Journal of Management Studies, vol. 43, no. 1, pp. 75-91.
IPC 2008, PSIA gauging poverty impacts, Poverty in Focus series 14, International Poverty
Centre, Brasilia.
IPIECA 2008, Creating successful, sustainable social investment; guidance document for the
oil and gas industry, International Petroleum Industry Environmental Conservation
Association, London.
Ittner CD and Larcker DF 1998, ‘Innovations in performance measurement: Trends and
research implications’, Journal of Management Accounting Research, vol. 10, pp. 205-238.
Juholin E 2004, ‘For business or the good of all? A Finnish approach to corporate social
responsibility’, Corporate Governance, vol. 4, no. 3 ,pp. 20-31.
Kolodinsky J, Stewart C and Bullard A 2006, ‘Measuring economic and social impacts of
membershipo in a community development financial institution’, Journal of Family and
Economic Issues, vol. 27, no. 1, pp. 27-47.
Labuschagne C, Brent AC and van Erck RPG 2005, ‘Assessing the sustainability
performances of industries’, Journal of Cleaner Production, vol. 13, no.4, pp. 373-385.
Lamberton G 2005, Sustainability accounting--a brief history and conceptual framework,
Accounting Forum, vol. 29, no.1, pp. 7-26.
Latané B 1981, ‘The psychology of social impact’, American Psychologist, vol. 36, no. 4, pp.
343-356.
20
Lepak, DP, Smith, KG and Taylor, MS 2007, ‘Value creation and value capture: A multilevel
perspective’, Academy of Management Review, vol. 32, no. 1, pp. 180-194.
Loew, T, Fichter, K, Müller, U, Schultz, WF and Strobel, M 2001, Ansätze
der umweltkostenrechnung im vergleich – unveröentlichter endbericht,
Berlin (in German).
Loew, T 2003, ‘Environmental cost accounting: Classifying and comparing selected
approaches’, In M Bennett, PM Rikhardsson and S Schaltegger (Ed.), Environmental
management accounting - purpose and progress, Kluwer Academis Publishers, Dordrecht, pp.
41-56.
London T 2009, ‘Making better investments at the base of the pyramid’, Harvard Business
Review, vol. 5, pp. 106-113.
Maas KEH and Bouma JJ 2005, ‘Sociale meerwaarde van MVO: Een welvaartseconomisch
perspectief’ in NA Dentchev, A Heene, CAJ Herstroter and FJ de Graaf (Ed.),
(Maatschappelijk) verantwoord ondernemen, pragmatisch bekeken, Academia Press, Gent,
pp. 125-137 (Available only in Dutch).
Maas, KEH and Boons, F 2010, ‘CSR as a strategic activity: value creation, integration and
redistribution’, in C Louche, SO Idowu and WL Filho (ed), Innovative CSR, Greenleaf
Publishing, Sheffield, pp. 154-172.
Margolis JD and Walsh JP 2003, ‘Misery loves corporations: Rethinking social initiatives by
business’, Administrative Science Quarterly, vol. 48, no. 2, pp. 268-305.
Matten D, Crane A and Chapple W 2003, ‘Behind the mask: Revealing the true face of
corporate citizenship’, Journal of Business Ethics, vol. 45, no.1, pp. 109-120.
McWilliams A and Siegel D 2000, ‘Corporate social responsibility and financial performance:
Correlation or misspecification?’, Strategic Management Journal, vol. 21, no. 5, pp. 603-609.
McWilliams A and Siegel D 2001, ‘Corporate social responsibility: A theory of the
corporation perspective’, The Academy of Management Review, vol. 26, no. 1, pp. 117-127.
Pearce D, Atkinson G and Mourato S 2006, Cost-benefit analysis and the environment:
Recent development, OECD Publishing, Paris.
Pearce D, Turner RK and Bateman I 1994, Environmental economics, an elementary
introduction, Harvester Wheatsheaf, London.
Porter, ME and Kramer, MR 2006, ‘Strategy and society: The link between competitive
advantage and corporate social responsibility’, Harvard Business Review, Reprint R0612D.
Schaltegger S and Burritt R 2000, Contemporary environmental accounting, issues, concepts
and practice, Greenleaf Publishing, Sheffield.
Schaltegger S, Herzig C, Kleiber O and Muller J 2002, Sustainability management in
business enterprises: Concepts and instruments for sustainable corporation development,
Centre for Sustainability Management (CSM), Luneburg.
Schaltegger S, Hahn T and Burritt R 2000, Environmental management
accounting - overview and main approaches, Working paper, Centre for
Sustainability Management (CSM), Lunenburg
21
Shell 2008a, Managing social performance, delivering benefits, Den Haag, Confidential.
Shell 2008b, Managing social performance, measuring and communicating social
performance, Den Haag, Confidential.
US-EPA 1995, An introduction to environmental accounting as a business
management tool, United States Environmental Protection Agency,
Washington DC.
Verwaal, E, Commandeur HR and Verbeke W 2009, ‘Value creation and value claiming in
strategic outsourcing decisions: A resource-contingency perspective’, Journal of
Management, vol. 35, no. 2, pp. 420-444.
Wainwright S 2002, Measuring impact: A guide to resources, NCVO Publications, London.
Weisbrod B 1988, The non-profit economy, Harvard University Press, Cambridge.
Wikipedia 2008, viewed on 28 may 2010,
<Http://en.wikipedia.org/wiki/Social_impact_assessment>.
Zimmerman, JL 2009, Accounting For Decision Making And Control, McGraw-Hill
Education, New York.
22
APPENDIX A DESCRIPTION OF SOCIAL IMPACT MEASUREMENT
METHODS
1. Acumen Scorecard
Adapted from a description in Clark et al. 2004.
Developed in 2001 by: Acumen Fund in association with McKinsey, a non-profit enterprise that invests
in and grants to both non-profit and for-profit ventures in its portfolio.
‘The system was developed to assist both for profit businesses, and not-for-profit corporations focus on
actions that deliver both immediate results and improve an corporations long term competitive
positioning in changing and dynamic marketplaces.’
‘The system assesses the social ventures investments in Acumen’s portfolio of for-profit and non-profit
corporations. It entails tracking progress on short- and long term outcomes, which is assessed in terms
of outcome milestones and benchmarks.’
http://www.acumensms.com/
2. Atkisson Compass Assessment for Investors (ACAFI)
Adapted from a description in Clark et al. 2004.
This system is developed by AtKisson Inc.in 2000.
‘This method builds on AtKisson’s Compass Index of Sustainability, a tool for assessment of the
sustainability of communities. The framework for investors is designed to integrate with the reporting
guidelines of major CSR standards, particularly the Global Reporting Initiative (GRI) and the Dow
Jones Sustainability Index (DJSI), as a venture matures. The method incorporates a structure with five
key areas: N = nature (environmental benefits and impacts) S = society (community impacts and
involvement) E = economy (financial health and economic influence), and W = well-being (effect on
individual quality of life), and a fifth element, + = Synergy (links between the other four areas and
networking), and includes a point-scale rating system on each of the five areas. Each area has several
indicators each of which has specific criteria. The method has been peer reviewed by corporate
executives, economic academicians, and investment professionals.’
http://atkisson.com/wwd_tools.php
3. Balanced Scorecard (BSc)
Adapted from a description in Clark et al. 2004.
The Balanced Score Card is developed by Robert Kaplan and David Norton in 1992.
‘The Balanced Scorecard proposes that corporations measure operational performance in terms of
financial, customer, business process, and learning-and-growth outcomes, rather than exclusively by
financial measures, to arrive at a more powerful view of near term and future performance. It advocates
integration of these outcomes into corporations’ strategic planning processes. The scorecard is a
framework for collecting and integrating the range of metrics along the Impact Value Chain, and is
adaptable to an organisation’s stage. It helps coordinate evaluation, internal operations metrics, and
external benchmarks, but is not a substitute for them. Recently Kaplan has adapted the Balanced
Scorecard for nonprofits, suggesting that such institutions adopt strategic performance measures that
focus on user satisfaction (Clark et al. 2004).’
http://www.balancedscorecard.org/
4. Best Available Charitable Option (BACO)
Based on internet information, accessed on 29 August 2009, http://blog.acumenfund.org/wp-
content/uploads/2007/01/BACO%20Concept%20Paper_01.24.071.pdf
23
This system is developed by Acumen Fund in 2006
‘Rather than seek an absolute standard for social return across an extremely diverse portfolio, Acumen
Fund looks to quantify an investment’s social impact and compare it to the universe of existing
charitable options for that explicit social issue. Specifically, this tool BACO helps inform investors
where their philanthropic capital will be most effective—answering “For each dollar invested, how
much social output will this generate over the life of the investment relative to the best available
charitable option?” The BACO ratio (for best available charitable option), must be seen as a starting
point for assessing the social impact and cost-effectiveness of investments. The point of the analysis is
to inform our portfolio decision-making with a quantifiable indication of whether our social investment
will “outperform” a plausible alternative.’
http://www.acumenfund.org
5. BoP Impact Assessment Framework
Based on internet information, ccessed on 29 August 2009,
http://www.wdi.umich.edu/files/Conferences/2007/BoP/Speaker%20Presentations/PDF/State%20of%20the
%20Field%20(London%20Final).pdf
The Bottom of the Pyramid Impact Assessment Framework is developed by Ted London in 2007.
‘The aim of the BoP Impact Assessment Framework is to understand who at the base of the pyramid is
impacted by BoP ventures and how they are affected. The framework is developed to evaluate and
articulate impacts, to guide strategy and to enable better investment decisions.
Next to this the system contributes to a deeper knowledge of the relationship between profits and
poverty alleviation and to recognize the poverty alleviation implications of different types of ventures.
It builds upon the different well-being constructs as developed by 1998 Nobel Prize winner Amartya
Sen.’
http://www.wdi.umich.edu/
6. Center for High Impact Philanthropy Cost per Impact
Based on internet information, accessed on 29 August 2009,
http://www.impact.upenn.edu/our_work/documents/WhatisHighImpactPhilanthropy_initialconceptpaperApril2007
_000.pdf
This tool is developed by the Center for High Impacts Philanthropy from the University of
Pennsylvania in 2007.
‘High impact philanthropy means getting the most good for your philanthropic buck. It is the process
by which a philanthropist makes the biggest difference possible, given the amount of capital invested.
In order to assess cost per impact, philanthropists must be able to assess, to the extent possible, its two
components: 1) social impact, as measured by specific, objective criteria for success; and 2) cost, as
measured by the investments made by philanthropists or other sources to realise the impact.
Assessment requires objective, reliable information on what’s effective, what’s not, and how much
capital is required to achieve a given impact. The Center for High Impact Philanthropy aims to deliver
the information and analytic tools required to answer these questions.’
http://www.impact.upenn.edu
7. Charity Assessment Method of Performance (CHAMP)
Based on internet information, accessed on 29 August 2009
http://www.goededoelentest.nl/_shared/champ_juni_2007.pdf and
http://www.goededoelentest.nl/_shared/champ_juni_2007.pdf
The CHAMP method is developed by the Dutch charities test (nationale goede doelen test) in 2006.
‘The performance of charity’s ADT are determined by effectiveness - What did we achieve? - And
efficiency - how fast and in a cost-effective way? Effectiveness and efficiency can be measured on five
distinct levels:
1. Impact on society: how is society is affected by the effect of the charity on their target group?
24
2. Impact on the public: in what way is the situation of the target group demonstrably improved by the
output of the charity?
3. Output: what concrete results are produced by the core activities of the charity using the input factors
(money, volunteers, etc.)?
4. Activities: how effective are the core activities of the charity?
5. Input: how effective and efficient are the activities related to the input factors such as fundraising
and recruiting volunteers?’
‘The CHAMP method provides indicators to measure the performance on all different levels. This tool
is developed to help donators, and volunteers to choose between a wide range of non- profit
corporations.’
http://www.goededoelentest.nl
8. Foundation Investment Bubble Chart
Based on internet information, accessed on 1 August 2009, http://www.gumballuniversity.org/blog/start-a-
venture/metrics-analytical-methods and http://www.gatesfoundation.org/learning/Documents/WWL-profiles-eight-
integrated-cost-approaches.pdf
‘This form of analysis is more of a visualization tool that plots the quantifiable impact on the x-axis,
the percentage of implementation on the y-axis, and the relative size of a foundation’s grant in a given
field. This results in an easy comparison of the performance of corporations across a portfolio and can
have different variables for the x-axis, y-axis and bubble relativity for flexible data display. Foundation
board of directors and senior management teams could use the bubble chart to assess the relative
performance and cumulative foundation investment (or total philanthropic investment) against the
indices of performance they care about most. The analyses can be used to discuss performance, explore
why one program or a group of programs are positioned where they are, and inform future
investments.’
9. Hewlett Foundation Expected Return
Based on internet information, accessed on 1 August 2009, http://www.gumballuniversity.org/blog/start-a-
venture/metrics-analytical-methods and http://www.gatesfoundation.org/learning/Documents/WWL-profiles-eight-
integrated-cost-approaches.pdf
This tool is developed by the William and Flora Hewlett Foundation. This foundation was founded in
1966 to solve social and environmental problems at home and around the world.
‘The method calculates the expected return of investments and is developed to enable foundations To
ask and answer the right questions for every investment portfolio: what‘s the goal? How much good
can it do? Is it a good choice? How much difference will we make? What‘s the price tag? The method
is purely prospective. The expected return provides a systematic, consistent, quantitative process for
evaluating potential charitable investments, and is based heavily on cost-effectiveness analysis and
cost-benefit analysis.’
http://www.hewlett.org/
10. Local Economic Multiplier (LEM)
Based on internet information, accessed on 1 August 2009,
http://www.sustainableseattle.org/conffolder/conffolder/VikiSonntagPresentation.ppt and http://www.applet-
magic.com/LEM.htm
“The Economic Multiplier is an central concept in Keynesian and post-Keynesian economics. A
multiplier is a factor of proportionality that measures how much an endogenous variable changes in
response to a change in some exogenous variable.”
“The local economic multiplier is based on the idea that dollars spend in locally-owned stores will
impact the local economy two or three times more in comparison to dollars spend in national retailers.
The basics of the local multiplier methodology are the identification of income in three rounds. The
first round measures direct income of the study group, the second round measures indirect income, i.e.
25
local spending of the study group, the third round measures induced income, i.e., local spending by
local recipients of study group spending. The local multiplier is the sum of direct, indirect and induced
income divided by direct income.’
11. Measuring Impact Framework (MIF)
Based on internet information, accessed on 24 August 2009,
http://businessfightspoverty.ning.com/profiles/blogs/what-gets-measured-gets-done and
http://www.wbcsd.org/web/measuringimpact.htm
The Measuring Impact Framework is developed in 2008 by the World Business Council for Sustainable
Development.
‘The Measuring Impact Framework is designed to help corporations understand their contribution to
society and use this understanding to inform their operational and long-term investment decisions and
have better-informed conversations with stakeholders. The framework is based on a four-step
methodology that attempts to merge the business perspectives of its contribution to development with
the societal perspectives of what is important where that business operates. Step one, set boundaries:
determine the scope and depth of the overall assessment in terms of geographical boundary (local
versus regional) and types of business activities to be assessed. Step two, measure direct and indirect
impacts: Identify and measure the direct and indirect impacts arising from the corporation’s activities,
mapping out what impacts are within the control of the corporation and what it can influence through
its business activities. Step three, assess contribution to development. Assess to what extent the
corporation’s impacts contribute to the development priorities in the assessment areas. Step four,
prioritise management response: based on steps two and three extract the key risks and opportunities
relative to the corporation’s societal impact, and based on this, develop an appropriate management
response. There is no “one size fits all” way to use this methodology. In order to appropriately tailor the
methodology to the business and its operating context, as well as ensure follow-up actions are taken,
corporations are encouraged to make the assessment as participative as possible, consulting people both
within and if possible external to the corporation.’
http://www.wbcsd.org
12. Millennium Development Goal scan (MDG-scan)
Based on internet information, accessed on 1 August 2009, https://www.mdgscan.com/index.php?
page=Textpage&item=contact_details#page=Textpage&item=about_scan
The MDG-scan is developed in 2009 by the Dutch National Committee for International Cooperation
and Sustainable Development (NCDO) and Dutch Sustainability Research (DSR).
‘The MDG Scan is a tool designed for corporations to measure the positive contribution tot the
Millennium Development Goals (MDGs) and demonstrate their role in the global initiative to reach
these eight MDGs. The MDG Scan measures each corporation's MDG impact by entering key data in a
secured environment. Once the corporation approves the publication of its results, they will be visible
for everyone. The MDG Scan is a practical tool for corporations. Without spending much time or
effort, corporations can gain insight in their MDG Footprint. Based on key data on core business and
community investment activities that can be entered after registering, the MDG scan estimates your
corporation's contribution to each of the MDGs. Real time results generation quickly provides easy-to-
understand insights, globally, per country or per sector / industry. Each corporation can download a
personalized MDG impact results report, which facilitates internal discussions and in-depth analysis of
its MDG impact.’
http://www.mdgscan.com
13. Volunteering Impact Assessment Toolkit
Based on internet information, accessed on 1 August 2009,
http://www.socialeconomyscotland.info/scvo/content/pilot/impact.asp and
https://ecommerce.volunteering.org.uk/PublicationDetails.aspx?ProductID=V309
‘The Volunteering Impact Assessment Toolkit was developed in 2004 by the Institute of Volunteering
Research (IVR) with input from the London School of Economics, The University of East London and
Roehampton University. It is widely recognised that volunteers make a difference to the work of many
26
social economy corporations, but this is mainly supported by anecdotal evidence. The Toolkit is a way
of changing this. It is easy to use, comprehensive and adaptable. It allows corporations to look at the
impact of volunteering on the volunteer, the service user, the corporation and the wider community. It
can help corporations gain a greater understanding of how and why volunteering works in the
corporation as well as gather evidence to support funding bids.’
‘This new toolkit will enable corporations to assess the impact of volunteering on all key stakeholders:
the volunteers, the corporation, the beneficiaries, and the broader community. Results over time can be
compared. Corporations will be able to use it to assess a wide range of impacts, from the skills
development of volunteers to the economic value of volunteering corporations. Positive and negative
results, intended and unintended impacts can be explored.’
http://www.volunteering.org.uk
14. Ongoing Assessment of Social Impacts (OASIS)
Adapted from a description in Clark et al. 2004
Developed in 1999 by REDF (formerly The Roberts Enterprise Development Fund) a nonprofit
enterprise that creates job opportunities through support of social enterprises that help people gain the
skills to help themselves.
‘REDF developed this system for its internal use and that of the nonprofit agencies in its portfolio to
assess the social outputs and outcomes of the agencies overall, including the social enterprises they
each operate. The system is a customised, comprehensive, ongoing social management information
system (MIS). It entails both designing an information management system that integrates with the
agency’s information tracking practices and needs, and then implementing the tracking process to track
progress on short- to medium term (two years) outcomes.’
http://www.redf.org/
15. Participatory Impact Assessment
Based on internet information, accessed on 24 August 2009,
https://wikis.uit.tufts.edu/confluence/display/FIC/Participatory+Impact+Assessment--+a+Guide+for+Practitioners
and
http://www.devnet.org.nz/conf2002/abstracts/Nowland-Foreman_Sandra.pdf
‘The Feinstein International Center has been developing and adapting participatory approaches to
measure the impact of livelihoods based interventions since the early nineties. Participatory Impact
Assessment (PIA) takes the participatory methodology of these processes and applies it to the original
corporational objectives in asking the critical questions “what difference are we making?” PIA offers
not only a useful tool for discovering what change has occurred, but also a way of understanding why it
has occurred. The framework does not aim to provide a rigid or detailed step by step formula, or set of
tools to carry out project impact assessments, but describes an eight stage approach, and presents
examples of tools which may be adapted to different contexts. A guide for practitioners is available to
demonstrate how PIA can be used to overcome some of the inherent weaknesses in conventional
humanitarian monitoring evaluation and impact assessment approaches, such as; the emphasis on
measuring process as opposed to real impact, the emphasis on external as opposed to community based
indicators of impact, and how to overcome the issue of weak or non-existent baselines.’
https://wikis.uit.tufts.edu/confluence/display/FIC/Feinstein+International+Center
16. Poverty Social Impact Assessment (PSIA)
Adapted from a description in Clark et al. 2004.
This system has been developed by the World Bank in 2000.
‘PSIA is a systematic analytic approach to “the analysis of the distributional impact of policy reforms
on the well-being of different stakeholder groups, with a particular focus on the poor and vulnerable…”
(PSIA User’s Guide). It is not a tool for impact assessment in and of itself, but is rather a process for
developing a systematic impact assessment for a given project. Its components are not new, but PSIA
27
has been formally articulated as a systematic approach by the World Bank in 2003. The method
emphasises the importance of setting up the analysis by identifying the assumptions on which the
program is based, the transmission channels through which program effects will occur, and the relevant
stakeholders and institutional structures. Then program impacts are estimated, and the attending social
risks are assessed, using analytical techniques that are adapted to the project under study.’
http://www.worldbank.org/psia
17. Public Value Scorecard (PVSc)
Based on internet information, accessed on 24 August 2009,
http://www.exinfm.com/workshop_files/public_sector_scorecard.pdf
The Public Value Scorecard is developed in 2003 by Prof. M.H. Moore, Director of the Hauser Center
for Non-profit Corporations at the John F. Kennedy School of Government at Harvard University.
‘The Public Value Scorecard is based on the concept of the Balanced Scorecard. All the basics of the
Balanced Scorecard– that non-financial measures are important, that process measures are important as
well as outcome measures, that a measurement system ought to support the execution of an agreed
upon strategy – are used but put to work through the use of strategic concept that seems more
appropriate to nonprofits. The ultimate goal of non-profits is not to capture and seize value for
themselves, but to give away their capabilities to achieve the largest impact on social conditions that
they can, and to find ways to leverage their capabilities with those of others. There are three crucial
differences between the BSc and the PVSc. First, in the public value scorecard, the ultimate value to be
produced by the organisation is measured in non-financial terms. Second, the public value scorecard
focuses attention not just on those customers who pay for the service, or the clients who benefit from
the organisation’s operations; it focuses as well on the third party payers. Third, the public value
scorecard focuses attention on productive capabilities for achieving large social results outside the
boundary of the organisation itself.’
18. Robin Hood Foundation Benefit-Cost Ratio
Based on internet information, accessed on 29 August 2009, http://www.robinhood.org/media/121827/q1_2006.pdf
and http://www.partnershipforsuccess.org/docs/ivk/iikmeeting_slides200711weinstein.pdf
The Robin Hood benefit-cost ratio was developed by the Robin Hood Foundation in 2004.
‘In 2004, we determined that for truly effective grant making, we needed to know the value of similar
and dissimilar programs. For example, is a certain job training program a better investment than a
particular education program? To answer this question, Robin Hood developed an innovative
methodology of evaluation, or metrics. First, a common measure of success for programs of all types is
applied: how much the program boosts the future earnings (or, more generally, living standards) of poor
families above that which they would have earned in the absence of Robin Hood’s help. Second, a
benefit/cost ratio is calculated for the program—dividing the estimated total earnings boost by the size
of Robin Hood’s grant. The ratio for each grant measures the value it delivers to poor people per dollar
of cost to Robin Hood—comparable to the commercial world’s rate of return.’
http://www.robinhood.org
19. Social Compatibility Analysis (SCA)
Based on internet information, accessed on 29 August 2009 http://www.ifib.uni-
karlsruhe.de/web/ifib_dokumente/downloads/bfs_abstract.pdf
This tool has been developed in 2003 by the Institute for Sustainable Development at the Zurich
University of Applied Sciences Winterthur (ZHW), Switzerland.
‘The Social Compatibility Analysis (SCA). This method defines objective criteria according to which
social compatibility is evaluated. First, the user of the SCA-tool divides a system into a number of
subsystems, i.e. a product could be divided into subsystems according to the life cycle phases
preproduction, production, use and disposal. Second, relevant evaluation criteria are selected. Finally,
subsystems should be assigned to classes A (highly relevant social problems), B (of medium
relevance), C (of low relevance) or 'not relevant' for all the chosen criteria. The SCA is useful when the
28
social dimension of a project is concerned, when the clarification of differing stakeholder opinions is
needed or when sets of solutions are to be negotiated.’
http://zsa.zhwin.ch
20. Social Costs-Benefit Analysis (SCBA)
Adapted from a description in Clark et al. 2004.
This is a general economic tool for performance measurement. Since the 1990s the traditional cost-
benefit analysis has been extended to include impacts upon the society.
‘Social cost-benefit analysis is a type of economic analysis in which the costs and social impacts of an
investment are expressed in monetary terms and then assessed according to one or more of three
measures: (1) net present value (the aggregate value of all costs, revenues, and social impacts,
discounted to reflect the same accounting period; (2) benefit-cost ratio (the discounted value of
revenues and positive impacts divided by discounted value of costs and negative impacts); and (3)
internal rate of return (the net value of revenues plus impacts expressed as an annual percentage return
on the total costs of the investment.’
21. Social Cost-Effectiveness Analysis (SCEA)
Based on internet information, accessed on 29 August 2009 http://www.caps.ucsf.edu/pubs/FS/costeffectiverev.php
The term cost-effectiveness analysis refers to the economic analysis of an intervention. This is a
general economic tool for performance measurement. Since the 1990s the traditional cost-effectiveness
analysis has been extended to include impacts upon the society.
‘For example, one measure of cost-effectiveness is the cost per HIV infection averted. This is affected
by many factors: intervention cost, number of people reached, their risk behaviors and HIV incidence,
and the effectiveness of the intervention in changing behavior. The purpose of cost-effectiveness
analysis is to quantify how these factors combine to determine the overall value of a program. Cost-
effectiveness analysis can determine if an intervention is cost-saving (cost per HIV infection averted is
less than the lifetime cost of providing HIV/AIDS treatment and care) or cost-effective (cost per HIV
infection averted compares favorably to other health care services such as smoking cessation or
diabetes detection).’
Cost-effectiveness analyses also break down the costs and resources needed to implement interventions
—personnel, training, supplies, transportation, rent, overhead, volunteer services, etc.
22. Social e-valuator
Based on internet information, accessed on 1 August 2009
http://www.socialevaluator.eu/SROItool.aspx
The social e-valuator is developed in 2007 by the d.o.b. Foundation and the Noaber Foundation and
Scholten Franssen, a Dutch consultancy corporation.
The social e-valuator is a web-tool based on the SROI methodology. For further description see
description of SROI.
http://www.socialevaluator.eu
23. Social Footprint
Based on internet information, accessed on 1 August 2009, http://www.sustainableinnovation.org/Social-
Footprint.pdf
‘The social footprint is a measurement and reporting method that corporations can use to manage,
measure and report the sustainability of their impacts on people and society in a broad range of areas. It
is a context-based measurement tool that takes actual human and social conditions in the world into
account as a basis for measuring the social sustainability performance of corporations. The Social
Footprint might be seen as an adaptation of the concept of ecological footprint. Both footprints are
alike in the sense that both are about measuring gaps, but the similarity ends there. In the case of the
29
Ecological Footprint, the gaps of interest to us are between resources we need and resources we are
stuck with; in the case of the Social Footprint, the gaps of interest to us are between resources we need
and resources we have decided to produce. Ecological resources are fixed and limited, social resources
are not. The sustainability metrics make it possible to measure non-financial organisational
performance (e.g., the triple bottom line) against standards of performance. Numerators express actual
impacts on vital capitals in the world, and denominators express norms for what such impacts ought to
be in order to ensure human well-being.’
http://www.sustainableinnovation.org/
24. Social Impact Assessment (SIA)
Based on internet information, accessed on 1 August 2009, http://www.st.nmfs.noaa.gov/tm/spo/spo16.pdf and
http://www.dams.org/docs/kbase/contrib/ins220.pdf
‘The concept of SIA is understood to include adaptive management of impacts, projects and policies
(as well as prediction, mitigation and monitoring) and therefore needs to be involved (at least
considered) in the planning of the project or policy from inception. The SIA process can be applied to a
wide range of interventions, and undertaken at the behest of a wide range of actors, and not just within
a regulatory framework. It is implicit that social and biophysical impacts (and the human and
biophysical environments) are interconnected. The overall purpose of all impact assessment is to bring
about a more sustainable world, and that issues of social sustainability and ecological sustainability
need to be considered in partnership. SIA is also understood to be an umbrella or overarching
framework that embodies all human impacts including aesthetic impacts (landscape analysis),
archaeological (heritage) impacts, community impacts, cultural impacts, demographic impacts,
development impacts, economic and fiscal impacts, gender assessment, health impacts, indigenous
rights, infrastructural impacts, institutional impacts, political impacts (human rights, governance,
democratisation etc), poverty assessment, psychological impacts, resource issues (access and
ownership of resources), tourism impacts, and other impacts on societies.’
http://www.socialimpactassessment.net/
25. Social return Assessment (SRA)
Adapted from a description in Clark et al. 2004.
This system was developed in 2000 by Pacific Community Ventures (PCV), a nonprofit organisation
that manages two for-profit investment funds that invest in corporations that provide jobs, role models,
and on-the-job training for low-income people, and that are located in disadvantaged communities in
California.
‘PCV developed the method for its own use in assessing the social return of each investor and of its
portfolio overall. The system entails tracking progress specifically on the number and quality of jobs
created by PCV’s portfolio corporations. It helps the fund target and improve its services to its
investors and to a group of corporations to which it provides business advisory services. The method is
separate from financial performance assessment.’
http://www.pacificcommunityventures.com/
26. Social return on Investment (SROI)
Adapted from a description in Clark et al. 2004.
Developed in 1996 by REDF (formerly The Roberts Enterprise Development Fund) a nonprofit
enterprise that creates job opportunities through support of social enterprises that help people gain the
skills to help themselves.
‘REDF developed social return on investment (SROI) analysis to place a dollar value on ventures in its
portfolio with social as well as market objectives. The approach combines the tools of benefit-cost
analysis, the method economists use to assess non-profit projects and programs, and the tools of
financial analysis used in the private sector. Conceptually, the approach differs from these established
types of analysis, notably in what is considered a “social” benefit. Practically, it is more accessible to a
30
broad range of users, substituting readily understood terms and methods for technical jargon and
complicated techniques.’
http://www.redf.org/
27. Socio-Economic Assessment Toolbox (SEAT)
Based on internet information, accessed on 1 August 2009
http://www.angloamerican.co.uk/aa/development/society/engagement/seat/
and http://www.angloamerican.co.uk/corporateresponsibility
The Socio-Economic Assessment Toolbox was first launched in 2003 by Anglo American plc.
‘The toolbox builds on several steps. (1) profiling our own operations and our host community, (2)
identifying and engaging with key stakeholders, (3) assessing the impacts of our operations – both
positive and negative – and the community’s key socio-economic development needs, (4) developing a
management plan to mitigate any negative aspects of our presence and to make the most of the benefits
our operations bring, (5) working with stakeholders and communities to help address some of their
broader development challenges they would face even without our presence, (6) producing a report
with stakeholders to form the basis for ongoing engagement with and support for the community.’
http://www.angloamerican.co.uk/
28. Stakeholder Value Added (SVA)
Adapted from a description in Schaltegger et al. (2002).
‘Stakeholder value analysis is based on the stakeholder approach or standard-setting and strategic
management of corporations, which is used to analyse relations between stakeholders (interest groups)
and corporations. Measuring the contribution to corporation value due to stakeholder relations
(stakeholder value) is done in four steps. In the first two steps, the return on stakeholder (RoSt) is
calculated for the corporation in question and the reference corporation (e.g.market average). The RoSt
represents the stakeholder’s relative contribution to the value of the corporation. In the third step the
RoSt of the reference corporation is subtracted from the RoSt of the corporation in view. In the final
step this is multiplied by the corporation’s stakeholder costs to obtain the stakeholder value added.’
http://www.uni-lueneburg.de/csm
29. Toolbox for Analysing Sustainable Ventures in Developing Countries
Based on internet information, accessed on 1 August 2009
http://www.roap.unep.org/pub/TowardstripleimpactEN.pdf
The toolbox for analysing sustainable ventures in Developing Countries is developed by UNEP (United
Nations Environmental Programme) in 2009.
‘The toolbox is developed to answer questions related to the identification of opportunities, the
understanding of the determinants of success and the assessment of costs and benefits appear
repeatedly. It addresses initiatives that support sustainable ventures including donor programmes,
award schemes, private and public investors, professional education programs and policy makers. They
can use the tools to systematically identify, evaluate, advice, and promote sustainable ventures. The
tools respond to three questions that appear over and again in the process of building and managing a
sustainable venture:
Where are opportunities to create value • by meeting needs better and more efficiently?
What factors determine the success of the venture?
What are costs and benefits of the venture for the business, society and the environment?”
http://www.unep.org
30. Wellventure Monitor™
Based on internet information, accessed on 1 August 2009 http://www.wellventuremonitor.nl/About.aspx?Num=0
31
The Wellventure Monitor™ is developed in 2006 by the Fortis Foundation Netherlands (FFN) and the
Erasmus University Rotterdam (EUR).
‘The Wellventure Monitor™ measures the effects of community investment on several aspects. It
makes clear what the target group benefits from the project, but also what the corporation, the
employees, and the social organisation gains from it. The Wellventure Monitor™ provides insight into
the effects of a specific project. But more importantly; it is also possible to see the sum of the different
projects. This way, the long-term benefits of community investment become visible. With the tool,
corporations and corporations can create a survey after finishing a project and send it to those involved
at the corporation, employees of the organisation, and to the target group. The surveys are processed
automatically. The tool can be used to view, analyze, and present the results. Per project, or over a
longer period of time.’
http://www.wellventuremonitor.nl
32
i The primary pursuit of corporations is to create value (Conner 1991). Value refers to the value created
minus cost incurred. This implies that value can be either positive or negative. Value creation is a central
concept in management and organisational literature (Lepak et al. 2007; Verwaal et al. 2009). However, what
actually constitutes value is often left unaddressed in these theories (Maas and Boons 2010).
ii
International Association for Impact Assessment, www.iaia.org .
iii
It must be emphasised that the focus here is on quantitative methods that are able to measure impact on
society. In addition to these methods many qualitative methods exist, e.g. story telling, content analysis, and
word counting. Guidelines, principles and standards such as GRI, AA1000, SA8000, ISO26000, are not
included in this list.
iv
In Appendix A, a short description of social impact measurement tools is provided.
v
When a method, for example, only takes intended impacts into account or makes use of predetermined
indicators for impact measurement it is categorized as ‘partially’.